REPAIRING AND RENOVATION OF VARIOUS OLD UG-PG BOYS HOSTEL BUILDING FOR AGRICULTURE & AGRICULTURE ENGINEERING AT J.A.U., JUNAGADH (THIRD ATTEMPT)

Sr. DESCRIPTION OF ITEM Qty. Rate Per Amount

1 Providing and filling in foundation and plinth 160.00 289.06 Cmt

with murrum or selected soil in layer of 20cms

in thickness incl. dressing watering and

consolidating each deposited layer by ramming

in true line and level etc complete as directed

by Engineer in charge

2 Providing and laying cement concrete 1:3:6 mix 100.00 3005.76 Cmt

( 1 cement :3 coarse sand: 6 graded stone agg.

of 20 mm nominal size B.T. kapchi)for

foundation & plinth laid in true line and level

incld. Compacting & curing etc. but excluding

the cost of form work etc. complete as directed

by Engineer in-charge

3 Providing & laying Ordinary Cement, Concrete 80.00 4412.71 Cmt

1:2:4(1 cement 2 coarse sand 4 graded stone

agg. of 20mm nominal size B.T. kapchi) for

R.C.C. Flooring including necessary shuttering,

centering, formwork, concrete machine mixed,

compaction with vibrators. in true line and level,

finishing with C.M. (1:2) with cement slurry and

curing etc. complete but excluding cost of

reinforcement etc comp as directed by E.I.C.

4 Providing , laying & casting ordinary cement 120.00 6430.28 Cmt

concrete 1:1.5:3 mix ( 1 cement : 1.5 coarse

sand: 3 graded stone aggregate 20mm nominal

size of B.T. Kapchi ) for R.C.C Ground Beam /

Plinth Beam etc including formwork centering

shuttering scaffolding compacting with vibrators

etc complete incld. Finishing the exposed face

even and smooth with C.M. 1:3 ( 1 cement :

sand) but excluding the cost of reinforcement

as directed by Engineer in charge

5 Providing, laying and casting ordinary cement 24.00 8974.40 Cmt

concrete 1:1.5:3 mix ( 1 cement : 1.5 coarse

sand: 3 graded stone aggregate 20mm nominal

size of B.T. Kapchi ) for R.C.C. column having

any cross section area for super structure for

Ground floor up to floor two level laid in true

line and level including the cost of form work

,compacting by vibrators , curing et c including

finishing the exposed faces even and smooth

with C.M. 1:3 ( 1 cement : 3 sand ) but

excluding the cost of reinforcement etc

complete as directed by Engineer in charge

For Ground floor

6 Providing and laying ordinary cement concrete 14.00 8504.44 Cmt

1:1.5:3 mix ( 1 cement : 1.5 coarse sand:

graded stone aggregate 20mm nominal size)

For R.C.C Lintel For Ground floor in true line

and level up to two level including finishing

smooth exposed face in C.M. 1:3 ( 1 cement :

3 sand) smooth curing compacting with

vibrators etc. complete including the cost of

form work scaffolding shuttering but the

excluding the cost of reinforcement etc

complete as directed by Engineer in charge

For Ground floor

7 Providing & Laying Ordinary Cement, 1.00 6943.86 Cmt

Concrete1:1.5:3 mix ( 1 cement : 1.5 coarse

sand: 3 graded stone aggregate 20mm nominal

size B.T. kapchi) for R.C.C. chajjas For Ground

floor not exceeding 10 M.M. thickness in true

line level including necessary shuttering

centering formwork , concrete machine mixed

,Compaction with vibrators. in true line and

level including necessary exposed surface

smooth Plastering with C.M. (1:3) and curing

etc. complete but excluding cost of

reinforcement as directed by E.I.C.

For Ground Floor

8A Providing, laying & constructing in true line & 230.00 6198.05 Cmt

level white stone bela masonry block in course

in & above plinth level super structure with

stone of approved quality in cement mortar 1:5

( 1 cement : 5 coarse sand ) in true line and

level including racking out joints, curing

,scaffolding etc complete as directed by

Engineer in-charge For Ground floor

8B For First floor 60.00 6466.35 Cmt

9 Providing, laying & constructing in true line & 50.00 652.36 Smt

level white stone bela masonry block in

partition wall up to 15 cm thickness in super

structure with stone of approved quality in

cement mortar 1:4 ( 1 cement : 4 coarse sand )

in true line and level including racking out

joints, curing ,scaffolding as per detail design

drawing given etc. comp.as directed by E.I.C

10 Providing, laying & casting in true line & Level 60.00 6969.99 Cmt

cement concrete 1:1.5:3 mix ( 1 cement :

coarse sand: 3 graded stone aggregate 20mm

nominal size of B.T. Kapchi ) for R.C.C. Beam

having any cross section area for super

structure of ground floor up to floor two level

including the cost of form work , centering

shuttering compacting with vibrators , curing

etc complete including, finishing the exposed

face even and smooth with C.M. 1:3 ( 1 cement

: 3 sand) but excluding the cost of

reinforcement etc complete as directed by

Engineer in-charge For Ground floor

11 P/L Ordinary Cement, Concrete 1:1.5:3 mix ( 1 4.00 14316.92 Cmt

cement : 1.5 coarse sand: 3 graded stone

aggregate 20mm nominal size B.T. kapchi) for

R.C.C. work in horizontal or vertical fins Super

structure including necessary formwork mixing

with machine Compaction with vibrators. in

true line and level finishing exposed surface

smooth finishing with C.M. (1:3) and curing

etc. complete but excluding cost of

reinforcement etc complete as directed by

E.I.C. For Ground floor

12 Providing and laying ordinary cement concrete 90.00 7280.07 Cmt

1:1.5:3 mix (1 cement: 1.5 coarse sand:

graded stone aggregate 20mm nominal size of

B.T. Kapchi) For R.C.C Slab any thick for super

structure including finishing in C.M. 1:3 (

cement : 3 sand) smooth with neat cement

slurry, curing ,Form work but excluding the cost

of reinforcement etc complete as directed by

Engineer in-Charge. For Ground floor

13 Providing, laying & casting ordinary cement 3.00 7467.61 Cmt

concrete 1:1:5:3 mix ( 1 cement : 1.5 coarse

sand: 3 graded stone aggregate 20mm nominal

size of B.T. Kapchi )for R.C.C Stair case

having waist slab in true line & level mixing

with machine Compaction with Vibrator, incl.

form work , finishing smooth with C.M. 1:3 neat

cement slurry, Curing as Per Drawing and

directed by Engineer in charge

For Ground floor

14 Providing and laying twisted T.M.T. bar of ISI 34540.00 76.21 Kg

make reinforcement for R.C.C work for ground

floor up to floor three level including cleaning

,straightening , cutting , bending , binding with

16 gauge annealed wire and placing in position

as per detail drawing and structure design etc.

complete as directed by Engineer in-charge

15 Providing and laying Vitrified tiles 8mm thick in 320.00 1204.20 Smt

flooring, treads of steps laid on a bed of 20mm

thick base of C.M. 1:6 (1 cement; 6 sand) laid

in true line level and slope jointed with white

cement, colour pigment, adhesive solution

including curing rubbing polishing etc. comp.

As directed by Engineer in-charge

16 Providing and laying color Ceramic ties in 40.00 857.42 Smt

flooring, trends of steps landing of 25mm thick

bed average thickness of C.M. 1:2 laid in true

line and level jointed with neat cement slurry

mixed with pigment to match the shade of the

tiles of incl. rubbing and polishing etc. comp.

as directed by Engineer in-charge

17 Providing laying &fixing 25mm thick polished 320.00 971.95 Smt

kotah stone slab flooring over 20mm(average)

thick base of cement mortar 1:6 (1 cement :

coarse sand) laid in true line &level and slope

including jointed with gray cement slurry

including curing rubbing and polishing etc

complete as directed by Engineer in charge

18 Providing and laying color Ceramic ties in 200.00 1038.39 Smt

skirting and risers of steps in height on 10mm

thick cement plaster C.M. 1:3 (1 cement :

sand) laid in true line and level jointed with

neat cement slurry mixed with pigment to

match the shade of the tiles of incl. rubbing

and polishing etc. comp. as directed by

Engineer in-charge

19 P/L and fixing 25mm Polish kotah stone slab in 50.00 1056.26 Smt

risers steps dado and pillars laid in 10mm th.

Cement mortar 1:3 ( 1 cement :3 sand) laid in

true line level and slope & jointed with grey

neat cement slurry including curing rubbing &

polishing etc complete as directed by Engineer

20 Providing and fixing 30mm thick Machine 50.00 5139.29 Smt

Press Water proof Flush shutter for door make

of SOHAM, VALORA, JEDIX, OMEN,

UMAVANSHI or Equivalent make with

laminated sheet 0.80mm on Both side with Pre

stress cement Concrete frame of 250 x

mm size of approved quality including

Periphery teak wood beading of 12 mm thick,

Shutter with S.S. screw in level with I-Twenty

make Stainless Steel fixitures &fastening and

one coat of primer and two coats of oil paint on

periphery side etc complete as directed by

Engineer in charge

21 Providing and fixing Precast R.C.C. door frame 9.00 1000.00 Nos

of size 100x 75 mm fixing on wall surface with

hold fast, necessary Cement Plaster in C.M.1:2

finish smooth etc complete as directed by

Engineer in-charge

22 Providing and fixing 25mm thick form PVC 13.00 3401.43 Smt

shutter door of DECORA or Equivalent make

including Shutter with S.S. scrow in level with I-

twenty make stainless fixatres & fastening etc

complete as directed by Engineer in charge

23 Providing and fixing Jindal aluminum colour 4.00 5908.18 Smt

anodize pipe main frame 20072-

6350x38.10(weight kg/m 1.095), door vertical

19572-85x44.45 (weight kg/m 1.0301), door

bottom & top 19519- 100x44.45(weight kg/m

1.921), door middle 19525- 83x44.45(weight

kg/m 1.679) Glazing clip 15352-

17.30x19(weight kg/m 0.097), 5mm ASAI grey

glass, white virgin glass rubber, door vertical

rubber, 100mm bras piot, 150mm door handle,

door lock, door closer, screw, grip, with labour

(85mm Aluminium Section Door)

24 Providing and Fixing ¾ Jindal aluminum colour 50.00 3735.50 Smt

anodize 2, track sliding window 2 track frame

31.75x61.85, bottom 20956 (weight kg/m

0.621) 2 track top 20966 (weight kg/m 0.547) –

shuttar section – 20605 (weight kg/m 0.469)-

20606 (weight kg/m 0.417) – 20604(weight

kg/m 0.417), 4mm thick ASAI woolpie, window

roller MS metal long body Teflon no.625 roller,

4” albos metal lock include-silecon- screw, grip,

with labour (40mm Two track Window)

25 Providing & fixing Openable aluminum 10.00 2845.00 Smt

anodized section window with Zindal frame

section of 20843, shutter section of 20921, side

section of 20543 section, T section of 25x25

mm size including 5 mm thick ASHAI or

equivalent grey glass, including necessary

fixtures & fastening such as 100 mm hinges,

150 mm handle, 150 mm stopper, door catcher,

etc. Zindal make section as per detail design

drawing given etc. comp. as directed by E.I.C.

26 Providing and fixing Fix Ventilation Jindal 3.00 3302.45 Smt

aluminum section colour anodize, main frame

Partition 20072-6350x38.10(weight kg/m

1.095), louvers 15x40, 4mm figured glass,

screw, grip, silecon, 25x25mm angle, with

27 Providing and laying and fixing Mirror polished 90.00 2833.80 Smt

Granite stone Sill in masonry Wall or concrete

incl. Backing Coat of Cement Plaster in

C.M.1:3, Stone fixing with Hold fast or Screw

using "airdate" adhesive in true line and level

jointed with gray cement slurry, rubbing

finished smooth etc. comp, as directed by

28 Providing and fixing M.S. Plan grill with M.S. 2230.00 77.49 Kg

flats, square bar, round bar, etc. in As par

Drawing required size and spacing in wooden

frames of windows and ventilators, stair railing

including one coat of primer and two coat of

enamel oil paints of approved quality brand and

shade etc complete as directed by Engineer in-

29 Providing and fabricating and fixing square 120.00 139.04 Kg

CRC pipe for gate, railing, dome structural

work, truss Purlin etc. including fabricating,

hoisting fixing in position with angle cleats, as

Per design , applying one coat of red oxide

primer and two coats synthetic enamel oil paint

of approved quality and shade scaffolding etc

complete as directed by Engineer in charge.

30 Providing , fabricating and fixing M.S. shutter & 40.00 3944.22 Smt

Frame of 20 gauge Heavy sheet M.S. plate for

cupboards with necessary stainless steel

fixtures and fastenings of approved quality,

locking arrangement , & Painting two coats of

synthetic enamel paint with a priming coat of

red oxide of approved brand shade etc

complete as directed by Engineer in charge.

31 P/F in position collapsible steel shutter with 4.00 5785.23 Smt

vertical channels 20x10x2mm braced with flat

iron diagonals 20x5mm size with top and

bottom rails of T-rin 40x40x6mm with 38mm

dia, Steel pulleys complete with bolt, nut,

washer, locking arrangement, stopper, handle

including applying a primimg coat of read lead

Paints etc complete as directed by E.I.C

32 Providing and laying and fixing 25mm Polished 51.00 1738.63 Smt

Green Kotah Stone shelves , Partition ,in

masonry making necessary grove and good

same with cement mortar 1:2 (1 cement

sand) laid in true line level and jointed with gray

cement slurry incl. rubbing etc. comp, as

directed by E.I.C.

33 Providing & laying 18 mm thick Granite Stone 15.00 3985.02 Smt

flooring for platform laid on 40 mm thick

polished kotah stone laid in Cement mortar 1:6

( 1 cement :6 sand) incl. front patta of quarter

round polished edge and jointing with araldite

adhesive and cement laid in true line level in

stonewalls surface as per design & drawing

including curing etc complete as directed by

Engineer in charge

34 Labor charges for making round edge to kotah 20.00 206.19 Rmt

stone /marble/ marbo granite tiles etc. as

directed incl. all cost of lalour& material incl.

necessary cleaning the surface etc. comp. as

directed by E.I.C.

35 Providing & applying 20mm thick sand face 1180.00 326.11 Smt

cement plaster on walls surface or any surface

up to any height above G.L consisting of 12mm

thick backing coat of C.M. 1:3 ( 1 cement :

sand) and 8mm thick finished coat of C.M. 1:1

( 1 cement : 1 sand) including cost of

scaffolding curing etc. complete as directed by

Engineer in charge

36 Providing and applying 10mm thick smooth 550.00 171.34 Smt

cement plaster in single coat on brick/ concrete

wall for interior/exterior plastering for Ceiling in

C.M. 1:4 ( 1 cement : 4 coarse sand ) including

finishing even and smooth with floating coat of

neat cement slurry including scaffol0ing , curing

etc complete as directed by Engineer in-charge

For Ground floor

37 Providing and applying 15mm thick smooth 1510.00 212.06 Smt

cement plaster in single coat on brick/ concrete

wall for interior/exterior plastering for ground

floor up to floor two level in true line and level in

C.M. 1:4 ( 1 cement :4 coarse sand ) including

finishing even and smooth with floating coat of

neat cement slurry including scaffolding , curing

etc complete as directed by Engineer in-charge

For Ground floor

38 Providing & Applying Two Coat Sika Cool Coat 1180.00 212.75 Smt

"Single Component, Acrylic Based, Flexible,

Micro Fibre Reinforced Waterproofing And

Heat Reflective Coating Systeme chemical

treatment On any wall Surface Incl. Reparing

and depression with smooth & even surface

etc Complete.as directed by Engineer in charge

39 Providing & Applying acrylic oil bound 2060.00 128.36 Smt

washable distemper (two coats) of approved

brand of required shade on wall & Ceiling

surface to apply one coat of putty and primer

to give an even and smooth on wall surface

including repairing Patch after thoroughly

brushing the surface free from mortar drops

and other foreign matter and also incl.

preparing the surface even & smoothed,

complete as directed by Engineer in-charge

40 Providing and Laying china mosaic flooring for 690.00 931.45 Smt

plain and curved surface. (A)The first applying

neat cement slurry 2.75 Kg/sqmt with admixed

waterproofing compound mixing FBR

FAIRCRETE polymer @ 1.00 bag/150ml after

cleaning the surface preparing base surface (B)

The second applying 50mm thick cement

concrete flooring 1:2:4 ( 1 cement 2 coarse

sand graded stone agg. of 20mm nominal size

B.T. kapchi) laid in one layer with admixed

water proof compound mixing FBR

FAIRCRETE polymer @ 1.00 bag/150ml (C)

Third applying laid over cement mortar

bedding at 15mm thick cement mortar 1:4 to

plain or slope with cement floating coat (D)

Four applying 12mm to 20mm of Brocken piece

made on site from full size white glazed tiles to

be and to be tempered to bring mortar ceramic

up to surfaces with using white cement pigment

including rounding of junction and extending

them up to 10 cms along the wall and curing

with bends any pattern of design as per

drawing or direction including cleaning with

water and oxalic acid etc. complete.

41 Providing & laying Pre-stress cement concret 240.00 686.90 Smt

rubber molded Paver block of 60mm thickM-

200 of approved quality design on bed of sand

including joints with white cement mixed to

match coloure pigment to surface as per design

& drawing including curing etc complete as

directed by Engineer in charge

PLUMBING AND SANITARY WORK

1A Providing & fixing to wall, ceiling and floor of 25.00 72.65 Rmt.

nominal diameter UPVC(Medium grade) tubes

Finolex Or equivalent make of 40 sch. Including

cost of all fittings of Finolex Or equivalent

make and clamps including making good the

wall, ceiling and floor with necessary testing of

leakage etc complete as directed by Engineer

in charge 15mm Dia.

1B 25mm Dia. 25.00 91.84 Rmt.

1C 32mm Dia. 25.00 119.15 Rmt.

1D 40mm Dia. 25.00 148.12 Rmt.

1E 50mm Dia. 25.00 195.67 Rmt

2 Providing and fixing earthenware vitreous china 3.00 1253.52 No

clay white in colour or equivalent make Indian

type Orissa pan W.C. of 580mm x 450mm size

including fixing with C I 100mm dia pipe

connection upto outface of wall including fixing

in proper position bed concrete with C.M. 1:3 (

1 cement : 3 sand ) in true line and level and

slope with integrated foot rest and ‘P’ or ‘S’ trap

including the flush connection including testing,

cleaning, curing etc complete as directed by

Engineer in charge

3 Providing and fixing glazed earthenware 3.00 3456.40 No

equivalent make European type water closet

pan of parry or equivalent make including

fixing P & S trap including fixing in cement

mortar curing in true line and Providing and

fixing 12.5 liters low level flushing cistern of

'Marvel" PVC make with a pair of C. I. or mild

brackets complete with fittings such as lead

value less siphon 15mm nominal size brass

ball value with polythene float C. P. brass

handle unions and couplings for connections

with inlet, outlet and overflow pipes, 40mm. dia

porcelain enameled flush bend including cutting

holes in walls and making good the same

connecting the flush bend with cistern and

closer (A) Vitreous (i) White Colour etc.

complete as directed by Engineer-in-charge

4 Providing and fixing white glazed flat back 6.00 2571.15 No

vitreous china , earthen ware wash basin of

550 mm x 400mm size or equivalent make first

quality with single hole for pillar tap with C.I. or

M.S. brackets including cutting holes in walls

and making good the same including providing

and fixing 15mm dia and pillar tap capstain

head screw high pressure with screw and nuts

40mm dia C.P. brass waste 40mm dia M.I.

fishers union rubber plug and chain etc of

approved quality 15m dia C.P. brass stop tape

40mm dia Rgid PVC waste pipe and 15mm dia

PVC connection pipe for fresh water including

testing and making good the floor walls etc

complete as directed by Engineer in charge

5 Providing & fixing Stainless steel Sink (Nirali or 1.00 3201.70 No

Nilkamal make )Size 600mm x 450mm fix in

Kit plat form with Cement mortar in 1:3

including fitting 32mm dia C.P. brass waste

coupling approved quality with 32mm dia

rigid P.V.C. waste pipe including making the

good the floors walls etc complete as directed

6 Providing and fixing chromium plated bass 27.00 722.15 No

screw down bib cock of equivalent make

Sleepy item code No SL 44-115 with Flange

Make including fixing in pipe line in position as

directed including testing etc complete as

directed by Engineer in charge.

7 Providing & fixing 25mm dia C.P. brass half 3.00 263.77 No

turn flush cock of approved brand for "Cavier"

including fixing the same in pipe line and

testing etc complete as directed by Engineer in

8 Providing and fixing P.V.C Nahni trap of 75 mm 17.00 547.22 Nos

dia inlet and 75 mm dia outlet nominal diameter

of self-cleaning design with Stainless Steel

grating including fixing P.V.C. reducer of

mm dia to 75 mm dia and jointing with adhesive

, cutting and making good the walls and floors

etc complete as directed by Engineer in

9 Providing and fixing S.W. Gully trap of 150mmx 6.00 1246.92 No

100mm ‘P’ type with C.I. grating brick masonry

chamber and water tight C.I. cover with frame

300 mm x 300m size (inside) with standard

weight etc complete as directed by Engineer in

10 Providing & Fixing 8 mm Dia Cromium Plated 3.00 900.00 No

brass/stainless steel jet with flexible tube up to

1 meter long with S.S. triangular plate to WC

PAN and hook fixing in pipe line etc complete

as directed by Engineer in charge.

11 Providing and fixing 75 mm dia PVC cowel 4.00 389.74 No

vent with flap open including fixing with led and

spun yarn fitted air and water tight etc. comp.

As directed by E.I.C.

12 Providing laying & jointing to level and slope 25.00 211.87 Rmt

75mm dia rigid PVC pipes of working pressure

6 kg/Sqmt for “Vertical /Horizontal drainage “

Finolex or It’s equivalent ISI mark approved

make line for wall & floors including necessary

fitting such as bends , tees, "Dutron make "

clamps rubber packing ring etc testing of pipe

line , jointing with adhesive solvent cement

including cost of jointing materials and all other

necessary fixtures ,fitted air and water tight

testing the line etc complete as directed by

Engineer in charge.

13 Providing laying & jointing to level and slope 25.00 417.53 Rmt

110mm dia rigid PVC pipes of working

pressure 6 kg/Sqmt for “Vertical /Horizontal

drainage “ Finolex or It’s equivalent ISI mark

approved make line for wall & floors including

necessary fitting such as bends , tees , "

Dutron make " clamps rubber packing ring etc

testing of pipe line , jointing with adhesive

solvent cement including cost of jointing

materials and all other necessary fixtures

fitted air and water tight testing the line etc

complete as directed by Engineer in charge.

14 Providing laying & jointing to level and slope 25.00 671.91 Rmt

160mm dia rigid PVC pipes of working

pressure 6 kg/Sqmt for “Vertical /Horizontal

drainage “ Finolex or It’s equivalent ISI mark

approved make line for wall & floors including

necessary fitting such as bends , tees , "

Dutron make " clamps rubber packing ring etc

testing of pipe line , jointing with adhesive

solvent cement including cost of jointing

materials and all other necessary fixtures

fitted air and water tight testing the line etc

complete as directed by Engineer in charge.

15 Providing & fixing on wall face 90mm dia PVC 49.00 397.34 Rmt

rainwater pipe of “Finolax or eqv. make”

kg/s.mt with top and bottom el-bow necessary

coupling if any incl. filling the joints with

adhesive & water tight with PVC clamps at

every 1.50m testing etc complete as directed

by Engineer in charge.

16 Providing laying and constructing brick 7.00 2831.93 No

masonry chamber of following internal

dimension BK chamber for underground C.I.

bend with brick of best quality having crushing

strength not less than 35kg/cm2 in C.M. 1:5 (

sand : sand) of 610mm x 455mm internal

dimension with 750mm deep and Havy Pre

cast C.C. cover 10.00 cm thick with RCC top

slab with 1:2:4 ( 1 cement : 2 coarse sand :

graded stone kapchi) foundation concrete

1:5:10 ( 1 cement : 5 coarse sand: : 10 brick

bats of 40mm nominal size) inside plaster

15mm thick with C.M. 1:3 ( 1 cement : 3 coarse

sand) finished wmooth with a floating coat of

neat cement slurry on walls and bed concrete

making channels for easy flow in floors,

including testing etc complete as directed by

Engineer in charge.

17 Providing and constructing 3.00 x 1.20 x 1.80 2.00 48208.33 No

mt depth internal dimension septic tank with

necessary compartment for grit chamber with

white stone bela masonry in C.M 1:6 with

necessary excavation and disposing excavated

stuff as and where directed, PCC 1:5:10 (1

cement: 5sand: 10 graded stone agg. 40mm

nominal size), 15mm thick cement plaster in

C.M. 1:4, IPS flooring, 50 mm thick, 10 x

mm size cement vata, white stone bela

masonry for partition wall in C.M. 1:4, 12cm

thick RCC 1:2:4 (1 cement: 2sand: 4 graded

stone agg. 20mm nominal size ) cover slab with

necessary mild or tore steel reinforcement as

per design, CI main hole cover with frame of

60cm x 45cm size and not lass thane 35kg

(with frame and cover), 75mm dia and 1.80m

long PVS pipe, 75mm dia PVC cowl went

including curing scaffolding form work centering

shuttering etc complete as directed by E.I.C

18 Providing , supplying and fixing in position 10000.00 12.90 Ltr

HDPE Three layer water storage PVC tank

"sintex, Supreme, Plasto, Vectus, Aqua or

equivalent " of approved brand one piece

mounded vertically cylinder of reqd. capacity

including making inlet outlet. washout

overflow pipe connection with 25mm dia G.I.

pipe top cover including testing etc as directed

by Engineer in charge.

19 Providing and construction 3.00m dia and 1.00 55262.83 No

3.05mt depth internal dimension soak well.

With necessary excavation, and disposal of

surplus excavated earth, as and where

directed. With 23cm thick white stone Bella

masonry wall in C.M. 1:6, 11cm thick RCC

1:2:4 (1 cement: 2sand: 4 graded stone agg.

20mm nominal size) cover slab with necessary

mild or tore steel reinforcement as per design,

finishing expose faces with 15cm thick smooth

plaster, CI main hole cover with frame of 60cm

x 45cm size and not lass thane 35kg (with

frame and cover), 75mm dia and 2.00m long

P.V.C. pipe, 75mm dia cowl vent. Including

refilling, with Brick Bat, Curing, scaffolding,

formwork, centering, shuttering, etc complete,

as directed by E.I.C.

Credit From Dismentaling Will Be Deducted From 1St R.A. Bill Of Comtractor's

SUB ESTIMATE NO. 1 (B) :- ELECTRICAL INSTALLION OF OLD NIVEDITA GIRLS HOSTEL FOR

COLLEGE OF AGRICULTRURE AT J.A.U., JUNAGADH

1 Point wiring for Light / Bell with 2-1.5 sq.mm & 131.00 419.15 Pt.

earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length

in below type of pipe erected with 6A Modular

type switch / bell push & accessories and earth

continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base

frame covered with textured/metallic/white

front plate modules erected on / in wall / ceiling

as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D. Connector as

directed. (a) with medium class Rigid PVC

pipe and accessories erected flushed on

wall/ceiling complete.

2 Point wiring for Two Way Controlled Light Point 2.00 530.25 Pt.

with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(green) both are of .ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires

erected in below type of pipe with 6A Modular

type switches and following type of accessories

erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured /

metallic/white front plate modules erected on /

in wall / ceiling as per pipe erected. with

necessary batten/angle holder or ceiling rose or

H.D.Connector as directed. (a) with medium

class Rigid PVC pipe and accessories

erected flushed on wall/ceiling complete

3 Providing following type of Modular Type 66.00 288.86 Pt.

Accessories mounted with PVC /

metallic/Wooden box, single mounting base

frame covered with textured / metallic/white

front plate , modules erected with necessary

connections as per site situation directed by

Engineer In charge. (1) One No. SP 6 Amp.

Switch (2) One No 5 pin plug Cat.III

4 .Providing following type of Modular Type 23.00 363.60 Pt.

Accessories mounted with PVC / metallic/

Wooden box, single mounting base frame

covered with textured / metallic / white front

plate, modules erected with necessary

connections as per site situation directed by

Engineer In charge. (9) 16 Amp. SP one way

switch & (10) 6Amp. Universal socket Cat.III

5 Supplying and erecting led lamps with following 38.00 188.87 No.

wattage capacity of 220 to 240 voltage,

minimum 15000 burning hours life, 500 V in

built-surge protection, Polycarbonate diffuser,

mounting suitable for E14 / E27 / B22 lamp

holders, pf >= 0.5 Cat.III (I.No. 2-4-2 P.No.2)

(A) LED Lamps integral type, with PC

diffuser suitable LAMP holder (iii) 10 to

6 Supplying & erecting fan hook box of 10 mm 29.00 108.07 No.

M.S. round bar bounded to the RCC bars up to

50mm length each side and pierced through a

16 Gauge M.S. box / Heavy Duty PVC box

complete erected concealed in Ceiling with

necessary finishing.

7 Providing 2.5mm.thick laminated acrylic sheet 29.00 18.18 No.

to cover the fan hook or Fan box.

8 Providing following type of Modular Type 29.00 380.77 No.

Accessories mounted with PVC /

metallic/Wooden box, single mounting base

frame covered with textured / metallic/white

front plate , modules erected with necessary

connections as per site situation directed by

Engineer In charge. (5) Electronic hum Free

four or more steps EME Fan regulator

9 Providing & erecting Approved make Ceiling 29.00 1948.29 No.

Fan with double ball bearing ISI mark with

Condenser 230 volt A.C.50 Hz 1200 mm

sweep complete having 3 blades aluminium

body and blade sets having ornamental design

shanks , canopy erected with earthing. [ Make

shall be approved by Engineer in Charge].

10 Supplying and erecting 19 / 20 mm. nominal 22.00 108.07 No.

bore Medium Class M.S. Pipe down rod

erected duly painted for fan complete with

proper insulation without leakage and earthing.

11 Supplying and erecting LED indoor fittings with 71.00 295.93 No.

LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing

used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/

aluminium die cast powder coated and high

U.V. & corrosion resistance with diffuser with

company mark/name 160V to 270V, Power

Factor more than 0.95, THD < 15%, CCT

K to 6500K, Luminaire efficacy>

lumens/watt, LED driver efficiency > 85 % (

fitting required LM-79 & LM-80 Certificates)

(NOTE: Below description have shown ranges

of Wattage capacity of LED fittings. The

Engineer in charge may select any wattage

capacity between the ranges shown.) (A) Tube

Light with integral driver (iii) 18-20 Watts,

Surge - 2KV, IP-20, conventional 4 fee t Cat-

12 Providing and erecting ISI mark Medium class 685.00 32.32 Mtr.

RIGID PVC PIPES of following size complete

to be erected on/in wall or ceiling erected with

necessary PVC fittings & Junction boxes fixed

with adhesive solution & Clamps with following

dia of pipes, in approved manner as directed

13 Providing and erecting ISI mark Medium class 481.00 43.43 Mtr.

RIGID PVC PIPES of following size complete

to be erected on/in wall or ceiling erected with

necessary PVC fittings & Junction boxes fixed

with adhesive solution & Clamps with following

dia of pipes, in approved manner as directed

For Laying of Pipes on Stone Wall add to the

following item rate per meter (b) 25 mm.

14 Providing and erecting Mains with 1.1 KV grade 1285.00 59.59 Mtr.

FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe

to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper conductor

FRLS PVC insulated stranded wire of green

colour for earth continuity of following size (E)

in existing pipe (b) 2 wire 2.5 sq. mm.

15 Supplying & erecting single phase approved 2.00 2054.34 No

make industrial exhaust fan suitable for

medium duty ring mounted low noise operation

suitable for medium duty having following dia

size and maximum speed in RPM [A] 305 mm

dia 900 RPM Cat-II

16 Providing and erecting Sheet Steel powder 6.00 2913.85 No.

coated MCB distribution board - flush / surface

mounted fitted with busbar, neutral link, earth

bar and DIN rail, Conforms to IS 8623-1 &

IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be

used of same company of MCB to be used)

suitable for(B) three phase incoming and single

phase horizontal type outgoing Per phase

isolation type (PPI) (ii) 6 way(b) sheet steel

17 Providing and erecting Approved make Four 1.00 6173.12 No.

pole moulded case circuit breaker having

breaking capacity ICU of 25 KA. at 415 V,

having normal current rating up to 25 A to

100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with all

internal connections, spreader tinned copper &

complete erected in existing 16 G.M.S. housing

18 Providing and erecting Miniature circuit 70.00 112.11 No.

breaker single pole 6A to 25A suitable to

operate on 240 V A.C. system and having

breaking capacity 10 KA to be erected in

existing box. Confirming to IS 8828/1996 with

ISI Mark Cat-III

19 Providing and erecting Approved make Four 4.00 6173.12 No.

pole moulded case circuit breaker having

breaking capacity ICU of 25 KA. at 415 V,

having normal current rating up to 25 A to 63A.

with Fixed thermal & magnetic release suitable

to work on A.C. supply 50 c/s. with all internal

connections, spreader tinned copper &

complete erected in existing 16 G.M.S.

housing. Cat-III.

20 Providing and erecting Approved make RCCBs 6.00 3040.10 No

conforming to IS: 12640 and having sensitivity

of 30 mA and Short Circuit withstand capacity

of 10 KA and suitable for operation on 3 phase

and neutral 415V,50Hz. having characteristic of

quick action & tripping with all advance feature

& do not incorporate any electronic component

for following Max. Rating erected as directed.

(iii) 63 Amps. FP.

21 Providing and erecting busbar chamber 4.00 2602.77 Rmt

confirming to IS-375 fabricated from 16 G.M.S.

sheet, dust & vermin proof having hinged door

with rubber gasket and necessary busbar

supports with Aluminium busbar having current

density not more than 0.8 Amp. / sq.mm (Rated

current / cross section area) duly wrapped with

colour insulation tape for phase sequence,

three phase & neutral each Suitable for

following current capacity with necessary

painting mounted on wall or pedestal frame of

required size with necessary connections.

(A) Suitable for 63/ 100 Amp. Capacity.

22 Supplying & erecting funnel type earthing 1.00 7874.97 No.

having earth plate of following size burred in

specifically prepared earth pit 3 mtr. below

ground with 40 kg. charcoal and salt with

alternate layers of charcoal & salt, 20mm.dia.

G.I. pipe with Funnel with a wire mesh for

watering & bricks masonry block, C.I. Cover

complete as per para 7.3 of IS 3043 with

necessary length of double Galvanized Iron /

copper earth wire No 6 SWG bolted with lug to

the plate and covered in 12 mm dia. G.I. pipe

2.5 mtr long complete connected to the nearest

switch gear with end socket as per direction &

duly tested by earth tester confirming to IS (As

per drawing) with following specification (C)

with 60 x 60x 0.315 cms. Copper earth Plate.

23 Providing one bag of 25 Kg. Additional Back 1.00 707.00 No.

Filling Compound (BFC) suitable for safe

earthing device.

24 Providing and erecting Annealed bare Copper 455.00 794.87 Kg.

wire 8 to 16 SWG.

25 Providing and erecting XLPE (IS:7098)(I)-88 ISI 286.00 673.67 Mtr

armoured cable multistand Copper conductor

for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe at road

crossing or floor of following size of cables.

(A) 4 core 10 Sq.

26 Solder less crimping type Copper lugs 50.00 10.10 No.

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

manner. (B) 10 Sq.mm.

27 Supplying KITKAT pattern porcelain cut-out 3.00 278.76 No

fuse with base of following current capacity

erected on existing block board. (v) 100A.

28 Providing & erecting weather proof, dust & 2.00 19387.96 Smt

vermin proof, floor mounted front operated

indoor type cubical panel board necessary IP-

42 and above protection as per approval from

engineer incharge made from 14 SWG thick

CRC M.S. sheet for outer body & doors,

SWG thick CRC M.S.sheet for internal

partitions with necessary accesories

supporting angles/ flats channel including

cutting, bending, drilling, welding, riveting with

internal partitions & cable alley as per

requirements & instruction of engineer-in-

charge with erection of supplied switch gears,

BUSBARS, suitable size of inter connecting

PVC copper wire / copper-aluminium strips,

rubber grommets, rib, bakelite control

fuses/MCB for measuring instruments, earth

bus & earth bolts, foundation flange - bolts-

base Plates, sufficient nos. of hinged doors,

handles with locking arrangement and rubber

gasket, heavy duty end terminal connection,

danger notice board, necessary ventilation,

earthing strip complete. The Panel shall be

painted with epoxy powder coating. (The rates

excludes the cost of switchgears, bus bars,

inter connecting mains & Copper Aluminium

strips, meters, Fuses etc. The dimension shall

be measured excluding base beams) The

panel shall be supplied with following approved

manufacturers with following size.. (B) The

standard companies switch gear shall be

used and only manufacturers at CPRI

approved factory (ii) with 550 mm. Depth.

29 Providing and erecting fabricating M.S. angle, 150.00 77.77 Kg

flats bars, channels sectings complete with

cutting, welding griding and finishing dully

painted with one coat of red oxide with erecitng

on site as per direction of engineer incharge

with necessary gouting, cementing, plastering

& finishing etc complete.

30 Providing and erecting XLPE(IS:7098)(I)-88 ISI 210.00 362.59 Mtr.

armoured cable multistrand / Solid Copper

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe

at road crossing or floor of following size of

cables. (B) 4 core 4 Sq. mm.

31 Supplying and erecting LED street light / Flood 10.00 2201.80 No.

light fittings with High power White LEDs

wattage of 3 Watt and above assembled on

single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast

aluminium housing with smooth finish powder

coated and heat sink extruded aluminium with

diffuser and Polycarbonate optics/ lenses with

company mark/name engraved or embossed

160 to 270 V,Power Factor more than 0.95,

THD < 10 %, CCT 3000 K to 5700K,Uniformity

ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency > 85 %.(

fittings required LM-79 & LM-80

certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any

wattage capacity between the ranges

shown.)(A) Street Light (IP-65), Surge

protection -4KV integral and ,Light must have

440VAC line supply with over-voltage

protection. (iii) above 24 to 36 watt Cat-lll.

32 Supplying following size of Light duty “A” Class 10.00 471.67 Mtr.

G.I. Pipe & erecting as directed by Engineer-in-

charge. (C) 80 mm dia.

33 Bakelite adopter for Holder to be erected.. 71.00 9.09 No.

34 Providing following type of Modular Type 100.00 24.24 No.

Accessories mounted with PVC /

metallic/Wooden box, single mounting base

frame covered with textured / metallic/white

front plate, modules erected with necessary

connections as per site situation directed by

Engineer In charge. (7) Blank Plate Single

35 Neutral Link for 4.00 274.72 No

36 providing and erecting Mains with ISI marked, 100.00 87.87 Mtr.

1.5KV grade electrolyte multi stranded,

annealed copper conductor with heat resistant

PVC insulated conforms to IS 694, IEC -

erected in existing pipe of following size

(Specifically for control panel, relays, power

switchgears, motor starters & control wiring)

with required size of copper lugs, nuts and

bolts if required. (f) One wire 10.00 sq. mm.

37 Providing and erecting following additional 1.00 873.65 Each

parts for panel mounting MCCBs (A )Extended

operating rotary handle with pad lock with three

position trip, off, on suitable for 25A to 250 A

panel mounting Cat. III.

38 Supplying and erecting approved make suitable 3.00 43.43 No

panel indicator LED type lamp, lens cover,

complete erected with necessary connections.

39 Supplying and erecting approved make panel 1.00 1275.63 No

mounting type Digital Voltmeter having 3 digits

LED display, 0 to 750 AC Volts range erected

on existing panel board with all connection,

wiring etc. with manufacturers alibration

40 Supplying and erecting approved make panel 1.00 1558.43 No

mounting type Digital Ammeter having

digits LED display, external CT operated,

calibrated for 0 to 1000 Amps suitable to

operate on 500 Volt AC , erected on existing

panel board with all connection, wiring etc. with

manufacturers calibration certificate.

41 Solder less crimping type Copper lugs 30.00 8.08 No

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

manner. (C) 4 Sq.mm .

42 Providing & laying approved make ISI marked 520.00 52.52 Mtr.

Rigid PVC pipe having 6Kg / cm2 (Class-3) to

be erected at road crossing on or floor as

directed for laying of cable. The pipes as

following size of dia & weight per 6 mtr. (A)

mm inner Dia. (1.68 Kg / 6 RMT).

43 Providing and, fixing heavy duty flange type 80.00 38.38 No.

brass cable gland with rubber ring for PVC

insulated armoured cable complete with out

going tails, insulating tape etc for following size

of cables (C) 2 to 4 core 10 Sq. mm.

44 Providing and, fixing heavy duty flange type 20.00 33.33 No.

brass cable gland with rubber ring for PVC

insulated armoured cable complete without

going tails, insulating tape etc for following size

of cables. (A) 2 to 4 core 2.5 / 4 Sq. mm.

45 Providing and erecting Mains with 1.1 KV grade 500.00 44.44 Mtr.

FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe

to be erected concealed in /flushed on wall/

ceiling, with 1.5 sq. mm copper conductor

FRLS PVC insulated stranded wire of green

colour for earth continuity of following size (E)

in existing pipe (a) 2 wire 1.5 sq. mm.

46 Providing & installing type 1+2 AC Surge 1.00 14513.37 No.

Protection Device (SPD), TP+N Pole with

required accessories in the panel.

47 Providing and erecting XLPE (IS:7098)(I)-88 ISI 225.00 138.37 Mtr.

armoured cable multistrand / Solid Aluminium

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of

following size of cables (C) 4 core 10 Sq. mm.

48 Providing & erecting 415 V MCB Four Pole for 10.00 578.73 Each

Motor & Inductive Load (B Curve) having 10KA

breaking capacity & confirms to IS :8828 in

existing box having following capacity (a) 6 to

32 Amp. Cat.III .

49 Supplying and erecting Ammeter / Voltmeter 2.00 317.14 Each

selector switch for 3 phase AC Supply 500 V

on existing panel board with necessary

50 Providing & erecting L.T. Current Transformer 1.00 274.72 Each

with bar primary 50/5 to 1000/5 ratio 15 VA

burden erected in existing CRCA box duly

secured with insulating materials connected to

51 Providing and erecting Approved make. energy 1.00 4717.71 Each

meter 3 phase 4 wire unbalanced load

V. 50A/100A complete erected as directed with

necessary earth wire. With Suitable set of CTS

for 100A Energy Meter Cat. III.

52 Providing and fixing approved make Perforated 200.00 622.16 Mtr

C type cable tray. Made from sheet steel. The

cable tray should be single or double bended

as per required and as per IS 2062/1079 and

shall be coated with hot dip galvanizing as per

IS 2629/4759. with max 17.5% perforation with

coupler plate / Fish plate and GI hardware like

nut - bolt and washers etc. erection with

necessary support (included) as per

Specification and as per instruction of engineer

in charge. (5) 300 X 50 X 2.0 mm Thick.

SUB ESTIMATE NO.1 Total

SUB ESTIMATE NO. 2 :- REPAIRING & RENOVATION OF VIVEKANAND BOYS HOSTEL OF

C.A.E.T. AT J.A.U., JUNAGADH

1 Dismantling tiles of stone floors laid in mortar 1330.00 46.80 Smt

including stacking of serviceable material &

disposable of unserviceable material with all

lead & lift. Etc. Comp. as directed by E.I.C.

2 Demolition of Stone/ Brick Work incl. stacking 1.00 536.10 Cmt

of serviceable material & disposable of

unserviceable material with all lead & lift. Etc.

Comp. as directed by E.I.C.

3 Dismantling Sanitary fittings like wash basin. 36.00 394.51 Each

W.C. pan Indian and European type, flushing

tank etc. including stacking the material with all

lead and lift Etc. Comp. as directed by E.I.C.

4 Dismantling of old cement plaster incl. scraping 230.00 50.50 Smt

of wall, incl. stacking of serviceable material &

disposable of unserviceable material with all

lead & lift. Etc. Comp. as directed by E.I.C.

5 Dismantling doors, windows, ventilators etc. 37.00 182.94 Each

(wood or steel) shutters Not exceeding

Sq.mt. area. including chowkhats architraves,

holdfasts and other attachment etc. complete

and stacking them within all lead & lift. Etc.

Comp. as directed by E.I.C.

6 Providing and laying cement concrete 1:4:8 mix 100.00 2680.21 Cmt

( 1 cement :4 coarse sand:8 graded stone agg.

of 20mm nominal size B.T. kapchi)for

foundation & plinth laid in true line and level

incld. Compacting & curing etc. but excluding

the cost of form work etc. complete as directed

by Engineer in-charge

7 Providing and laying color Ceramic ties in 110.00 857.42 Smt

flooring, trends of steps landing of 25mm thick

bed average thickness of C.M. 1:2 laid in true

line and level jointed with neat cement slurry

mixed with pigment to match the shade of the

tiles of incl. rubbing and polishing etc. comp.

as directed by Engineer in-charge

8 Providing and laying color Ceramic ties in 1040.00 1038.39 Smt

skirting and risers of steps not excluding 30cms

in height on 10mm thick cement plaster C.M.

1:3 (1 cement : 3 sand) laid in true line and

level jointed with neat cement slurry mixed

with pigment to match the shade of the tiles of

incl. rubbing and polishing etc. comp. as

directed by Engineer in-charge

9 Providing laying &fixing 25mm thick polished 480.00 971.95 Smt

kotah stone slab flooring over 20mm(average)

thick base of cement mortar 1:6 (1 cement :

coarse sand) laid in true line &level and slope

including jointed with gray cement slurry

including curing rubbing and polishing etc

complete as directed by Engineer in charge

10 P/L and fixing 25mm Polish kotah stone slab in 60.00 1056.26 Smt

risers steps dado and pillars laid in 10mm th.

Cement mortar 1:3 ( 1 cement :3 sand) laid in

true line level and slope & jointed with grey

neat cement slurry including curing rubbing&

polishing etc complete as directed by Engineer

11 Providing and fixing Fix Ventilation Jindal 1.00 1300.91 Smt

aluminum section colour anodize, main frame

Partition 20072-6350x38.10(weight kg/m

1.095), louvers 15x40, 4mm figured glass,

screw, grip, silecon, 25x25mm angle, with

12 Providing & fixing Openable aluminum 45.00 2702.56 Smt

anodized section window with Zindal frame

section of 20843, shutter section of 20921, side

section of 20543 section, T section of 25x25

mm size including 5 mm thick ASHAI or

equivalent grey glass, including necessary

fixtures & fastening such as 100 mm hinges,

150 mm handle, 150 mm stopper, door catcher,

etc. Zindal make section as per detail design

drawing given etc. comp. as directed by E.I.C.

13 Providing and laying and fixing Mirror polished 4.00 2833.80 Smt

Granite stone Sill in masonry Wall or concrete

incl. Backing Coat of Cement Plaster in

C.M.1:3, Stone fixing with Hold fast or Screw

using "airdate" adhesive in true line and level

jointed with gray cement slurry,rubbing finished

smooth etc. comp, as directed by E.I.C.

14 Providing and fixing M.S. Plan grill with M.S. 59.00 77.49 Kg

flats, square bar, round bar, etc. in As par

Drawing required size and spacing in wooden

frames of windows and ventilators, stair railing

including one coat of primer and two coat of

enamel oil paints of approved quality brand and

shade etc complete as directed by Engineer in-

15 Providing and fixing 30mm thick Machine 20.00 4775.13 Smt

Press Water proof Flush shutter for door make

of SOHAM, VALORA, JEDIX, OMEN,

UMAVANSHI or Equivalent make with

laminated sheet 0.80mm on Both side with Pre

stress cement Concrete frame of 250 x

mm size of approved quality including

Periphery teak wood beading of 12 mm thick,

Shutter with S.S. screw in level with I-Twenty

make Stainless Steel fixitures & fastening and

one coat of primer and two coats of oil paint on

periphery side etc complete as directed by

Engineer in charge

16 Providing and fixing sheet glass ordinary 20.00 1115.12 Smt

quality bedded in putty and fixed with wooden

beadings including the cost of wooden

beadings of first-class teak wood and

necessary cutting of glass. (4) 4mm thick

17 Providing and applying 10mm thick smooth 230.00 171.34 Smt

cement plaster in single coat on brick/ concrete

wall for interior/exterior plastering for Ceiling in

C.M. 1:4 ( 1 cement : 4 coarse sand ) including

finishing even and smooth with floating coat of

neat cement slurry including scaffol0ing , curing

etc complete as directed by Engineer in-charge

For Ground floor

18 Providing & Applying acrylic oil bound 9590.00 83.21 Smt

washable distemper (two coats) of approved

brand of required shade on wall & Ceiling

surface to apply one coat of putty and primer

to give an even and smooth on wall surface

including repairing Patch after thoroughly

brushing the surface free from mortar drops

and other foreign matter and also incl.

preparing the surface even & smoothed,

complete as directed by Engineer in-charge

19 Providing & Applying Finishing wall with 3360.00 114.53 Smt

weather proof exterior emulsion paint on wall

surface (Two coats) surface to give an even

and smooth on wall surface including repairing

Patch after thoroughly brushing the surface

free from mortar drops and other foreign matter

and also incl. preparing the surface even &

smoothed, complete as directed by Engineer

20 Painting two coats of oil paint on previously 110.00 109.74 Smt

Painted Steel Surface any surface with

brushing, remove oil gloss, of approved quality,

brand & mfg. and shade incl. cleaning the

surfaces, scaffolding etc. complete as directed

by Engineer in-charge.

21 Providing & Applying Three coat "Asian Paints 230.00 366.56 Smt

Damp Proof" Chemical(Asian Paints is a fiber-

reinforced elastomeric liquid applied to the

waterproofing membrane) chemical treatment

on any Roof Surface Incl. Repairing and

depression with smooth & even surface etc.

completed as directed by Engineer in charge.

22 Providing and Fixing Galvenised CHAIN LINK 470.00 1187.83 Smt

of 75x75mm Size - 10 Gauge for Fencing with

Frame work of 40x40x5mm angle at 2.5m C/C

,necessary inclind support of angle 40x40x5,

Supporting to Jali with M.S. Flat 30x5mm. incl.

Straighten jail and Fixing with G.I. Wire or nut-

boult to hold in Position, Painting a coat of Red

oxide Primer and two coat of ready mix oil

paint, incl. Excavation 0.6x0.6x0.75 size fixing

angle 0.75m with C.C.1:2:4 concrete, curing

and form work etc. comp. as directed by

PLUMBING AND SANITARY WORK

1A Providing laying and jointing in true line and 30.00 72.65 Rmt

level U.P.V.C. Pipe (SCH- 40) for cold water

including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the

help of clamp at every two meter C/C or shall

be concealed as directed including necessary

fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent,

including cost of all materials. (A) 15 mm dia

1B 25 mm dia 30.00 91.84 Rmt

1C 32 mm dia 30.00 119.15 Rmt

1D 50 mm dia 30.00 195.67 Rmt

2 Providing and fixing earthenware vitreous china 12.00 1253.52 No

clay white in colour parry or equivalent make

Indian type Orissa pan W.C. of 580mm x

450mm size including fixing with C I 100mm

dia pipe connection upto outface of wall

including fixing in proper position bed concrete

with C.M. 1:3 ( 1 cement : 3 sand ) in true line

and level and slope with integrated foot rest

and ‘P’ or ‘S’ trap including the flush connection

including testing, cleaning, curing etc complete

as directed by Engineer in charge

3 Providing and fixing earthen ware urinal of 12.00 1468.42 No

approved quality and brand, flat back type of

size 430 x 260 x 350 mm with C. P. brass stop

tap joint with heavy connection and rigid PVC

pipe 32 mm dia as per directed by Engineer In-

4 Providing and fixing vitreous China flat back 12.00 2571.16 No

Wash basin 550 x 400 mm size in white or

colour wash basin with single hole for pillar

tape with C.I. or M.S. bracket, painted white

including cutting holes, 15 mm pillar tape,

captain head, screw down, high pressure with

sank screw and back nut washer, with C.P.

brass waste coupling 32 mm dia, with 15 mm

C.P. brass stop tape and 32 mm dia rigid

P.V.C. waste pipe and making good the same

as directed by Engineer In- Charge.

5 Providing and fixing chromium plated bass 36.00 186.83 No

screw down bib cock of equivalent make

Sleepy item code No SL 44-115 with Flange

Make including fixing in pipe line in position as

directed including testing etc complete as

directed by Engineer in charge.

6 Providing & fixing 25mm dia C.P. brass half 12.00 254.78 No

turn flush cock of approved brand for "Cavier"

including fixing the same in pipe line and

testing etc complete as directed by Engineer in

7 Providing and fixing P.V.C Nahni trap of 75 mm 30.00 547.22 No

dia inlet and 75 mm dia outlet nominal diameter

of self-cleaning design with Stainless Steel

grating including fixing P.V.C. reducer of

mm dia to 75 mm dia and jointing with

adhesive, cutting and making good the walls

and floors etc complete as directed by

Engineer in charge

8 Providing laying & jointing to level and slope 50.00 213.99 Rmt

75mm dia rigid PVC pipes of working pressure

6 kg/Sqmt for “Vertical /Horizontal drainage “

Finolex or It’s equivalent ISI mark approved

make line for wall & floors including necessary

fitting such as bends , tees , " Dutron make "

clamps rubber packing ring etc testing of pipe

line , jointing with adhesive solvent cement

including cost of jointing materials and all other

necessary fixtures ,fitted air and water tight

testing the line etc complete as directed by

9 Providing laying & jointing to level and slope 50.00 834.54 Rmt

110mm dia rigid PVC pipes of working

pressure 6 kg/Sqmt for “Vertical /Horizontal

drainage “ Finolex or It’s equivalent ISI mark

approved make line for wall & floors including

necessary fitting such as bends , tees , "

Dutron make " clamps rubber packing ring etc

testing of pipe line , jointing with adhesive

solvent cement including cost of jointing

materials and all other necessary fixtures

fitted air and water tight testing the line etc

complete as directed by Engineer in charge.

10 Providing & fixing on wall face 90mm dia PVC 120.00 397.33 Rmt

rainwater pipe of “Finolax or eqv. make”

kg/s.mt with top and bottom el-bow necessary

coupling if any incl. filling the joints with

adhesive & water tight with PVC clamps at

every 1.50m testing etc complete as directed

by Engineer in charge.

11 Providing and fixing pre-cast Rubber Dye / 360.00 686.90 Smt

steel Dye inter locking concrete block 60mm

thick with grade of concrete M300 pnumatic

compressed / vibrate mechanically and as per

approved design Confirming to IS 15658 :

including 35 mm Sand layer for levelling and

filling the joint with sand in proper line and level

as per guidlines of IRC : SP 63-2018 etc.

SUB ESTIMATE NO.2 Total

SUB ESTIMATE NO. 3 :- REPAIRING & RENOVATION OF VISHVAKARMA HOSTEL AT J.A.U.,

1 Dismantling of old cement plaster incl. scraping 2800.00 50.50 Smt

of wall, incl. stacking of serviceable material &

disposable of unserviceable material with all

lead & lift. Etc. Comp. as directed by E.I.C.

2 Dismantling tiles of stone floors laid in mortar 490.00 46.77 Smt

including stacking of serviceable material &

disposable of unserviceable material with all

lead & lift. Etc. Comp. as directed by E.I.C.

3 Dismantling doors, windows, ventilators etc. 130.00 182.94 Each

(wood or steel) shutters Not exceeding

Sq.mt. area. Including chowkhats architraves,

holdfasts and other attachment etc. complete

and stacking them within all lead & lift. Etc.

Comp. as directed by E.I.C.

4 Dismantling Sanitary fittings like wash basin. 120.00 394.51 Each

W.C. pan Indian and European type, flushing

tank etc. including stacking the material with all

lead and lift Etc. Comp. as directed by E.I.C.

5 Demolition of Stone/ Brick Work incl. stacking 0.44 536.09 Cmt

of serviceable material & disposable of

unserviceable material with all lead & lift. Etc.

Comp. as directed by E.I.C.

6 Providing and laying cement concrete 1:4:8 mix 40.00 2680.21 Cmt

( 1 cement :4 coarse sand:8 graded stone agg.

of 20mm nominal size B.T. kapchi)for

foundation & plinth laid in true line and level

incld. Compacting & curing etc. but excluding

the cost of form work etc. complete as directed

by Engineer in-charge

7 Providing and laying Ordinary Cement, 80.00 335.83 Smt

Concrete 40mm thick flooring 1:2:4 ( 1 cement

:2 coarse sand :4graded stone agg. Of 20mm

nominal size B.T. kapchi) with mixing FBR

polymer Water proofing Component (Fare

mate) in true line and level including necessary

exposed surface one layer smooth finishing

with a floating coat of neat cement and curing

etc. complete but excluding cost of

reinforcement etc comp as directed by E.I.C.

8 Providing and fixing Precast R.C.C. door frame 38.00 1000.00 Each

of size 100x 75 mm fixing on wall surface with

hold fast, necessary Cement Plaster in C.M.1:2

finish smooth etc complete as directed by

Engineer in-charge.

9 Providing and fixing 30mm thick Machine 17.76 4345.72 Smt

PressWater proof Flush shutter for door make

of SOHAM, VALORA, JEDIX, OMEN,

UMAVANSHI or Equivalent make with

laminated sheet 0.80mm on Both side

including Periphery teak wood beading of

mm thick, Shutter with S.S. screw in level with

I-Twenty make Stainless Steel fixitures&

fastening and one coat of primer and two coats

of oil paint on periphery side etc complete as

directed by Engineer in charge. (Only shutter)

10 Providing and fixing 25mm thick Form PVC 51.36 3401.43 Smt

shutter door of DECORA or Equivalent make.

Including Shutter with S.S. screw in level with

I-twenty make Stainless steel fixtures &

fastening and complete as directed by

Engineer in charge.

11 Providing & fixing Openable aluminum 24.49 2845.00 Smt

anodized section window with Zindal frame

section of 20843, shutter section of 20921, side

section of 20543 section, T section of 25x25

mm size including 5 mm thick ASHAI or

equivalent grey glass, including necessary

fixtures & fastening such as 100 mm hinges,

150 mm handle, 150 mm stopper, door catcher,

etc. Zindal make section as per detail design

drawing given etc. comp. as directed by E.I.C.

12 Providing and fixing mosquito proof net 60.54 3303.89 Smt

openble shutter colour anodize Jindal section

21056-25x50 (weight kg/m 0.717), vertical top

& bottom 20921- 25x50 (weight kg/m 0.584),

saint - gobain mosquito net/ aluminum steal

metal mosquito net, 10mmx10mm pvc solid

square bar, hinges 25x100 stainless steal,

opneble handle, window stay lechis, stopper,

with labour (mosquito net openable window ).

13 Providing and fixing sheet glass ordinary 12.27 1134.95 Smt

quality bedded in putty and fixed with wooden

beadings including the cost of wooden

beadings of first-class teak wood and

necessary cutting of glass. (4) 4mm thick

14 Providing and laying and fixing Mirror polished 36.84 2833.80 Smt

Granite stone Sill in masonry Wall or concrete

incl. Backing Coat of Cement Plaster in

C.M.1:3, Stone fixing with Hold fast or Screw

using "airdate" adhesive in true line and level

jointed with gray cement slurry,rubbing finished

smooth etc. comp, as directed by E.I.C.

15 Providing , fabricating and fixing M.S. shutter & 16.63 3944.22 Smt

Frame of 20 gauge Havy sheet M.S. plate for

cupboards with necessary stainless steel

fixtures and fastenings of approved quality,

locking arrangement , & Painting two coats of

synthetic enamel paint with a primimg coat of

red oxide of approved brand shade etc

complete as directed by Engineer in charge.

16 Providing and laying and fixing 25mm Polished 2.51 1738.63 Smt

Green Kotah Stone shelves , Partition ,in

masonry making necessary grove and good

same with cement mortar 1:2 (1 cement

sand) laid in true line level and jointed with gray

cement slurry incl. rubbing etc. comp, as

directed by E.I.C.

17 Providing and laying color Ceramic ties in 600.00 1038.39 Smt

skirting and risers of steps not excluding 30cms

in height on 10mm thick cement plaster C.M.

1:3 (1 cement : 3 sand) laid in true line and

level jointed with neat cement slurry mixed

with pigment to match the shade of the tiles of

incl. rubbing and polishing etc. comp. as

directed by Engineer in-charge

18 Providing and laying Ceramic ties 6mm thick in 120.00 857.42 Smt

flooring, trends of steps landing laid on a bed

of 12mm thick C.M. 1:3 laid in true line and

level jointed with neat cement slurry mixed with

pigment to match the shade of the tiles of incl.

rubbing and polishing etc. comp. as directed by

Engineer in-charge

19 Providing & applying 20mm thick sand face 1246.15 326.11 Smt

cement plaster on walls surface or any surface

up to any height above G.L consisting of 12mm

thick backing coat of C.M. 1:3 ( 1 cement :

sand) and 8mm thick finished coat of C.M. 1:1

( 1 cement : 1 sand) including cost of

scaffolding curing etc. complete as directed by

Engineer in charge.

20 Providing and fixing reinforcement in form of 80.00 274.01 Smt

welded wire mesh fabric50 mm x 50 mm size

made from 3mm wire for guniting work (to be

provided in first layer) including cutting, placing,

tying with iron wireetc. Complete

21 Guniting concrete surface with cement mortar 80.00 921.73 Smt

1:2 (1 part of cement: 2 parts of graded sand)

for specified thickness, to be done in two

layers, applied with compressor after cleaning

surface and spraying with epoxy (bonding

agent) @1.00 kg per 4.00 sqm area, using

quick setting compound as per manufacturer’s

specifications including scaffolding, all

equipment’s labor etc. complete asper

technical specifications (excluding

reinforcement), for average thickness of:(II)

22A Providing and applying 15mm thick smooth 400.00 212.06 Smt

cement plaster in single coat on brick/ concrete

wall for interior/exterior plastering for ground

floor up to floor two level in true line and level in

C.M. 1:4 ( 1 cement :4 coarse sand ) including

finishing even and smooth with floating coat of

neat cement slurry including scaffolding , curing

etc complete as directed by Engineer in-charge

22B First Floor 400.00 234.81 Smt

22C Second Floor 400.00 257.57 Smt

23A Providing and applying 10mm thick smooth 166.67 171.34 Smt

cement plaster in single coat on brick/ concrete

wall for interior/exterior plastering for Ceiling in

C.M. 1:4 ( 1 cement : 4 coarse sand ) including

finishing even and smooth with floating coat of

neat cement slurry including scaffol0ing , curing

etc complete as directed by Engineer in-charge

23B First Floor 166.67 194.09 Smt

23C Second Floor 166.67 216.85 Smt

24 Providing & Applying Two Coat Sika Cool Coat 2500.00 212.75 Smt

"Single Component, Acrylic Based, Flexible,

Micro Fibre Reinforced Waterproofing And

Heat Reflective Coating Systeme chemical

treatment On any wall Surface Incl. Reparing

and depression with smooth & even surface

etc Complete.as directed by Engineer in charge

25 Providing & Applying bound washable 5900.00 83.21 Smt

distemper (two coats) of approved brand &

manufacture and of required shade on Wall &

Ceiling surface to apply one coat of putty and

primer to give an even and smooth on wall

surface including repairing of patch with plaster

of Paris after thoroughly brushing the surface

free from mortar drops and other foreign matter

and also incl. preparing the surface even &

smoothed, complete as directed by Engineer

26 Providing & Applying TWo Coat Cool Coat 800.00 348.75 Smt

Chemical Treatment With One Coat Of Base

Sika Primer "Single Component, Acrylic

Based, Flexible, Micro Fibre Reinforced

Waterproofing And Heat Reflective Coating

Systeme chemical treatment On any wall

Surface Incl. Reparing and depression with

smooth & even surface etc Complete.as

directed by Engineer in charge

PLUMBING AND SANITARY WORK

1 Providing and fixing earthenware vitreous china 18.00 1253.52 No

clay white in colour parry or equivalent make

Indian type Orissa pan W.C. of 580mm x

450mm size including fixing with C I 100mm

dia pipe connection upto outface of wall

including fixing in proper position bed concrete

with C.M. 1:3 ( 1 cement : 3 sand ) in true line

and level and slope with integrated foot rest

and ‘P’ or ‘S’ trap including the flush connection

including testing, cleaning, curing etc complete

as directed by Engineer in charge

2 Providing and fixing vitreous China flat back 12.00 2571.16 No

Wash basin 550 x 400 mm size in white or

colour wash basin with single hole for pillar

tape with C. I. or M.S. bracket, painted white

including cutting holes, 15 mm pillar tape,

captain head, screw down, high pressure with

sank screw and back nut washer, with C. P.

brass waste coupling 32 mm dia, with 15 mm

C. P. brass stop tape and 32 mm dia rigid P. V.

C. waste pipe and making good the same as

directed by Engineer In- Charge.

3 Providing and fixing earthen ware urinal of 18.00 1490.84 No

approved quality and brand, flat back type of

size 430 x 260 x 350 mm with C. P. brass stop

tap joint with heavy connection and rigid PVC

pipe 32 mm dia as per directed by Engineer In-

4 Providing and fixing screw down bib taps of 42.00 186.83 No

following size.(B) Brass chromium plated

screws down Bib Tap. (i) 15mm dia.

5A Providing & fixing to wall, ceiling and floor of 30.00 72.65 Rmt

nominal diameter UPVC(Medium grade) tubes

Finolex Or equivalent make of 40 sch. Including

cost of all fittings of Finolex Or equivalent

make and clamps including making good the

wall, ceiling and floor with necessary testing of

leakage etc complete as directed by Engineer

in charge (a) 15 mm dia

5B (b) 25 mm dia 30.00 91.84 Rmt

5C (c) 32 mm dia 30.00 119.15 Rmt

5D (d) 40 mm dia 30.00 148.12 Rmt

6 Providing and fixing P.V.C Nahni trap of 75 mm 42.00 547.22 No

dia inlet and 75 mm dia outlet nominal diameter

of self cleaning design with Stainless Steel

grating including fixing P.V.C. reducer of

mm dia to 75 mm dia and jointing with adhesive

, cutting and making good the walls and floors

etc complete as directed by Engineer in charge

7 Providing and fixing S.W. Gully trap of 150mmx 18.00 1246.92 No

100mm ‘P’ or 'R' type with C.I. grating brick

masonry chamber and water tight C.I. cover

with frame 300 mm x 300m size (inside) with

standard weight etc complete as directed by

Engineer in charge

8 Providing, laying and jointing in true line and 30.00 835.15 Rmt

level 110 6kg/rmt diametre P.V.C (Type B)

conforming to IS 13592-1992 with one end

plain and other end socketed with rubber ring,

& fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line,

pipe shall be jointed with each other with

rubber lubricant, pipe shall be fixed on wall

using of PVC clamp of the size 110mm

diametre x 149 mm length x 145 mm heigh at

every 2000 mm center to center or shall be

concealed in walls as directed including

necessary fittings such as bends, shoes etc.

including testing of pipes and joints and jointed

with adhesive solvent cement including cost of

9 Providing, laying and jointing in true line and 30.00 831.22 Rmt

level 160/6kg/rmt diametre P.V.C conforming

to IS 13592-1992 with one end plain and other

end socketed with rubber ring, & fittings

conforming to ISI 14735-1999 of approved

make for drainage system pipe line, pipe shall

be jointed with each other with rubber lubricant,

pipe shall be fixed on wall using of PVC clamp

of the size 160mm diametre x 210 mm length x

196 mm heigh at every2000 mm center to

center or shall be concealed in walls as

directed including necessary fittings such as

bends, shoes etc. including testing of pipes and

joints and jointed with adhesive solvent cement

including cost of all materials.

10 Providing & fixing on wall face 90mm dia PVC 200.00 397.33 Rmt

rainwater pipe of “Finolax or eqv. make”

kg/s.mt with top and bottom el-bow necessary

coupling if any incl. filling the joints with

adhesive & water tight with PVC clamps at

every 1.50m testing etc complete as directed

by Engineer in charge.

11 Providing and fixing pre-cast Rubber Dye / 330.00 686.90 Smt

steel Dyeinter locking concrete block 60mm

thick with grade ofconcrete M300 pnumatic

compressed / vibratedmechanically and as per

approved design Confirmingto IS 15658 :

including 35 mm Sand layer forlevelling and

filling the joint with sand in proper lineand level

as per guidelines of IRC : SP 63-2018 etc.

SUB ESTIMATE NO.3 Total

SUB ESTIMATE NO.4 :- PROVIDING & FIXING G.I. SHEET ROOFING FOR ALL CAMPUS LOBBY AT

J.A.U., JUNAGADH

1 Demolition of R.C.C. Work incl. stacking of 680.00 1030.81 Cmt

serviceable material & disposable of

unserviceable material with all lead & lift.

Etc. Comp. as directed by E.I.C

2 Dismantling of old cement plaster incl. 1120.00 50.50 Smt

scraping of wall, incl. stacking of

serviceable material & disposable of

unserviceable material with all lead & lift.

Etc. Comp. as directed by E.I.C.

3 Providing & fixing 0.5mm thick color 3120.00 759.11 Smt

coated high profile semi corrugated

Galvoaluminium sheets roofing (ISI

Approved make) Round/Curved Shep

roofing fixed with G.I. hubs & screws with

plain & bitumen washer and general

practice for fixing the etc. comp.up to 40 mt

span and excluding the cost ofn purlin &

truss incl. the ends & sides lap shall be

provided as per detail drawing ,design &

etc. comp. as directed by E.I.C

4 Providing and fabricating and fixing square 87360.00 139.04 Kg

CRC pipe for gate, railing, dome structural

work, truss Purlin etc including fabricating,

hoisting fixing in position with angle cleats,

as Per design, applying one coat of red

oxide primer and two coats synthetic

enamel oil paint of approved quality and

shade scaffolding etc complete as directed

by Engineer in charge

5 Providing, laying & casting ordinary cement 30.00 6346.50 Cmt

concrete 1:1.5:3 mix ( 1 cement :

coarse sand: 3 graded stone aggregate

20mm nominal size of B.T. Kapchi ) for

R.C.C. Coping etc including cost of

formwork centering shuttering scaffolding

curing compacting with vibrators etc

complete incld. Finishing the exposed face

even and smooth with C.M. 1:3 ( 1 cement :

3 sand) but excluding the cost of

reinforcement as directed by Engineer in

6 Providing & applying 20mm thick sand 1300.00 329.37 Smt

face cement plaster on walls surface or any

surface up to any height above G.L

consisting of 12mm thick backing coat of

C.M. 1:3 ( 1 cement : 3 sand) and 8mm

thick finished coat of C.M. 1:1 (1 cement :

1 sand) including cost of scaffolding curing

etc. complete as directed by Engineer in

7 Providing & Applying Finishing wall with 1300.00 115.68 Smt

weather proof exterior emulsion paint on

wall surface ( Two coats ) surface to give

an even and smooth on wall surface

including repairing Patch after thoroughly

brushing the surface free from mortar drops

and other foreign matter and also incl.

preparing the surface even & smoothed,

complete as directed by Engineer in-charge

SUB ESTIMATE NO.4 Total

Sr. Description Amount

1 SUB ESTIMATE NO.1 (A) :- REPAIRING & RENOVATION OF OLD

NIVEDITA GIRLS HOSTEL FOR COLLEGE OF AGRICULTURE AT

J.A.U., JUNAGADH & SUB ESTIMATE NO. 1 (B) :- ELECTRICAL

INSTALLION OF OLD NIVEDITA GIRLS HOSTEL FOR COLLEGE OF

AGRICULTRURE AT J.A.U., JUNAGADH

2 SUB ESTIMATE NO. 2 :- REPAIRING & RENOVATION OF VIVEKANAND

BOYS HOSTEL OF C.A.E.T. AT J.A.U., JUNAGADH

3 SUB ESTIMATE NO. 3 :- REPAIRING & RENOVATION OF VISHVAKARMA

HOSTEL AT J.A.U., JUNAGADH

4 SUB ESTIMATE NO.4 :- PROVIDING & FIXING G.I. SHEET ROOFING FOR

ALL CAMPUS LOBBY AT J.A.U., JUNAGADH

(Rupees Three Crore Eighty Six Lakh(s) Three Thousand(s) Seven Hundred Fifty Seven And Paise

Twenty Two Only)