Loading…
Loading…
Tender Value
₹7.1 Cr
EMD Value
₹14.3 L
Closing Date
8 Sept 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
SR DEN W
17 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments'' in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover.
The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility Criteria: (Para 10.1 of GCC April 2022)(a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:(i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or(ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or(iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender.
Note for Item 10.1 of GCC April 2022:Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover ofRs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates.In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Definition Of Similar Work for Civil Work : - Construction of building work.
Definition Of Similar Work for Electrical Work : - "Electrification / Rewiring of Station / Building / Project / Yard etc."
104 conditions · 7 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The payment towards earnest money (EMD) against the works tenders should be made as brought out in GCC April 2022, Para 5: (Bid Security) PART I Instructions to Tenderers (ITT) & Para 6 (a to d) of Tender Form (Second Sheet) and as per GCC 2022 ACS 11. Railway Board letter no. 2022|CE-UCTIGCC- 2022[POLICY/Pt.I (E-3320424) dated 13.03.2026.
Any firm recognized by Department of Industrial Policy and Promotion (DIPP) as 'Startups' and Labour Cooperative Societies shall submit Registration Certificate issued by appropriate authority.
The Bid Security shall be deposited either in cash through e- payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure- VIA and shall be valid for a period of 90days beyond the bid validity period
In case, submission of Bid Security in the form of Bank Guarantee, following shall be ensured:
A scanned copy of the Bank Guarantee shall be uploaded on e- Procurement Portal (IREPS) while applying to the tender.
The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document before closing date for submission of bids (i.e. excluding the last 2.3.2 date of submission of bids). (Corrigendum: Para 5(3) ii Part I of GCC has been modified vide Advance Correction Slip No. 5 Railway Board's letter no. 2022/CE-l/CT/GCC-2022/Policy Dated 20.10.2023)
Non submission of scanned copy of Bank Guarantee with the bid on e-tendering portal (IREPS) and/or non submission of original 2.3.3 Bank Guarantee within the specified period shall lead to summary rejection of bid.
The Tender Security shall remain valid for a period of 90 days beyond the validity period for the Tender.
The details of the BG, physically submitted should match with the details available in the scanned copy and the data entered during bid submission time, FAILING WHICH THE BID WILL BE REJECTED.
The Bank Guarantee shall be placed in an envelope, which shall be sealed. The envelope shall clearly bear the identification "Bid 2.3.6 for the ***** Project" and shall clearly indicate the name and address of the Bidder. In addition, the Bid Due Date should be indicated on the right hand top corner of the envelope.
The envelope shall be addressed to the officer and address as mentioned in the tender document.
Submission of Tenders: Tenders should be submitted as brought out in GCC April 2022, Para 6: (Care in Submission of Tenders) PART I Instructions to Tenderers (ITT).
ANNEXURE - I - TENDER FORM (First Sheet) is to be submitted mandatorily.
Applicability of rules for this tender
Indian Railways Standard General Conditions of Contract updated with correction slips issued up to date of inviting tender or as otherwise specified in the tender documents. (GCC April 2022)
Indian Railways Unified Standard Specification (IRUSS-2019) updated with correction slips issued up to date of inviting tender or as otherwise specified in the tender documents, if applicable in the contract
CPWD Specifications 2019 Vol I & II updated with correction slips issued up to date of inviting tender or as otherwise specified in the tender documents, if applicable in the contract
Indian Railways Unified Standard Specifications (Works and Material) 2010 updated with correction slips issued up to date of inviting tender or as otherwise specified in the tender documents, if applicable in the contract
IR Specifications/Guidelines updated with correction slips issued up to date of inviting tender or as otherwise specified in the tender documents
Relevant B.I.S. Codes updated with correction slips issued up to date of inviting tender or as otherwise specified in the tender documents
In these Special Conditions of Contract the following terms shall have the meaning hereby assigned to them except where the context otherwise requires.
General Condition of Contract shall mean General Condition of Contract - April 2022 corrected up to date as contained in Western Railway, Engineering department, Indian Railways Unified Standard Schedule of Rates 2019 and Indian Railways Unified Standard Specification 2019 with up to date correction slip, And /OR CPWD Delhi schedule of rate 2019( DSR-Vol.-I and Vol.-2 ,DSR Horticulture and landscaping, specification ( Vol-I and Vol-II) & Horticulture& landscaping with up to date correction slip. Whichever is applicable.
