Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹2.4 Cr
EMD Value
₹2.4 L
Closing Date
25 Nov 2026, 6:00 pm2d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Engineer, Panchayat Road and Building Division, Morbi
Resurfacing of Juna Amrapar Raisangpar Joining Ghanshyamgadh Road (NP-BT) Km.6/000 to 9/850 Ta. Halvad Dist. Morbi (Under MMGSY Yojna (SCSP) Year 2025-26)
363143
89/2026
Open
Civil - All
Works
Morbi
9 documents required · 9 mandatory
₹3,600
Executive Engineer, Panchayat Road and Building Division, MORBI
₹2.4 L
4 Nov 2026
4 Nov 2026
4 Nov 2026
25 Nov 2026
4 Nov 2026
120 days
BILL OF QUANTITY
Memorandum showing items of works to be carried out
Item Discription of Item (With Brief Specification and reference Rate In
Quantity Unit Amount
No.. to book of Specification) Figures
1 Clearing and grubbing road land including uprooting rank 0.71 Hect 28455.08
vegetation grass bushes,shrubs,sapling and trees girth up to
300 mm removal of stumps of trees cut earlier and disposal of
unserviceable materials (C) By mechanical means in area of
2 Earthwork for Embankment including breaking clods,dressing 1463.00 Cum 163.38
etc.complete with all lead and lift. (Excluding watering &
consolidation)(C) From Borrow Area within All Lead.a and
Should Have CBR not Less Than 6%
3 Box cutting the road surface to proper slope and camber for 2579.00 Cum 109.24
making a base for road work including removing the excavated
stuff and depositing on the road side slope as directed upto all
4 Earthwork in cuting in all sorts of soil and soft murrum including 1313.60 Cum 134.47
conveying and spreading the stuff, embankment as and where
directed up to 200m laed from the end of the cutting with all
required lead and lift.
5 Rolling of earth work in layers with Power roller including filling 1364.00 Cum 22.95
in depressions which occur during the process and Watering of
Earth Work As directed.
6 WBM Grading 1 (by Manual Means) 820.00 Cum 1593.54
Providing, laying, spreading and compacting stone aggregates
of 90 to 45 mm sizes to Water Bound Macadam (W.B.M. Gr-I)
specification including spreading in uniform thickness, hand
packing, rolling with smooth wheel roller 80-100 kN in stages to
proper grade and camber, applying and brooming, stone
screening/binding materials to fill-up the interstices of coarse
aggregate, watering and compacting to the required density
grading I as per Technical Specification.
7 Water Bound Macadam Grading-II (By Manual Means) 587.00 Cum 1468.43
Providing, laying, spreading and compacting stone aggregates
of 63 to 45mm sizes to water bound macadam specification
including spreading in uniform thickness, hand packing, rolling
with smooth wheel roller 80-100 kN in stages to proper grade
and camber, applying and brooming, stone screening/binding
materials to fill up the interstices of coarse aggregate, watering
and compacting to the required density. (As per Technical
Specification Clause 404)
8 Construction of dry lean cement concrete Sub- base over a 607.10 Cum 2779.72
prepared sub-grade with coarse and fine aggregate conforming
to IS: 383, the size of coarse aggregate not exceeding 25 mm,
aggregate cement ratio not to exceed 15:1, aggregate
gradation after blending to be as per table 600-1, cement
content not to be less than 220 kg/ cum, optimum moisture
content to be determined during trial length construction,
concrete strength not to be less than 10 Mpa at 7 days, mixed
in a batching plant, transported to site, laid with paver,
compacting with 8-10 tonnes vibratory roller, finishing and
curing etc. complete.
9 Cement Concrete Pavement M-25 (Construction of un- 1215.00 Cum 6998.79
reinforced, dowel jointed, plain cement concrete pavement over
a prepared sub |base with 53 grade cement @ 380 kg per cum,
coarse and fine aggregate conforming to 1S 383, maximum
size of coarse aggregate not exceeding 25 mm, mixed in a
batching and mixing plant as per approved mix design,
transported to site, laid with a fixed form or slip form paver,
spread, compacted and finished in a continuous operation
including provision of contraction, expansion, construction and
|longitudinal joints, joint filler, separation membrane, sealant
primer, sealant, debonding strip, dowel bar, tie rod, admixtures
as approved, curing compound, finishing to lines and grades as
10 Providing & Laying Bitumeneous Grout 37.50 mm thick using 588.00 Mt 3090.70
Emulsion RS-1 (Bulk) for tack coat at the rate of 4.00 Kg/
sqm on B.T. surface and using B.T.chips for required
gradation with the asphalt of grade VG-30 at the rate of 1.99 %
i.e. 19.90 Kg./Mt by weight of mix including heating and mixing
in drum mix plant, transporting the mix and spreading the same
by paver finisher and consolidation as per MOST specification
including cost of all Materials, fuel, labours, tools and plants
etc. using contractor's own drum mix plant etc. complete.
11 Providing, laying and rolling of 25mm thick using Asphalt 412.00 MT 4120.49
Viscosity grade of VG-30 open graded premix bituminous
carpet with B.T. aggregate as specified and using Emulsion
RS1 (Bulk) For Tack Coat at the rate of 2.50 Kg/10 Sqm on
B.T.Surface .( As per IRC-16) and using bitumen for mixing
with aggregate at the rate of 3.36% i.e. 33.60 Kg/M.T. of total
mix including heating and mixing in drum mix pant, spreading
the same with paver finisher and consolidation with vibratory
roller includng necessary firewood, oil lubricants, labour
charges etc. using equipment, tool etc completed in
accordance with the requirement of specification..
12 Providing and laying seal coat using Bitumean grade of VG-30 215.00 Mt 4585.70
with B.T. aggregate as specified using aggregate at the rate of
0.18 cum / 10 sqm. and bitumen for mixing with aggregate at
the rate of 4.5% i.e. 45.00 kg/ M.T. of total mix Incl. heating and
mixing in drum mix plant and spreading the same by paver
finisher and consolidation with vibratory roller including
necessary using contractor's own drum mix plant, machineries
and equipment, tools etc. complete in accordance with the
requirement of specification.
13 Excavation for foundation upto 1.5 m. depth including sorting 428.00 Cum 253.88
out and stacking of useful materials and disposing of the
excavated stuff upto All lead. Dense or hard soil
14 Excavation for foundation upto 1.5 m depth including sorting 269.00 Cum 432.61
out and stacking of useful materials and disposing off the
excavated stuff upto All lead.(C) Hard Murrum
15 Providing & casting in situ ordinary cement concrete M-150 mix 666.00 Cum 3921.63
and providing necessary pin headers including shuttering,
scaffolding, laying, vibrating, curing and finishing complete
without V-Groves. (A) Height from 0.0 M. to 5.0 M.
16 Providing and Fixing in position FE 550D TMT bar reinforement 3.460 MT 73243.01
including cutting, bending,hooking and tying complete as per
detailed drawings. (A) R.C.C. Kerb. (B) R.C.C. Footpath.(C)
R.C.C. Approch slab.(D) Wearing Coat.
17 Providing and laying in position FE 550D TMT bar 4.480 MT 73858.69
reinforcement including cutting, bending, hooking and tying
complete as per detailed drawings for the following.(A) Piers
(B) Abutments (C) R.C.C. Returns
18 Supplying and fixing reinforced concrete heavy duty non- 142.50 Rmt 3620.57
pressure pipes with collars for culverts carrying heavy traffic as
per IS 458-1991 specifications including setting the pipes in
C.M. 1:2 watering and laying (to level or slopes) of class NP3 of
following internal daimeters.(v) 900mm dia. With All Lead.
19 Supplying and fixing reinforced concrete heavy duty non- 22.50 Rmt 5560.00
pressure pipes with collars for culverts carrying heavy traffic as
per IS 458-1991 specifications including setting the pipes in
C.M. 1:2 watering and laying (to level or slopes) of class NP3 of
following internal daimeters.(I)1200mm. Dia With All Lead.
20 Providing and fixing Flood Gauge Post mark of "C" Channle 6.00 No 1140.29
angle size 100mm X 50mm X 6 mm Thick (In head Wall 0.50 m
and 1.50 m Out side wih Painting and letterning with radium
color as direct)
21 Providing and laying weep hole in Abutments and returns by 44.00 No 86.69
using A.C.pipe of 100mm.dia.incl.laying in proper grade and
jointing the completed as per detailed specification.
22 Providing and filling in foundation with ordinary cement 150.00 Cum 3345.58
concrete M – 100 mix and providing necessary vertical pin
headers including form work, vibrating, ramming and curing
23 Providing and casting in situ Controlled cement concrete M-200 151.00 Cum 5271.78
for Average 75/150mm thickness wearing coat laid as
directed dincluding tamping, vibrating, finishing, curing and
fillingin joints with bitumen complete
24 Dismentalling the existing structure including removing and 258.70 Cum 930.35
stacking the dismentalled materials as and where directed (A)
25 Providing and fixing Hectometer as per I.R.C. type design 15.00 No 356.49
including paiting, lettering etc. complete (ii) Fixing in Cement
Concrete 1:5:10
26 Providing and fixing guard stone as per I.R.C. type design 300.00 No 350.80
including white wasins etc. complete (ii) Fixing in Cement
Concrete 1:5:10
27 Providing and fixing ordinary Kilometer stone of precast C.C. 4.00 No 704.33
1:2:4 including necessary reinforcement as per I.R.C. type
design in C.C. 1:4:8 including painting,lettering etc.
complete.(For ODR Road,VR)
28 Providing and fixing indicator stone of approved stone as per 174.00 No 102.84
I.R.C. type design in C.C. 1:4:8 including white washing etc.
complete.(ii) Fixing in Earth
29 Cautionary warning sign;-Providing & Fixing sign boards made 6.00 No 3808.65
out of 2mm. alluminium sheet size 90x90x90cms. equilateral
triangle as per design of IRC-67-1977 Pretrated with
phospheting process & acid atching : coated with one coat of
apoxy primer and two coats of best quality epoxy paint,
reflectrorised with retro reflective sheeting as per latest
MOSTspecifications. 3.1mt. lomg stand post & frame fabricated
from suitable size iron angle of 35x35x3 mm., 75x75x6mm.
required paited with best quality epoxy coatings in black and
white bends, the detail of symbols for each board shall be as
per the instruction of the engineer in charge. The fixing at site
shall be in C.C. 1:2:4 block of size 45x45x60 cms for each leg,
incl. excavation,curing etc. comp.under the supervision of
Engineer - in charge.
(A) Engineer grade.
30 Citizen' s information Board- Providing and fixing of typical 1.00 No 7393.20
MMGSY information board as per instruction. Two M.S. sheets
of 3 mm thick, of 900 mm x 750mm size fixed at top & bottom
duly rivetted with MS angles of 25 x 25 x 5 mm thick M.S
angle shall be welded by two vertical M.S angle of 5 mm thick
to 75 mm x 75 mm of 12 SWG square tubes posts duly
embedded in cement concrete M-15 grade blocks of 600mm x
600mm x 750mm, below ground level. The letters & figure of
any shade reflectorised with High Intensity Prismatic Grade
Retro Reflective Sheeting of Type-4 as per ASTM D-4956 and
latest MORD specifications; All sections of framed posts and
steel tube will be painted with primer and two coats of epoxy
paints as per drawing Clause 1701 and Annexure
(10.16). (A) Class-B High intensity Grade Retro Reflective
31 Sign Board per square Meter :-Providing and fixing sing boards 10.00 No 7615.37
made out of 2mm aluminium sheet; size 1 Meter x 1 Meter as
as per the design given by engineer in charge pre treated with
phospheting process & acid etching; coated with one coat of
epoxy primer and two coats of best quality epoxy paint;
reflectorised with retro refiective sheeting as per latest
M.O.S.T. Specifications; Letters and numerals should be as per
IRC-30-1968, 3.1m long (2 nos) stand post and frame may be
fabricated either from suitable size iron angle of 35 x 35x 3mm
& 50 x 50 x 5mm & 75 x 75 x 6mm as required painted with
best quality epoxy coatings in black and white bends. the
details of symbol or inscription / numerals for each board shall
be as per the instruction of engineer in charge. The fixing at
site shall be in 1:2:4 CC block of size 45 x 45 x 60cms. for each
leg. including excavation curing etc. complete under the
supervision of engineer in charge.(A) Engineer Grade(VR)...
32 Village Name / Bump Ahead Sign : 10.00 No 5045.36
Providing and Fixing sign boards made out of 2mm aluminum
sheet : size 90*60 cms. rectangle as per design of IRC-67-
1977. Pretreated with phospheting process and acid etching :
coated with one coat of epoxy primer and two coats of best
quality epoxy paint: reflectorised with retro reflective sheeting
as per latest M.O.S.T specification: 3.1 M. long (2 nos) stand
post and frame fabricated from suitable size iron angle of
50*50*5mm painted with best quality epoxy coatings in black
and white bends the details of symbole or inscription / numerals
for each board shall be as per the instruction of engineer in
charge the fixing at site shall be in 1:2:4 CC block of size
45*45*60 cms for each leg: including excvation curing etc.
comp.under the supervision of engineer-in-charge.(A) Engineer
33 Direction sign (Junction board):-Providing and fixing sing 1.00 No 14831.70
boards made out of 2mm aluminium sheet; size 244 x 122cms.
rectangle as as per the design of IRC-67-1977 pre treated with
phospheting process & acid etching; coated with one coat of
epoxy primer and two coats of best quality epoxy paint;
reflectorised with retro refiective sheeting as per latest
M.O.S.T. Specifications; Letters and numerals should be as per
IRC-30-1968, 3.1m long (2 nos) stand post and frame
fabricated from suitable size iron angle of 50 x 50 x 5mm
75x75x6mm as required; painted with best quality epoxy
coatings in black and white bends. the details of symbol or
inscription / numerals for each board shall be as per the
instruction of engineer in charge. The fixing at site shall be in
1:2:4 CC block of size 45 x 45 x 60cms. for each leg. including
excavation curing etc. complete under the supervision of
engineer in charge.(A) Engineer Grade
34 Hazard Marker Sign :-Providing and fixing sing boards made 8.00 No 2423.73
out of 2mm aluminium sheet; size 90 x 30cms. rectangle as as
per the design/drawing attached (IRC) pretreated with
phospheting process & acid etching; coated with one coat of
epoxy primer and two coats of best quality epoxy paint;
reflectorised with retro refiective sheeting as per latest
M.O.S.T. Specifications; 3.1m long stand post and frame
fabricated from suitable size iron angle of 35 x 35 x 3mm & 50 x
50 x 5mm painted with best quality epoxy coatings The fixing
at site shall be in 1:2:4 CC block of size 45x45x 60cms. for
each leg. including excavation curing etc. complete under the
supervision of engineer in charge.(A) Engineer Grade.
35 Road marking with hot applied thermoplastic paints ( with 809.00 Sqm 367.72
reflectorising glass beads on bitumin surface providing and
laying a hot applied thermoplastic compound 2.5 mm thick
including reflectorising glass beads @ 250gms per sqm area,
thickness of 2.5mm is excluding of surface applied glass beds
as per IRC:35-2015. The finished surface to be level, uniform
and free from streaks and holes. zebra patta /bump patta
lane/center line/ edge line/cut patta. The white color marking
should provide liminance coefficinet on cemend road shalll be
min 130 mcd/m2/lux and Asphalt road shall be min
mcd/m2/lux during the service life during the day time. The
marking should meet the performance criteria for night time
reflectivity, wet reflectivity and skid resistance as mentioned in
the section-15 of IRC 35-2015. Warranty for the Retro
reflectivity should be two years.
36 Cat Eye / Road Stud / RPM: Supplying of Molded Twin Shanks 468.00 No 326.23
Raised Pavement Markers made of polycarbonate and ABS
moulded body and reflective panels with micro prismatic lens
capable of providing total internal reflection of the light entering
the lens face and shall support a load of 13635 kgs. tested in
accordance to ASTM D 4280 Type H and complying to
Specifications of Category A of MORTH Circular No
RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width
and length shall not exceed 20 mm, 130 mm and 130 mm and
with minimum reflective area of 13 Sqcm on each side and the
slope to the base shall be 35 +/- 5 degree. The strength of
detachment of the integrated cylindrical shanks, (of diameter
not less than 19 +/- 2 mm and height not less than 30+/- 2 mm)
from the body is to be a minimum value of 500 Kgf. Fixing will
be by drilling holes on the road for the shanks to go inside,
without nails and using epoxy resin based adhesive as per
manufacturers recommendation and The color of the marker
should be as per the IRC 35-2015 and as directed by Engineer-
Rupees Two Crore Thirty Nine Lakh Ninty Three Thousand Four Hundred Ninty Four and Paise Twenty
Fixed Deduction for available material from dismantling for First R.A. Bill -33,631.00
I/We am/are willing to carry out the work at… % above/below percent(Should be written in figures and words) of the estimated
rate mentioned above. Amount of my /our tender works out as under.
* Estimated Amount 2,39,93,494.25 * Estimated Amount
Put to tender Rs…………………… Put to tender Rs……………………
Deduct……..……..% Belowe Rs…………..….……. Add……..……..% Above Rs…………..….…….
In words………………….……………… In words………………….………………
Note :- 1.The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-
Charge for which no extra payment shall be made.
Note :- 2.The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
Note :- 3.GST and Income tax TDS will be deducted at a source while making payments of bills
Note :- 4.In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-
10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a
change as per actual mix design the cost of difference of cement consumption have been deducted from the rate of
original item at the rate of input rate mentioned in all the tender.
Signature of Contractor
Note:- Amount Rs.33631 of Dismentalled materials Shall be Recovered from 1st RA Bill of Contractor at Once.
Deputy Executive Engineer Executive Engineer
Panchayat R.& B. Sub Division Panchayat R.& B. Division
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
1 SBD Juna Amrapar Raisangpar Joining Ghanshyamgadh Road.pdf
2 Specification.pdf
3 Sch -B.pdf
4 Qty Sheet.pdf
5 Test Shedual.pdf
6 Circular Compress.pdf
7 CC Road Condition and photoes etc Compresss.pdf
8 DRG Juna Amrapar Raisangpar Joining Ghanshyamgadh Compress.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .