Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹1.4 L
Closing Date
26 Nov 2026, 2:30 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Single Packet
Normal Tender
No
Itemwise/Consigneewise
Lowest to Highest
TPI Agency
Not Applicable
Expenditure
General
05
1 condition · 1 needing a document upload
1) As per Clause 2.13.6 of RCF Bid Document (Version-14.0) as read with all Corrigenda issued till opening of tender. 2) Similar mean: Partition frames / Door frames / Modular Frames / Side Wall / Roof / Lavatory Side Wall / End Wall for Any LHB/ Vande Bharat / Vande Metro/3- Phase MEMU Coach individually OR as Components of Kits/Assemblies. Estimated Value = Rs. 71,36,640/-
18 conditions
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Inspection By TPI.
Quantity Splitting : As per Clause No. 2.17.2 of Bid Document Version 14.0 OR latest with all corrigendum and amendments if any issued before opening of tender.
WARRANTY : AS PER IRS CONDITIONS.
PACKING : APPLICABLE AS PER PACKING INSTRUCTION NO. PI226.
PILOT SAMPLE : THE FIRM IS REQUIRED TO GET PILOT SAMPLE APPROVAL BEFORE BULK SUPPLY.
1 condition
Validity of Offer: No deviation from the offer validity period stipulated in the tender is permitted.
1 location across Punjab · 64 Set total
SET OF BOLTED PARTITION FRAME
05261590A~RCF
05261590A
Open - Indigenous
Goods
Punjab
₹0
₹1.4 L
27 Oct 2026
27 Oct 2026
1 item · 64 Set total
SET OF BOLTED PARTITION FRAME FOR NON AC CHAIR CAR FOR BANGLADESH COACHE S.(Note MAKE/MANUFACTURER OF RAW MATERIAL SHALL BE M/s JSL ORM/s SAIL.), as per Drawing: MP 26PECB VERSION:1,Packing Instruction: PACKING CONDITION OF SET OF PARTITION FRAME AND PROC EDURE TO ACHIEVE BEST POSSIBLE PROTECTION DURING TRANSPORTATION:1. SURFACE PREPARATIO N:THOROUGHLY CLEAN THE COMPONENTS TO REMOVE ANY DIRT, GREASE OR CONTAMINANTS -APPLY A PROTECTIVE FILM, SUCH AS PVC OR LASER FILM OR BUBBLE SHEET, TO SHIELD SURFACES FROM SC RATCHES AND ENVIRONMENTAL FACTOR.2.PACKING MATERIALS:-WOODEN CRATES: CONSTRUCT STU RDY WOODEN CAGE TAILORED TO THE COMPONENT'S DIMENSIONS.STEEL STRAPPING: UTILIZE RUST- PROOF STEEL STRAPS TO SECURELY BUNDLE COMPONENTS, PREVENTING MOVEMENT DURING TRANS IT.3.MOISTURE BARRIER:-INCORPORATE MOISTURE-PROOF MATERIALS, SUCH AS PLASTIC FILM OR WA TER PROOF ABILITY PAPER, TO GUARD AGAINST CORROSION.4.COMPONENT ARRANGEMENT:-PLACE C OMPONENTS ON WOODEN PALLETS OR WITHIN CUSTOM-DESIGNED SUPPORTS TO DISTRIBUTE WEIGH T EVENLY AND PREVENT DEFORMATION.-ENSURE THAT NO PART OF THE COMPONENT EXTENDS BEYO ND THE PROTECTIVE PACKAGING TO AVOID EXPOSURE TO POTENTIAL DAMAGE.5.SECURING THE COM PONENTS: -USE STEEL STRAPS OR ROPES TO FIMLY ANCHOR THE COMPONENTS WITHIN THE WOODEN CRATE, MINIMIZING INTERNAL MOVEMENT. -FOR ADDED STABILITY, EMPLOY BRACING OR CUSHIONIN G MATERIALS, SUCH AS FOAM PADS OR CORRUGATED INSERTS, TO FILL VOIDS AND ABSORB SHOCKS. -HARDWARE ITEMS TO BE SUITABLY PACKED SEPARATELY INSIDE THE CRATE.6. LABELING AND DOCU MENTATION:-CLEARLY LABEL EACH PACKAGE WITH ESSENTIAL INFORMATION, INCLUDING PL NO. SPEC IFICATIONS, DETAILS OF EACH SET WITH QTY. AND ALSO KEEP ONE COPY INSIDE OT THE CRATE, WEIG HT, HANDLING INSTRUCTIONS AND FIRM'S & DESTINATION DETAILS.7.LOADING ONTO TRAILER/LORRY/TRUCK/TRANSPORT:- STRATEGICALLY POSITION THE PACKAGED COMPONENTS WITHIN THE TRUCK/SUITABLE TO MAINTAIN BALANCE AND PREVENT SHIFTING DURING TRANSIT.-SECURE THE PACKAGES TO THE CONTAINER'S STRUCTURE USING LASHING TIES OR ADDITIONAL BRACING AS NEED ED. 8.FINAL INSPECTION AND SEALING:-CONDUCT A THOROUGH INSPECTION TO VERIFY THAT ALL CO MPONENTS ARE SECURELY PACKED AND THAT PACKAGING MATERIALS ARE INTACT. [ Warranty Peri od: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SHELL DEPOT, RCF | Punjab | 64.00 Set |
| Total | 64 Set | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
5942854.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .