Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹5.9 LAccepted-AOC HOUSE NO RA 288 GANDHI CHOWK SADAR BAZAR KARNAL HARYANA 132001 | KARNAL | HARYANA | 132001 | L-1 | Accepted-AOC LOWEST | |
| 2 | L-2₹5.9 L+₹1,530 (0.26%)Rejected-Finance | L-2 | Rejected-Finance HIGHEST | |
| 3 | L-3₹6.8 L+₹89,422 (15.1%)Rejected-Finance AGGARSAIN CHOWK VILLAGE BHOJPUR POST OFFICE FETEHPUR SAHARANPUR ROAD YAMUNANAGAR HARYANA 135101 | YAMUNANAGAR | HARYANA | 135101 | L-3 | Rejected-Finance HIGHEST | |
| 4 | L-4₹7.0 L+₹1.0 L (17.7%)Rejected-Finance | L-4 | Rejected-Finance HIGHEST |
Tender Value
₹6.9 L
EMD Value
₹13,840
Closing Date
18 Nov 2019, 5:00 pmClosed
Ritesh Nandal
Executive Engineer Electrical Division PWD B and R Br., Ambala Cantt.
Construction of 3 Bays Bus Stand at Khizrabad Distt. Yamuna Nagar (Honble CM Announcement No. 9913, Dated 06.04.2015) (Pdg. High Mast).
2019_HRY_107497_1
PWD/Elect-KNL/Elect-AMB/16591
Open Tender
Construction Works
Works
60 days
Ambala Cantt.
Please refer Tender documents.
3 documents required · 3 mandatory
₹1,000
Executive Engineer, Elect. Division PWD B and R Br
₹13,840
27 Jul 2021
5 Nov 2019
20 Nov 2019
5 Nov 2019
18 Nov 2019
5 Nov 2019
Amount
Moulded case Circuit breakers. 31.12 (c) 15 amp.to 60 amp. 415 V ,10 KA 3-phase. 31.12 c (i) Miniature Circuit Breaker and Isolator. (L)
Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. 31.17 SP MCB of 9 KA breaking capacity 6 amp. to 32 amp. 31.17a) (ii)
Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. 31.21 Galvanised iron pipe 40 mm dia on flushed. 31.21 (xiv)
(Q) Earthing 31.22 Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as equired. 31.22(iii)
Extra for charcoal or coke and salt for G.I. Plate or copper plate earth electrode. 31.22(v)
Pdg. and fixing 25 mm x 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode as required . 31.22(xi)
Pdg. and fixing 25 mm x 5 mm G.I. Strip on surface or in recess for connections etc. as required with all labour and material. 31.22(xv)
Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections . 31.26 16 Sq. mm 2 Core Cable . 31.26 (v) Ard.
25 Sq. mm 4 Core Cable . 31.26 (xIi) Ard.
Supply and erection of suitable compression type brass cable glands for underground Cable. 31.28 10 Sqmm to 16 Sqmm Cable 2 to 4 Core . 31.28 (ii)
25 Sqmm to 50 Sqmm Cable 2 to 4 Core. 31.28 (iii)
Pedestal . (v) Supply and erection of Godrej Almirah typeM.S.pedestal made of 50 mm x 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S.sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars . 31.33 M.S.pedestal of size 750 mm wide , 1200 mm high ,300 mm deep and bottom totally open , duly embeded in cement concrete block of size 900 mm x 450 mm x 200 mm above ground level duly plastered with 12 mm thick 1:4 cement plaster , having a base of size 1050 mm x 600 mm x 250 mm below ground level . 31.33 (iii)
Supply and erection of double door sheet steel enclosures distribution boards suitable for MCBs and ELCBs etc. recessed in wall including bonding to earth with all labour and material requared complete the job in all respect upto the entire satisfaction of the Engineer-in Charge of the work. 31.41 4-way, TP & N (Vertical) (8+12) 31.41 (vi)
S/E of mark double walled corrugated (DWC) HDPE pipe laid 1 Mtr. Below ground level including diging and refilling of earth including cost of suitable size socket cuppler for HDPE pipe including the cost of labour and material required to complete the job. 31.67 HDPE Pipe 63/50 outer dia / inner dia. (i)
Supply and erection of module case circuit breaker single pole/ 4 pole on wall /on existing pedestal including bounding to earth and making necessary connection required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 31.69 4 pole MCCB 100 amp v
S/I/T/C of 16 Mtr. Long High Mast manufactured from B.S.E.N. 10025 or equivalent grade material in, 2 (two) section hot dip, galvanized inside & outside in single dip, suitable for wind velocity as per IS 875 Part-3 suitable for 9/12 nos. Luminaire loading fully motorized (power tool) with starter & cable complete along with standard accessories supplied by the manufacturer with 3 nos. steel wire rope double drum system and twin dome aviation light with LED without foundation but including cost of set of foundation nut and bolds, installation at site complete the Job in all respect upto the Entire statisfaction of Engineer in Charge of the work 31.83 (ii) Thickness of Top Section = 3mm (Minimum) Bottom Section = 4mm (Minimum) Top Dia = 150mm Bottom Dia = 410mm Thickness of Galvanization Top = 65 micron (Min) Bottom = 85 micron (Min)
Supply of LED Flood Light BARGEG 200W Make Bajaj/ Philips/ Crompton as per approved make with all labour and material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of work. Surya/Wipro/ Havells NS-1
S/E of 0.3 KVA capacity inverter with SMF battery for aviation light in existing panel i/c the cost of labour charges and connections and petty material etc. for complete in all respect upto the entire satisfaction of the engingeer-in-charge of work. Make of Inverter:- Lumineous / Microtek/ Sukam. make of Battery:- Exide/ Amron. NS-2
Foundation of 16 Mtr High Mast as per the Drawing of High Mast (L.S) NS-3
m/s shajal electric wroks
Radhey Krishan Enterprises
Bakshi Brothers
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .