Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.4 CrAccepted-AOC H NO 685 NEAR GOVT SR SEC SCHOOL PAKASMA ROHTAK HR 124401 | PAKASMA | ROHTAK | HARYANA | 124401 | ₹2.4 Cr | L1 | Accepted-AOC done |
| 2 | L2₹2.5 Cr+₹8.1 L (3.42%)Rejected-Finance 86 SECTOR 07 URBAN ESTATE KURUKSHETRA | ₹2.5 Cr+₹8.1 L (3.42%) | L2 | Rejected-Finance Rejected |
| 3 | L3₹2.7 Cr+₹36.7 L (15.5%)Rejected-Finance SCF 44 MODEL TOWN NARWANA 126116 | JIND | HARYANA | 126116 | ₹2.7 Cr+₹36.7 L (15.5%) | L3 | Rejected-Finance Rejected |
Tender Value
₹2.1 Cr
EMD Value
₹4.1 L
Closing Date
22 Jun 2021, 12:00 pmClosed
Executive Engineer SYL WS Division Ambala
Executive Engineer SYL WS Division Ambala
Construction of RCC open trough from RD 22590 to 24190 of Ambala Drain including remodeling of 02 nos. bridges
2021_HRY_175846_1
22/06/2021
Open Tender
Civil Works
Item-rate/Agreement basic
240 days
Ambala
Please refer Tender documents.
2 documents required · 2 mandatory
₹15,000
Yes
₹4.1 L
Yes
26 Jul 2021
15 Jun 2021
22 Jun 2021
15 Jun 2021
22 Jun 2021
15 Jun 2021
Amount
Cement Lime Concrete 1:2:9:24, 0.041 cum cement, 0.082 cum lime, 0.37 cum sand and 1.00 cum stone aggrgate, 40 mm nominal size in foundation and plinth
Design mix concrete of grade M15 with minimum cement contents 240/Kg/cum in foundation and plinth
Providing and laying in position machine mixed M-30 with minimum cement contents 340 Kg/cum in foundation and plinth
First class brick work laid in cement sand mortar 1:3 in foundation and plinth
Steel Reinforcement TMT bars FE-500 EQR/FE-500 D grade or more for RCC work, where not included in the complete rate of RCC including Strenghtening, bending, binding, wastage, overlap, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc for all heights/depths/storeys/basements etc
Centring & shuttering for faces of wall, partition, retaining walls, well stening and the like (vertical or battering) including attached pilaster, buttresses etc
Centring and shuttering for slab of culverts excedding 3 mtrs but upto 6 mtr span
Shuttering for faces of concrete foundation and foundation beams (vertical or battering)
Providing PVC pipe Weep Holes of 4" Dia both side with plugging by cement concrete mix including perforated cap
Earth work excavation in dressed soil exclusive of compensation of earth with all leads and lifts including breaking of clods
Extra for slush
Earth work in compaction as per specification for compactionn in 25cm layer & dressing but excluding cost of rolling
Earth work in filling including of all lead and lift loading unloading & dressing including compensation for earth taken from private land
Dismantling reinforced brick/reinforced concrete work including reinforecment with cleaing and straightening and cutting of bars if required
Dismantling brick work tile masonry or tile lining and tile terracing in cement
Dismantling of Cement Concrete plain 1:3:6 mix
12 mm thick cement plaster in 1:3 on walls
Supply and carriage of EC bags
Filling EC Bag with sand/Earth Laying in position within 30 mtr lead in water i/c cost of string
Providing and Fixing PVC Water Stop Seal for Wall of size 225/230 mm wide x 8 mm thick
Providing and Fixing PVC Water Stop Seal for Base of size 300 mm wide x 10 mm thick
Supply and Fixing Non Woven Geotextile 300 GSM behind vertical wall
Compensation of earth
Providing, lowering, laying, cutting (cut surface to be uniformaly finished) jointing with rubber ring marked with IS 5382 and testing of spigot and socketted RCC NP2 of 600 mm dia marked with IS: 458-1988 and special into trenches for all depths including carriage loading ,unloading stacking ,handling, re-handling ,etc complete in all respect to the satisfaction to the Engineer-In-Charge
Providing lowering laying cutting jointing and testing RCC 600 mm dia pipe class NP3 as per 458-2003 with spigot and socketed joint manufactur ISI marked sulphate resistance cement as per ISI 12330 with rubber ring with ISI mark antitermite as required at site into trenches for all depth and laying out the same to correct aligment, gradients and level including dressing and trimming and cutting of concrete beds and sides of trenches if required jointing with Rubber ring in trenches and jointing with 1:1.5 cement sand mortar and with end dowels filled with 1:1.5 cement sand mortar and finishing the joint at an angle of 45 degree with faces of spigot and socket joints cutting and finishing the cut surface to uniform finish etc as fully described in HSR item no,. 29.38, 29.40,29.45 & 29.46 including cartage, loading and unloading complete in all respect
Wrought iron and mild steel (using angles, flats, square bars, Tee And channels) ladders grills, grating frames, window guards, iron doors openable or fixed staircase or Parapet or any other type of railing, gates and tree guards etc. including cost of screws and welding rods or bolt and nuts complete fixed in position
Applying Priming coat with metal primer on new steel or iron work including preparation of surface
Painting two coats excluding priming coat with ready mixed paint for metallic surfaces in all shades on new steel or iron work.
Removing of hume Pipe NP-2 and NP-3
Supply and fixing of PVC Pipe ISI 8'' dia for diversion of the drain
Credit of RCC NP-2 Pipe 600 mm dia
Credit of RCC NP-3 Pipe 600 mm dia
Credit of PVC Pipe 8'' dia
Credit of Brick Work
Krishna Construction Co
TEJWANT RAI GOVT CONTRACTOR
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .