Reconductoring and drawing addl covered conductor through A pole from Ezhavapalamto Sasi foundary under ES Kilikolloor

LABOUR

Dismantling (without damage) one km 11kV line (3 conductors), cross arm, insulators, disc, rolling the conductor and stacking.

Dismantling of 11 kV Aerial bunched cable XLPE insulated of size 3 x 120+ 1 x 95 sqmm with bare insulated Messenger

Dismantling (without damage) one AB switch from existing structure and bringing back to section store.

Dismantling one Channel cross arm from existing DP structure, and bringing back to section store.

Dismantling one V cross arm/Channel cross arm from existing Pole, and bringing back to section store.

Dismantling (without damage) one LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Dismantling one LT 2 line cross arm from existing pole.

Dismantling one LT 4 line cross arm from existing pole.

Dismantling one ordinary street light/CFL/LED fitting from existing pole and refitting the same on newly erected pole and reconnecting.

Additional rate for refitting/redoing one Shackle set and reshackling one span while renewing any type of pole.

Fitting and erecting one HT A type Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads.

Fitting and providing one HT Fly stay for 11kV pole using HT PSC pole incl. digging & back filling pits.

Fitting and providing one HT Stay for 11kV pole incl. digging & back filling pit.

Additional rate for refitting/redoing one Disc set while renewing any type of 11kV cut pole

Stringing of 11 kV Aerial bunched cable of size 3 x 120 + 1 x 95 sqmm with bare/insulated Messenger through existing poles

Erection of Anchor clamp / dead end clamp for 11kV ABC of any size

Fitting one Additional 75x40mm, 1.8m Channel cross arm in existing single pole incl. conveyance of materials.

Fitting one Additional V cross arm in existing single pole incl. conveyance of materials.

Fitting one set AB switch and giving connection

Fitting one set (3No.) 11kV LA and giving connections excluding earthing.

Fitting one Additional 2.4m/3m Channel cross arm (100x50x6mm), in existing 11kV DP incl. conveyance of materials.

Fitting one LT 2 line cross arm on HT or LT existing poles incl. fitting insulators and binding the same with LT Line.

Fitting one LT 4 line cross arm on HT or LT existing poles incl. fitting insulators and binding the same with LT Line.

Dismantling and reconnecting Sph service connection from the OH line incl. lowering down the WP portion.

Dismantling and reconnecting 3ph service connection from the OH line incl. lowering down the WP portion.

Transferring LT 3ph 4/5 wire OH line to newly erected HT/LT pole and refitting all items to the new pole.

Loading HT A type pole from the stacking place and unloading the same at work site (transport by vehicle).

Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 poles excluding loading & unloading.

Transportation - HT line materials (excluding poles)

Providing concrete muffing (0.45x0.45x1.5m) inclusive of cost of allmaterial (as per specification).

Renewal of existing damaged/broken old 11kV Stay to the existing stay rod.

Drilling hole of various sizes on existing Channel/Cross Arm.

Providing one Driven Earth using GI earth pipe at standard distance away from the pole/structure in loose soil.

Additional rate for excavation of one Pit for HT Pole/HT Stay in Laterite.

Additional rate for excavation of one Pit for HT Pole/HT Stay in Hard Laterite.

Providing 11kV Jumper connection for one phase from OH line to Transformer through AB, DO and LA using Copper/ACSR conductor.

Stringing of one km 3 PH 11kV line with XLPE Insulated ACSR Raccoon

Additional rate for providing one disc set on any type of HT pole for making cut point.

Renewal of existing damaged/old 11kV PSC/RCC Pole with new A type pole in place and refitting of all items incl. conveyance (except pole).

BoQ_Ver3.0

E Tender No: ET No. 13/25-26/ Dtd 26.09.2025

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Total of BoQ1