Widening of the Road from Sikh Basthi to Mahadevapuram Junction in ward no. 277, Mahadevapuram, Gajularamaram Circle-57, CMC

Engaging of Hitachi on hire basis including all charges

Engaging of Tipper 5.5 cum capacity

Hard rock (blasting prohibited)-Upto 3 m depth

Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work excluding dewatering charges etc as per SS - 20 B (APSS 308). Ordinary soils-Mechcanical Means-Upto 3 m depth

Construction of granular sub-base by providing well graded material / Close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller 80-100 kN / Vibratory Roller to achieve the desired density, complete as per Technical Specification Clause 401 MORD / MORTH.

Providing, laying and spreading, compacting graded stone aggregate to wet mix macadam including premixing the water at OMC in mechanical mixer carriage of mixed material by tipper to site, laying uniform layers in sub base and compacting with smooth wheel roller of 80-100KN including cost and conveyance and labour charges etc., complete. (without paver)

Supply and placing of the Ready Mix Concrete (RMC) M10 grade Standard Design Mix Concretegrade as per IS4926- 2003 with minimum cement content as per IScode456- 2000 using 20mm graded metal, from standard suppliers approved by the department including pumping, laying concrete, vibrating / screed / pan vibrating, curing etc. complete but excluding cost of steel and its fabrication charges, centering, shuttering for finished item of work.

Supply and placing of impermeable plastic sheet 125 micron thickness as a separation membrane over lean mix including cost and conveyance of all materials etc complete

Supply and placing of the Ready Mix Concrete (RMC) M30 grade Standard Design Mix Concretegrade as per IS4926- 2003 with minimum cement content as per IScode456- 2000 using 20mm graded metal, from standard suppliers approved by the department including pumping, laying concrete, vibrating / screed / pan vibrating, curing etc. complete but excluding cost of steel and its fabrication charges, centering, shuttering for finished item of work.

Providing of mechanical trawelling, finishing with sound edges and corners, including hire and operation charges complete for finished item of work.

Saw cut joints for freshly laid concrete pavements including all material and labour charges

Carting away the surplus excavated earth from the work site with a lead of 15 Km beyond initial lead including loading, unloading and conveyance but excluding stacking charges, etc., complete

Supply of precast cc blocks (of 600*325*150/115mm) for kerbing made with rubberized moulds of M30 grade design mix with 350 kgs cement/cum of concrete.20mm – 6mm nominal hard granite machine crushed metal at 0.80 cum/cum of concrete and sand at 0.4 cum/cum of concrete including cost and conveyance of all materials like sand water coarse aggregate etc complete. Including Fixing of Precast kerbing blocks of 600 mm length true to its alignment as specified by the Dept to form divider including pointing with cement mortar (1.3) prop Cost and conveyance of all materials like cement, sand, water etc to site, including curing and labour charges for mixing, etc complete.-(For footpath and Central Median)

Painting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new, plastered / concrete surfaces as per drawing and Technical Specification Clause 1701MORD.