Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹31.6 Cr
EMD Value
₹31.6 L
Closing Date
25 Nov 2026, 6:00 pm2d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Engineer,Tapi (R & B) Division,Vyara
CONSTRUCTION OF MAJOR BRIDGE ON UP STREAM SIDE OF EXISTING BRIDGE ACROSS TAPI RIVER ON SONGADH-UKAI-SERULA ROAD (MDR). (Ch. 14/6 to 15/0)
357530
19 OF 2026-27
Open
Civil Works - Bridges
Works
Tapi
18 documents required · 17 mandatory · 1 optional
₹18,000
Executive Engineer,Tapi (R & B) Division,Vyara
₹31.6 L
25 Nov 2026
22 Oct 2026
26 Nov 2026
22 Oct 2026
12 Nov 2026
22 Oct 2026
120 days
No. figures
1 Diversion of watercourse / providing cofferdam and bund or 1.00 Job 22946856.60
island,Z-type sheet piling With Jack up Rig as may be
necessary for foundation and maintaining the same for the
Two monsoon period or Completion of the work as may be
necessary.
2 Marking out center line of the bridge and various other 1.00 No. 101000.00
component structure and complete lineing out and leveling
with total station, theodolite ,levels ,including constructing
necessary pillars for lines level and establishing necessary
bench mark etc. Complete as directed.
3 Providing flood gauge marks on substructure as per design 43.00 Rmt 160.67
including painting complete.
4 Excavation for foundation in sand , gravel , clay soft soils &
murrum etc. including sorting and strutting and dewatering
as necessary and disposing of excavated stuff as directed.
(A) Depth up to 3.0 M. 1049.00 Cu.m. 501.09
(B) Depth from 3.0 m to 6.0 m 376.00 Cu.m. 586.99
5 Empty boring through all Sorts of strata for providing 1.50 728.00 Rmt 4829.92
Mt. dia. R.C.C. bored piles to required depth including
providing necessary casing pipe with all plants and
equipment's as required complete.
6 Empty boring in Hard rock for providing 1.50 Mt. dia. R.C.C. 447.00 Rmt 8114.34
bored piles to required depth including providing necessary
casing pipe with all plants and equipment's as required
7 Providing 6mm thick steel liner for piles including fabricating 147.50 MT 47323.73
and setting out as per detail drawing as directed.
8 Providing and laying controlled cement concrete of M 35 for 2660.00 Cu.m. 4942.86
R.C.C. bored piles of 1.50 mt. dia. including ramming,
vibrating and finishing excluding T.M.T Reinforcement
9 Providing and fixing in position Fe 550D TMT for R.C.C. 559.00 MT 80313.28
bored piles as per detailed drawing, including cutting,
bending hooking tying and welding . complete and including
forming the cage and lowering it in position.No Extra
Payment Shall Be Made For Lap & Chair.
10 Static Load testing of foundation piles including loading with 1250.00 MT 187.38
necessary kentledge or any other suitable method as directed
with all arregement & equipment required.
11 Dynamic Load testing of foundation piles including loading 3.00 NO. 35767.11
with necessary kentledge any other suitable method as
directed with all arrangement & equipment required.
BILL OF QUANTITIES
Item Rate In
Description of Item Quantities Unit Amount
No. figures
12 Conducting Pile low strain integrity test as per ASTM D 5882- 80.00 NO. 1211.62
96 code of American Society for Testing on cast -in situ RCC
pile of 1200 mm & 1500 mm diameter inclusive of analysis
with all contractor's equipment, manpower, site preparation,
lead and lifts etc. complete as per standard procedure, and
as directed by the Engineer in charge. Note:- Rate is
inclusive All equipment, All labour and consumable required
& Mobilization of equipment
13 Providing & filling in foundation as base course with ordinary 89.00 Cu.m. 3615.80
cement concrete of M 15 mix and providing necessary
vertical pin headers including formwork vibrating ramming &
curing complete.
14 Providing and casting in-situ controlled cement concrete of 2135.00 Cu.m. 5118.68
M 35 For R.C.C. work for Raft including necessary form work
vibrating, curing and finishing complete.
15 Providing and fixing in position Fe 550D TMT for R.C.C. pile 261.00 M.T 80539.28
cap as per detailed drawing, including cutting, bending
hooking tying and welding . complete and including forming
the cage and lowering it in position.No Extra Payment Shall
Be Made For Lap & Chair.
16 Providing and casting in situ controlled cement with of M40
for R.C.C. work in piers and abutment as per drawing
including centering shuttering scaffolding where necessary
laying vibrating curing and finishing complete.
a Height from 0.0 M to 5.0 M 304.00 Cu.m. 5501.47
b Height from 5.0 M to 10.0 M 217.00 Cu.m. 5818.61
c Height from 10.0 M & Above 172.00 Cu.m. 6610.45
17 Providing and fixingin position fully moulded restrained 122880.00 Cu.Cm. 0.90
elastometric Bearings as per detailed drawings.
18 Supplying, fitting and fixing in position true to line and level 28800.00 MT 57.77
POT-PTFE bearing consisting of a metal piston supported by
a disc or unreinforced elastomer confined within a metal
cylinder, sealing rings, dust seals, PTFE surface sliding
against stainless steel mating surface, completre assembly
to be of cast steel/fabricated structural steel, metal and
elastomer elements to be as per IRC: 83 part-I & II
respectively and other parts conforming to BS: 5400, section
9.1 & 9.2 and clause 2006 of MoRTH Specifications complete
asper drawing and approved technical specifications.
19 Providing and casting in situ controlled cement concrete of 512.60 Cu.m. 5818.61
M 35 Mix for R.C.C. works in pier cap abutment cap and dirt
wall including controlled cement concrete M 40 bed block or
pedestals of required drawings, centering shuttering,
scaffolding wherever necessary laying vibrating curing and
finishing complete.
20 Providing and laying in position Fe 550D TMT bar 246.40 M.T 80539.28
reinforcement including cutting, bending, hooking and tying
complete as per detailed for the following. (A)Pier
(B)Abutment (C)Abutment cap and Dirt wall (D) Pier cap
(E)seismic arrester (F)Pedestal. No Extra Payment Shall Be
Made For Lap & Chair.
BILL OF QUANTITIES
Item Rate In
Description of Item Quantities Unit Amount
No. figures
21 Providing and casting in situ or precast controlled Cement 3007.00 Cu.m. 22093.75
Concrete M-50 for prestressed concrete work in Super
structure including centering, shuttering, curing, scaffolding,
ramming, vibrating, finishing, lauching or shifting
complete.(I) Deck Slab.(II) Main Girders.(III) Diaphragm or
cross girder.
22 Providing and casting in situ controlled cement concrete M- 117.00 Cu.m. 5990.15
35 for R.C.C. work in superstructure including centering,
shuttering scaffolding, ramming, vibrating curing and
finishing complete. (A) T-Beam and Deck slab type of
superstructure (II) Main and cross Girder
23 Providing and laying in position Fe 550D TMT bar 515.50 M.T 81378.53
reinforcement including cutting, bending, hooking and tying
complete as per detailed for the following. (I) Deck Slab.(II)
Main Girders.(III) Diaphragm or cross girder.
24 Providing and fixing in position to exact profile high tensile 132.30 M.T 72402.66
steel wires of required ultimate strength including bending,
cutting, tying providing necessary standard and anchorages,
sheathing, stressing, grouting, ducts as per detailed drawing
including necessary plant and machinery complete.
25 Providing and casting in situ controlled cement concrete of 403.00 Cu.m. 5611.56
M 40 for average 100 mm thick wearing coat laid as directed
including tamping vibrating finishing curing and filling in
joints with bitumen complete.
26 Provision of an Reinforced cement concrete crash barrier at 733.00 Rmt 12073.54
the edges of the road, approaches to bridge structures and
medians, constructed with M-40 grade concrete with Fe-
550D reinforcement with FBEC conforming to IRC:21 and
dowel bars 25 mm dia, 450 mm long at expansion joints
filled with pre-moulded asphalt filler board, keyed to the
structure on which it is built and installed as per design given
in the enclosure to MOST circular No. RW/NH - 33022/1/94-
DO III dated 24 June 1994 as per dimensions in the
approved drawing and at locations directed by the Engineer,
all as specified as per drawing attached.
27 Providing raling of controlled cement concrete M-35 as per 367.00 Rmt 1395.82
detailed drawings with necessary reainforcement including,
shuttering, laying vibrating and finishing to line and level
complete.(ii) Cast in situ.
28 Providing and laying chequered precast cement concrete tiles 512.00 Sq.m. 528.01
22mm thick with aggegate of sizes upto 6mm in floors,
treads of steps and landings on 20mm thick bed of C.M. 1:6
(1-cement : 6-sand) or L.M. 1:1.5(1-Lime putty : 1.5 coarse
sand) joint with neat cement slurry with pigments to match
the shade of the tiles.
29 Providing G.I. 100 mm. diameter water spouts including 151.00 Each 536.03
necessary iron gratings as per drawings.
30 Providing and fixing marble slab including engraving and 2.00 Each 1012.65
painting complete. (A) size 75 cm x 60 cm x 4 cm
BILL OF QUANTITIES
Item Rate In
Description of Item Quantities Unit Amount
No. figures
31 Providing and casting in situ controlled cement concrete of M 41.00 Cu.m. 5178.27
35 for approach slab including form work curing and finishing
32 Providing and laying in position Fe 550D TMT bar 55.50 M.T 79862.05
reinforcement including cutting, bending, hooking and tying
complete as per detailed for the following. (A) R.C.C. Kerb.
(B) R.C.C. Footpath.(C) R.C.C. Approch slab.(D) Wearing
33 Providing and fixing in position Strip Seal Type Expansion 123.00 Rmt 2057.37
Joint (for movement of 70mm/80mm) as per detailed
drawing, MoRTH specification/ IRC 69 latest Revision.The
rate is inclusive of supplying, fixing with contractor's own
materials, equipments, machineries, labour, transport,
testing, bolts, socket tubes, neoprene sheet/cap etc.
complete. The rate is finished item complete and will be paid
after fixing in all respect.The Contractor shall procure Strip
Seal Expansion Joint, confirming to relevant MoRTH / IRC
specification from reputed manufactures of Strip Seal
Expansion Joint with prior approval of Engineer-in-charge.
34 Providing & laying weep hole in Abutments, and returns by 235.00 Each 84.95
using PVC. pipe of 100mm including laying in proper grade
and jointing the completed as per detailed specification.
35 Providing and laying Filter Media 600mm Thick directed at 198.00 Sq.m. 1248.74
the back of Abutment, return and wing walls as per detailed
specification.
36 Providing and laying of Extruded Bioaxial Polypropylene 2171.80 Sq.m. 224.83
Geogrid 30 KN as per clause no 3102.8 and approval design
and specification with accesories like tie strips,nuts & bolts
and loops/lugs for joining reinforcing elements with the facia
,pannels and overlaps and other protective elements as per
detailed specification.
37 Providing fusion bonded Epoxy coating not less than 175 498.36 M.T. 10162.62
micron thickness and up to 300 micron to reinforcement
bars as per IS-13620-1993/ASTM-775 M including testing of
coating at plant and all taxes (A) 10mm to 16mm dia bar
38 Providing fusion bonded Epoxy coating not less than 175 1139.04 M.T. 7296.24
micron thickness and up to 300 micron to reinforcement
bars as per IS-13620-1993/ASTM-775 M including testing of
coating at plant and all taxes (B) 20mm to 32 mm dia bar
39 Clearing and grubbing road land including uprooting rank 0.30 Hectare 28393.04
vegetation , grass , bushes , shrubs , saplings and trees of
girth upto 300 mm removal of stumps of trees cut earlier and
disposal of unserviceable materials (I) By Mechanical means
in area of light jungle.
40 Box cutting the road surface to proper slope and camber for 793.30 Cu.m. 104.04
making a base for road work including removing the
excavated stuff and depositing on the road side slope as
directed upto 50Mt.lead.
BILL OF QUANTITIES
Item Rate In
Description of Item Quantities Unit Amount
No. figures
41 Earthwork for embankment including breaking clods dressing 782.00 Cu.m. 169.44
With all lead and lift and including watering, rolling, and
consolidation of subgrade in layers at O.M.C. to required dry
density including filling the depressing which occur during
the process using Vibratory roller 8T to 10T. (E) From Borrow
area With all lead & lift.
42 Construction of 200 mm thick compacted coarsed granular 261.50 Cu.m. 731.24
subbase (Grade-I crushed B.T materials of 53 mm to
mm @ 35 %,26.5 mm to 4.75 mm @ 45% ,Below 2.36 mm
@ 20 %) by providing close graded material , mixing in a
mechanical mix plant at OMC,carriage of a mix material to
work site, spreading uniform layers with motor grader on
prepared surface and compacting with vibratory power roller
to achieve desire density , complete clause as per
43 Providing and laying wet mix base course macadam 250 mm 326.80 Cu.m. 751.44
in Two layer (125 mm each layer) using machine crushed
chips as per required gradation mixing with required
optimum quantity of water conveying the mix to site and
spreading to grade and camber with mechanical paver
consolidation by vibratory roller including material, labour,
plant and machinery and equipment etc. complete.
44 Providing and laying 80 mm DBM in single layer using 369.70 M.T 2685.59
crushed stone aggregate BT chips as per required gradation
and using emulsion asphalt as a tack coat @ 2.5 kg /
sqmt and the VG-30 grade asphalt at 45 kg/MT)by total
weight of mix hot laid process using hot mix plant including
heating and mixing asphalt & materials by drum mix process
transporting the mix and laying by paver finisher including
consolidation with vibratory roller including cost of material,
labour, machinery equipment and fuel , oil , lubricant for
plant and machinery using contractor's own plant and
machineries etc. complete
45 Providing and laying 40 mm Bitumen concrete using crushed 1928.70 M.T 3246.14
stone aggregate BT chips as per required gradation and the
VG 30 grade asphalt at 54 kg/MT)by total weight of mix hot
laid process using hot mix plant including heating and mixing
asphalt & materials by hot mix process transporting the mix
and laying by paver finisher including consolidation with
vibratory roller including cost of material, labour, machinery
equipment and fuel , oil , lubricant for plant and machinery
using contractor's own plant and machineries etc. complete .
46 Providing and applying priming coat with emulsion SS1 grade 2009.00 Sq.m. 59.49
at the rate of 7.50 kg/ 10 Sq.mt. including cost of asphalt
and preparing the surface heating and applying etc.
BILL OF QUANTITIES
Item Rate In
Description of Item Quantities Unit Amount
No. figures
47 Road marking with hot applied thermo plastic paints with 205.80 Sq.m. 367.73
reflectorising glass beads on bitumin surface providing and
laying a hot applied thermoplastic compound 2.5 mm thick
includlng reflectorsing glass beads@ 250 gms per sqm area,
thickness of 2.5mm is excluding of surface applied glass beds
as per IRC-35 2015. The finished surface to be level,uniform
and free from sreaks and holes. zebra patta/bump patta
lane/center line/edge line/cut patta. The white color marking
should provide liminance coefficent on cement road shall be
min 130mcd/m2/lux and Asphalt road shall be min
mcd/m2/lux during the service life during the day time. The
marking should meet the performance criteria for night time
reflectivity,wet reflectivity and skid resistnce as mentioned in
the section 15 of IRC35-2015. warrenty for retro reflectivity
shall be two years
48 Hazard Marker Sign :-Providing and fixing sign boards made 2.00 Nos. 3666.30
out of 2.0 mm aluminium sheet / 4 mm ACP (Aluminum
composite Panel); size 90x30 cms. rectangular as per design
of IRC-67-2012. Pre treated with phospheting process & acid
etching; coated with one coat of epoxy primer and two coats
of best quality epoxy paint ;reflectorised with Micro Prismatic
Grade retro refiectivesheeting of Type-11 as per ASTM D-
4956 and latest M.O.S.T.Specifications; 1.8mtr long stand
post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required
and frame fabricated from suitable size iron angle of 35 x
x 3mm; painted with bestquality epoxy coatings in black and
white bends. The details of symbol foreach board shall be as
per theinstruction of engineer in charge. The fixing at site
shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each
leg.including excavation, curing etc.complete under the
supervision of engineer in charge. A warranty for 10 years for
the Retro reflective sheeting from original manufacturer & a
certified copy of 3 year outdoor exposure test report from
third party test lab for the product offered shall be submitted
by contractor. (A) Class-C Type-11 Retro Reflective sheeting
BILL OF QUANTITIES
Item Rate In
Description of Item Quantities Unit Amount
No. figures
49 Regulatory / Mandatory Sign :-Providing and fixing sign 2.00 Nos. 4618.73
boards made out of 2mm aluminium sheet / 4mm ACP
(Aluminum composite Panel); size 60 cms Dia Circle as per
design of IRC-67-2012. Pre treated with phospheting process
& acid etching; coated with one coat of epoxy primer and
two coats of best quality epoxy paint ;reflectorised with Micro
Prismatic Grade retro refiectivesheeting of Type-11 as per
ASTM D-4956 and latest M.O.S.T.Specifications; 3.6mtr long
stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as
required and frame fabricated from suitable size iron angle of
35 x 35 x 3mm; painted with bestquality epoxy coatings in
black and white bends. The details of symbol foreach board
shall be as per theinstruction of engineer in charge. The
fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x
Cms. for each leg.including excavation, curing etc.complete
under the supervision of engineer in charge. A warranty for
10 years for the Retro reflective sheeting from original
manufacturer & a certified copy of 3 year outdoor exposure
test report from third party test lab for the product offered
shall be submitted by contractor. (A) Class-C Type-11 Retro
Reflective sheeting
50 Chevron sign :-Providing and fixing sign boards made out of 7.00 Each 4681.35
1.5mm aluminium sheet / 3mm ACP (Aluminum composite
Panel); size 60x50 cm as per design of IRC-67-2012. Pre
treated with phospheting process & acid etching; coated with
one coat of epoxy primer and two coats of best quality epoxy
paint ;reflectorised with Micro Prismatic Grade retro
refiectivesheeting of Type-11 as per ASTM D-4956 and latest
M.O.S.T.Specifications; 3.3 mtr long stand post of 75 x 75 x
6mm / 65NB Circular MS Pipe as required and frame
fabricated from suitable size iron angle of 50 x 50 x 5mm;
painted with bestquality epoxy coatings in black and white
bends. the details of symbol or inscription / numerals for
each board shall be as per the instruction of engineer in
charge.The fixing at site shall be in 1:2:4 CC blockof size
x 45 x 60 Cms. for each leg.including excavation, curing
etc.complete under the supervision of engineer in charge. A
warranty for 10 years for the Retro reflective sheeting from
originaa manufacturer & a certified copy of 3 year outdoor
exposure test report from third party test lab for the product
offered shall be submitted by contractor. (A) Class-C Type-11
Retro Reflective sheeting
51 Providing and fixing hectometer as per I.R.C. type design 2.00 Each 356.00
including painting lettering etc. complete fixing in C.C.
BILL OF QUANTITIES
Item Rate In
Description of Item Quantities Unit Amount
No. figures
52 Cat Eye/ Road Stud / RPM: Supplying Raised Pavement Markers 206.00 Each 217.41
made of polycarbonate and ABS moulded body and reflective
panles with micro prismatic lens (No Glass lens) capable of
providing total internal reflection of light entering the lens face and
shall support a load of 13635 kgs. tested in accordance to ASTM D
4280 Type H and Complyinh to Specification of Category A of
MORTH Circular No RW/NH/33023/10-97 -Do III Dt 11.06.
The height, width and length shall not exceed 20mm, 130 mm and
130mm and with minimum reflective area of 13 sqcm on each side
and the slope to the base shall be 35+/-5 degrre. The body of the
marker should having finger grip for easy and accurate placement
and application with epoxy/ bituminous Adhesive as recommended
by the manufacturer of the marker. The color of the marker should
be as per the IRC 35-2015 and as directed by Engineer-in-charge
53 Providing and casting in situ controlled cement concrete of M-35 75.79 Cu.m. 5501.47
for R.C.C. return as per drawings including centering shuttering,
scaffolding where necessary, laying vibrating, curing and finishing
I/We am/are willing to carry out the work at …...................................................…% above/below percent (Should be
written in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.
Estimated amount put to tender Estimated amount put to tender
Deduct………% below Add………% Above
In words In words
Note 1:-The Contractor shall exhibit a board with detailed specification and details of work as directed by the
Engineer-In-Charge for which no extra payment shall be made.
Note 2-GST and Income tax TDS will be deducted at a source while making payments of bills.
Note 3-The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
Note 4-In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-
10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is
a change as per actual mix design the cost of difference of cement consumption have been deducted from the
rate of original item at the rate of input rate mentioned in all the tender.
Executive Engineer
Tapi (R & B) Division
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
SBD-hindustan bridge.pdf
PQ-hindustan bri.pdf
BOQ-hindustan bridge.pdf
specification -hindustan bridge.pdf
Spe. conditions.pdf
GR.pdf
drawing Hindustan Bridge SH-1.pdf
drawing Hindustan Bridge SH-2.pdf
TEST SCH.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .