Special repair of Park in Ward No. 4 MC J.Nagar

Amount

Dressing the ground including cutting & filling uoto 15 cm.2.1

Excavation in foundations, trenches etc. in earth work, lift uptp 1.50 Mtr. Stacking the eacavated soil not more than 3 mtr. Clear from the edge of the excavation & then returning the stacked soil in 15cm. Layers, when required in to plinths sides of foundations etc. consolidating eachdeposited layer by ramming & watering and then disposing of all surplus excavated earth as directed with in a lead of 20 mtrs.

providing and laying in position CC of apecified grade excluding the cast of centring and shuttering - all work up to plinth level :- 4.1.2.( 1:4:8 CC stone aggregate 20mm N/Size )

providing and laying in position CC of apecified grade excluding the cast of centring and shuttering - all work up to plinth level :- 4.1.2.( 1:2:4 CC stone aggregate For RCC work 20mm N/Size )

steel reinforcement for RCCwork including straightening cutting bending placing in position and binding all complete up to plinth ( mild steel

Brick work in arches in super-structure span not exceeding 6 mtrs., using common burnt clay building brick in cement mortar 1:6including centring and shuttering completes

Providing and laying granite stone in flooring 20mm(average)thicknessbase of cement mortar 1:3(1cement:3 sand) laid over and jointed with grey cement slurry mixed withpigment to match the shade of granite stone i/c rubbing and polishing complete. 20mm.thickAS PER THE HP PUBLIC WORK DEPARTMENT SCHEDULEOF RATE 2020 (CODE NO11.56.1jet black )

Providing and laying marble work (Table rubbed and polished) in flooring 20 mm thick base in cement mortar 1:3 ( 1 cement : 3 sand) including jointing with cement mortar 1:2 (1 white cement : 2 marble dust) with an admixure of pigment to match the shade of the marble 20 mm thick all type makrana marble coadno 8.2& 8.2.1

stone work ( machine cut edges ) for wall lining etc ( veneer work up to 10 mtr hight backing filled with a grout of average 12mm CM 1:3 including pointing in white cement mortor 1:2 1 white cement 2 stone dust with an admixture of pigment matching the stone shade ( 8-14-3 white sand stone exposed face fine dressed with rough backing 8.14.5.1(30mm thick )

Providing & laying heavy duty PCC inter locking paver blocks completed m-35 I/C border or curb block grey and red colored over sub –base of 25mm thick sand under neath average thickness of jointed with neat cement slurry mixed with pigment to Mach the shade of block i/c curing rubbing & with out PVC Coting polishing complete ( sub base concrete floor to be paid for separately (60mm thick block . ISI mark Clause 1504( Gray and red colored may be requred ).AS PER THE HP PUBLIC WORK DEPARTMENT SCHEDULEOF RATE 2020 (CODE NO 16.91.1)

marblle work molding

Granite work molding

Rajesh Kumar

NAVEEN KUMAR

Abhishek Sharma

Om Prakash