PROVN OF PARKING SHED AT MILITARY STN AND AF STN UNDER GE MISSAMARI

Amount

Surface dressing n exc 15cm deep in soft/loose soil complete all as specified as directed.

Excavation in trenches in soft / loose soil not exceeding 1.5 metre wide for foundation etc or for shafts, wells cesspits, manholes etc not exceeding 10 Sqm on plan and not exceeding 1.5 metre in depth and getting out as directed by the Engineer-in-Charge.

M&L Cement concrete type (1:4:8) (40 mm graded aggregate ) as in foundations, filling and mass concrete

M&L Cement concrete type (1:3:6) (40 mm graded aggregate ) as in foundations, filling and mass concrete

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point in soil.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.

M & L for burnt brick work with sub class `B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 all as specified and directed.

Material and labour for 150mm thick PCC 1:4:8 type D2 as in sub base of floor complete all as specified and as directed.

Material and labour for 100mm thick PCC 12:4 type B2 as in sub base of floor/Floor complete all as specified and as directed.

M&L 15mm thick cement plaster on brick or concrete walls finishing fair and even in CM 1:4complete all as directed.

Preparation of new plastered surfaces and applying three coats of white wash on wall all as specified and directed.

M&L for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410 -W (Gde-E-250) quality-B complete all as specified and as directed.

M & L for plate (plain or chequered) Channel, square cut or notched forming holes without any attachment complete all as specified and as directed.

M&L for hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete and screwing etc. wind ties(FI 40X6mm) for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 complete all as specified and directed.

S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheetng 0.50mm thick of an colour having tensile strengthof 550 Mpa as in roof covering/cladding to wall ,fixed with self tapping screws as specified.

S & F of pre-painted color galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

M&L for preparation of new surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for preparation of new surfaces of steel or iron surfaces of any description, nexc 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L Pre-cast Reinforced Cement Concrete 1:2:4 (20mm graded aggregate) in Cover Slab for drain cover, Manholes, Septic Tanks, etc., set in Cement Mortar 1:4 including necessary forms, moulds, etc., complete all as specified and as directed.

M&L TMT Bars 10mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for Columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and as directed.

M&L for plain cement concrete 1:2:4 type B2 using 40mm graded stone aggregate as in foundation complete all as specified and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240, and including nut bolt and MS plate etc, complete all as specified and as directed.

S&F for flat iron of size 40x6 mm as in wind ties confirming to Fe -290 Gde E-165 complete all as specified and directed.

S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes double socketed in any length with rubber ring joints fixed in walls complete all as specified and directed,

S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed,

S&F for 1mm thickness plain galvanised mild steel sheeting in ridges hips vally gutters drip and straight flashing (length and girth as fixed) with grade of zink coating 275, complete all as specified and directed.

BEE KAAY TRADERS

Sunrise Enterprise

MAA CONSTRUCTION

M/S Krishna Construction Co.

United Traders

Markson

shree kamakhya traders