SPECIAL REPAIR TO BLDG NO P 91 IN ZONE Q AT MIL STN AGARTALA

Amount

Schedule'A' Part-I: B&R works

Dismantling of AC sheet corrugated / CGI corrugated sheets in roofing any gauge and any thickness including ridge, valley/gutter etc.

Dismantling floor, hearth or wall tiling including cement mortar bedding,(but not backing) removing serviceable tiles to store and rubbish off the premises.

Dismantling wall / ceiling board (fibre pulp insulation) or insulation boards any thickness including cover fillets

Demolition of cement concrete of any description not other wise specifically provided for

Demolition and breaking up 100 mm dia internal dia bore drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar

Demolition of brick work built in cement mortar.

Demolition of reinforced cement concrete of any description and in any position not other wise specifically provided for

Taking out complete existing roof treatment from roof surface & roughening of old concrete floor surfaces incl cleaning the roof surfaces by brushing sweeping etc and removing rubbish n exe 50 meter as per direction of Engr-in-charge.

Taking up or down 15 mm bore steel water tubing & connections, including cleaning or refixing or removal to store.

All as per item No 9 above but 20 mm bore -ditto-

Taking down chowkats or frames but with shutters (without taking off shutters from the frames) exc 1.50 sqm but n.exc 4 sqm each.

Taking down chowkats or frames but with shutters (without taking off shutters from the frames) not exc 1.50 sqm each.

Hacking out old broken glass ( any thickness, sizes, quality or description) from wooden frames or glazed with putty or fixed with beads

S&F sheet glass of 4 mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sqm but in frosted.

S&F sheet glass of 4 mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws as specified.

Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws as specified.

S&F Plain, solid, stright chowkats in 2nd class hard wood and framed rebates on the solid rounded or chamfered put together with glue pinned at joints including making rebate for fixing shutter as per site requirement.

S&F 35mm thick Factory made Flush shutter solid core construction with block board core and plywood face panels commercial type on both sides

M&L mild steel work such as hold fasts, hooks, clamps etc and similar work conforming to Fe 290. Gde-165

Cutting holes in to brick wall for inserting bold fast & making good dismantled portion in cm (1:3) or PCC (1:2:4) type B1, exe half brick but not exe 1 brick.

S&F steel windows with side hung shutters including projecting type hinges with steel handle ,and steel peg stay ,complete with glazing bars, dovetailed or welded .

M&L mild steel work such as grills, guard bars etc and similar work conforming to Fe290 GDE E-165

M & L for Painting in wooden surfaces with two coats synthetic enamel paint over a coat of pink primer incl preparations over 10 cm width or girth.

M & L for two coats of whitewash over a coat of primer after preparing the new surfaces .

M & L for two coats of whitewash after preparing the old surfaces .

M&L for 2 coats of synthetic enamelled paint over coat of red oxide zinc chrome on steel surfaces over 10cm width or girth including preparation of new surfaces.

M&L for 2 coats of synthetic enamelled on steel surfaces n.exe 10cm width or girth including preparation old painted surfaces.

S&F 125 mm size Butt hinges, heavy weight, cold rolled mild steel with galvanised MS sheet hinges pin anodised.

S&F 150mm size extruded aluminium alloy handles, fabricated type anodized.

S&F 200mm long aluminium anodized barrel tower bolts of extruded section.

S&F Mild steel sliding door bolts of size 300mm length of bolt, plate type, stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate & two on staple plate.

M&L 15 mm thick screed bed or bedding layer of mortar in cm 1:4 for laying floor tiles

M&L 10 mm thick rendering bed to wall in cement mortar (1:4)

M&L non skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) area of each tile exceeding 0.06sqm but not exc 0.11sqm in floors, set & jointed in neat cement slurry & pointed with white/coloured cement to match

M&L glazed ceramic coloured tiles 300 x 200 x 7 mm thick on skirting/dado, set & jointed in neat cement slurry & pointed with white/coloured to match

M&L machine cut kota stone slab flooring 20 mm thick over screed base including cutting & polishing etc complete

All as per item No. 40 above but as in dado/skirting, riser etc to be cutting required size.

Taking down cement plaster on brick concrete surfaces including racking out joints hacking for key, scrubbing down with, water etc.

M&L 10 mm thick rendering in cement mortar (1:6) on other than fair faces of brick work finished even & smooth without using extra cement complete all as specified and directed.

M & L for 5 mm thick rendering in CM (1:4) on fair face of concrete surfaces as in ceiling etc finished even and smooth without using extra cement.

M&L for Brushing neat cement slurry @ 3.00 Kg per sqm over old roof surfaces

M&L 15mm thick rendering in cement mortar (1:3) on concrete surfaces with integral water proofing compound @ 3% by wt of cement, (Note: Water compound measured & paid separately) finished even and fair.

M&L for clearing of plastered roof surface & applying one coat of cold bituminous primer @ 0.25 lits per sqm conforming to IS 3384-1986, and applying a layers of APP based polymeric membrane, 3mm thick (minimum) weight 3.50 Kg/sqm reinforced with polyester non woven fabric (weighing not less than 160 gms/sqm) shall be applied over Bituminous primer (Application of polymeric membrane shall be by torch application, over laps shall be minimum 100mm on the transverse direction & 75 mm on the longitudinal direction) coved fillet in PCC (1:2:4) type BO of radius 75 mm shall be provided at the junction of roof& other vertical surfaces & surfaces shall be painted with hot paving bitumen of penetration value 30/40 conforming to IS 73 @ 1.20 kg/sqm over a coat of bituminous primer @ 0.30 litres per sqm & applying one coat of aluminium paint over the APP modified membrane @ 0.11 kg/sqm all as specified and directed.

Supply only integral water proofing compound

M & L complete removal of internal wall finishes by scrapping down and preparation of plastered or unplastered surfaces by applying 3mm wall care putty and applying two coats of oil bound distemper over a coat of primer on old/new plastered surfaces . Make : Asian Paints (tractor uno)/ Berger (Jadoo)/ Dulux(weather shield)/ ICI (signature or power flex) or equivalent.

M&L applying two coats of weather coat on old / new plastered surfaces of wall over a coat of primer after applying a thin layer of wall care putty including removal of existing treatment and preparation of old or new plastered surfaces to receive paint complete all as specified and directed . Make Asian Paints( Royal)/ Berger (luxol silk splender)/ ICI (dulux velvet touch) or equivalent.

S&F exposed GI powder coated snap grid frame for false ceiling 600 x 600 mm size of wall angle 25 x 25 x 0.35 mm size of cross sec 24 x 38 x 0.70 mm with 2 mm dia GI suspender including supply and fixing of 4 mm thick E board in false ceiling fixing arrangement from steel tress any type of tress comeback with two coats of washable distemper over a coat of cement prime on exposed surfaces all as specified (Make: Everest or equivalent as approved by GE/AGE (I)).

S&F 20mm Gun - metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or for unions and fixed .

S & F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. ( Minimum weight 60 gms )

S & F in repairs Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe ) urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement ; flush pipe, grating and union for discharge pipe complete all as specified and directed. ( Make - Cera/Prayag/Parryware/Hindware )

S&F pvc connector 15mm size with PTMT nuts of length 600 mm .

S&F 15mm bore stop valve fancy type, chromium plated , screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions. (Make - Cera/Prayag )

S&F 15mm bore medium grade galvanised steel water tubing with all fitting & fixed complete to walls or ceiling or laid in floors.

All as per item No 54 above but 20mm bore

M&L 75 mm thick cement concrete type B-2, 1:3:6 ( 40 mm graded stone aggregate ) as in Plinth protection, sub base finished even and smooth without using extra cement (laid in alternate bags).

S&F Rotational moulded polyethylene water storage tanks three layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I of 500 Ltr capacity.ISI Marked complete all as specified.

S&F 20mm bore ball brass valve high pressure with polythene float & fly nut complete screwed for iron pipe or brass ferrule.

Supply and fix 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls only integral water proofing compound

Supply and fix 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls only integral water proofing compound

Supply and fix 75 mm bore PVC (SWR) bends in any types.

Supply and fix 110 mm bore PVC (SWR) bends in any types.

Supply and fix 110 mm bore PVC (SWR) vent cowl

M&L for 2nd class HW in small fittings such as wooden cleats stopper including all necessary labour article n.exc 200 cm each.

M&L TMT bars of 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia.

M&L form work to sides and soffits of floor or roof beam, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.

M&L RCC type B1 (1:2:4) using 20 mm graded aggregate in slabs supported on walls, beams and columns in floors, roofs, landing, balconies deck slabs and in shelves and like.

M&L Brick work with sub class B bricks straight or curved on plan exe 6 m mean radius built in cement mortar 1:6

M&L Brick work with sub class B bricks straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4

Material and labour PCC 1:3:6 type C2 using 40 mm graded aggregate as in surface channel/drain complete all as specified and directed.

Material and labour Extra for form fair finished drain on channel 30 cm inner girth in cement concrete using extra cement including forms, moulds mitred stopped end etc complete all as specified and directed.

Add or deduct from item No.71 above for each 25mm girth or part thereof over or under 30 cm girth complete all as specified and as directed.

Material & Labour for writing letters or figures (block, Roman, Italic or Indian) n.exc.30 cm high complete all as specified and directed.

Schedule'A' Part-II: E&M works

Taking down carefully to existing copper/Aluminium point wiring (light, socket or power) complete including fittings such as switches, ceiling roses, pendants, sockets, boxes, light fitting etc and removing from site and making good disturbed surfaces of walls, floors etc complete all as specified.

Point wiring with PVC insulated and unsheathed multistranded FRLSH copper conductor single core 1.5 Sqmm (nominal area) cable using approved colour code as per IS drawing in and incl PVC casing and capping (ISI Mark) with all accessories including providing sunk cast pressed steel terminal boxes off size made out of 1.5mm thick MS sheet duly painted with black bitumen paint over a coat of red oxide primer and providing 3 mm thick plastic laminated Bakelite sheet(HYLEM) top cover along with copper earth wire PVC insulated & unsheathed multistranded(FRLSH) copper conductor cable of size 1.5sqmm as continuous earth wire connected to common earth and earth dolly complete all as specified for the following type :-

One light / Fan / Bell point controlled by one way switch 6 Amp .

One 3 pin socket outlet 5 Amps on the same board with other switches

One 3 pin 5 Amp socket out let controlled by one switch on independent board

Point wiring for Power point contolled by one 15 Amp switch independent with PVC insulated and unsheathed multistranded FRLSH copper conductor single core 4.0 Sqmm (nominal area) cable using approved colour code as per IS drawing in and incl PVC casing and capping(ISI Mark) with all accessories including providing sunk cast pressed steel terminal boxes off size made out of 1.5mm thick MS sheet duly painted with black bitumen paint over a coat of red oxide primer and providing 3 mm thick plastic laminated Bakelite sheet(HYLEM) top cover along with copper earth wire PVC insulated & unsheathed multistranded(FRLSH) copper conductor cable of size 2.5 Sqmm as continuous earth wire connected to common earth and earth dolly complete all as specified and as directed. Make of wire : Finolex/Havells/Polycab.

Supply & fixing switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts complete all as specified & directed. Make : Havells/Anchor/Legrand/SSK

Supply & fixing switch piano flush type (ISI marked), single pole, one way 16 Amps, 240 Volts complete all as specified & directed. Make : Havells/Anchor/Legrand/SSK

Supply and fixing socket outlet 2 in 1, 3 pin, 6 Amp piano complete all as specified & directed. Make : Havells/Anchor/Legrand/SSK

Supply and fixing socket outlet, 2 in 1, 3 pin 16/15 Amp, piano flush type complete all as specified & directed. Make : Havells/Anchor/Legrand/SSK

Material & labour for lamp holder insulated body with back plate suitable for batten fittings complete all as specified & directed. Make : Havells/Anchor/Legrand/SSK

Supply and fixing ceiling rose, surface bakelite, 65mm x 50mm , two to three terminals complete all as specified & directed. Make : Havells/Anchor/Legrand/SSK

S&F as in replacement LED building security light 30 watt, 230V, 3000 lumen output complete with all accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable, One GI medium grade 20mm dia bracket of total length 50 cm and fixed to wall with 2 Nos MS Clamp and fastener incl dismantling taking down unsv fitting any type all as specified and directed. Make- Havells cat part No.ENDURACITYLITEPLATPLUSSL30WLED757SASYBOPC or equivalent approved make of Crompton/Philips/Bajaj/Jaquar

S&F MAXOLED (TUBE) 20 Watt LED tube with single side connection, 20 Watt LED 6500K, 2000 lumen output and MAXOLED BATTEN - for T8 Retro Lamp (G13) ultra bright glass sheet glare free, wide angle, single side connection retrofit LED tube with G13 lamp suitable for maxoled LED tube , 230 Volts, 4 feet long , complete with all accessories internally pre wired and including connecting up to ceiling rose with 0.5 sqmm twin core copper flexible conductor cable incl LED lamp and mounting casing box 2 nos all as specified and directed. Make-Havells cat part No. Tube :- LHLDEFXD5L8R020 and BATTEN Cat Part- LHFXCEP1TNNW020 or equivalent approved make of CG/Philips/ Bajaj/Jaquar

S&F wall mounted LED mirror light fitting 1x09 Watt,240 volt , 900 lumen output, white polycarbonate housing and integrated electronic driver, Make Havells cat part No LUMILNEBS9WLED865SPCWH, or equivalent approved make of Bajaj/Philips/Havells/ Jaquar, prewired complete in all aspect all as specified and directed.

