Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.3 LAdmitted-Fee/PreQual/Technical/Finance | L1 | Admitted-Fee/PreQual/Technical/Finance | |
| 2 | L2₹3.4 L+₹10,382.69 (3.11%)Admitted-Fee/PreQual/Technical/Finance NEDUVODE HOUSE MULIYAR VILLAGE THEKKILFERRY P O KASARAGOD DIST | KASARAGOD | KASARAGOD | KERALA | L2 | Admitted-Fee/PreQual/Technical/Finance | |
| 3 | L3₹3.4 L+₹10,904.92 (3.26%)Admitted-Fee/PreQual/Technical/Finance | L3 | Admitted-Fee/PreQual/Technical/Finance | |
| 4 | L4₹3.5 L+₹13,160.30 (3.94%)Admitted-Fee/PreQual/Technical/Finance | L4 | Admitted-Fee/PreQual/Technical/Finance | |
| 5 | L5₹3.5 L+₹19,144.89 (5.73%)Admitted-Fee/PreQual/Technical/Finance | L5 | Admitted-Fee/PreQual/Technical/Finance |
| Sl No | Description | Qty | Unit | ABDUL RAHIMAN C L4 | ABDUL SHEREEF N L2 | SHARANKUMAR K M L5 | MUHAMMAD SHFVAN K A L1 | Krishnayya Ballal L6 | G MOHAMMED L7 | SHARAFUDHEEN M K L3 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00BUILDING MAITENANCE | ||||||||||
| 1.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 548.99 | kg | 145 ₹79,602.83 Lowest | 150.78 ₹82,775.96 | 152.4 ₹83,665.31 | 146.26 ₹80,294.55 | 153.52 ₹84,280.18 | 156.99 ₹86,185.16 | 149.48 ₹82,062.28 |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 216 | kg | 140 ₹30,240 | 145.17 ₹31,356.72 | 146.74 ₹31,695.84 | 140.81 ₹30,414.96 | 147.81 ₹31,926.96 | 151.16 ₹32,650.56 | 133.93 ₹28,928.88 Lowest |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.68 | cum | 7,666 ₹5,174.55 | 7,168.1 ₹4,838.47 | 7,245.47 ₹4,890.69 | 6,953.06 ₹4,693.32 Lowest | 7,298.47 ₹4,926.47 | 7,463.56 ₹5,037.9 | 7,046.93 ₹4,756.68 |
| 1.00 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 187.2 | sqm | 635 ₹1,18,872 | 653.6 ₹1,22,353.92 | 660.64 ₹1,23,671.81 | 633.99 ₹1,18,682.93 Lowest | 665.48 ₹1,24,577.86 | 680.53 ₹1,27,395.22 | 651.72 ₹1,22,001.98 |
| 1.00 | OD181576/2026-2027:Providing and fixing 150 mm UPVC square gutter pipe over GI clamp of sme profile @1m c/c | 58.5 | metre | 356 ₹20,826 | 203.09 ₹11,880.77 | 273 ₹15,970.5 | 197 ₹11,524.5 Lowest | 275 ₹16,087.5 | 282.96 ₹16,553.16 | 239.16 ₹13,990.86 |
| 1.01 | 15.13.1:Taking out doors, windows and clerestory window shutters (steel or wood ) including stacking within 50 metres lead:Of area 3 sq. metres and below | 4 | each | 200 ₹800 | 115.1 ₹460.4 | 116.35 ₹465.4 | 111.65 ₹446.6 | 117.2 ₹468.8 | 119.85 ₹479.4 | 110.61 ₹442.44 Lowest |
| 1.01 | 9.48.2:Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc | 108 | kg | 180 ₹19,440 Lowest | 191 ₹20,628 | 194.47 ₹21,002.76 | 185.27 ₹20,009.16 | 195.89 ₹21,156.12 | 200.32 ₹21,634.56 | 190.49 ₹20,572.92 |
| 1.01 | 21.1.1.3:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPolyester powder coated aluminium ( minimum thickness of polyester powder coating 50 micron ) | 2.08 | kg | 521 ₹1,084.72 | 462 ₹961.88 | 466.98 ₹972.25 | 448.14 ₹933.03 Lowest | 470.4 ₹979.37 | 481.04 ₹1,001.53 | 481.91 ₹1,003.34 |
| 1.01 | 21.1.2.3:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micorn) | 14.61 | kg | 520 ₹7,597.2 Lowest | 555 ₹8,108.55 | 564.07 ₹8,241.06 | 538.35 ₹7,865.29 | 568.2 ₹8,301.4 | 581.05 ₹8,489.14 | 576.38 ₹8,420.91 |
Tender Value
₹4.2 L
EMD Value
₹10,587
Closing Date
31 Oct 2026, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Assistant Engineer
LIDEW Subdivision Karadukka BP
Annual Plan-K.B.P. 2026-27 - MAITENANCE TO PRE METRIC HOSTEL KARADKA PROJECT NO 176/26-27-HOSTEL BUILDING MAITENANCE-
2026_LSGD_881910_10
TN/02/2026-27/lidew/kdk
Open Tender
Repair and Maintenance Works
Item Rate
KARADUKKA PREMETRIC HOSTEL
Please refer Tender documents.
7 documents required · 7 mandatory
₹935
Yes
₹10,587
Yes
3 Nov 2026
24 Oct 2026
3 Nov 2026
24 Oct 2026
31 Oct 2026
24 Oct 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1BUILDING MAITENANCE | |||||
| 1.001 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 548.99 | kg | - | - |
| 1.002 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 216 | kg | - | - |
| 1.003 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.68 | cum | - | - |
| 1.004 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 187.2 | sqm | - | - |
| 1.005 | OD181576/2026-2027:Providing and fixing 150 mm UPVC square gutter pipe over GI clamp of sme profile @1m c/c | 58.5 | metre | - | - |
| 1.006 | 15.13.1:Taking out doors, windows and clerestory window shutters (steel or wood ) including stacking within 50 metres lead:Of area 3 sq. metres and below | 4 | each | - | - |
| 1.007 | 9.48.2:Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc | 108 | kg | - | - |
| 1.008 | 21.1.1.3:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPolyester powder coated aluminium ( minimum thickness of polyester powder coating 50 micron ) | 2.08 | kg | - | - |
| 1.009 | 21.1.2.3:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micorn) | 14.61 | kg | - | - |
stage.html
html • 0.03 MB
finance_1501484.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.06 MB
176a.pdf
Other Document • 0.06 MB
176c.pdf
Tender Documents • 0.07 MB
176b.pdf
Tender Documents • 0.02 MB
BOQ_1501484.xls
BOQ • 0.26 MB
176d.pdf
Tender Documents • 0.99 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .