PROVISION OF FOCUS LIGHTS, SECURITY LIGHT BOLLARD LIGHT FITTINGS AT CGAE, KOCHI PROVISION OF SECURITY LIGHT, FLOOD LIGHT GARDEN LIGHT AT CGRA, RAMESWARAM AND PROVISION OF STREET LIGHT, FOCUS LIGHT, SECURITY LIGHT BOLLARD LIGHT FITTINGS AT ICGS

Amount

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth for foundation in soft/loose soil and getting out complete all as specified and as directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soil complete all as specified and as directed.

Removing excavated soil to a distance not exceeding 50m and deposited where as directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.

Laying only LT XLPE insulated, galvanised steel strip or wire armoured electric power cable (heavy duty) with stranded aluminium conductor 1100 Volts grade 10 sqmm, 4 core with all required clamps etc. along the wall/in trenches complete all as specified and as directed. NOTE: XLPE cable will be provided by the department at site.

Laying only High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in trenches 40 mm bore complete all as specified and as directed. NOTE: HDPE will be provided by the department at site.

Material and labour plain cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in foundations and mass concrete all as specified and as directed.

Material and Labour for plain cement concrete 1:3:6 type C1 using 20mm graded granite stone aggrgate as in coping, slightly rounded or chamfered angles and throating including use of necessary form work all as specified and as directed.

Cutting the existing bituminous road/cement concrete hard standing surface to the required width and depth for laying UG cable and making good the disturbed surface of road/path to even surface to match with existing level using plain cement concrete 1:3:6 type C2 using 40mm graded stone aggregate and dispose off debris and soil to a distance as directed by Engineer-in-charge.

Material and labour for two runs of single core multistranded copper conductor 2.5 sqmm, FR, PVC insulated and unsheathed drawn through and including 25mm medium grade non metallic rigid PVC conduit with all accessories laid in floor/trenches including one run of 2.5 Sqmm copper (insulated) cable as earth continuity conductor complete all as specified and as directed. Note : 3 runs of 2.5 Sqmm cable and PVC Conduit shall be measured one unit length.

Supply and fix FRP terminal box of size 167mm x 125mm x 82mm, having 3 way gunmetal terminals for cable in/out with and including one MCB SP 6 Amps having breaking capacity 10 KA complete all as specified and as directed.

Supply and fix MCB SPN, AC 240 Volts 16 Amps 10 KA rupturing capacity Curve 'C', IP 20, transparent lebel holder fully insulated safety shutters suitable for cable up to 35 Sqmm cross sectional area complete including suitable size copper lugs complete all as specified and as directed.

Fixing only 8/10 watt LED bollard light fitting any type/make, all accessories prewired, fixing connecting up complete all as specified and directed. NOTE: (i) Bollard fittings will be provided by the department at site. (ii) Excavation and earth work, PCC foundation shall be measured and paid separately.

Fixing only 48/ 70 watt LED flood light fitting any type/make all accessories prewired, fixing connecting up complete all as specified and directed. NOTE: Flood light fittings will be provided by the department at site.

Supply and fix street light bracket using 40 mm dia GI pipe light grade, 1.5 metre long, 30 degree bent to shape and fixed with 40 x 6 mm flat iron clamp-02 Nosand suitable size of nuts and bolts of GI etc fixed on poles complete all as specified and directed.

Supply and fix 70 watt LED Post top light with aluminium enclosure, powered with high power LEDs as light source and die casted heat shrink exhibits classic victorian look with symmetrical light distribution and excellent heat dissipation for long life, fixed with all accessories prewired on existing pole/ buildings complete all as specified and directed. Make: Cat No.BARONPT70WLED757PSYMTOPC of Havells or equivalent in crompton Greave/Philips.

Supply and Fix post top urban decorative ornamental luminarie, Delta (Cast iron) pole of height 3600mm from base and luminaire top height of 900mm with IRIS-N (TSL-83 IP) fitting 4x55/65 watt CFL or 1x45 watt LED complete all as specified and as directed. Make: Cat No. GAOR-3222 of CELS or equivalent in crompton Greave/Philips/Havells.

Supplying, fabricating, Installation, testing and commissioning of LT Feeder Pillar Box outdoor type having provision of double door openings into two halves with rubber beadings cubical type of minimum size 0.90x0.80x0.30 Mtr (L X H X D ) made out of 3.15 mm CRCA sheet compartmentalized with rubber beadings, angle iron 40x40x5 mm shall be used for making legs/frame, duly powder coated internally and externally, including provision of Aluminium busbar 200 Amps, MCB TPN 63 Amp- 01 No and MCB TPN 40 Amp - 02 Nos , 50Hz 415 V, indicating lamps LED type-01 set of three and suitable insulators and suitable cable glands of required size as per site requirement for LT Cable entry including provision of Platform of suitable size using PCC 1:2:4 type B1 complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode size 600x600x6.0mm thick burried directly in ground vertically in a pit of depth not less than 2.25 mtr below normal ground level with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanised earth lead 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel and earth wire protected by GI protection pipe light grade 15mm dia connected to main earth wire on pole or control board and GI pipe light grade 20mm bore for watering, funnel with wire mesh, PCC chamber pit in PCC 1:3:6 type C-1, 40 mm thick precast RCC M-30 (design mix) cover reinforced with 8 mm dia TMT bars @ 10 cm C/C on both sides and handle, excavation and earth work in any type of soil and removal upto 50 m complete all as specified and shown in electric plate No.03 of SSR Part-I(2009), connecting to earthing test point all as specified and directed including testing on completion. Note : (i) The unit rate shall include for excavation, earth work in hard/dense soil PCC (1:3:6) type C1 pit, RCC cover slab, GI funnel with 20 mm dia watering pipe, wire mesh, 15mm dia light grade GI protection pipe for earth lead etc., complete. (ii) The unit rate includes for protection pipe and earth lead upto 7.50 meter. (iii) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional height of watering pipe bends elbow etc shall be deemed to be included in the unit rate.

Earthing complete with galvanised steel earth plate electrode size 600x600x6.0mm thick burried directly in ground vertically in a pit of depth not less than 2.25 mtr below normal ground level with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanised earth strip of size 32x6mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel and earth wire protected by GI protection pipe light grade 40mm dia connected to main earth wire on pole or control board and GI pipe light grade 20mm bore for watering, funnel with wire mesh, PCC chamber pit in PCC 1:3:6 type C-1, 40 mm thick precast RCC M-30 (design mix) cover reinforced with 8 mm dia TMT bars @ 10 cm C/C on both sides and handle, excavation and earth work in any type of soil and removal upto 50 m complete all as specified and shown in electric plate No.03 of SSR Part-I(2009), connecting to earthing test point all as specified and directed including testing on completion. Note : The unit rate shall also include for excavation, earth work in hard/dense soil PCC (1:3:6) type C1 pit, RCC cover slab, GI funnel with 20 mm dia watering pipe, wire mesh, 40mm dia light grade GI protection pipe for earth lead etc., complete.

Supply, fabricating, fixing structural mild steel sections such as channel, angle iron, flat iron and brackets etc for fabrications of cross arms, bracings, supports, D-clamps, stiffeners, eye hooks, bolts, pole clamps and back plates including nuts, bolts and washers, welding banding cold , or hot drilling holes for insulators bolts in any shape or size as indicated or directed and inclusive of one red oxide primer coat, one under coat and one finishing coat of aluminium paint complete all as specified and as directed.

Fixing only Security light fitting pressure die cast aluminium housing with heat resistant toughened glass and IP 66 potection of 45 Watt 230 V LED stecurity light fitting complete with LED lights, inbult electronic driver, minimum 4.5KV surge protection with clear acrylic cover accessories prewired and fixing accessories ie complete all as specified and as directed by Engr- in- Charge. NOTE: LED Security light will be provided by department.

Fixing only LED Flood light luminaries 120 watt 230 volt energy saving environmental friendly, long life exclusive of innovative die-cast aluminium IP 66 flood light, suitable for high lighting architectural facade including suitable fixing arrangement for fixing with the existing pole/building as per requirement. NOTE: LED flood light will be provided by department.

Fixing only bollard light, 7watt new generation, 360° fitting, energy saving, environmental friendly IP65 designed aluminium land scape lumina for diffused lighting with high power LED as light sourceries with all accessories fixed on PCC foundation with cable intlet and outlet pipe complete all as specified and as directed. NOTE: (i) LED Street light will be provided by department. (ii) PCC foundation shall be measured and paid separately.

Supply and fixing polycarbonate street light junction boxes IP 66/67 weather proof (white colour) suitable for outdoor installation having minimum size 225mm x 295mm x 122mm including suitable cable connecting terminals, cable lugs etc for mounting MCB for operating the streetlight fittings, suitable cable glands as per site requirement complete all as specified and as directed. Make: Cat Part No KF 3500 B of Hensel/Sintex. Note: MCB shall be measured and paid separately.

Supply and fix MCB single pole, 6 to 32 Amp 240 volt C curve 10 KA repturing capacity complete all as specified and as directed.

Laying only LT XLPE insulated, galvanised steel strip or wire armoured electric power cable (heavy duty) with stranded aluminium conductor 1100 Volts grade 10 sqmm, 2 core with all required clamps etc. along the wall/in trenches complete all as specified and as directed. NOTE: XLPE cable will be provided by the department at site.

ELSOL ENGINEERS

WELTRONENGINEERINGSERVICES

Sreema Enterprises