CERTAIN MISC BR WORK SERVICES IN TECH AREA UNDER AGE BR I AT AF STN JODHPUR

Amount

Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below/above ground level) including floor finishes complete all as specified & directed.

Dismatling floor hearth or wall tiling including cement mortor bedding but not backing removing serviceable tiles to store and rubbish off the premise complete all as specified & directed.

Material & labour for 25mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in levelling course finished even and fair for laying floor finishes etc complete all as specified & directed.

Material & labour for vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

Material & labour for vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm, as in skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering in cement mortar (1:4) complete all as specified and as directed.

M&L for 100 mm thick PCC 1:4:8 type D-2 using 40mm stone aggregate as in sub base floor/floors and paving etc. complete all as specified & directed.

M&L 25mm thick PCC 1:2:4 type B-1 ( 20 mm graded stone aggre) as in sub base for tiles in floors complete all as specified & directed.

M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm stone aggregate as in sub base floor/floors and paving etc. complete all as specified & directed.

S&F rubber moulded machine pressed PCC interlocking paver block of approved shape and colour confirming to IS 15658-2006 of size 80 mm thickness M-40 Grade with grey cement and pigment laid dry over and including 25mm thick sand cushion as in floor complete all as specified & directed.

M&L for 10 to 12 mm thick vitrified unglazed and unpolished, scratch resistant, matt finished coloured tiles (square/rectangular) of size not less than 300mm x 300mm as in parking/hardstanding etc including 15 mm thick screed bed in CM 1:4, set, jointed in cement slurry and pointed in white or coloured cement to match the colour/shades of tiles complete all as specified and directed.

S&F rubber moulded chequered cement concrete tiles 25 mm thick of any size, colour and pattern as approved by GE set, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed in CM 1:6 with grey cement and pigments complete all as specified & directed.

M&L for pre-cast cement concrete Type B1 1:2:4 (20 mm graded aggregate) kerb solid blocks, exc. 10 cm in width and setting in cement mortar 1:4 complete all as specified & directed.

M&L for preparation of new concrete surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint all as specified and as directed by Engineer-in-Charge.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified.

S&F anodised aluminium snap grid frame work (600mm X 600 mm) for false ceiling complete all as specified & directed.

S&F 8 mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 x 600mm grid for exposed metal frame ceiling complete all as specified & directed. (Note : Frame work for ceiling shall be measured and paid separately.)

M&L for preparation of new decorated plastered or unplastered surfaces of ceilling and applying two coat of oil bound distemper white or tinted over and including a coat of white putty in patches as required all as specified and as directed by Engineer-in-Charge.

Dismantling boarding of any description, fixed any position with nails complete all as specified & directed.

M&L for solid PVC Wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified & directed.

M&L for 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified & directed.

Material & labour for granite of 18mm to 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble over and including 20mm thick screed bed in cement mortar 1:4 complete all as specified & directed.

M&L for rounding/chamfering to edge of stone slab like granite, marble, kota stone etc to required shape & design including grinding & polishing to obtain required finish complete all as specified and directed.

Dismantling of old unserviceable, rusted, broken (corrugated/semi corrugated, etc.) CGI/AC/ Fibre glass sheets in ridge and roof coverings complete all as specified & directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed by Engineer-in-Charge.

S&F rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410-W (Gde-E-250) Quality-A complete all as specified & directed.

Supply & fix pre-painted galvalume GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge.

Material & labour for preparation of new or previously untreated steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified & directed.

AAI NATH ENTERPRISES

M/S KAUTILYA GARG

VIKAS CONSTRUCTION CO.

CHOUDHARY CONSTRUCTION CO

MAA CHAMUNDA CONSTRUCTION & SUPPLIER