S&F LED Adore 10 watt B-22 CDL Ball Lamp, 6500K , 1000 lumen output,(Pin type), 230V, PF not less than 0.85 (min) incl . Make-Havells cat part No. LHLDERUEML8X010 or equivalent approved make of CG/Bajaj/ Philips/Havells/Jaquar

Supply and fixing MCB, single pole 'B' series having braking capacity 10 KA, 6 to 32 Amp, 240 volts, complete all as specified & directed. Make : Legrand/Schneider/Havells

Supply & Fixing MCB SPN having braking capacity 10 KA, 35-60 Amp, 240 Volt 'C' Curve complete all as specified and directed. Make : Legrand/Schneider/Havells

Supply & Fixing sheet metal enclosure with double door for DBs conforms to IS:8623.III , IP:43 protection, shrouded neutral link & earth bar and cement spill protector, 8 way, 240 Volt . Make : Legrand/Schneider/Havells

Supply and fixing fan regulator 100/120 watt step type AC 220 volts complete all as specified and as directed Make : Anchor cat no 14501 or equivalent approved make of Havells.Legrand /Schneider

Supply and fixing as in replacement MCB DB Vertical TPN 4 way (double door) incomer including bus bar neutral link, earth bar and din rail, recessed will wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed by the Engr-in-Charge. Make : Havells cat part No DHDLVDRWGOFO04 or equivalent approved make of Legrand/Schneider/L&T

Earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of suitable GI nuts/bolts and brazed properly up to main board including earth pit in cement concrete 1:2:4 type B-1, precast RCC cover in 1:2:4 reinforced with expanded metal, with suitable handle, excavation and earth work in any type of soil and including medium grade GI watering pipe 25mm bore with funnel wire mesh and medium grade GI wire protection pipe 25mm bore up to main board complete as shown in electrical plate No 3 of MES schedule Part-I 2009, connected to earthing testing point including taking out existing unsv earthing complete ass as specified and testing on completion complete ass as specified and directed .Note - The units rate including the cost of excavation & earth work in any type of soil, charcoal & salt in alternate layers, 25mm GI pipe (light grade) for watering 25mm GI protection pipe (light grade) funnel wire mesh PCC chamber in PCCcomplete all as specified and as directed.

M&L heavy duty armoured LT under ground cable of size 16 Sqmm, 2 core 1100 V grade PVC insulated ,PVC sheathed ,multi stranded aluminium cable of following size in pipe /trench /cable duct /fixed on wall by proper size shaped GI clamps with nut bolts etc including lugs for both ends and making good the disturbed surfaces complete all as specified and directed.

Excavation in trench n. exc 1.5 mtr wide and n.exc 1.5 mtr depth and getting out of soft/loose soil/brick all as specified

Removing of excavated surplus soil to a distance not exceeding 50 mtr and depositing/ spreading where directed at level of n.exc 1.5 mtr above the starting point.

Returning filling in spreading, levelling and well ramming in layers n.exc 25 cm thick above the ground level complete all as specified.

M & L for sand cushioning for cable protection with dry river sand and punning to provide required cushioning for UG cable all as specified and directed

S&F bricks well burnt sub class ‘B’ bricks in trenches on cable as cable protection across the length of the cable (width wise) complete all as specified and as directed.

M & L for surface sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 4.0 sqmm (Nominal area) drawn through in and including PVC casing capping/PVC conduit size with all fittings and accessories along with one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 2.5 sqmm as earth lead and connected to earth dolly and making good to disturbed surfaces all as specified and directed. Make of wire : Finolex/Havells/Polycab/Rallison/Plaza. NOTE: (a)Two run of cable with one run of earth wire and one run of casing capping/conduit will be measured as one length.

Hanging or Refixing of Ceiling Fan any size Including provision of suitable flexible cable as required complete all as specified and directed.

M/S New Saha Enterprise

M/S PAUL ENTERPRISE

M/S SANKAR GOPE