S,I,T,C of UPS systems for Forest Cameras near SLNS temple and Stabilizers to Aswini hospital in ESD-South,Tirumala

Supply installation Testing and commissioning of .3.0 KVA, 72/96 VDC with Isolation Transformer on line UPS system confirms to IS 16242(Part-I):2014 and IEC 60240-1: 2008 with IGBT technology pure sine wave output, double conversion with auto and manual static by pass switch single phase input / Single phase output. Makes: Numeric/APC/Fuji Electric/ Sakshham /Emerson/Techser

Supply and fixing of 12V 42 AH SMF battery with 3 years warranty including wire leads, connections etc complete. Makes: Quanta / Racket / Exide

Supply and providing of battery rack for 5 to 10 batteries (42 AH)

Providing of Independent Earthing with 40mm Dia GI Pipe 'B' class of 1.5 Mtrs length after excavating an earth pit of size1.2 m X 0.9 m X 1.55 m with the following specification: (a) the GI pipe shall be inserted into the Ground for 1.75 Mtr below the inspection chamber bottom 300 mm all around This pipe shall be covered with the mixture of 40 Kgs of coke, 20 Kgs of salt & sand including necessary earth work excavation in all kind of soils. (b) The excavated gap shall be back filled with excavated earth, and shall be properly consolidated with water.

(c) The top 0.25 m of GI pipe shall be exposed into inspection chamber of Hum pipe . The all around inspection chamber shall be providied with 18" dia hume pipe. Earth connections shall be given to the 25 X 6 mm GI flat with bolts, nuts & washers, (d) A 65 mm dia PVC conduit is to be embeded through hume pipe at one side, to lay the Earth from the Earth bus to the Electrode through the PVC conduit and after laying the Earth, the pit entry PVC conduit is to be sealed with Bitumen compound. (e) Necessary Meggar testing is to be done in the presence of the concerned Engineers, and the reading should be as per IE standards.

Supply and run of 25 mm X 3 mm G.I Strip for earth electrode to required places by concealing in walls, flooring by cutting the grooves and replastering neatly and giving necessary connection with 3/8"x2" GI Bolts, Nuts and Washers wherever joints has to be done. The strip has to be either riveted (or) bolted (or) gas welding neatly and all labour charges etc., complete.

Supply and Fixing of ISI Mark 20mm outer dia medium grade (1.55mm thickness) with IS:9537 part -3 P.V.C. pipe with all accessories fixing on chromium plated metallic base saddles for surface wiring on Brick / stone walls, RCC roofings,Trusses, channels including all labour charges etc., complete. (If PVC Pipes are fixed on Trusses/Channels with MS Clamps, the rate for MS Clamps will be paid Separately) Makes: Sudhakar / Finolex / Polycab / Kumar / AKG / Indian-tubes / GM / Anchor / Nandi / Polyline / Gold Medal

Supply and wiring with 2 run of 14/0.3mm (1.0 sq.mm) PVC insulated FRLS flexible copper cable (ISI MARK) as per IS:694 / 1990 specification in existing PVC pipes / casing & caping with pilot ceiling rose, 6 Amp 1 Way Module Modular switch to switch control box including all labour charges etc., complete for Light, bell, fan and Exhaust fan points in Residential Buildings. Grade-A: Wire Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI Grade-B: Modular Switch Makes: Legrand Myrius /Crabtree Thames Platinum / Anchor Roma / Clipsal / Havells Coral or Fabio / Goldmedal (Curve/Air) / Schneider Livia / C&S / L&T / HPL / GM (GNINE) / Kolars / Indo asian

Supply and run of 3 wire of 36/0.3mm (2.5 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete. Grade-A: Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI

Supply and fixing of 8 WayTP & N Horizontal type Distribution board as per IS 8623; IS 13032; IEC 61439-3 with IP-43 protection (Metal door) firmly on the surface of the wall etc., complete. Grade-A: Make: Legrand (Ekinox 3) / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T-Newrang / Indoasian (Opti Pro)

Supply and fixing of 40 to 63 Amp SPN/DP MCBs 10 KA breaking capacity 'C'/ 'D' Curve ISI Mark as per IS:60898-1:2002 in the existing board and giving necessary connections. Grade-A: Makes: Legrand DX3 / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).

Supply and fixing of RCCB Up to 40A Double Pole, 30mA for earth leakage protection, confirms to IEC:61008 and IS:12640-1 in the existing boards including internal connections and Labour charges etc., complete. Grade-A: Makes: Legrand DPX3 / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).

Supply and fixing of universal mounting metal plug board and socket suitable for D.P. RCCBs including labour charges for surface mounting. Grade-A: Makes: Legrand (ekinox3) / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).

Supply and fixing of 12/16 module plastic surface box with modular cover plate with frame on to the wall with all required accessories and all labour charges etc., complete. Make: Legrand Arteor / Legrand Mosaic / North west / M.K / G.M / L&T.

Supply and fixing of 6 Module box surface mounting PVC Module box in wall with all required accessories, all labour charges etc., complete. Make: Legrand / North west / M.K / G.M / L&T / Legrand Arteor GM four-five / Schneider / Anchor / Clipasal / Havells / ABB / Indo Asian / Siemen / Fortune Art.

Supply and fixing of 16 /20 Amps 1 Way 1 Module Modular Switch on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete. Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree - Murano - Amare - Ducor / GM Four-Five

Supply and fixing of 16 / 6 Amps 1 Way Combined 2 Module Modular Socket with Shutter on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete. Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree - Murano - Amare - Ducor / GM Four-Five

Supply and Fixing of T5, 18W LED Batten type fitting with Internal driver with Polycarbonate Material suitable to operate on 230V AC, 50 Hz power supply as per following specification. Make: Philips / Osram / Havells / Crompton Greaves / GE / Orkus

Technical Specifications: Electrical parameter Specification 1) Input power (W) : 18 ±5% 2) Input Voltage (V) : 230 ±5% 3) Power factor : >0.95 4) THD % : <15% 5) Output Voltage (with load) Vdc : 60 to 80 V DC 6) Output Current (mA) dc : 225 ±5% 7) Driver Efficiency (%) : ≥ 90% 8) Operating Voltage : 140 - 270 VAC 9) Operating Frequency(HZ) : 50 ± 3 Hz 10) Output open circuit protection : YES 11) Output short circuit protection : YES 12) Surge Protection : ≥ 2.5 kV

Optical Specification ) LED make: NICHIA (Japan)/OSRAM (German)/PHILIPS LIMITED/ CREE (USA) /BRIDGELUX(USA) /SEOL / LEDNIM /EVERLIGHT / LED / EPISTAR / EDISON 2)Luminous Flux (Lumen) : 1800 ±5% 3)Luminous Efficiency (LM/W) : 100 ±5% 4) Colour Temperature (K) : 5500K to 6500K 5) CRI : ≥ 80 6) LED Beam Angle (Degree) : >150 Degree

Environmental: 1) Working Temperature Range : 0 to 40 degree C (Degree centigrade) 2) Working Humidity Range : 0 - 95% Mechanical : 1) IP Grade : IP20 2) Base : NA 3) Housing : PC 4) diffuser : PC Warranty : 5 Years

Supply of 48" (1200 mm ) sweep 5 star rated BLDC ( Brush less Direct current) ceiling fan with double bar barings, input voltage 230V AC converted to 24V DC Power input not more than 32W air delivery 210/220 cubic meter/min with remote and without Regulator Make: Atomberg( Gorilla GV2)/ Halonix(Plasma) / Havells (Efficiential) and TTD approved brands

Supply and fixing of 100 W Fan Step Regulator of 2 Module on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete. Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree - Murano - Amare - Ducor / GM Four-Five

Supply and fixing of Rawal fan hook in the ceiling and repacking the same with M.Seal for ceiling fans etc., complete.

Fixing of Ceiling fan including transportation and giving connections with twin core wire etc., complete.

Supply of ………... Voltage Surge Protector, confirms to IEC/EN 61643-11. Makes: Legrand / Siemens / G.E / Lauritz Knudsen (formerly L&T) /Hager/Havells

4 Pole 4 Module 40 KA, 1.4 KV

Supply of …5 KVA 1-phase, automatic Electronic Voltage Stabilizer. Makes: Makes: V-Guard / Real Guard / Uni Stab / ITL.

Supply and fixing of 100 Amp 415V F.P. Changeover switch (Off load ) as per IS:13947 in sheet steel enclosure with all accessories etc., complete on existing T.W.Board & walls etc. Grade-A: Makes: HPL / Havells / Standard / Indo Asian / C&S

Supply and transportation of 16 Sq.mm 4 core LT XLPE insulated, 1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) / 1554-1. Grade-A: Make: Torent / Universal / Unistar / Havells / KEI / Gloster / Polycab / RR Kabel / Finolex.

Laying of U.G cables upto 50 Sq.mm and back filling of trench including labour charges etc., complete.

Supply and fixing of fabricated M.S clamps made out of 25mm x 3mm MS flat with necessary holes on either side with 1 1/2" coach screws and painting 2 coats of enamel black paint over one coat of red oxide suitable for fixing of UG Cables of size 10 Sq.mm to 16 Sq.mm on walls etc. including all labour charges etc., complete.

Supply and fixing of 205 X 255 X 112mm Sizes thermo plastic cable junction boxes with IP66/67 weather proof, for outdoor installation with konckouts for cable entry including 1 No. 6 to 32A SP MCB & terminals etc., complete (sizes in mm) Make : Hensel / Sadhrish / Sintex

Supply Laying and Transportation of Outer dia 50mm and inner dia 38mm, 6Kg/Sq.Cm (PE- 100 grade) double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II. Make: DURA LINE (Dura Guard) or its equivalent make.

Earth Work excavation for trench for laying of U.G. Cable in ordinary Soils, manual means to the required width and depth and depositing the same on bank as directed during execution etc., complete .

Cement concrete using 20mm HBG metal in CC (1:3:6) laid in Layers of not more than 15cms thick well compacted including curing cost and conveyance of materials etc., complete

Supply of 50 mm dia G.I. pipes of "B" class of ISI marked and approved by the department including cost and conveyance and all other incidental charges etc., and properties and weight as per IS 1239 marked . Make: Jindal / Appollo / TATA.

Supply, Fabrication and fixing of Single stem Pole socket fabricated with M.S. 'C' Class Pipe of 5" (125mm) dia 1/4" thick, 1' 6" Long inserted with 4" (100mm) dia 1/4" thick, 5" long M.S. 'C' Class Pipe at the top completely and welded 1 1/2" dia 'C' Class M.S.Pipe of not less than 0.6 mtr. for stem (but for extra pipe beyond 0.6 mtr., payment will be made separately). The stem pipe is to be inserted in the socket with suitable length and welded at 0° to 20° (90° to 110° to the Pole) with the support of 3" x 3/8" M.S. Flat at bottom of stem including cost of M.S.Pipe and 14 SWG MS sheet of suitable size is to be welded on the top of the socket. One run of 2.5 Sq mm 3 core flat Copper Cable to be provided from the MS box to the given lamp fitting at the top of the pole and the work includes fixing of given lamp fitting. An M.S. Box of size 12" x 8" x 6" with screwing/ hinges arrangement with door (consisting hylum sheet, 16A Fuse unit, 4 nos of Brass bolts, nuts and washers) has to be fixed to the pole above the pole coping with necessary back clamps (1" x 18 " M.S flat) as directed during execution. Two coats of enamel paint over one coat of red oxide paint is to be painted to the Socket and stem.

Plastering in CM (1:6) with 12mm thick using river sand including curing, conveyance of materials etc.,

Supply of 120W LED Day light integral IP66 street light/ road light fitting with pressure diecast aluminium body suitable for mounting to the existing poles with 40mm to 60mm outer dia bracket (Adjustable stem pipe) with suitable capacity of isolation constant current driver. The luminaire shall be with lense for distribution of lighting and suitable to operate on 230V, 50Hz AC supply with the following specification. Makes: Makes: Phillips/ Crompton Greaves/ Wipro/ K-Lite Halonix / ORKUS / Havells. .

i.) Output Luminous Flux of LED luminaire : 12000 Lumens, + 5% Tolerance ii. ) Material for glass: Toughned glass. iii.) Material for LED engine : Metal core PCB. iv) Working life : >50,000 Hrs at 35oC ambient temperature with 70% lumen output. v) Make of LED used: NICHIA(Japan)/ Osram(German) / Philips Lumiled / CREE (USA)/ Bridgelux(USA)/ Seol/ Lendnim. vi) LED life : >50,000Hrs with 70% of Lumens output. vii) LED efficiency: >135/lm/w viii) Luminaire efficiency : 100 Lumens / watts +5% ix) Total system wattage including loss: 120 Watts x) Correlated colour temperature: 5500K -6500K

xi) Colour Rendering index: >70(LM80/ IS16106) xii) Input voltage and Frequency range: 230V - 240V AC, 50Hz +/-3Hz. xiii) Operative voltage: 120/140V - 270V AC universal Electronic Driver. xiv) Power factor : >0.95 (LM79/IS16105-2012 xv) Driver efficiency, Driver should be easily detachable & replacable : Driver efficiency (Constract current driver with isolation xvi) Total Hormonic Distortion(THD) : <10%. xvii) Conformity with IP-66 for Luminaire.

Fixing of given Flood Light / Halogen fitting on wall / beams etc.,with 10mm x 75mm Anchor fasteners including all labour charges and giving connections etc., complete.

NOTE (i)The rates are of basic rates excluding GST. (ii) The applicable GST will be reimbursed/paid as per actuals on production of proof. (iii)Statutory deductions will be made as per norms, if applicable. Any modalities imposed on GST by the Government from time to time, the same will be implemented.

Supply installation Testing and commissioning of .3.0 KVA, 72/96 VDC with Isolation Transformer on line UPS system confirms to IS 16242(Part-I):2014 and IEC 60240-1: 2008 with IGBT technology pure sine wave output, double conversion with auto and manual static by pass switch single phase input / Single phase output. Makes: Numeric/APC/Fuji Electric/ Sakshham /Emerson/Techser

Supply and fixing of 12V 42 AH SMF battery with 3 years warranty including wire leads, connections etc complete. Makes: Quanta / Racket / Exide

Supply and providing of battery rack for 5 to 10 batteries (42 AH)

Providing of Independent Earthing with 40mm Dia GI Pipe 'B' class of 1.5 Mtrs length after excavating an earth pit of size1.2 m X 0.9 m X 1.55 m with the following specification: (a) the GI pipe shall be inserted into the Ground for 1.75 Mtr below the inspection chamber bottom 300 mm all around This pipe shall be covered with the mixture of 40 Kgs of coke, 20 Kgs of salt & sand including necessary earth work excavation in all kind of soils. (b) The excavated gap shall be back filled with excavated earth, and shall be properly consolidated with water.

(c) The top 0.25 m of GI pipe shall be exposed into inspection chamber of Hum pipe . The all around inspection chamber shall be providied with 18" dia hume pipe. Earth connections shall be given to the 25 X 6 mm GI flat with bolts, nuts & washers, (d) A 65 mm dia PVC conduit is to be embeded through hume pipe at one side, to lay the Earth from the Earth bus to the Electrode through the PVC conduit and after laying the Earth, the pit entry PVC conduit is to be sealed with Bitumen compound. (e) Necessary Meggar testing is to be done in the presence of the concerned Engineers, and the reading should be as per IE standards.

Supply and run of 25 mm X 3 mm G.I Strip for earth electrode to required places by concealing in walls, flooring by cutting the grooves and replastering neatly and giving necessary connection with 3/8"x2" GI Bolts, Nuts and Washers wherever joints has to be done. The strip has to be either riveted (or) bolted (or) gas welding neatly and all labour charges etc., complete.

Supply and Fixing of ISI Mark 20mm outer dia medium grade (1.55mm thickness) with IS:9537 part -3 P.V.C. pipe with all accessories fixing on chromium plated metallic base saddles for surface wiring on Brick / stone walls, RCC roofings,Trusses, channels including all labour charges etc., complete. (If PVC Pipes are fixed on Trusses/Channels with MS Clamps, the rate for MS Clamps will be paid Separately) Makes: Sudhakar / Finolex / Polycab / Kumar / AKG / Indian-tubes / GM / Anchor / Nandi / Polyline / Gold Medal

Supply and wiring with 2 run of 14/0.3mm (1.0 sq.mm) PVC insulated FRLS flexible copper cable (ISI MARK) as per IS:694 / 1990 specification in existing PVC pipes / casing & caping with pilot ceiling rose, 6 Amp 1 Way Module Modular switch to switch control box including all labour charges etc., complete for Light, bell, fan and Exhaust fan points in Residential Buildings. Grade-A: Wire Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI Grade-B: Modular Switch Makes: Legrand Myrius /Crabtree Thames Platinum / Anchor Roma / Clipsal / Havells Coral or Fabio / Goldmedal (Curve/Air) / Schneider Livia / C&S / L&T / HPL / GM (GNINE) / Kolars / Indo asian

Supply and run of 3 wire of 36/0.3mm (2.5 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete. Grade-A: Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI

Supply and fixing of 8 WayTP & N Horizontal type Distribution board as per IS 8623; IS 13032; IEC 61439-3 with IP-43 protection (Metal door) firmly on the surface of the wall etc., complete. Grade-A: Make: Legrand (Ekinox 3) / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T-Newrang / Indoasian (Opti Pro)

Supply and fixing of 40 to 63 Amp SPN/DP MCBs 10 KA breaking capacity 'C'/ 'D' Curve ISI Mark as per IS:60898-1:2002 in the existing board and giving necessary connections. Grade-A: Makes: Legrand DX3 / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).

Supply and fixing of RCCB Up to 40A Double Pole, 30mA for earth leakage protection, confirms to IEC:61008 and IS:12640-1 in the existing boards including internal connections and Labour charges etc., complete. Grade-A: Makes: Legrand DPX3 / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).

Supply and fixing of universal mounting metal plug board and socket suitable for D.P. RCCBs including labour charges for surface mounting. Grade-A: Makes: Legrand (ekinox3) / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).

Supply and fixing of 12/16 module plastic surface box with modular cover plate with frame on to the wall with all required accessories and all labour charges etc., complete. Make: Legrand Arteor / Legrand Mosaic / North west / M.K / G.M / L&T.

Supply and fixing of 6 Module box surface mounting PVC Module box in wall with all required accessories, all labour charges etc., complete. Make: Legrand / North west / M.K / G.M / L&T / Legrand Arteor GM four-five / Schneider / Anchor / Clipasal / Havells / ABB / Indo Asian / Siemen / Fortune Art.

Supply and fixing of 16 /20 Amps 1 Way 1 Module Modular Switch on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete. Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree - Murano - Amare - Ducor / GM Four-Five

Supply and fixing of 16 / 6 Amps 1 Way Combined 2 Module Modular Socket with Shutter on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete. Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree - Murano - Amare - Ducor / GM Four-Five

Supply and Fixing of T5, 18W LED Batten type fitting with Internal driver with Polycarbonate Material suitable to operate on 230V AC, 50 Hz power supply as per following specification. Make: Philips / Osram / Havells / Crompton Greaves / GE / Orkus

Technical Specifications: Electrical parameter Specification 1) Input power (W) : 18 ±5% 2) Input Voltage (V) : 230 ±5% 3) Power factor : >0.95 4) THD % : <15% 5) Output Voltage (with load) Vdc : 60 to 80 V DC 6) Output Current (mA) dc : 225 ±5% 7) Driver Efficiency (%) : ≥ 90% 8) Operating Voltage : 140 - 270 VAC 9) Operating Frequency(HZ) : 50 ± 3 Hz 10) Output open circuit protection : YES 11) Output short circuit protection : YES 12) Surge Protection : ≥ 2.5 kV

Optical Specification ) LED make: NICHIA (Japan)/OSRAM (German)/PHILIPS LIMITED/ CREE (USA) /BRIDGELUX(USA) /SEOL / LEDNIM /EVERLIGHT / LED / EPISTAR / EDISON 2)Luminous Flux (Lumen) : 1800 ±5% 3)Luminous Efficiency (LM/W) : 100 ±5% 4) Colour Temperature (K) : 5500K to 6500K 5) CRI : ≥ 80 6) LED Beam Angle (Degree) : >150 Degree

Environmental: 1) Working Temperature Range : 0 to 40 degree C (Degree centigrade) 2) Working Humidity Range : 0 - 95% Mechanical : 1) IP Grade : IP20 2) Base : NA 3) Housing : PC 4) diffuser : PC Warranty : 5 Years

Supply of 48" (1200 mm ) sweep 5 star rated BLDC ( Brush less Direct current) ceiling fan with double bar barings, input voltage 230V AC converted to 24V DC Power input not more than 32W air delivery 210/220 cubic meter/min with remote and without Regulator Make: Atomberg( Gorilla GV2)/ Halonix(Plasma) / Havells (Efficiential) and TTD approved brands

Supply and fixing of 100 W Fan Step Regulator of 2 Module on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete. Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree - Murano - Amare - Ducor / GM Four-Five

Supply and fixing of Rawal fan hook in the ceiling and repacking the same with M.Seal for ceiling fans etc., complete.

Fixing of Ceiling fan including transportation and giving connections with twin core wire etc., complete.

Supply of ………... Voltage Surge Protector, confirms to IEC/EN 61643-11. Makes: Legrand / Siemens / G.E / Lauritz Knudsen (formerly L&T) /Hager/Havells

4 Pole 4 Module 40 KA, 1.4 KV

Supply of …5 KVA 1-phase, automatic Electronic Voltage Stabilizer. Makes: Makes: V-Guard / Real Guard / Uni Stab / ITL.

Supply and fixing of 100 Amp 415V F.P. Changeover switch (Off load ) as per IS:13947 in sheet steel enclosure with all accessories etc., complete on existing T.W.Board & walls etc. Grade-A: Makes: HPL / Havells / Standard / Indo Asian / C&S

Supply and transportation of 16 Sq.mm 4 core LT XLPE insulated, 1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) / 1554-1. Grade-A: Make: Torent / Universal / Unistar / Havells / KEI / Gloster / Polycab / RR Kabel / Finolex.

Laying of U.G cables upto 50 Sq.mm and back filling of trench including labour charges etc., complete.

Supply and fixing of fabricated M.S clamps made out of 25mm x 3mm MS flat with necessary holes on either side with 1 1/2" coach screws and painting 2 coats of enamel black paint over one coat of red oxide suitable for fixing of UG Cables of size 10 Sq.mm to 16 Sq.mm on walls etc. including all labour charges etc., complete.

Supply and fixing of 205 X 255 X 112mm Sizes thermo plastic cable junction boxes with IP66/67 weather proof, for outdoor installation with konckouts for cable entry including 1 No. 6 to 32A SP MCB & terminals etc., complete (sizes in mm) Make : Hensel / Sadhrish / Sintex

Supply Laying and Transportation of Outer dia 50mm and inner dia 38mm, 6Kg/Sq.Cm (PE- 100 grade) double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II. Make: DURA LINE (Dura Guard) or its equivalent make.

Earth Work excavation for trench for laying of U.G. Cable in ordinary Soils, manual means to the required width and depth and depositing the same on bank as directed during execution etc., complete .

Cement concrete using 20mm HBG metal in CC (1:3:6) laid in Layers of not more than 15cms thick well compacted including curing cost and conveyance of materials etc., complete

Supply of 50 mm dia G.I. pipes of "B" class of ISI marked and approved by the department including cost and conveyance and all other incidental charges etc., and properties and weight as per IS 1239 marked . Make: Jindal / Appollo / TATA.

Supply, Fabrication and fixing of Single stem Pole socket fabricated with M.S. 'C' Class Pipe of 5" (125mm) dia 1/4" thick, 1' 6" Long inserted with 4" (100mm) dia 1/4" thick, 5" long M.S. 'C' Class Pipe at the top completely and welded 1 1/2" dia 'C' Class M.S.Pipe of not less than 0.6 mtr. for stem (but for extra pipe beyond 0.6 mtr., payment will be made separately). The stem pipe is to be inserted in the socket with suitable length and welded at 0° to 20° (90° to 110° to the Pole) with the support of 3" x 3/8" M.S. Flat at bottom of stem including cost of M.S.Pipe and 14 SWG MS sheet of suitable size is to be welded on the top of the socket. One run of 2.5 Sq mm 3 core flat Copper Cable to be provided from the MS box to the given lamp fitting at the top of the pole and the work includes fixing of given lamp fitting. An M.S. Box of size 12" x 8" x 6" with screwing/ hinges arrangement with door (consisting hylum sheet, 16A Fuse unit, 4 nos of Brass bolts, nuts and washers) has to be fixed to the pole above the pole coping with necessary back clamps (1" x 18 " M.S flat) as directed during execution. Two coats of enamel paint over one coat of red oxide paint is to be painted to the Socket and stem.

Plastering in CM (1:6) with 12mm thick using river sand including curing, conveyance of materials etc.,

Supply of 120W LED Day light integral IP66 street light/ road light fitting with pressure diecast aluminium body suitable for mounting to the existing poles with 40mm to 60mm outer dia bracket (Adjustable stem pipe) with suitable capacity of isolation constant current driver. The luminaire shall be with lense for distribution of lighting and suitable to operate on 230V, 50Hz AC supply with the following specification. Makes: Makes: Phillips/ Crompton Greaves/ Wipro/ K-Lite Halonix / ORKUS / Havells. .

i.) Output Luminous Flux of LED luminaire : 12000 Lumens, + 5% Tolerance ii. ) Material for glass: Toughned glass. iii.) Material for LED engine : Metal core PCB. iv) Working life : >50,000 Hrs at 35oC ambient temperature with 70% lumen output. v) Make of LED used: NICHIA(Japan)/ Osram(German) / Philips Lumiled / CREE (USA)/ Bridgelux(USA)/ Seol/ Lendnim. vi) LED life : >50,000Hrs with 70% of Lumens output. vii) LED efficiency: >135/lm/w viii) Luminaire efficiency : 100 Lumens / watts +5% ix) Total system wattage including loss: 120 Watts x) Correlated colour temperature: 5500K -6500K

xi) Colour Rendering index: >70(LM80/ IS16106) xii) Input voltage and Frequency range: 230V - 240V AC, 50Hz +/-3Hz. xiii) Operative voltage: 120/140V - 270V AC universal Electronic Driver. xiv) Power factor : >0.95 (LM79/IS16105-2012 xv) Driver efficiency, Driver should be easily detachable & replacable : Driver efficiency (Constract current driver with isolation xvi) Total Hormonic Distortion(THD) : <10%. xvii) Conformity with IP-66 for Luminaire.

Fixing of given Flood Light / Halogen fitting on wall / beams etc.,with 10mm x 75mm Anchor fasteners including all labour charges and giving connections etc., complete.

NOTE (i)The rates are of basic rates excluding GST. (ii) The applicable GST will be reimbursed/paid as per actuals on production of proof. (iii)Statutory deductions will be made as per norms, if applicable. Any modalities imposed on GST by the Government from time to time, the same will be implemented.

(Rupees Four Lakhs Three Thousands Seven Hundred Eighty and paise Thirty Six Only)