GENERALFeroke Railway Over Bridge- Providing street light fittings in attached road of

Amount

Feroke Railway Over Bridge-Providing street light fittings in Railwayover bridge and attached road

90.15.1.1:Supply installation testing and commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70mm top diameter. 130mm bottom diameter thickness 3mm base plate dimensions of 200x200x16mm suitable for windspeed as per IS 875 Part III fixed head frame including round arm luminary carriage suitable to install 4/6 nos luminaries in symmetrical arrangement including connector foundation bolt 4 nos existing RCC foundation and junction box etc, complete 8 Meters

90.15.4.8:Supply Conveyance, installation, testing and commissioning of 120W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

OD105056/2025-2026:Supply installation testing and commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70 mm top diameter, 130 mm bottom diameter thickness 3mm base plate dimensions of 200x200x16 mm suitable for wind speed as per IS 875 Part III single arm bracket 1 mt including connector foundation bolt 4 nos fixed in existing RCC foundation and junction box etc. complete 8 Meters

OD15346/2024-2025:Supply installation testing and commissioning of 7 meter GRP pole 89 mm top diameter, 162 mm bottom diameter thickness 3mm base plate dimensions of 300x300x12 mm suitable for wind speed as per IS 875 Part III single arm bracket 1 mt including connector foundation bolt 4 nos fixed in existing RCC foundation and junction box etc. complete 7 Meters make of Sumip, Fiber,ercon or equivalent.

OD220721/2023-2024:Supply of 120w(+/-3w) LED Streetlight with minimum 16,800 Lumens light output in 5700K CCT, Greater than 140 Lumens per watt system efficacy using high power LED having minimum 75,000 burning hours as per L70. The driver shall have 140-270 Operating voltage range and 440V withstand capacity for min 8 hours. THD <10% and Power factor 0.95. The housing shall be made of LM6 grade single piece pressure diecast aluminium housing having 500hours NSS salt spray tested finish and Polycarbonate cover made using injection moulding with lens to achieve IP66 with IK10 Protection. The luminaire and Driver shall be saperately BIS Approved of same brand equivalent of Philips BRP503 LED168 CW R3C PSU S1 SPD or Techno commercial equivalent in Kesslec or Osram only.

90.6.5.11:Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 1.50 sq mm

90.12.5.2:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.2 core 6 sq mm

90.12.5.3:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.2 core 10 sq mm

OD221034/2023-2024:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required. 2 core 16 sq mm

90.16.1.2:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG)

9.1.1:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 6 sq. mm (19mm)

9.1.2:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 10 sq. mm (19mm)

9.1.3:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 16 sq. mm (22mm)

OD105156/2025-2026:Supply and fixing 6 pole bakelite terminal connector for cable termination .

90.16.5.2:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.65 mm (12 SWG)

OD221819/2023-2024:Supplying, fixing and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in surface. 40/32 mm or nearest size

OD221660/2023-2024:Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation 40/32mm or nearest size

90.14.1.1:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 2.00mm CRCA sheet, powder coated (excluding base frame)

90.14.2.1:Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.

90.14.3.1:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardA' section neoprene beeding suitable for 1.60/ 2.00 mm sheet

90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

90.14.7:Supply and providing copper earth bus in the panel board

5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

OD221254/2023-2024:Providing and fixing 25 mm X 3 mm G.I. strip earth lead from the test joint to the earth plate

OD221255/2023-2024:Providing and fixing 2 X 25 mm X 3 mm G.I. strip test joint for earthing system

90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)

90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)

OD221256/2023-2024:Supply and providing 25x6mm brass nut and bolt etc. as required

OD221257/2023-2024:Supply and providing 25x3mm brass nut and bolt etc. as required

OD220968/2023-2024:Supply and fixing 32A Fuse base with HRC fuse link in the existing meter board and giving connections etc.

OD221454/2023-2024:Supply and fixing 32A, 2 way neutral link mounted on DMC/ SMC base in the existing box and giving connections etc. as required

OD221466/2023-2024:Providing and fixing following capacity SP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.32 Amp SP & N

1.17.20:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 4 sq. mm

1.17.1:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.1 x 1.5 sq. mm

1.17.29:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 6 sq. mm

1.21.1:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

OD223891/2023-2024:Supplying and providing 20 mm Corrugated PVC flexible conduit as required.

90.3.17.1:Supply, conveyance and erection of the following sizes of 'B' class GI pipe in single section for post top lantern of all types on concrete base (excluding charges for concrete base and excavation) and painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer etc. as required.32 mm dia GI pipe

2.10.3:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, ""C"" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double pole

2.10.1:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, ""C"" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

2.14.1:Supplying and fixing following rating, double pole, (single phase and neutral),240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 25 amps

OD65421/2025-2026:Supplying and fixing 24Hours Digital Time Switch for operating ON-OFF function in the existing MCB DB/enclosure complete with connections, testing and commissioning etc. as required. (L&T make Digital Time switch 2 module cat no 67DDT0 or Techno Commercial equivalent approved by engineer in charge)

OD220966/2023-2024:Supplying and fixing 40A, Two pole, 240 volts L&T make (AUC00204000)/equivalent 2way center OFF MCB type Change Over Switch in the existing MCB DB complete with connections, testing and commissioning etc. as required.

OD220970/2023-2024:Supplying and fixing 25A 2Pole AC-1 contactor complete with connections, testing and commissioning etc. as required. (L&T make AC-1 contactor cat no MNS25,product code CS90240 or Techno Commercial equivalent approved by engineer in charge)

OD224074/2023-2024:Supply and fixing following rating Surge Protection Devices (1P+N) ,Conforms to IEC 61643-11, Type 1+2(Protection against direct and indirect lightning surges) , Maximum Discharge Current - Imax up to 100 kA in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. (Make L&T or Techno commercial equivalent)

14.1:Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres.

OD66397/2025-2026:Steel reinforcement for RCC Work including straightening, cutting, bending, placing in position and binding all complete.

OD85671/2025-2026:Supply and fixing MS sheet of size 12 mm including straightening, cutting, bending, drilling holes,and welding, placing in position and painting anti rest-coat of enamel paint all complete as per the direction from the engineer in charge,including Supply, fixing 16 mm / suitable size G.I. nuts and through bolts with washer as per instruction from Engineer in charge in existing Civil structure after Drilling Holes with suitable size and without any damage.

OD227647/2023-2024:Supply and fixing of Threaded rod of 8.8 Grade M16 size in 1000mm length . The bolt shall be drilled horizondaly across the concrete side wall and including 2 nuts washers etc,as per the direction from department staff at site.

OD224039/2023-2024:Cutting the asphalt/tiled/concrete for laying pipes/cables including making good the surface etc. as required

14.8:Providing and laying in position cement concrete 1 :3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required.

14.12:Providing 15mm thick cement plaster of mix 1:4(1 cement: 4 fine sand) at all levels

OD83221/2025-2026:Fabrication, supply conveyance and installation of name board by using granite stone with inscriptions of scheme and the required names etc. on pole using angle iron frame work and making good the surface colour washing etc as required. (size not less than 60x45cm)

PRADEEP KUMAR.V.K (BID ID -2261913)

candelaengineering corporation (BID ID -2262017)

gopakumar.kv (BID ID -2261994)

KELTRON LIGHTING DIVISION (BID ID -2262078)

Bidder Name

gopakumar.kv

PRADEEP KUMAR.V.K

SAJITHLAL K

candelaengineering corporation

KELTRON LIGHTING DIVISION