Installation of Street Illumination work through 12.5 M High Mast system( 6 nos) at different places under Greencity Mission under Kandi Municipality.

12.5 M High Mast system at different places

Supply of 12.0/12.50 meter High mast lighting system with its accessories. Mast shaft shall be in two sections with steel material confirming to BSEN 10025 and material shall be high tensile steel, grade S355, hot dip galvanised confirming to BSEN ISO 1461 and suitable for wind velocity as per IS 875. It shall also include accessories for high mast including head frame, 2 continues steel wire rope 6 mm dia (7/19 construction), trailing cable, double drum winch,Galvanised Lantern carriage arrangement suitable for up to 9 luminaires symmetrically & its control gear (Make of Gear Box : New Allen Berry works / Chandra Gear / Elecon Engineering / Shanti Engineering) boxes and lightning finial. The mast shall have an integral powertool installed inside the base compartment for its operation along with Supply & Fixing of Cu Cable of Power Tool motor, Wiring for Luminaries, Anchor Plate, Foundation Bolt, Nut,Washer, Common Template all complete. Luminaire wiring materials not included in this item. (Make: Bajaj / Transrail / Valmond/ Utkarsh /Skipper) UD & MA Schedule, Page-53, It - 01

Supply of Control Panel Housing of 32 A TPN incomer, double dial timer contractor circuit for the automatic switching control of luminaries, outgoing terminals and control circuit for the power tool motor 1 No 9 A Contractors and raise lower push button all complete with 918 X 561X382 Mini Size Feeder Pillar Box. As per Market Rate Analysis

Supply of LED floodlight Luminaire type 200W 5700K As per approved technical specification of UDMA

Erection of 12.5 Mtr. high Mast on RCC foundation with M 20 Grade concrete considering actual SBC of soil, with the help of suitable modern engg. tools and Plants, wiring of luminaries with all wiring materials like PVC insulated flexible cable of suitable copper conductor core of 1.5 mm² lugs, 10 nos. 6A MCB along with construction of shallow foundation with M20 concrete for High Mast considering the safe soil bearing capacity as per site condition as per manufacturers design (Drawing enclosed). UD & MA Schedule, Page-54, It - 04

Earthing with 50mm. Dia GI pipe 3.64 mm. thick x 3.04 Mts. Long with 1 x 4 SWG GI (Hot Dip) wire (4 Mts. Long), 13mm. Dia x 80 mm. long GI bolts, double nuts, double washers incl. S&F 15mm. Dia GI pipe protection (1 Mts. Long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By TATA - Medium GI Pipe. Electrical Schedule, Page G-1, It-2 (a)

Excavation of soil for installation of Earth Electrode and filling & ramming. (a) For Soft Soil Electrical Schedule, Page G-1, It-1 (a)

Extra for treatment of soil by using salt & charcoal or coke for plate electrode Electrical Schedule, Page G-2, It-3 (b)

Supplying & delivery of 1.1 KV grade 4 core 16sqmm. PVC AI. Armoured cable Make: POLYCAB/KEI/HAVELLS/GLOSTER

Supply of High Density Poly-ethylene Pipe conforming to IS - 4984 - 1985 (Dia) [PE - 63] A. 6 Kg / Sq.Cm. (Working Pressure) , 40 mm Dia PWD Plumbing Schedule, Page 19, It-20 (A)

Labour for fitting and fixing high density poly-ethylene pipes or P.V.C. pipes for above ground work including cost of jointing materials paints etc. fitting and fixing all necessary specials, cutting pipes, making threads, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps(any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineer-in-charge. (Payment will be made on centre line measurement of the total pipeline including specials. ) (B)Under Ground, (v) 40 mm dia. PWD Plumbing Schedule, Page 12, It-18 (B)(v)

Laying only Cable upto 50 sqmm through existing RCC/Hume/ GI Pipe/open masonary trench for single, 2, 3, 3½ & 4 core Electrical Schedule, Page F-1, It-3 (a)

Supplying & fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture - Proof entry of XLPE/PVC armoured cables as below: a) 4 core 16 sqmm. PVC /A Cable Electrical Schedule, Page F-4, It-7 ©

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplyign and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials. a) 4 core 10 sqmm. PVC /A Cable Electrical Schedule, Page F-5, It-b (xi)