SPECIAL REPAIR TO COMPOUND WALL OF RESIDENTIAL AREA AYUDH VIHAR AT NAD ALWAYE.

Amount

Dismantling of brick work/solid block work built in cement mortar including all quoins, pillars etc, complete all as specified and as directed

Demolition of unreinforced cement concrete in any description and in any position not otherwise spcially provided for complete all as specified and directed

Demolition of reinforced cement concrete in any description and in any position not otherwise spcially provided for complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engineer in Charge

Material & Labour for Broken glass coping on top of walls with cement Mortar 1:3 including taking and removing rubbing etc complete all as specified and as directed by Engineer in Charge

Material & Labour for Cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and as directed by Engineer in Charge.

Material & Labour for Reinforced cement Concrete Type B-1 1:2:4 (using 20mm graded aggregate) as in Columns, pillars, piers ,posts and struts and the like complete all as specified and as directed by Engineer in Charge

Material & Labour for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Material & Labour for Mild steel TMT bars 5mm dia and over, cut to length, bent to shape required, upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed.

Supply & Fix Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc, conforming to Fe-290 Grade-E-165 complete all as specified and as directed.

Supply & Fix 1.6mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending Laser cutting , designing etc or turning up, mitred angles, etc. as required complete all as specified and as directed.

Material & Labour for Pre-cast cement concrete block masonry with solid block type C1, (1:3:6) (20 mm graded aggregate) setting in CM 1:6 complete all as specified and directed.

Material & Labour for block masonry using existing any type of block at site setting in CM 1:6 complete all as specified and directed.

Taking down cement plaster or brick or stone wall including raking out joints, hacking for key scrubbing down with water complete all as specified and directed.

Material & Labour for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 on walls even and smooth without using extra cement complete all as specified and directed.

Material and Labour for preparation of new plastered surfaces of wall and applying priming coat of exterior primer applied @ 2.20 kg/10 sqm and finishing walls with two coat of Acrylic Smooth Antifungal exterior paint of required shade @ 1.67 litre/10 sqm complete as per manufacturer's specification complete all as specified and as directed.

Material and Labour for old painted surfaces with complete removal existing paint and preparation of plastered surfaces of wall and applying priming coat of exterior primer applied @ 2.20 kg/10 sqm and finishing walls with two coat of Acrylic Smooth Antifungal exterior paint of required shade @ 1.67 litre/10 sqm complete as per manufacturer's specification complete all as specified and as directed.

Material and Labour for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces exceeding 10 cm width or girth after preparation of surfaces complete all as specified and as directed

Supply & Fix 3 mm thick ACP (Aluminium composite panel) fixing with and including necessary complete frame work (MS or aluminium) as a boarding , paneling , name boards , decorative boards etc fixed with sides of walls and top portions etc complete all as specified and as directed by Engineer in Charge.

Supply & Fixing stainless steel lettering embedded /fixed with ACP panel board of each letter size exceeding 25cm height but not exceeding 40cm complete all as directed by Engineer in Charge.

Amount of credit schedule will be dected to arraive the contract Sum.

M/s S & S Enterprises/ Suresh Shivasankarapillai

Yesgee Projects Private Limited

ELLIKKAL ENTERPRISES

AVM CONSTRUCTION

AS ENTERPRISES

HIRA FACILITY

M/S V B MOHAMMED ALI

J K CONSTRUCTIONS