Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Ref. No.
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹1.1 L
Closing Date
6 Sept 2024, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Satyanand Singh, Ch
POWER GRID CORPORATION OF INDIA LIMITEDCF-17, ACTION AREA-1C, NEW TOWN, KOLKATA-700156
Development of Reservoir iro discharge of Surface water runoff along with recharge of ground water at Binaguri sub station
ER2/NT/W-CIVIL/DOM/E00/24/09161
Open
Civil - All
Lump-sum
New Siliguri
₹2,500
₹1.1 L
6 Aug 2024
6 Aug 2024
6 Sept 2024
6 Aug 2024
4 Sept 2024
6 Aug 2024
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources).
12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand).
Neat cement punning.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) .
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
CARRIAGE OF MATERIALS: By Mechanical Transport including loading,unloading and stacking Earth up to 1km lead.
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge: All kinds of soil
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. 23.1.1 All types of soil: 23.1.1.2 350 mm dia
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs & secured with geosynthetic fibre, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.: 150 mm nominal size dia
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge.
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I).
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)
Honey-comb brick work 10 / 11.4 cm thick with common burnt clay bricks of class designation 7.5 in super structure above & below plinth level upto floor V level with cement mortar 1:4 (1 cement : 4 coarse sand).
Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete along with sand-cement pointing works as per the direction of Engineer-in-charge.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html
RFx.pdf
pdf • 0.05 MB
8-First Envelope and Bid Forms.xls
xls • 2.53 MB
9-Tender BOQ for reference.xlsx
xlsx • 0.02 MB
Drawing.pdf
pdf • 0.40 MB
Scope of Work.pdf
pdf • 0.71 MB
SFQP.pdf
pdf • 2.86 MB
Technical Specification Civil.pdf
pdf • 0.27 MB
02 Section - II ITB SSTE civil.pdf
pdf • 0.80 MB
1 IFB VOL I.doc
doc • 0.52 MB
3 BDS.doc
doc • 0.42 MB
3A Annexure-A (QR).docx
docx • 0.11 MB
3B Annexure-B (BDS).pdf
pdf • 0.07 MB
4-GCC-Civil.pdf
pdf • 0.84 MB
5 -SCC.doc
doc • 0.41 MB
5A-Appendix-I to SCC.doc
doc • 0.43 MB
6A Safety Provisions.pdf
pdf • 0.30 MB
6-Section - VI Forms and Proceedures Vol-I.doc
doc • 0.65 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .