SPECIAL REPAIR TO BLDG NO-104, 105, 106 AND 107 AT AFS PHALODI

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premisses complete all as specified and directed by Engineer-in-Charge.

Dismantling of stone slab and tiles of any description or thickness in floors, etc. laid bedded and pointed in any mortar complete all as specified and directed by Engineer-in-Charge.

Material & labour for coloured glazed ceramic tiles in vertical surfaces 450mm x 300mm, 7 mm thick over and including 10 mm thick screeding in CM (1:3) on fair faces of brick work or concrete surfaces , set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-Charge.

Material & labour Non - skid joint free ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile, exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-Charge.

Material & labour for 15mm thick screed bed or bedding layer of cement mortar (1:6), for laying floor finishes complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs vitreous china wash hand basin, white, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets,cutting for and pinning in ends of brackets or erecting of fixing of supply and waste pipe complete all as specified and directed by Engineer-in-Charge.

Material & labour for machine cut kota stone slab flooring 20-25 mm thick over cement screed base 20 mm thick in cement mortar (1:6), laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-Charge.

Material & labour 32mm waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement & other end fixed complete all as specified and directed by Engineer-in-Charge.

Material & labour for kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over 15 mm thick rendering in cement mortar (1:4), laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-Charge.

Demolition cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and directed by Engineer-in-Charge.

Material & labour for 25 mm thick cement concrete flooring type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) surfaces of concrete topping to be finished even and fair (without using extra cement) all as specified and directed by Engr-in-charge.

Material & labour for 75 mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) fininshing the surfaces of concrete topping even and fair (without using extra cement) complete all as specified and directed by Engineer-in-Charge.

Material & labour for cement concrete type B0 1:2:4 (using 12.5 mm graded stone aggregate) delivered on as in padding/ providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges filling and mass concrete etc complete all as specified and as directed by Engr-in-charge.

Supply and fixing for APP based polymeric membrane minimum weighing 3Kg /Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. Not less than 150gms / sqm) laid over compatible primer at 0.3 litre/Sqm, torching the membrane on whole surface uniformly while unrolling the membrane by LPG and sealed with trowel after necessary preparation of surface complete all as per manufactures instructions and finally finished with a coat of bit mastic aluminium paint over the membrane. The over lap joint shall be provided of 75mm in longitudinal direction and 100mm in transverse direction respectively. All the angles, abutments and the drainage outlets shall be sealed with extra care to ensure full bondage complete all as specified and directed by Engineer-in-Charge.

Material & labour for cement concrete type B0 1:2:4 (using 12.50 mm graded coarse aggregate) delivered on providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges filling and mass concrete etc complete all as specified and directed by Engr-in-charge

Material & labour for 10mm thick cement plaster in CM 1:3 mixed with liquid water proofing admixture as per manufacture's instruction on roof surfaces and finishing even and fair to receive APP membrane complete all as specified and directed by Engineer-in-Charge. (Note : LWPA shall be measured and paid separately )

Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 sqm each complete all as specified and directed by Engineer-in-Charge.

Taking down and refixing shutters exceeding 1.0 Sqm and not exceeding 2.0 Sqm each in same opening after resecuring or easing and adjusting complete all as specified & directed by Engineer-in- charge.

Taking down chowkhats or frames (without taking off shutters from the frames) not exceeding 1.5sqm each complete all as specified and directed by Engineer-in-Charge.

Supply and fixing fiber glass reinforced plastic (FRP) door frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and complete all as specified and directed by Engineer-in-Charge.

Supply and fixing to existing door frames 30 mm thick glass fibre reinforced plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engr-in-charge.

Supply and fixing 100 mm butt hinges type B-22 extruded aluminium alloy with galvanised mild steel hinge pin all as specified and directecd by Engr-in-charge.

Taking down chowkhats or frames (without taking off shutters from the frames) exceeding 1.5sqm but n.exc 4.0 sqm each complete all as specified and directed by Engineer-in-Charge.

Supply & fix pressed steel door frames of size 105x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc.,complete all as specified and directed by Engineer-in-Charge.

Supply & fix pressed steel door frames of size 125x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc.,complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 35 mm thick IInd class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauze etc(without sash bars) edges of framing plain , chamfered or rounded fitted with cut and mitred beads for securing,glass etc size of members of shutters as specified in SSR part I ,section 8,clause 8.24 (a); supplied and fitted to chowkhats all as specified and directed by Engr-in-charge.

Material & labour for two coats of synthetic enamel on wooden surfaces of any description (ordinary tint) over one coat of pink primer over 10cm width or girth including preparation of new surface complete all as specified and directed by Engineer-in-Charge.

Material & labour one coat of synthetic enamel on wooden surfaces of any description (ordinary tint) old painted surfaces over 10cm width or girth including preparation of old surfaces complete all as specified and directed by Engineer-in-Charge.

Material & labour two coats of synthetic enamel paint (ordinary tint) on steel surfaces of any description over 10 cm width or girth, not otherwise described over a coat of red oxide, zinc chrome primer including preparation of new steel surface complete all as specified and directed by Engineer-in-Charge.

Material & labour one coat of synthetic enamel paint (ordinary tint) on steel surfaces of any description over 10 cm width or girth, not otherwise described including preparation of old steel surfaces complete all as specified and directed by Engineer-in-Charge.

Supply & fix 150 mm size extruded aluminium alloy handles fabricated type, anodised and polished etc complete all as directed.

Supply and fixing 150mm size aluminium anodised barrel tower bolt of extruded section all as specified and directed by Engineer- in-Charge.

Supply and fixing 300mm aluminium alloy anodised sliding door bolt with hasp,staple and fixed clips of sheet,cast or extruded section and fixed bolts and sliding bolts of extruded section or cast aluminium alloy etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engineer-in-Charge.

Supply and fixing floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor overall lenth of cover plate 150mm etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing stainless steel wire cloth 0.36mm nominal dia of wire and average wirth of aperture 1.40mm and fixed with stainless steel wire staple etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing anodised aluminium ventilator, shutter fixed type without sash bars,aluminium section weighing 0.55kg/m including necessary joining claets,glazing clips,rubber packing,anodised aluminium snap beading screws etc complete all as specified and directed by Engineer-in-Charge.

Supply & fix framed work such as grills, grating, etc., with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe 290–Gde–165 complete all as specified and directed by Engineer-in-Charge.

Material & labour cement concrete 1:2:4 type B–0(using 12.5 mm graded stone aggregate) filling of pressed steel frame and hold fast blocks etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repairs 150 mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs aluminium alloy, anodized, sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast – aluminium alloy and fixed complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs aluminium alloy, anodized, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs 150mm extruded aluminium alloy handles fabricated type anodised complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster or cement lime plaster on brick,stone or PCC walls etc. including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

Material & labour for rendering 15mm thick in two layers first coat 10mm thick in CM 1:6 and second coat 5mm thick in CM 1:4 with wate proofing compound @3% by wt of cement on fair faces of brick work or concrete surfaces, finished even and fair complete all as specified and directed by Engineer-in-Charge. Note : WPC will be measured and paid separately.

Material & labour for rendering 10 mm thick on stone masonry surfaces or surface but other than fair face of brickwork in CM 1:6 finished even and smooth (without using extra cement) complete all as specified and directed by Engineer-in-Charge.

Material & labour for 5mm thick, rendering in cement mortar 1:3 to ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Material & labour for three coats of white wash to un-decorated ceiling surfaces including preparation of new surfaces complete all as specified and directed by Engineer-in-Charge.

Material & labour for one coat of white wash to old decorated plastered surfaces of ceilling including preparation of surfaces complete all as specified and directed by Engineer-in-Charge.

Material & labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed by Engineer-in-Charge.

Complete removal of exisisting treatment on walls and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed by Engineer-in-Charge. .

Material & labour for preparing new plastered or unplastered surfaces of walls and applying two coat of white wash on walls complete all as specified and directed by Engineer-in-Charge.

Material & labour for preparation of new plastered surfaces and applying two coat of oil bound distemper over a coat of primer with 3mm thick wall putty on internal surfaces of walls complete all as specified and directed by Engineer-in-Charge. .

Complete removal of exisisting treatment on walls and applying two coat of oil bound distemper over a coat of primer with 3mm thick wall putty to achieve smooth finish complete all as specified and directed by Engineer-in-Charge.

Material & labour for preparing old decorated plastered or unplastered surfaces of walls and applying one coat of white wash on walls complete all as specified and directed.

Taking up or down 20mm bore steel water tubing galvanised and connections including cleaning for re-fixing or removal to store complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 20 mm bore tubes,medium grade ,galvanised, with all fitting & fixed complete to wall & ceiling or laid in floors including cutting holes into or through brick walls built in cement motar for inserting pipe and making good in cement motar (1:3) or cement concrete (1:2:4) type B-1complete all as specified and directed by Engineer-in-Charge.

Taking up or down 15 mm bore steel water tubing galvanised and connections including cleaning for refixing or removal to store complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 15 mm bore tubes,medium grade ,galvanised, with all fitting & fixed complete to wall & ceiling or laid in floors including cutting holes into or through brick walls built in cement motar for inserting pipe and making good in cement motar (1:3) or cement concrete (1:2:4) type B-1complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair bib taps 15mm bore dia of pipe, cast copper alloy chromium plated, fancy type with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repairs, bib taps 15mm bore dia of pipe cast copper alloy, with crutch or butterfly handles, screwed down, screwed for iron pipe or brass ferrule complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs 20 mm bore dia of pipe Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed by Engineer - in -Charge.

Supply and fixing in repairs 25 mm bore dia of pipe Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 15 mm bore dia of pipe fancy type chromium plated concealed type stop valves, cast copper aloy with crutch or butterfly handles screwed down high pressure, screwed both ends for iron pipe or for unions complete all as specified and directed by Engineer-in-Charge.

Dismantling water tanks capacity exceeding 250 but n exc 500 litres complete all as specified and directed by Engineer-in-Charge.

Disconnecting existing water tanks of capacity exceeding 250 but n.exceeding 500 litrs, setting aside (or lowering if required) for reoairs, cleaning,etc. and hoisting if required reconnecting and refixing in portion including cleaning and removing all scale and dirt,etc. from tanks and from mouths of circulating pipes etc complete all as specified and directed by Engineer-in-Charge. .

Supply and fixing rotational moulded polyethylene water storage tank 500 ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 25mm bore ball brass valve, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and directed by Engineer-in-Charge.

Demolition of RCC slabs, chajjas and similar suspended work complete all as specified and directed by Engineer-in-Charge.

Material & labour for RCC 1:2:4 nominal mix (using 20 mm graded stone aggregate) type B1 for chajjas complete all as specified and directed by Engineer-in-Charge.

Formwork to chullah hoods, chajjas, troughs and similar items including rough finished surfaces of flat concrete edges complete all as specified and directed by Engineer-in-Charge.

Material & labour for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge. .

Material & labour for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia, cut to length, bent to shape required, including cranking, stirrups spaces and bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed by Engineer-in-Charge. complete all as specified and directed by Engineer-in-Charge.

Dismantling cast iron work of any description complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 100mm bore cast iron sand cast soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 75mm bore cast iron sand cast soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 100mm bore cast iron sand cast soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 75mm bore cast iron sand cast soil, waste and vent pipes, in any length with or without ears, with cement joints,fixed to walls complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 100mm bore cast iron bends sand cast (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access door complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 75mm bore cast iron bends sand cast (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access door complete all as specified and directed by Engineer-in-Charge.

Extra over 100 mm cast iron pipes and fittings if lead joint is provided in lieu of cement joint complete all as specified and directed by Engineer-in-Charge.

Extra over 75 mm cast iron pipes and fittings if lead joint is provided in lieu of cement joint complete all as specified and directed by Engineer-in-Charge.

Material & labour for CI floor trap 75 mm with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed by Engineer-in-Charge.

Material & labour for CI floor trap 100 mm with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed by Engineer-in-Charge.

Cutting holes in brick walls for inserting hold fast etc built in C:M n exc half brick wall and making good in cement concrete 1:2:4 type B-1 complete all as specified and directed by Engr-in-charge.

Supply and fixing 110mm bore PVC (SWR) rain water pipe single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 110mm bore PVC (SWR) bends any radius complete all as specified and directed by Engineer-in-Charge.

Dismantling of brick work or block masonry built in cement mortar complete all as specified and directed by Engineer-in-Charge. Note- 50 % taken due to detoration.

Material & labour precast cement concrete type C1 1:3:6 (20mm graded stone) block masonry with solid blocks exc. 10 cm in width and setting in cement mortar1:6 complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair brass chromium plated tubular towel rail 20mm dia “D” type 60 cm long between flanges including brackets complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs grating doom 100mm dia PTMT(minimum weight 25gms) complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair vitreous china wash down water closet pan (pedstal pattern), white excluding fixing bolts, flushing cistern and flush pipe, including plastic water coset seat, black cosed pattern with flat bottom, and cover and mild steel chromimum plated hinging device complete all as specified and directed by Engineer-in-Charge. .

Supply and fixing in repair PVC valveless syphonic action type 10 ltr capacity flushing cistern low level with inlet ball valve, float and handle including brackets with 32mm dia flush pipe of polyethylene of low or high density including 450 mm pvc connection complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repair stainless steel curtain rod 25 mm dia (minimum weight 0.36 Kg per RM) with brackets, fancy knobs and stand etc complete all as specified and directed by Engr-in-charge.

Material & labour for 50 mm thick cement concrete type C–1 (1:3:6) using 20mm graded stone aggregate as in plinth protection finished even and smooth etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing IInd class hard wood small fittings such as brackets of any type latch and hinge blades shaped door and window stops and the like including all necessary labour article n.exc 200cu.cm each complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete exc 15cm thickness in sunken portion but above ground floors complete all as specified and directed by Engineer-in-Charge.

Material & labour for water proofing treatment to RCC sunken slab complete all as specified and directed by Engineer-in-Charge.:- (a) 15mm plaster in CM 1:3 with WPC on raised vertical surface. (b) Cleaning the surface with wire brush/coir brush, removing loose material like dust particles ,dirt etc. (c) Creating fillet covering of 50x50 mm with polymer modified mortar on the junction of slab and walls (d) Apply first coat of two component modified polymer coating on the horizontal and vertical surfaces. (e) Provision of glass fibre mesh of 2x2 mm immidiately on above coating (f) Apply second coat of two component modified polymer coating after 72 hours (g) Laying concrete 1:4:8 over the coating as per requirement (h) Joining the sanitary pipe with non shrink cementatiuos grout (j) Complete the treatment to be carried out by authorised applicator of waterproofing manufacturer NOTE : (i) The Treatment shall be carried out as per the manufacturers industreis and as directed by eng-in-charge. (ii) The plan area of floor shall be consider for payment. (iii) WPC shall be measured and paid saperately.

Supply only integral Water proofing compound complete all as specified and directed by Engr-in-charge

Material & labour for cement concrete type E2 1:5:10 (using 40mm graded stone aggregate) as in foundations filling and mass concrete etc complete all as specified and directed by Engr-in-charge

Material & labour for providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc complete all as specified & directed.

Supply and fixing of 100 mm socket cast Iron vent pipes complete all as specified and directed by Engr-in-charge

Supply and fixing of 75 mm socket cast iron vent pipes complete all as specified and directed by Engr-in-charge

Supply and fixing of 100 mm cast Iron vent pipe cowls complete all as specified and directed by Engr-in-charge

Supply and fixing in repairs CP soap dish complete all as specified and directed by Engr-in-charge

Supply and fixing in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Engr-in-charge

Supply and fixing in repairs brass chromium plated shower roses with or without swivel joints 125 mm size, including fixing to steel pipe or union.

Taking down and refixing shutters not exceeding 1.0 Sqm each in same opening after resecuring or easing and adjusting complete all as specified & directed by Engineer-in- charge.

Without taking down of shutters of any description n exc 1.0 sqm each , resecuring or easing & adjusting complete all as specified & directed by Engineer-in- charge.

Taking down carefully existing copper/aluminium point wiring (light/fan/sockets) complete with all accessories such as switches sockets ceiling rose, wall bracket etc and removing dismantled material and making good disturbed surface of walls/floors etc matching with existing surface etc complete all as specified and directed by Engineer-in-Charge.

Material & labour for point wiring for one light point / fan point /bell point controlled by one switch with 1.5 Sqmm PVC insulated, sheathed multi strand copper conductor cable FRLS in and including PVC conduit 20 mm dia, medium duty, ISI marked including cutting/chasing in wall and fixing of modular sunken box for one light point, fan point ,bell point controlled by one switch on the same board with other switch or independent including PVC insulated sheathed 1.5 Sqmm multi stranded copper conductor cable FRLS connected to common earth dolly for fixing of switch,sockets etc complete all as specified and directed by Engineer-in-charge.

All as per srl item No. 116.00 (here-in-before) but two way point wiring complete all as specified & directed by Engineer-in- charge.

All as per srl item No.116.00 (here-in-before) but for one 3 pin socket outlet 5 Amp on same board complete all as specified & directed by Engineer-in- charge..

All as per srl item No. 116.00 (here-in-before) but for one 3 pin socket outlet 5 Amp on independent board complete all as specified & directed by Engineer-in- charge..

All as per srl item No. 116.00 (here-in-before) but for 15 Amp socket out let by using 2.5 Sqmm PVC insulated sheathed copper conductor cable FRLS multi strand on independent board including provn of 2.5 Sqmm unsheathed, multi stranded copper conductor cable FRLS continues as earth wire connected to earth dolly etc complete all as specified and directed by Engineer-in-Charge.

Supply & fix modular type switch piano type, 6 Amp 240 Volt, AC (ISI Marked) one way etc complete all as specified and directed by Engineer-in-Charge.

Supply & fix modular type switch piano type, 6 Amp 240 Volt, AC (ISI Marked) two way etc complete all as specified and directed by Engineer-in-Charge.

Supply & fix modular type bell push switch piano type, 6 Amp 240 Volt, AC (ISI Marked) one way etc complete all as specified and directed by Engineer-in-Charge.

Supply & fix modular one socket outlet 3 Pin 5 Amp 230 volts AC complete all as specified & directed by Engineer-in- charge.

Supply & fix modular type switch piano type, 16 Amp 240 Volt, AC (ISI Marked) one way etc complete all as specified and directed by Engineer-in-Charge.

Supply & fix modular one socket outlet multipurpose 3 Pin 5 Amp and 6 Pin 15 Amp 230 volts AC complete all as specified and directed by Engineer-in-Charge.

Supply & fix lamp holder of PVC / polycarbonate, surface type for LED bulb complete all as specified & directed by Engineer-in- charge.

Supply & fix modular ceiling fan regulator electronic step type of suitable wattage, 230V suitable for 1200/1400 mm ceiling fan etc complete all as specified and directed by Engineer-in-Charge.

Supply & fix call bell ding dong type, AC, 230 V etc complete all as specified & directed by Engineer-in- charge.

Supply & fix ceiling rose surface bakelite 65mm x 50mm, 2 to 3 terminals with back plate etc complete all as specified & directed by Engineer-in- charge.

Supply and fixing in renewal modular white cover plate with frame, 1 module complete all as specified & directed by Engineer-in- charge.

Supply and fixing in renewal modular white cover plate with frame, 2 module complete all as specified & directed by Engineer-in- charge.

Supply and fixing modular white cover plate with frame, 3 module complete all as specified & directed by Engineer-in- charge.

Supply and fixing in renewal modular white cover plate with frame, 4 module complete all as specified & directed by Engineer-in- charge.

Supply and fixing in renewal modular white cover plate with frame, 6 module complete all as specified & directed by Engineer-in- charge.

Supply and fixing in renewal modular white cover plate with frame, 8 module complete all as specified & directed by Engineer-in- charge.

Supply and fixing of 20 watt LED tubelight fitting retro fit type 4Xfeet long with replacable rod complete with all accessories and including connecting up with three core twisted flexible copper conductor cable with suitable size of 230V, 50 Hz, complete all as specified & directed by Engineer-in- charge.

Supply & fix mini LED light fitting 9/10Watt ,6000K indoor domestic mirror light luminarire with poly carbonate cover incl taking down unsv fitting complete, complete with all acessories and driver including connections with with twin core wire of suitable size complete all as specified & directed by Engineer-in- charge.

Supply & fix in repair LED light fitting 10 W,230V decorative wall mounting type with multicolour ABS housing with poly carbonate rings and glass shade with lamp holders & bulb with connector block,etc complete with all accessaries pre wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified & directed by Engineer-in- charge.

Supply & fix LED light fitting, 1X25 watt,5700 K complete with tuff net glass protection IP:66, fixed to walls incl taking down unsv fitting complete, with GI bracket made out of suitable size of light grade pipe 32 mm dia tubing upto 1.2 mtr length bent to shape with 02 sets of MS clamps made out of 25x3 mm MS flat iron with suitable bolt and nuts and testing etc complete all as specified & directed by Engineer-in- charge.

Supply & fix including taking down of Sub main wiring with 2 X 4 sqmm single core cable PVC insulated unsheathed of copper multi strandard conductor cable , 1100 votls grade drawn in PVC conduit medium grade and insulated 1X 4 sqmm unsheathed multistranded FRLS copper conductor cable for earth continuity and connected to common earth dolly complete all as specified and directed by Engineer-in-charge. (Note:- 2 lengths of 4 Sqmm & 1 length of 4 sqmm cable and PVC conduit will be measured as one length).

Supply & fix including taking down of Sub main wiring with 2 X 6 sqmm single core cable PVC insulated unsheathed of copper multi strandard conductor cable , 1100 votls grade drawn in PVC conduit medium grade 1X 6 sqmm unsheathed multistranded FRLS copper conductor cable for earth continuity and connected to common earth dolly complete all as specified and directed by Engineer-in-charge. (Note:- 2 lengths of 6 Sqmm & 1 length of 6 sqmm cable and PVC conduit will be measured as one length).

Supply and fixing double door sheet metal enclosure made out of CRCA mild steel sheet concealed surface mounting TPN, 4 way, 440 Volt, with 200 Amp rated bus bar suitable for fixing MCBs, isolators etc including taking down old complete all as specified & directed by Engineer-in- charge.

Supply and fixing double door sheet metal enclosure made out of CRCA mild steel sheet concealed surface mounting SPN, 8 way, 230 Volt, with 200 Amp rated bus bar suitable for fixing MCBs, isolators etc including taking down old complete all as specified & directed by Engineer-in- charge.

Supply and fixing in replacement of Single pole and neutral sheet metal enclosure with a two pin and earth plug and socket, one single pole 20 Amps, 240V MCB complaints complete all as specified & directed by Engineer-in- charge.

Supply & fix MCB TPN 100 Amps C curves MCB repturing capacity 10 KA etc complete all as specified & directed by Engineer-in- charge.

Supply & fix MCB SPN 63 amp C curves MCB repturing capacity 10 KA etc complete all as specified & directed by Engineer-in- charge.

Supply & fix MCB SPN 40 amp C curves MCB repturing capacity 10 KA etc complete all as specified & directed by Engineer-in- charge.

Supply & fix MCB 6 Amp to 32 Amp SP capacities 'C' series 10KA rupturing capacaity complete all as specified & directed by Engineer-in- charge.

Supply & fix blanking plate for empty space in DB box complete all as specified & directed by Engineer-in- charge.

Supply and fixing Single phase ceiling fan 1200 mm BLDC copper wound permanent magnet brushless DC Motor 230 v 50 Hz single phase 26-35 watt rated pf 0.98 360 rpm air delivery 220m3, 5 star with rated service value min 6m2/min/watt with 5 Year Warranty, no of blades three type of blade leaf remote control radio frequency 5 speed + off timer option speed regulation class of insulation two nos bearings including connecting wire and old unserviciable fan deposited to MES yard complete all as required and directed at site by Engr- in- charge.

Supply & fix exhaust fan heavy duty size sweep 300 mm sweep, 230 v, 50 Hz , complete with metalic louvers including making holes and making good the disturbed surface and 3 core copper wire of size 0.50 sqmm for connection and old unserviciable fan deposited to MES yard complete all as specified and directed by Engineer in-charge.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth or n exc 10 Sqm on plan and n exc 1.5 m in depth & getting out, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes or for laying underground cable, pipe lines etc. in soft/ loose soil, complete all as specified & directed by Engineer-in- charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cms thick in soft / loose or hard dence soil complete all as specified & directed by Engineer-in- charge.

Removing excavated surplus material to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified & directed by Engineer-in- charge.

Supply & spread unwashed dry river sand for sand cushioning and covering the under ground cable in trenches complete all as specified & directed by Engineer-in- charge. (Note :- Punning thickness shall be measured.)

Material & labour for brick protection with sub Class`B` bricks old size laid dry, flat over cable perpendicular across the cable in trenches complete all as specified & directed by Engineer-in- charge.

Supply laying & testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminum conductor,1100 volts grade, of size 35 sqmm x 3.5 core complete all as specified & directed by Engineer-in- charge.

Supply laying & testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminum conductor,1100 volts grade, of size 95 sqmm x 3.5 core complete all as specified & directed by Engineer-in- charge.

Boring of holes under road, pavement, hard standing by using suitable tools and machinery for laying of pipe upto 80 mm bore complete all as specified & directed by Engineer-in- charge. Note :- GI pipe shall be measured and paid in concern Item

Supply & fix or laying galvanised steel tubing medium grade (ISI marked) for protection of under ground cable on poles/walls under road crossing of size 80 mm complete all as specified & directed by Engineer-in- charge.

Material & labour for earthing with galvanized steel plate electrode 600 x 600 mm x 6 mm size directly burred in ground vertically earth pit not less than 2.25 meter deep below normal ground level with top edge of the earth plate not less than 1.5 m below normal ground level surrounded with coal dust and common salt filling in alternative layers of 15 cm thick each connected to and including GI earth wire 4 mm dia by means of GI nuts, bolts, check nuts & washers etc connecting to earthing test point, main switch board and including 15 mm dia GI pipe light grade for protection of earth lead from earth plate upto 5 mtr and 20 mm dia GI pipe medium grade connected with funnel having wire mess for watering purpose including necessary excavation and earth work, PCC (1:2:4) type B-1 (using stone aggregates) for earthing pit, 10mm thick cast iron cover with angle iron frame all as specified and shown in electrical plate No 3 of SSR Part-I and testing on completion complete all as specified & directed by Engineer-in- charge..

Material & labour for earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6.0 mm buried directly in ground ( earth pit not less than 2.25 m deep below normal ground level), with top edge of the plate vertically to depth of not less than 1.5 m below normal ground level connected to and incl GI strip 25x4 mm and GI pipe 20 mm dia light grade for protection to the extent of 7.5 m as earthing lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Pt-I incl PCC cover and , watering arrangement with GI pipe 20 mm dia and MS funnel, concrete pit incl excavation and earth work in any type of soil and testing on completion etc complete( Note : PCC chamber shall be constructed at least 1.5m away from earth pit pipe for watering shall be provided in slanting manner.) complete all as specified & directed by Engineer-in- charge.

Supply & fix in replacement of GI Tubes of size 50 mm bore ,ISI marked medium grade, galvanised, with all fitting and fixed complete to wall and ceiling or laid in floors complete all as specified & directed by Engineer-in- charge.

Supply & fix in replacement of GI Tubes of size 25 mm bore ,ISI marked medium grade, galvanised, with all fitting and fixed complete to wall and ceiling or laid in floors complete all as specified & directed by Engineer-in- charge.

Please Enable Macros to View BoQ information