Standard specification shall mean'' Indian railway United standard specification ( Works and materials) Vol.-I &II) And /OR Indian Railway Unified standard schedule of rates (IR USSOR- 2019) and specifications. with up to date correction slip And /OR CPWD Delhi schedule of rate 2019 (DSR-Vol.-I and Vol.-2, DSR- Horticulture and landscaping, specification (Vol-I and Vol-II) & Horticulture& landscaping with up to date correction slip. Whichever is applicable.
Standard schedule Items/rates shall mean the Items/Rates in the Indian Railways Unified Standard Schedule of Rates 2019 and Indian Railways Unified Standard Specification 2019 with up to date correction slip, And /OR CPWD Delhi schedule of rate 2019( DSR-Vol.-I and Vol.-2 ,DSR Horticulture and landscaping, specification ( Vol-I and Vol-II) & Horticulture& landscaping with up to date correction slip. Whichever is applicable
Where there is any conflict in conditions/Specifications contained in various parts, order of precedence will be as given below
Any foot note given by the Railway in the schedule of quantities and rates.
Description of item in the Schedule of Quantities and rates.
Special Specifications
Additional Special Conditions/of Contract.
Standard Specifications.
Special Conditions of Contract & General Conditions of Contract April 2022 corrected upto date
Stamp Duty is applicable as per Stamp Act with latest amendments as applicable in the State.
Rights of the Railway to deal with Tender: As per GCC April 2022, Para 7, 8 & 9 Tender Form (Second Sheet), PART I Instructions to Tenderers (ITT).
The authority for the acceptance of the tender will rest with the Railway. It shall not be obligatory on the said authority to accept the lowest tender or any other tender, and tenderer(s) shall neither demand any explanation for the cause of rejection of his/ their tender nor the Railway to assign reasons for declining to consider or reject any particular tender or tenders.
If the tenderer(s) deliberately gives / give wrong information in his/their tender or creates/create circumstances for the acceptance of his/their tender, the Railway reserves the right to reject such tender at any stage.
(iii)If any partner(s) of a partnership firm expires after the submission of its tender or after the acceptance of its tender, the Railway shall deem such tender as cancelled/contract as terminated under clause 61 of the Standard General Conditions of Contract, unless the firm retains its character as per partnership agreement. If a sole proprietor expires after the submission of tender or after the acceptance of tender, the Railway shall deem such tender as cancelled / contract as terminated under clause 61 of the Standard General Conditions of Contract.
Payment of Royalty Charges
All taxes, royalty charges, etc. of whatever nature in connection with the work including extraction and supply of rubble stone/stone ballast/sand/moorum earth or any other material used on the work shall have to be borne by the Contractor. The Contractor will be required to obtain a royalty clearance certificate from the concerned Revenue Authorities/Collector and produce the same to the Engineer after completion of the supply but before release of the final bill.
Royalties and Patent Rights: (a)The Contractor shall defray the cost of all royalties, fees and other payments in respect of patents, patent rights and licenses which may be payable to patentee, licensee or other person or corporation and shall obtain all necessary licenses. (b)The contractor shall indemnify, the Railway or any agent, servant or employee of the Railway against any action, claim or proceedings relating to infringement use of any patent or design any alleged patent or design rights and shall pay any royalties or other charges which may be payable in respect of any articles or materials or part thereof included in the contract. In the event of any claim being made or action being brought against the Railway or any agent, servant or employee of the Railway in respect of any such matters, as aforesaid, The contractor shall indemnify notified thereof. Provided that such indemnify shall not apply when such infringement has taken place in complying with the specific direction issued by the Railway but the contractor shall pay any royalties or other charges payable in respect of any such use.
Final bills of Ballast supply contracts are to be passed on submission of Royalty Clearance Certificate by the contractor from the concerned Revenue Authorities/ Collectors.
SPECIAL CONDITION FOR TAX DEDUCTION
In respect of works, a deduction of 2% from each of the Contractor's bills shall be made in terms of section 194(C) of the Income Tax Act of 1961 & 1991 and as per instructions issued from time to time (Surcharge will also be deducted along with I. Tax as per extent rules).
The Railway will deduct sales tax if leviable in a particular state where the work is going on, the gross amount of each bill while making payment to the contractor(s). The recovery shall be governed as per the guide lines & rates prescribed by the concerned State Government.
Any Other taxes The Contractor shall bear in full all taxes and royalties levied by the State Government and/or Central Government from time to time. This would be entirely a matter between the contractor and State Government/or Central Government. Railway will recover the taxes and royalties through final bills if the contractor fails to pay the taxes and royalties to the Government.
DETAILS OF INSPECTION REGISTER AND RECORDS ARE TO MAINTAINED BY TENDERER ARE AS FOLLOWS:
The Contractor/s shall maintain accurate records, plans and charts showing the dates and progress of all main operations and the Engineer shall have access to this information at all reasonable times. Records of tests made shall be handed over to the Engineer/s representative after carrying out the tests. The following registers will be maintained at site by the Contractor/s.
Site Order Register: The Contractor/s shall promptly acknowledge by putting his signature in the site order against any order given therein by the Engineer or his representative or his superior officers and comply with them. The Compliance shall be reported by the Contractor/s to the Engineer in good time so that it can be checked.
Labour Register: This register will be maintained to show daily strength of labour in different categories employed by the Contractor/s.
LOG book of events: All events are required to be chronologically logged in this book shift wise and date wise.
Cement & steel registers shall be maintained by the contractor.
DISASTER MANAGEMENT "All the available vehicles and equipment's of the contractor can be drafted by the Railway Administration in case of accidents/ natural calamities involving human lives. The payment for such drafting shall be made according to the rates as shall be fixed by the Engineer. However, if the contractor is not satisfied with the decision of the Engineer in this respect he may appeal to the Chief Engineer within 30 Days of getting the decision of the Engineer, supported by analysis of the rates claimed. The Chief Engineer's decision after hearing both the parties in the matter would be final and binding on the contractor and the Railway".
EMERGENCY WORK In the event of any accident or failure occurring in the execution of work/ arising out of it which in the opinion of the Engineer requires immediate attention, the Railway may bring its own workmen or other agency/agencies to execute or partly execute the necessary work or carry out repairs if the Engineer-in-charge considers that the contractor(s) is/are not in a position to do so in time without giving any notice and charge the cost thereof, to be determined by the Engineer- in-charge, to the contractor.
DAMAGE BY ACCIDENT/ FLOOD/ TIDES OR NATURAL CALAMITIES The Contractor shall take all precautions against damages from accidents, floods tides or other natural occurrences. He shall not be entitled to any compensation for his tools, plants, materials, machines and other equipment lost or damaged by any cause whatsoever. The Contractor shall be liable to make good the damage to any structure or part of a structure, plant or material of every description belonging to the Railway covered under the Contract, lost or damaged by him due to any cause during the course of execution of work. The Railway Administration will not be liable to pay the contractor any charge for rectification or repair to any damage which may have occurred from any cause what so ever.
INCLUSION OF LETTER OF CREDIT AS MODE OF PAYMENT For all the tenders having advertised cost of Rs 10 lakh or above, the contractor shall have the option to take payment from Railways through a letter of credit(LC)arrangement. (Railway Board's letter no. 2018/CE-I/CT/9 dated 04.06.2018)
CHANGE IN ADDRESS: Any change in the address of the contractor shall be forthwith intimated in writing to the Railway. The Railway will not be responsible for any loss/ inconvenience suffered by the Contractor on account of his failure to comply with this.
Viramgam : Construction of EI building in connection with upgradation of Indoor Signaling equipment by EI system under jurisdiction of Senior Divisional Engineer (West) - Ahmedabad. (Composite Tender)
DRM-ADI-121-2026-27~WR
DRM-ADI-121-2026-27
Open
Works - General
12 Months
Ahmadabad, Gujarat
₹0
₹14.3 L
17 Aug 2026
17 Aug 2026
25 Aug 2026
192 items across 46 schedules · ₹10,09,17,958.94 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil | cum | 2306 | 177.5 | 4,09,315 |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. | cum | 2250 | 196 | 4,41,000 |
| 3 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | cum | 320 | 2,123.75 | 6,79,600 |
| 4 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources) | cum | 450 | 7,178.75 | 32,30,437.5 |
| 5 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 745 | 392.15 | 2,92,151.75 |
| 6 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. | Sqm | 350 | 842.5 | 2,94,875 |
| 7 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 2050 | 927.25 | 19,00,862.5 |
| 8 | Lintels, beams, plinth beams, girders, bressummers and cantilevers | Sqm | 2200 | 736.4 | 16,20,080 |
| 9 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 1150 | 961.3 | 11,05,495 |
| 10 | Stairs, (excluding landings) except spiral- staircases | Sqm | 250 | 764.95 | 1,91,237.5 |
| 11 | Suspended floors, roofs, landing, beams and balconies (Plan area to be measured) | Sqm | 1275 | 384.3 | 4,89,982.5 |
| 12 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | Kg | 102800 | 107.85 | 1,10,86,980 |
| 13 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | Kg | 98000 | 107.85 | 1,05,69,300 |
| 14 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 750 | 9,504.75 | 71,28,562.5 |
| 15 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 980 | 9,860.4 | 96,63,192 |
| 16 | Add for using extra cement in the items of design mix over and above the specified cement content therein. | Quintal | 945 | 733.5 | 6,93,157.5 |
| 17 | Providing and laying Autoclaved Aerated Concrete (AAC) blocks masonry with 150 mm to 300 mm thick with Grade -1 AAC blocks of density 551 to 650 kg/cum conforming to IS: 2185 (Part 3) in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for separately). | cum | 1000 | 8,333.65 | 83,33,650 |
| 18 | Area of slab upto 0.50 sqm | Sqm | 180 | 5,413.5 | 9,74,430 |
| 19 | Area of slab over 0.50 sqm | Sqm | 65 | 5,136.3 | 3,33,859.5 |
| 20 | Granite work | Metre | 142 | 510.95 | 72,554.9 |
| 21 | Second class teak wood | cum | 5 | 1,42,949.7 | 7,14,748.5 |
| 22 | 30 mm thick shutters | Sqm | 70 | 3,747.3 | 2,62,311 |
| 23 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 50 | 3,167.95 | 1,58,397.5 |
| 24 | With 12 mm mild steel U beading | Sqm | 230 | 939.2 | 2,16,016 |
| 25 | Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). | Each | 350 | 228.85 | 80,097.5 |
| 26 | 300x16 mm | Each | 44 | 216.55 | 9,528.2 |
| 27 | 125x85x5.5 mm (heavy type) | Each | 108 | 268.65 | 29,014.2 |
| 28 | 250x10 mm | Each | 22 | 441.6 | 9,715.2 |
| 29 | 300x16x5 mm | Each | 10 | 322.2 | 3,222 |
| 30 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. | Each | 10 | 854.65 | 8,546.5 |
| 31 | 125 mm | Each | 39 | 256.65 | 10,009.35 |
| 32 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. | Each | 110 | 121.65 | 13,381.5 |
| 33 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. | Each | 50 | 983.15 | 49,157.5 |
| 34 | 250x16 mm | Each | 44 | 260.6 | 11,466.4 |
| 35 | 125 mm | Each | 28 | 66.25 | 1,855 |
| 36 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer- in-Charge. | Metre | 100 | 492.7 | 49,270 |
| 37 | 30 mm thick pre laminated PVC door shutters | Sqm | 80 | 3,663.8 | 2,93,104 |
| 38 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. | Metre | 80 | 570.95 | 45,676 |
| 39 | 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in- charge. | Sqm | 31 | 4,488.95 | 1,39,157.45 |
| 40 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 2000 | 117.35 | 2,34,700 |
| 41 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 5000 | 133.7 | 6,68,500 |
| 42 | Electric resistance or induction butt welded tubes | Kg | 8000 | 194.4 | 15,55,200 |
| 43 | 40 mm thick with 20 mm nominal size stone aggregate | Sqm | 1025 | 614.2 | 6,29,555 |
| 44 | Acid and alkali resistant tile | Sqm | 250 | 1,738.15 | 4,34,537.5 |
| 45 | 25 mm thick | Sqm | 780 | 1,948.25 | 15,19,635 |
| 46 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. | Sqm | 80 | 2,354.7 | 1,88,376 |
| 47 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. | Sqm | 65 | 1,096.55 | 71,275.75 |
| 48 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 200 | 1,112.7 | 2,22,540 |
| 49 | Size of Tile 600x600 mm | Sqm | 900 | 1,553.45 | 13,98,105 |
| 50 | Size of Tile 1000x1000 mm | Sqm | 1060 | 2,089.65 | 22,15,029 |
| 51 | Size of Tile 600x600 mm | Sqm | 300 | 1,623.05 | 4,86,915 |
| 52 | Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent | Sqm | 80 | 4,481.3 | 3,58,504 |
| 53 | 110 mm diameter | Metre | 300 | 377.4 | 1,13,220 |
| 54 | 110 mm | Each | 38 | 136.15 | 5,173.7 |
| 55 | 110 mm bend | Each | 48 | 150.35 | 7,216.8 |
| 56 | 1:6 (1 cement: 6 fine sand) | Sqm | 5940 | 333.35 | 19,80,099 |
| 57 | 1:6 (1 cement: 6 fine sand) | Sqm | 2500 | 450 | 11,25,000 |
| 58 | 1:3 (1 cement : 3 fine sand) | Sqm | 1800 | 300.45 | 5,40,810 |
| 59 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. | Sqm | 5500 | 262.7 | 14,44,850 |
| 60 | New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm | Sqm | 1875 | 223.6 | 4,19,250 |
| 61 | New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) | Sqm | 6000 | 171.1 | 10,26,600 |
| 62 | Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm | Sqm | 8240 | 193.7 | 15,96,088 |
| 63 | With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood | Sqm | 300 | 74.65 | 22,395 |
| 64 | Two or more coats on new work | Sqm | 450 | 155.9 | 70,155 |
| 65 | 32 mm dia | Each | 30 | 80.1 | 2,403 |
| 66 | Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab, including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete. | Each | 80 | 563.9 | 45,112 |
| 67 | Cement concrete prepared with batch mixing machine | cum | 160 | 10,529.35 | 16,84,696 |
| 68 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | Each | 10 | 6,767.4 | 67,674 |
| 69 | W.C. pan with ISI marked white solid plastic seat and lid | Each | 10 | 6,515.55 | 65,155.5 |
| 70 | W.C. pan with ISI marked white solid plastic seat and lid | Each | 10 | 8,006.6 | 80,066 |
| 71 | White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap | Each | 10 | 1,879.2 | 18,792 |
| 72 | 610x510 mm bowl depth 200 mm | Each | 10 | 4,940.8 | 49,408 |
| 73 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. | Each | 10 | 1,648.95 | 16,489.5 |
| 74 | 32 mm dia | Each | 15 | 119.55 | 1,793.25 |
| 75 | Rectangular shape 453x357 mm | Each | 60 | 1,361.8 | 81,708 |
| 76 | Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms | Each | 50 | 115.3 | 5,765 |
| 77 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. | Each | 50 | 168.35 | 8,417.5 |
| 78 | 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. | Each | 50 | 708.95 | 35,447.5 |
| 79 | PN - 16 Pipe, 20mm OD (SDR-7.4) | Metre | 200 | 272 | 54,400 |
| 80 | PN - 16 Pipe, 25mm OD (SDR-7.4) | Metre | 200 | 318.35 | 63,670 |
| 81 | PN - 10 Pipe, 50mm OD (SDR-11) | Metre | 450 | 580.1 | 2,61,045 |
| 82 | PN - 16 Pipe, 20mm OD (SDR-7.4) | Metre | 200 | 477.85 | 95,570 |
| 83 | PN - 16 Pipe, 25mm OD (SDR-7.4) | Metre | 240 | 515.2 | 1,23,648 |
| 84 | PN - 16 Pipe, 25 mm OD (SDR-7.4) | Metre | 150 | 265.05 | 39,757.5 |
| 85 | PN - 10 Pipe, 50 mm OD (SDR-11) | Metre | 300 | 450.95 | 1,35,285 |
| 86 | PN - 10 Pipe, 90 mm OD (SDR-11) | Metre | 400 | 975.3 | 3,90,120 |
| 87 | 15 mm nominal bore | Each | 24 | 85 | 2,040 |
| 88 | 150 mm diameter | Each | 20 | 222.35 | 4,447 |
| 89 | 25 mm nominal bore | Each | 20 | 950.35 | 19,007 |
| 90 | 50 mm nominal bore | Each | 20 | 1,520.8 | 30,416 |
| 91 | 80 mm nominal bore | Each | 20 | 1,904.9 | 38,098 |
| 92 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Per Litre | 10000 | 11 | 1,10,000 |
| 93 | 15 mm nominal bore | Each | 100 | 506.8 | 50,680 |
| 94 | 15 mm nominal bore | Each | 50 | 670.45 | 33,522.5 |
| 95 | 150 mm nominal size square 100 mm diameter of the inner hinged round grating | Each | 16 | 196.95 | 3,151.2 |
| 96 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. | Each | 40 | 111.45 | 4,458 |
| 97 | 150 mm diameter | Metre | 350 | 695.8 | 2,43,530 |
| 98 | 150 mm diameter S.W. pipe | Metre | 200 | 1,179.85 | 2,35,970 |
| 99 | Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) | Kg | 1350 | 539.85 | 7,28,797.5 |
| 100 | Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) | Kg | 1950 | 643.45 | 12,54,727.5 |
| 101 | With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | Sqm | 190 | 1,176.8 | 2,23,592 |
| 102 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in- charge (Door handle, lock and stopper etc. to paid separately) | Sqm | 83.52 | 5,325.9 | 4,44,819.17 |
| 103 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. | Sqm | 108 | 617.05 | 66,641.4 |
| 104 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured. | Sqm | 785.07 | 688.9 | 5,40,834.72 |
| 105 | Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | cum | 90 | 8,042.3 | 7,23,807 |
| 106 | With 15 mm thick Tegular edged light weight calcium silicate false ceiling tiles | Sqm | 538 | 2,207 | 11,87,366 |
| 107 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 560 | 7,387.25 | 41,36,860 |
| 108 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 330 | 9,844.65 | 32,48,734.5 |
| Schedule total | ₹9,66,07,048.94 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
2022-CE-I-CT-GCC-2022-POLYCYDated21.12.2023.pdf
ATTACHMENT
2022-07-05RBA33_2022GSTinWorkContracts.pdf
ATTACHMENT
GCCACSNo11.pdf
ATTACHMENT
2023-04-26GCC2022ACS3.pdf
ATTACHMENT
AnnexureC.pdf
ATTACHMENT
AnnexureE.pdf
ATTACHMENT
AnnexureVIA.pdf
ATTACHMENT
AnnexureVIB.pdf
ATTACHMENT
AnnexureA.pdf
ATTACHMENT
2022-12-13GCC2022ACS2.pdf
ATTACHMENT
AnnexureF.pdf
ATTACHMENT
ImplementationofContractore-MeasurementBook.pdf
ATTACHMENT
AnnexureD_1.pdf
ATTACHMENT
2023-10-20GCC2022ACS5.pdf
ATTACHMENT
AnnexureB.pdf
ATTACHMENT
AnnexureG_2.pdf
ATTACHMENT
2023-08-07GCC2022ACS4.pdf
ATTACHMENT
AnnexureI.pdf
ATTACHMENT
AnnexureH.pdf
ATTACHMENT
GCC2022ACS1.pdf
ATTACHMENT
GCCApril2022.pdf
ATTACHMENT
AdvanceCorrectionSlipNo_10ACS-10.pdf
ATTACHMENT
Recommendedmaker-manufacturerofcivilmaterials.pdf
ATTACHMENT
PCECircularNo88.pdf
ATTACHMENT
2025-01-09GCC2022ACS9.pdf
ATTACHMENT
2024-12-27GCC2022ACS8.pdf
ATTACHMENT
Acceptance of e-Bank Guarantee
ATTACHMENT
2022-CE-I-CT-GCC-2022-POLICY-Pt.Idated25.09.2024.pdf Correction Slip No. 7 GCC April 2022
ATTACHMENT
RB circular for Digging work
ATTACHMENT
SplCondUpgradationofEIsystematViramgam.pdf
ATTACHMENT
SpecialCondition-Electrical.pdf
ATTACHMENT
e-BGPolicyinEPCGCCPMSPSSAGCPGMSDated16.06.2026.pdf
ATTACHMENT
2022-CE-I-CT-GCC-2022-POLICY-Pt.Idated25.09.2024.pdf
ATTACHMENT
RBletterno.2024-CE-ll-CAOCWorkshop-Part-2dated03.06.2024.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].