ADDITION / ALTERATION CUM SPECIAL REPAIRS TO CERTAIN MD ACCN AT RAMGARH UNDER GE RAMGARH CANTT

Amount

M&L for rougheing surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. complete all as specified and as directed.

M&L for brushing neat cement slurry with 3 Kg of cement per sqm complete all as specified and as directed.

M&L for non- skid coloured ceramic tiles, 8mm thick and area of each tile (600 x 600) mm as in floor or skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for non- skid coloured ceramic tiles,7 to 8mm thick, area of each tile exc 0.06 sqm but n exc 0.11 sqm as in floor or skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor complete all as specified and as directed.

S&F glazed ceramic tiles as in vertical surfaces of size (600x300)mm x7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including screed bed 10mm thick in cement mortar (1:4) complete all as specified and as directed.

M&L for glazed ceramic coloured tiles of size (450 x 350)mm x 7mm thick as in vertical surfaces such as skirting, dado and risers to steps, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and as directed.

M&L for 20mm thick granite (of any type) work, table rubbed and pollished as in cooking platform and like with and including over cement screed bed (1:4) including pointing in white cement (1:2) using marble dust with admixture to match with shade of granite complete all as specified and as directed.

M & L for machine cut Kota stone slab flooring 22-25mm thick with and including over cement screed base with CM (1:6), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and as directed.

Rounding to edges of stone slabs on edge such as in steps, coocking platform and other similar situations complete all as specified and as directed.

M&L for rendering 15 mm thick screed beed in cement mortar (1:4) for tile work complete all as specified and as directed.

M&L for rendering 10 mm thick in CM (1:4) on concrete/brick surfaces for tile work complete all as specified and as directed.

Taking down cement plaster including racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar (1:4) on concrete/brick surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar (1:6) on concrete/brick surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 5 mm thick in cement mortar (1:3) as on ceiling of brick or concrete surface, finished fair and even complete all as specified and directed.

M&L for preparing newly plastered surfaces and applying two coats of distember oil emulsion white or tinted on walls over a coat of white primer with and including over a coat of 3mm thick cement based wall care putty complete all as specified and directed.

M&L for three coats of white wash on new plastered surface of walls including preparation of surface on walls complete all as specified and directed.

M & L for three coats of white wash on new plastered surface including preparation of surface on ceiling complete all as specified and as directed.

M&L for preparing the new plastered surfaces of wall and applying two coats of cement based paint over a coat of white primer complete all as specified and as directed.

M&L for preparing of old surfaces by complete removal of existing treatment and applying two coats of distember oil emulsion white or tinted on walls after one coat of white primer over a coat of putty complete all as specified and directed.

M&L for preparation of old plastered surface of wall including cornices and apply one coat of white wash complete all as specified and directed.

M&L for preparation of old plastered surface of wall including cornices and apply one coat of white wash complete all as specified and directed.

M&L for preparing the old surfaces by complete removal of existing treatment and applying two coats of cement based paint on walls over a coat of primer complete all as specified and directed.

M&L for preparing the new surfaces of any description not otherwise described over 10 cm width or girth on steel surface and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint on old painted wooden surfaces of any description not otherwise described over 10cm width or girth including preparation of surface complete all as specified and directed.

M&L for prelaminated particle board 18/19 mm thick exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screw to timber frame work as in cupboard.with and including leaping all around complete all as specified and directed.

S&F Hasp & staple,75mm size aluminium anodised including bolt to hinge plate and fixed with screws for cupboard complete all as specified and directed.

S&F Contineous (piano) hinges, mild steel, bright finish or elecrogalvenised, 30 mm width of flaps (when open) complete all as specified and directed.

S&F framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or FE 310-0 complete all as specified and as directed.

S&F 1mm thick Mild steel, plain black sheet in wall clading, steel gate and similar work, cut to size, holes punched, including round headed screws, clout nails or rivets and fixed to steel framing complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from frames) area exc. 1.5 & n exc 4 sqm each, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from frames) area not exc. 1.5 sqm each, complete all as specified and directed.

Taking down shutters of any description area exc 1 but n.exc 2 sqm each complete all as specified and as directed.

S&F solid PVC Door frame of size (50mm x 47mm) made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

Supplied and fixed factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined to gether with solvent cement, suppling & fixing in the frame as per specification & drawing complete all as specified and directed.

S&F 1.25 mm thick Pressed steel frames of size (165x60)mm for doors, windows with one or more rebate including necessary fixing lugs hinges, lock strike plate etc with and including filling holes with PCC (1:2:4) type B0 using 12.5mm graded stone aggregates complete all as specified and directed.

S&F pressed steel frames for doors of size (105x60) mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with and including filling holes with PCC (1:2:4) type B0 using 12.5mm graded stone aggregates complete all as specified and directed.

S&F 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.20 (a); for doors supplied and fitted to chowkats complete all as specified and directed.

S&F 35mm thick 2nd class HW rail and style Plain framed, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F steel window with side hung shutters including box type hinges with steel handle and steel peg stay completely with glazing bars dovetailed or welded complete all as specified and directed.

S&F steel window with side hung shutters including box type hinges with steel handle and steel peg stay completely without glazing bars dovetailed or welded complete all as specified and directed.

M&L Steel ventilator with top hung shutter including hinges steel peg stay complete all as specified and directed.

S&F galvanised stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tack, or galvanised wire staples complete all as specified and directed.

S&F sheet glass 4.00 mm thick ordinary quality in squares area not exceeding 0.5 Sqm each pane etc complete all as specified and directed.

S&F 3mm thick figured glass, pin head type and glazing with oil putty or wooden beads in squares area exc 0.5 Sqm in each pane complete all as specified and directed.

S&F Ordinary rat tail rod pattern, 300mm spring including roller and roller plate complete all as specified and directed.

S&F Aluminium alloy, anodised sliding door bolt of size 250mm with hasp and staple and fixing clips of sheet complete all as specified and directed.

S&F Aluminium anodised barrel tower bolt 150mm long complete all as specified and directed.

S&F Aluminium alloy, anodised handle cast type of size 125mm complete all as specified and directed.

S&F stainless steel Butt hinges medium weight 100mm size, cold rolled mild steel complete all as specified and directed.

S&F bib taps, 15 mm bore, cast copper alloy, chromium plated with crutch or butterfly handle, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F Pillar taps, 15 mm bore, cast copper alloy, chromium plated with crutch or butterfly handle, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S& F shower rose 125mm size cast copper alloy chormium plated with crutch or butterfly handle, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F15mm dia (concealed type) angle stop cock fancy type, cast copper alloy, chromium plated screwed down high pressure, with crutch or butterfly handle, screwed both hands for iron pipe or for unions complete all as specified and directed.

S&F 15mm bore CP cast copper alloy stop valves with long shank and cup (concealed) fancy type screwed down, high pressure with crutch or butterfly handle screwed both for iron pipe or union complete all as specified and directed.

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste coupling including bedding in cement mortar to dwarf wall or including fixing MS cantilever brackets and connecting union to pipe overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specified & directed.

S&F PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR) 'S' or 'P' trap 125/110mm dia complete all as specified and directed.

Supply and fixing in repairs vitreous china squatting pattern 'Orissa pattern' size (580x440)mm white with integral foot rests any pattern including provn of lime concrete bedding and making connection with & including PVC P Trap, etc complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (Pedestal pattern), white (Excluding fliushing cisturn ) etc complete all as specified and directed.

Supply and fixing in repairs PVC valveless syphonic action low level flushing cistern of 10 Ltr capacity including flushing pipe bend etc. complete all as specified and directed.

Supplied and fixed vitreous china Wash hand basin white flat back size (580x450)mm including Supplied and fixed angle iron brackets, cast copper CP waste coupling exclusive fixing of waste pipe complete all as specified & directed.

S & F CP tubular towel rail 20mm dia D type 60cm between two flange complete all as specified and directed all as specified.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hositing if required reconnecting and re-fixing in position and cleaning and removing all scale and dirt, etc. from tanks and form mouths of circulating pipes, etc. complete all as specified and directed.

Supply and fixing in repair, hoisting three layer PVC tank of 500 ltr capacity with ind including 20mm dia brass float valve assembly complete all as specified and directed.

S&F PTMT grating doom 100mm dia complete all as specified and directed.

S&F PVC connection 15mm dia 600mm long with PTMT nut complete all as specified and directed.

S&F PVC waste pipe 32 mm dia and 900 mm long for WHB and Kitchen sink complete all as specified and directed.

S&F Soap dish, cast copper alloy chromium plated of standard size with fittings complete all as specified & directed.

Cutting chases in brick wall and making good to facing where required and pointing in cement mortar (1:3) for concealed water tubing, cutting not exceeding 10 cm girth complete all as specified and directed.

Taking up or down GI tubing and connection including removing to store of 15mm dia complete aall as secified and directed.

Taking up or down GI tubing and connection including removing to store of 20mm dia complete aall as secified and directed.

S&F tubes `medium grade' galvanised with all fittings and fixed complete to walls and ceiling or laid in floors 20mm bore complete all as specified and directed.

Re-fixing 20mm dia old steel tubing and new fittings and connections in new or old position complete all as specified and directed.

S&F tubes `medium grade' galvanised with all fittings and fixed complete to walls and ceiling or laid in floors 15mm bore complete all as specified and directed.

Re-fixing 15mm dia old steel tubing and new fittings and connections in new or old position complete all as specified and directed.

S&F PVC(SWR) pipe 110 mm dia single socketed in any length with rubber ring joints, fixed to wall with and including stack and clamp complete all as specified and directed.

M&L PVC(SWR) pipes 75mm dia single socketed, in any length with rubber ring joints,laid in trenches or fixed to wall with and including stack and clamp complete all as specified and directed.

M&L PVC (SWR) bend of radius 110mm dia complete all as specified and directed.

M&L PVC (SWR) bend of radius 75mm dia complete all as specified and directed.

M&L PVC(SWR) Tee of radius 110mm dia complete all as specified and directed.

S & F PVC(SWR) vent cowel of 110mm dia complete all as specified and directed.

M&L for 40 mm thick PCC (1:2:4) type B-1 using 20 mm graded stone aggregate with WPC as in sunken portion and making adequate slope toward spout pipe complete all as specified and as directed. NOTE: - Water Proofing Compound shall be measured and paid separately

M&L for rendering 15 mm thick on concrete or brick surface in CM (1:3) mixed with WPC as per manufacturer instructions and finishes surfaces even and smooth without using extra cement complete all as specified and directed. Note - WPCshall be measured and paid separtely.

M&L for applying two coats evenly a tack coat of hot air blown bitumen of grade 85/25 @ 1.50 Kg per sqm per coat (one coat over plaster and one coat on polythene film) including cleaning of surface over polythene film complete all as specified and as directed.

M&L for polythene film black 200 micron thick laid in floor, vertical surface etc complete all as specified and directed.

M&L for PCC (1:5:10) Type E-2 using 40mm graded brick aggregate as in sunken portion complete all as specified and directed.

M&L for repair and rendering 10mm thick in CM (1 :3) as on chajjas, facia, roof projection, column sides, beam bottom and sides including throating after removing cracked plaster and concrete including cleaning of visible reinforcement and treating with cement slurry also necessary repair to cracked concrete if any with cement concrete (1:2:4) Type B-0 using 12.5mm graded stone aggregate including necessary scafolding work for double/single storey bldgs complete all as specified and directed.

M&L for roof treatment for non approachable roof including complete removal of existing roof treatment by picking, sweeping clean and washing down with water to remove dust and treatment shoud be done in following sequences :- (i) Rendering 10 mm thick in cement mortor (1:3) mixed with liquid water proofing compound finished the surface fair and even. (ii) Applying evenly a coat of bitumen primer @ 0.30 Kg/Sqm. (iii)Applying 3 mm thick APP modified polymeric membrane, weight not less than 3.50 Kg/Sqm and over lap 100mm and sealed by torch application as per manufacture instructions. (iv) Applying a coat of aluminium paint @ 200 gm/sqm in two coats over polymeric membrene. Note :- WPC shall be measured and paid separately.

M&L for roof treatment for approachable roof including complete removal of existing roof treatment by picking, sweeping clean and washing down with water to remove dust and treatment shoud be done in following sequences :- (i) Rendering 10mm thick in cement mortor (1:3) mixed with liquid water proofing compound finished the surface fair and even. (ii) Applying evenly a coat of bitumen primer @ 0.30 Kg/Sqm. (iii) Applying 3 mm thick APP modified polymeric membrane over the bitumen coat surface ,weight not less than 3.5 Kg/Sqm and over lap 100mm and sealed by torch application as per manufacture insteructions. (iv) A coat of hot blown bitumen @ 1.2 Kg/ Sqm shall be applied over polymeric membrane and blinded with clean dry sand at the rate of 0.5 Kg per Sqm. Note :- WPC shall be measured and paid separately.

M&L 22 mm thick machine cut & polished‘ cement concrete tiles factory made conforming to IS 1237 (ISI marked) with grey cement without pigment of size 250 mm x 250 mm x 22mm thick laid in neat cement slurry with and including over 20 mm thick screed bed in CM (1:4) mixed with chemical compound using as per manufacturer instructions complete all as specified & as directed. Note:- Cutting and polishing of top surfaces of tiles after fixing complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

Dismantling asbestos cement (corrugated/ semi corrugated etc) sheet in roof covering complete all as specified and directed.

S&F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of an colour having tensile strength 550 Mpa as in roof covering fixed with self taping screws complete all as specified and directed.

S&F Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.5 mm thick of an colour having tensile strength 550 Mpa as in ridge, valley, gutters etc. fixed with self taping screws as specified.

M&L for providing and injecting chemical emulsion for post constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 liters per sqm of the vertical surface of the sub structure to a depth of 300mm including excavating channel along the wall and rodding etc complete all as specified and directed.

M&L for voids in masonry using chemical emulsion one litre per hole at 300mm intervals including drilling holes at 45 dgree and repulgging them with cement mortar (1:2) (1 cement : 2 coarse sand) to match the existing floor complete all as specified and directed.

M&L at points of contact of wood work by chemical emulsion ( in oil or kerosene based solution ) @ 0.5 litre /hole by drilling 6mm dia holes at downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed.

Dismantling wall and ceiling boards (fiber pulp, insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified and directed.

S&F Anodised aluminium snap grid size of grid (605 x 605) mm frame work for false ceiling complete all as specified and directed.

M&L 6mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fiber for fixing in 600mm x 600mm grid complete all as specified and directed. Note:- Frame work for ceiling shall be measured and paid separately.

Demolition of brick works masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and pre-cast concrete articles complete all as specified and directed.

M & L for brick work with subclass “B” Old size bricks, straight or curved on plan exceeding 6 m mean radius built in CM (1:6) complete all as specified and directed.

M & L for brick work with old retrieved bricks, straight or curved on plan exceeding 6 m mean radius built in CM (1:6) complete all as specified and directed. Note:- Old brick retrieved from demolition shall be used after cleaning.

Demolition of cement concrete in ground floors and paving exc 15cm thickness but above ground level complete all as specified and directed.

M&L for 75 mm thick PCC type C2 (1:3:6), using 20mm graded stone aggregate as in plinth protection, floors/hard standing finished even and fair without using extra cement complete all as specified and directed.

M&L cement concrete type B-1 (1:2:4) (using 20mm graded stone aggregates) as in surface channels and drain complete all as specified and directed.

M&L for cement concrete 40 mm thick Type B-1,( 1:2:4 ) using 20mm graded stone aggregate as in floor laid in alternative panels, compacted and finished cement concrete surface even and smooth with using extra cement complete all as specified and directed.

M&L for forming Construction joint 30mm deep x 10mm wide filled with sealing compound grade A complete all as specified and directed.

M&L for Pre-polished chequered cement concrete coloured tiles of size 30cm x 30cm x 25 mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment with and including screed bed or bedding layer 20 mm thick in CM (1:6) as in floors complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position complete all as specified and directed.

M & L for pre-cast RCC slab type B1 (1:2:4) for manhole cover set in CM (1:6) etc complete all as specified and directed.

M&L for RCC type B-1, (1:2:4) (using 20mm graded stone aggregate) as in slabs supported on walls complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooking columns hoping ends and binding with mild steel wire (annealed ) not less than 0.9 mm dia on securing with dips complete all as specified and directed.

Use and waste of formwork to soffits of flat suspended slabs such as cooking platform not exc 200mm thick (Horizontal or sloping) for fair finished surfaces complete all as specified and directed.

Use and waste of formwork to edges of cooking slabs exc 5cm but not exc 10cm wide fair finished surfaces complete all as specified and directed.

M&L for mild steel deformed TMT bar upto 10mm dia cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Excavating in trenches, n exc 1.5M wide and n exc 1.5M depth; for foundation etc. or for shafts, wells, cess pits, manholes, pier holes etc n exc 10 Sqm on plan and n exc 1.5M in depth and getting out in hard/dense soil complete all as specified and as directed.

Returning filling in, including spreading leveling, watering and well ramming in layer n. exc 25 cm in soft/loose soil complete all as specified and directed.

Removing excavated material to a distance exc 250 m and n. exc. 500 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.

Demolition and breaking up SGSW drain pipes 150mm internal dia or of any bore etc complete all as specified and directed.

M & L for 150mm dia reinforced concrete pipes, class NP2 pipes laid in trenches and jointed complete all as specified and directed.

M&L concrete bed to drain pipe 150mm dia bore including packing under and complete surrounding pipe with cement concrete (1:3:6) type C-2, after they are laid and tested complete all as specified and directed.

S&F PVC bath cabinet mirror box type size (350mm x 450mm) with shutter complete all as specified and directed. Make Prayag or equavalentas approved by GE.

S&F in repair Central Hole Basin Mixer with Popup Waste System with 450mm Long Braided Hoses complete all as specified and directed.Make:- Jaquar Cat No CQT-23169B or eqivalent of other make as approved by GE.

S&F Brass CP mixer for mixing hot & cold water screwed down for 15 mm bore dia of iron pipe complete all as specified and directed.

Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed at site.

Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed.

Taking down carefully copper/aluminium Sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.

Taking down existing geyser of any capacity after disconnecting all necessary electrical and water supply connections and deposit to MES store yard of AGE E/M Ramgarh complete all as specified and as directed.

Taking down ceiling fan/ exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M Ramgarh complete all as specified and as directed.

Taking down existing single phase/ three phase electronic energy meter of any capacity after disconnecting all necessary electrical connections and deposit to MES store yard of AGE E/M Ramgarh complete all as specified and as directed.

M&L for point wiring with 1.5 Sq mm single core PVC insulated unsheathed copper FRLS multi stranded conductor cable in and including Concealed PVC conduit of size 20/25mm ISI marked inclusive of tees ,bend ,elbows etc upto and including sunk in anodized pressed steel box for housing switch socket etc with white laminated 3 mm thick hylam sheet cover ISI marked of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sq mm FRLS cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed by Engr-in-charge for following :- (a) One light point controlled by one, one way switch 5 Amps

(b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

(c) One light point controlled by one, two way switch 5 Amps

(d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board.

(e) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

(f) One bell point controlled by one, bell switch 5 Amps

Description all as per item No 136 here in before but using 2.5 sq mm single core copper conductor cable of multistranded FRLS PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combination point including necessary running of 2.5 sq mm copper conductor FRLS PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly complete all as specified and as directed.

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following :- (a) One light point controlled by one, one way switch 5 Amps

(b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

(c) One light point controlled by one, two way switch 5 Amps

(d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board.

(e) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

(f) One bell point controlled by one, bell switch 5 Amps

Description all as per item No 143 here in before but using 2.5 sq mm single core copper conductor cable of FRLS multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm PVC copper conductor FRLS cable as earth continuity conductor along with wiring and connecting to the common eath dolly complete all as specified and as directed.

All as per item No 143 here in before but using 4.0 sq mm single core copper conductor FRLS cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 4.0 sq mm PVC insulated copper conductor FRLS cable as earth continuity conductor along with wiring and connecting to the common eath dolly complete all as specified and as directed. (for AC Point)

S & F for Switch Piano type single pole 5 amp, 230 Volts complete all as specified and directed at site.

S & F for Switch Piano type 2 way switch 5 amp, 230 Volts complete all as specified and directed at site.

S & F for switch bell push piano type 5 amp, 230 Volts Complete all as specified and directed at site.

S & F for socket outlet 2 in 1 , 5 pin, 5 amp, 230 Volts complete all as specified and directed at site.

S & F for Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified

S & F for stepped type electronic fan regulator flushType complete all as specified and directed at site.

S & F for Modular Switch piano flush type, single pole, one way, and 5/6 Amp single module complete all as specified.

S & F for Modular Switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified.

S & F for Modular Switch piano flush type, single pole, two way, and 5/6 Amp single module complete all as specified.

S & F for Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified.

S & F for Modular Switch Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified.

S & F for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.

S & F for for Bell push modular 6 Amps single module complete all as specified.

S & F for lamp holder , PVC / Polycarbonate type with back plate suitabl for batten/ slanting fittings complete all as specified and directed.

S & F for Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed.

S & F for Modular type TV Socket out let complete all as specified and as directed.

M & L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLScable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc two runs of PVC insulated with 6 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Four runs of 6 sqmm cable, two runs of 6 sqmm cable and one run of PVC conduit will be measured as one unit.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit.

S & F for sheet metal enclosure MCB DB TPN 4 way Vertical type with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

S & F for MCB tripple pole and neutral rated capacity 63 Amps, 415 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

S & F for MCB Single pole and neutral rated capacity 40 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

S & F for MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

S & F for metal clad industrial socket suitable for 230 volt 50 Hz AC supply three pin with MCB SP 20/32 Amps complete all as specified and as directed complete all as specified and as directed

Supply and fix Water heater storage type, electric,capacity 25 litres BEE 5 star rated for JCO's and OR Md Accn complete all as specied and as directed. Make : Havells/Bajaj/CG

Labour only for refixing the celing fan/ Exhaust fan obtained from item No 5 above with replacement of unserviceable 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal including overhauling the fan, painting of ceiling fans complete with two coats synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc. complete all as specified and as directed.

S & F for Highly efficient LED Bulbs, 10 W, used as a ready replacement for existing GLS/CFL direct fit lamp,in B-22 cap of make Bajaj, Havells, HPL complete all as specified and directed.

S & F for Decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for LED bulb and provosion of LED bulb 10 watts complete all as specified and as directed. Make Havells Cat No LHDLO6160099 or its equvalent in Philips, Bajaj.

S & F for LED 10 watts batten aluminium extruded with decorative end caps complete all as specified and as directed. Make- Bajaj Cat Part No BCLSB 10 NW or its equivallent model in Wipro, Philips.

S & F for Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired with warranty option of 5 years from date of installation and necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and as directed. Make :- Bajaj Cat No BIBWP 10W LED or its equvalent in Philips, Wipro.

S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make :- Make Bajaj Cat part No BCLAB 20W WH LED P, Wipro Cat part No LL20-281-XXX065-ALI or its equvalent in Philips, Havells.

S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. Make :- Bajaj Cat part No BCLST25WLEDIV2 (Edge plus series) or its equvalent in Philips, Wipro.

S & F for energy efficient exhaust fan of 230 mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base compelte all as specified and directed. (Note : Cost of suitable opening wall for fixing exhaust fan is deemed to be included in overall rate quoted).

S & F for PVC non-metallic rigid conduit ISI marked heavy duty white/ Ivory colour and its accessories heavy duty ISI marked of size 20 mm dia for LAN, telephone and TV connections including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed.

Taking down existing old existing unserviceable LT UG service cable of any description and size complete all as specified and directed.

Supply and laying XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavyduty) with aluminium conductor, 1100 volts, grade cross sectional area 35 sq. mm 4 core complete all as specified and directed.

Supply and laying XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavyduty) with aluminium conductor, 1100 volts, grade cross sectional area 25 sq. mm 4 core complete all as specified and directed.

Supply and laying XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavyduty) with aluminium conductor, 1100 volts, grade cross sectional area 16 sq. mm 4 core complete all as specified and directed. Note for srl item No. 189 to 191:- Excavation, earthwork and protection of cable shall be measured and paid seperately.

M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 20 mm dia. light grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe medium grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate No 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion. Note :- GI earth wire 4 mm dia and 20 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.

Material and labour for clean dry sand laid in trenches/ducts for bedding and cushioning to cable, including spreading and levelling complete all as speccified.(Note:-Puned thickness shall only be considered for payment.)

Material and labour for laying in trenches burnt brick sub class 'B' for cable protection laid adjacent to each other length wise perpendicular to the central axis of cable complete all as specified.

Associated Engineers

M/s Deepak kumar sinha

Nand Lal and Sons

MD BUILDER