CIVIL

EARTH WORK EXCAVATION FOR FOUNDATIONS AND DEPOSITING ON BANK, FOR ALL LIFTS AND WITH AN INITIAL LEAD OF 10M INCLUDING ALL INCIDENTAL, OPERATIONAL, LABOUR CHARGES SUCH AS SHORING, SHEETING, PLANKING, STRUTTING, ETC. COMPLETE FOR FINISHED ITEM OF WORK EXCLUDING DEWATERING CHARGES ETC AS PER SS - 20 B FOR STIFF BLOCK COTTON SOIL , HARD RED EARTH, MURRAM, ORDINARY GRAVEL - MANUAL MEANS UP TO 3M DEPTH - FOUNDATION OF BUILDING (APSS 308).

CEMENT CONCRETE (1:5:10) PROP. USING 40MM HARD GRANITE MACHINE CRUSHED METAL WITH MACHINE MIXING UP TO PLINTH LEVEL INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LAYING, CURING, FINISHING, ALL OTHER INCIDENTAL, OPERATIONAL, LABOUR CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. FOUNDATION BED AND UNDER STONE SLAB FLOORING. (APSS NO: 402).

VIBRATED PLAIN CEMENT CONCRETE Nominal Mix (1:2:4) CORRESPONDING TO IS 456 USING MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL (COARSE AGGREGATE) FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND), WATER ETC., TO SITE, (EXCLUDING SEIGNIORAGE CHARGES), ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS MIXING, LAYING & VIBRATING CONCRETE FINISHING TO SURFACE CURING ETC., COMPLETE FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR FIXING ANGLES

PAINTING TO NEW IRON WORK TWO COATS WITH SYNTHETIC ENAMEL PAINT OF APPROVED BRAND AND SHADE OVER ONE COAT OF RED OXIDE PRIMER COAT (TOTAL 3 COATS) INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL INCIDENTAL, OPERATIONAL & LABOUR CHARGES FOR PREPARING AND CLEANING THE SURFACE OF DIRT WITH SOAP AND BRUSHES, INCLUDING PUTTY, ETC., COMPLETE FOR FINISHED ITEM OF WORK. (APSS NO.1201, 1207, 1212).

SUPPLYING AND FIXING OF 50 X 50 X 6 MM IRON ANGLE OF LENGTH 3.00M OF TOTAL LENGTH, OUT OF WHICH 0.50 m EMBEDED IN C.C(1:2:4) CONCRETE, EXCLUDING COST OF CC (1:2:4), DRILLING HOLES ETC., COMPLETE INCLUDING COST OF ALL MATERIALS TO SITE, LABOUR CHARGES, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES ETC. COMPLETE FOR FINISHED ITEM OF WORK.

SUPPLYING AND FIXING OF 25 X 25 X 2.60 MM MS HALLOW PIPE HORIZONTALLY FOR FIXING GALVALUME SHEET OF 2.40 M HEIGHT ALONG VERTICAL ANGLES INCLUDING DRILLING HOLES ETC., COMPLETE INCLUDING COST OF ALL MATERIALS TO SITE, LABOUR CHARGES, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES ETC. COMPLETE FOR FINISHED ITEM OF WORK.

Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. of Sheet Width: 1.0 m and Length: 2.40 Meters using SS self drilling screws to the existing MS pipes including cost and conveyance of all materials to site and labour charges etc., complete.