REPAIR AND MAINTENANCE OF SECURITY STREET HIGH MAST SOLAR LIGHT SYSTEM AND OTHER CONNECTED WORKS AT NAD BHEEMUNIPATNAM AND INS KARNA

Amount

M&L for taking down high pressure SV/MV/MH/FTL/LED street light fittings and flood Light fittings of any wattage/ any height of pole/walls/ any location for repairs or replacement of burnt out the accessories and rectifying the fault etc. complete all as specified and as directed by the Engineer-in-Charge. Note: LED drivers, surge protection and cable etc. shall be measured separately under relevant items of this schedule.

S&F in repairs, LED street light fitting pressure die cast aluminium housing with heat resistant toughened glass & IP 65 protection luminaries of capacity 60 Watt complete all as specified and as directed by the Engineer-in-Charge. Make: Crompton Cat. Part No.LSTP-60-CDL-M or C&S Indus series Cat. Part No INDUS/60W/LS or equivalent in Havells/Bajaj/Philips

S&F LED street light fitting pressure die cast aluminium housing with heat resistant toughened glass & IP 65 protection luminaries of capacity 45 Watt complete all as specified and as directed by the Engineer-in-Charge. Make: Crompton Cat. Part No.LSTS-45-CDL-M or C&S Indus series Cat. Part No.INDUS/45W/LS or equivalent in Havells/Bajaj/Philips

S&F LED street light fitting pressure die cast aluminium housing with heat resistant toughened glass & IP 65 protection luminaries of capacity 30 Watt complete all as specified and as directed by the Engineer-in-Charge. Make: Crompton Cat. Part No.LSTS-30-CDL-M or C&S Indus series Cat. Part No.INDUS/30W/LS or equivalent in Havells/Bajaj/Philips

S&F LED Flood light fitting pressure die cast aluminium housing with heat resistant toughened glass & IP 65 protection luminaries of capacity120 Watt complete all as specified and as directed by the Engineer-in-Charge. Make: Crompton Cat. Part No.LFLN-100-CDL-60M or C&S Indus series Cat. Part No.INDUS/100W/LS or equivalent in Havells/Bajaj/Philips

S&F LED Flood light fitting pressure die cast aluminium housing with heat resistant toughened glass & IP 65 protection luminaries of capacity 200 Watt complete all as specified and as directed by the Engineer-in-Charge. Make: Crompton Cat. Part No.LFSO-200-CDL-60/M or C&S Indus series Cat. Part No.INDUS/200W/LS or equivalent in Havells/Bajaj/Philips

S&F in repairs, LED flood light 250 W, 230 Volts luminairy with pressure die-cast aluminium housing IP 65 protection, any height and any location including internal prewired with all materials complete all as specified and as directed by the Engineer-in-Charge. Make: Crompton Cat. Part No.LFLPI-250-CDL/60 or equivalent in Phillips/C&S/Havells/Wipro

S&F in repairs, LED flood light 400 W, 230 Volts luminairy with pressure die-cast aluminium housing with heat resistant toughened glass & IP 65 protection, any height and any location including internal prewired with all materials complete all as specified and as directed by the Engineer-in-Charge. Make: Crompton Cat. Part No.LFLPI-400-CDL/60 or equivalent in Phillips/C&S/Havells/Wipro

S&F in repairs, 10 KV surge for LED street light, 230 Volts, 50 Hz compatible for industrial & outdoor LED fixtures up to rated power of 75 W to 150Wcomplete all as specified and as directed by the Engineer-in-Charge. Make: Crompton Cat. No.SRPS-10K-440 or equivalent in Phillips/C&S/Havells/Wipro

S&F in repairs, 5 KV surge for LED street light, 230 Volts, 50 Hz compatible for industrial & outdoor LED fixtures up to rated power of 75 W complete all as specified and as directed by the Engineer-in-Charge. Make: Crompton Cat. No.SRPS-5K-440 or equivalent in Phillips/C&S/Havells/Wipro

S&F in repairs, 5 KV surge for LED street light, 230 Volts, 50 Hz compatible for industrial & outdoor LED fixtures rated power above 75 W and up to 150 W complete all as specified and as directed by the Engineer-in-Charge. Make: Crompton Cat. No.SRPS-HP-5K-440 or equivalent in Phillips/C&S/Havells/Wipro

S&F in repairs, drivers for LED street lights 25W/30W, 230 Volts, 50 Hz complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, drivers for LED street lights 45W/60W, 230 Volts, 50 Hz complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, drivers for LED flood lights 100W/120W, 230 Volts, 50 Hz complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, drivers for LED flood lights150W/200W, 230 Volts, 50 Hz complete all as specified and as directed by the Engineer-in-Charge.

Supply, laying and testing 3 core round flexible cable 1.5 Sq.mm. PVC insulated, 1100 Volts grade, PVC sheathed with two runs of single core multistranded FLRS copper conductor along with one run of necessary earth continuity conductor of 1.5 Sq.mm. complete all as specified and as directed by the Engineer-in-Charge.

S&F digital time switches with battery back up 1100 hours with current capacity 16 A programmable every 1min with 1 changeover and total 28 programs complete all as specified and as directed by the Engineer-in-Charge. Make: Indoasian Cat. Part No.TDA43110 or equivalent in C&S/Havells

S&F in repairs contactor ML-2 of capacity of 32 Amps AC 3 phase heavy duty including taking down old unserviceable contactor complete all as specified and as directed by the Engineer-in-Charge. Make: L&T/SIEMENS/C&S

S&F in repairs contactor ML-3 of capacity of 40 Amps AC 3 phase heavy duty including taking down old unserviceable contactor complete all as specified and as directed by the Engineer-in-Charge. Make: L&T/SIEMENS/C&S

S&F timelite distribution board 32 Amps, 3 pole, 230 volts digital time switch complete all as specified and directed by Engineer-in-Charge. Make: Indoasian cat No.TL032DB0 or equivalent model in L&T/C&S/SIEMENS

M&L for cleaning the swaged steel tubular street light poles of 9/11 meters height including GI pipe of street light fitting and preparation of surfaces by cleaning including scrapping up old corroded paint/dirt/dust/rust carefully and applying two coats of aluminium paint over one coat of metal primer and marking of zebra crossings up to a height of 1.0m above the coping with black and yellow strips of synthetic enamel paint including writing of pole numbers and two coats of colour washing on PCC coping surfaces complete all as specified and as directed by the Engineer-in-Charge.

M&L for cleaning the pre-stressed cement concrete street light poles of 9/11 meters height, preparing old plastered or unplastered surfaces and applying two coats of cement based paint over one coat of primer including writing of pole numbers and two coats of colour washing on PCC coping surfaces complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs GI bracket suitable for street light fitting made out of 40mm dia. GI tubing of light grade bent to shape of 1.5m length complete including taking out old one complete all as specified and as directed by the Engineer-in-Charge.

Supply, laying and testing XLPE insulated,screened,PVC bedded,galvanised steel strip or wire armoured,electric power cables (heavy duty) 1100 Volts grade stranded aluminium conductor of size 25 sq mm 4 core complete all as specified and as directed by the Engineer-in-Charge.

Supply and laying LT underground cable XLPE insulated and sheathed armoured cable 1100 Volts grade of size 4 core 10 Sq.mm. aluminium conductor in trenches/poles and connecting with all accessories including taking out the old unserviceable cable complete all as specified and as directed by the Engineer-in-Charge.

All as per Item No.24 above but 4 core 16 Sq.mm. size cable.

Excavation in trenches n. exc. 1.5m wide and n. exc. 1.5m depth and getting out soft/loose soil for laying of under ground cable complete all as specified and as directed by the Engineer-in-Charge.

Excavation in trenches n. exc. 1.5m wide and n. exc. 1.5m depth and getting out hard/dense soil for laying of under ground cable complete all as specified and as directed by the Engineer-in-Charge.

Returning/filling including spreading, levelling and well ramming in layers n. exc. 25cm in thick complete all as specified and as directed by the Engineer-in-Charge.

Removal of surplus soil to a distance n. exc. 50m away and depositing where directed at a level n. exc. 1.5m above the starting point complete all as specified and as directed by the Engineer-in-Charge.

Supply and spread sand in cable trenches and providing cushioning for the cable complete all as specified and as directed by the Engineer-in-Charge. Note: Only punned thickness of 18cm will be measured for the purpose of payment.

Supply and lay common burnt building clay bricks of size 230x115x75mm for protection of cable, laying in trenches complete all as specified and as directed by the Engineer-in-Charge.

Supply and lay GI pipe 25mm dia. light grade for cable protection as per site requirement and sealing the pipe both ends with sealing compound complete including taking down old one complete all as specified and as directed by the Engineer-in-Charge.

S&F HOT moulded (FRP) jucntion box for street light pole with locking arrangementt with IP-65 protection of size 250x250x150mm with 32 Amp 4 way heavy duty terminal block with 10 Amps MCB SP and two steel bracket to fix with pole complete all as specified and as directed by the Engineer-in-Charge. Make: Hansel/Sintex

S&F in repairs, MS clamps suitable for 40mm GI pipe made out of 25x4mm flat iron complete with necessary nuts and bolts complete all as specified and as directed by the Engineer-in-Charge.

S&F rigid non metallic PVC conduit 20mm dia. including all the fittings like Tees, bends, elbows, reducers etc. and fixtures such as couplers, lock nuts, saddles, pipe hooks etc. complete including taking down old one complete all as specified and as directed by the Engineer-in-Charge.

M&L for repairs and maintenance of LED solar lights with charging and topping up distilled water in solar light batteries to maintain necessary specific gravity with replacement of damaged battery lead clamps and worn out leads including taking down and fixing of batteries to its position complete all as specified and as directed by the Engineer-in-Charge.

Taking down high mast light of size 12/15/16 mtr from its base with help of crane,cleaning, greasing, and overhauling of all moveable parts like pullies,steel wire,chain,winches etc,replace unserviceable light if required and refix the mast on its original position complete all as specified and as directed by the Engineer-in-Charge. Note :- Rate to be quoted by contractor including charges for labour,crane,greasing and overhauling and excluding charges for serviceable flood light.

S&F in repairs of Aviation light comprising aluminium housing and polycarbonated enclosure at any heiht and location complete all as specified and as directed by the Engineer-in-Charge. Make:-Bajaj/Havells/Crompton/C&S

S&F in repairs 12 Volt,DC,75Ah/100Ah, maintenance free valve regulated Lead acid(VRLA) solar GEL Battery complete all as specified and as directed by the Engineer-in-Charge. Make:-Exide/Luminous/Su-kam

R AND A ASSOCIATES ENGINEERS CONTRACTORS

SWATHI CONSTRUCTIONS

SRI SAI KRISHNA ENGINEERING WORKS

suresh electricals

CIVILEC ENGINEERING WORKS