CONSTRUCTION Of SKATING RINK & BOX - CRICKET AT NARODA-2 T.P.S NO-40,F.P NO-35

Name of Work: CONSTRUCTION Of SKATING RINK & BOX -CRICKET AT NARODA-2 T.P.S NO-40,F.P NO-35

Volume -II Financial BID

Ahmedabad Municipal Corporation

Rajiv Gnadhi Bhavan

Memco, Ahmedabad-382345

AHMEDABAD MUNICIPAL CORPORATION

MAHANAGAR SEVA SADAN - NORTH ZONE

Name of Work: CONSTRUCTION Of SKATING RINK & BOX -CRICKET AT NARODA-2 T.P.S NO-40,F.P NO-35 Bill of Quantities

SR. TOTAL SOR RATE

ITEM DESCRIPTION UNIT AMOUNT

NO. QTY 2024-25

Excavation for foundation upto 1.5 m

depth including sorting out and stacking

1 of useful materials and disposing off the cmt 1968.00

excavated stuff upto 50 Meter lead.(A)

Loose or soft soil

Excavation for foundation for depth from

1.5 mt 3.0 m including sorting out and

2 stacking of useful materials and cmt 273.00

disposing off the excavated stuff upto

Meter lead.(A) Loose or soft soil

Conveyance charges of earth lime,

murrum, building rubbish, manure,

3 garbage, sludge, excavated rock, fly ash, cmt 220.00

aggregate of any kind etc. comp. upto

Extra For Lead Above 5 km &upto 6 km cmt 44.00

Extra For Lead Above 6 km &upto 7 km cmt 44.00

Filling available excavated earth

(excluding rock) in trenches. plinth, sides

of foundations etc. in layers not

exceeding 20 cm. in depth consolidating

each disposited layer by ramming and

Filling in plinth with sand under floors

5 including watering ramming, cmt 228.00

consolidating and dressing complete

Filling in foundation and plinth with

murrum or selected soil in layers of

6 20cm. thickness including watering, cmt 228.00

ramming and consolidating etc.

Carring out plinth treatment to post

construction /existing structure by

spraying chemical solution for termite

control treatment including labour and

material consistment with I.S.I

specification. Using Chlordene and

Chiorpurfiles 20 EC. As Per 6131_paret-II

Consentration Weight one percent is

recommended i.e one litre 20 EC

chemical emulsion with 19 liter give 1%

concrentration inclusive of one litre

chemical emulsion appication at the rate

of 5 Litre chemical /Sqm of sur face is

recommended as per I.S

Providing and laying cement concrete

1:3:6 (1-Cement:3-coarsesand:6-hand

broken stone aggregates 40mm nominal

size)and curing complete excluding cost

of formwork in (A) Foundation and

Providing and laying controlled cement

concrete M.250 and curing complete

excluding the cost of formwork and

reinforcement for reinforced concrete

work in (A) Foundations, footings, Base

of columns and Mass concrete. FOOTING

Providing and laying controlled cement

concrete M.250 and curing complete

excluding the cost of formwork and

10 reinforcement for reinforced concrete Cum 34.00

work in (A) Foundations, footings, Base

of columns and Mass concrete. BELOW

Providing and laying controlled cement

concrete M.250 and curing complete

excluding the cost of formwork and

11 reinforcement for reinforced concrete Cum 23.00

work in (D) Columns, Pillars posts and

struts, upto floor two level.GROUND

FLOOR ABOW PLINTH COLUMN

Providing and laying controlled cement

concrete M.250 and curing complete

excluding the cost of formwork and

reinforcement for reinforced concrete

Slabs,landing,shelves,Balconies, Lintels,

Beams, Girders and Cantilever upto floor

two level. plith beam

Providing and laying controlled cement

concrete M.200 and curing complete

excluding the cost of formwork and

reinforcement for reinforced concrete

Slabs,landing,shelves,Balconies Lintels,

Beams, Girders and Cantilever upto floor

two level. GROUND FLOOR

Providing TMT Bar FE 500D

reinforcement for R.C.C. work including

bending, binding and placing in position

complete upto floor two level

Providing formwork of ordinary timber

planking so as to give a rough finish

including centering shuttering strutting

and propping etc. Height of propping and

centering below supporting floor to

ceiling not exceeding 4 M. and removal of

the same for in situ reinforced concrete

and plain concrete work in. (A)

Foundations Footings Bases of Columns

etc. and Mass concrete. FOOTING

Providing formwork of ordinary timber

planking so as to give a rough finish

including centering shuttering strutting

and propping etc. Height of propping and

centering below supporting floor to

ceiling not exceeding 4 M. and removal of

the same for in situ reinforced concrete

and plain concrete work in. (B) Flat

surfaces such as soffits of supspened

floors slabs Landings and the like. (1)

Floors etc. upto 200 mm in thickness.

Providing formwork of ordinary timber

planking so as to give a rough finish

including centering shuttering strutting

and propping etc. height of propping and

centering below supporting floor to

ceiling not exceeding 4 M. and removal of

the same for in situ reinforced concrete

and plain concrete work in. (G) Columns

PillarsPosts and struts. (1) Square

Rectangular Polygonal in plan. COLUMN

Providing formwork of ordinary timber

planking so as to give a rough finish

including centering shuttering strutting

and propping etc. height of propping and

centering below supporting floor to

ceiling not exceeding 4 M. and removal of

18 the same for in situ reinforced concrete Smt 562.00

and plain concrete work in. (H) (2) Sides

and soffits of Beams Beam

Haunchingscanti-levers Girders

Bressumers and Lintels exceeding 1M.in

Depth.PLINTH BEAM & SLAB BEAM &

Brick work using common burnt clay

building bricks having crushing strength

19 not less than 35 kg./Sq.Cm. in foundation Cum 10.00

and plinth in Cement Mortar 1:5. (1-

Cement : 5 -fine sand)(B)Conventional

Brick work using common burnt clay

building bricks having crushing strength

not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:5. (1-

Cement : 5 -fine sand)(B) Conventional

Extra for brick work in superstructure

above plinth level upto floor two level

(B) Conventional : Ground Floor

(i) Half brick masonry in common brunt

clay building bricks having crushing

strength not less than 35 Kg/Sq.Cm. in

Cement mortar 1:4 (1- Cement : 4 -

21 coarse sand ) in foundation and plinth Smt 23.00

(B) Conventional Extra for half brick

masonry in superstructure above plinth

level upto floor two level. (B)

Conventional GROUND FLOOR

Providing 15mm thick cement plaster in

single coat on Rough (Similar)side of

single or half brick walls for interior

22 plastering upto floor two level and Smt 60.00

finished even and smooth in (ii) Cement

mortar 1:4 (1-cement :4-sand) GROUND

Providing 10mm thick cement plaster in

single coat on brick/concrete walls for

interior plastering upto floor two level

and finished even and smooth in (ii)

23 Cement mortar 1:4 (1- cement :4-sand) Smt 31.00

Extra over items 58 to 71 for plastering

on ceilings and sofits of stairs up to floor

two level instead of plastering on

Providing 20 mm thick double coat mala

cement plaster on interior brick /

concrete work for plastering comprising

of base coat of 12 mm thick cement

plaster in cement mortar (1 Cement :

coarse sand) in rough finishing and 8 mm

thick top coat of cement mortar 1:2 (1

Cement : 2 Coarsesand) finished with

trovel including scaffolding curing etc.

20mm thick sand faced cement plaster

on walls upto height 10 metres above

ground level consisting of 12mm thick

backing coat of C.M. 1:3 (1-cement : 3-

sand) and 8mm thick finishing coat of

C.M. 1:1 (1-cement : 1-sand) etc.

Providing and applying 2mm thick

Texture Plaster Terre Plaette (Specturm

Coral or equivalent) incoprating fine

fillments made of polymer and

aggergating natural stone powder with

26 making grooves on base coat of 20 mm Smt 137.00

thick smooth mala plaster (which paid

seperately) etc. complete.Colour and

shade as approved by Architect/

Engineer in charge for at all floor ,all

Providing cement vata (10cm. x 10 cm.

size) quarter round in cement mortar 1:1

including neat cement finishing, watering

Applying two coats of putty & two coats

of primer of approved brand and

manufacture on new wall surface to give

28 an even shade including thoroughly Smt 91.00

brushing the surface free from mortar

dropping and other foreign matter and

sand papered smooth.

Wall painting (two coats) with plastic

emulsion paint of approved brand and

manufacture on undecorated wall

29 surface to give an even shade including Smt 91.00

throughly brushing the surface free from

mortar droppings and other foreign

matter and sand papered smooth.

Finishing wall with weather proof

exterior emulsion paint on wall surface

(two coats) to give an required shape

even shade after thoroughly brushing the

surface to remove all dirt, and remains of

loose powdered materials.etc complete

Providing and laying Ceramic tiles 6mm

thick in flooring treads of steps and

landing laid on a bed of 12mm thick

cement mortar 1:3 (1-cement : 3- coarse

sand ) finishing with flush pointing in

P & L 24" x 24" vitrified 8 mm thick tile

flooring over 20 mm (average) base of

cement mortar 1:6 ( 1 cement: 6 coarse

sand) on new surface or fixing on

existing flooring by adhesive material

including dismentaling of existing

flooring and jointed with color cement

slurry including finised with flush

pointing & cleaning the surface etc.

complete for light shade

P&L 24"x24" vitrified 8mm thick tile

flooring over 20mm (average) base of

cement mortar 1:6 (1cement :6 coarse

sand) on new surface or fixing one

xisting flooring by adhesive material

including dismentaling of existing

flooring and jointed with color cement

slurry including finised with flush

pointing & cleaning the surface

etc.complete for antiskid

Providing and laying white glazed tiles

6mm thick in skrting risers of steps and

34 dedo on 10 mm thick cement plaster Smt 35.00

1:3(1-cement :3-coarse sand)and jointed

with white cement slurry

Providing and laying Granite slab (18

mm thick) one side polished flooring

over 20 mm (average) base of cement

35 mortar 1:6 (1 cement : 6 coarse sand) or Smt 50.00

L.M 1:1.5 laid and jointed with grey

cement slurry including rubbing and

polishing complete.

Providing and laying 18 mm thick

polished granite stone machine cut in

single piece (Max. available) in sill and

jambs of door ,window,ventilation& lift

wall cladding,staircase flooring landing,

risers & treads, skirting laid over 10 mm

thick cement mortar 1 : 3 (1 cement :

coarse sand) and jointed with grey

cement slurry with matching pigment

incl. rubbing and polishing,half rounding

edge and incl. fixing of hilty fastener at

every 1/3 span of sill as required size etc.

complete colour and shed as approved by

architect engineer in charge.

Providing and fixing M.S. grills of

required pattern to wooden frames of

windows etc. with M.S. flats at required

spacings and frame alround, square or

round bars with round headed bolts and

nuts or by screws (A) Plain Grill.

Providing and fixing standared extruded

of alluminium section of size 63mmx

38 with colour anodized alluminium frame Smt 1.00

for ventilation with 5mm thick frosted

glassas details etc complete for

Providing and fixing window having

extruded aluminum Colour Powder

Coated section frame main outer size

Rmt, horizontal two track member size

0.695 Kg/mt, vertical member of size

0.0.659 Kg/mt with sliding shutters of

39 horizontal member size 40mm x 18mm x Smt 4.00

1.29mm @ wt.of 0.456Kg/mt, vertical

member of size 40mm x 18mm x 1.29mm

@ wt.of 0.456Kg/mt with 5 mm thick

transparent bronze colour tinted float

glass with powder coated aluminum

fittings and fixtures and transparent

silicon sealant glass fixing to frame as per

complete for window

Providing and fixing flush door both

sides laminated and I.T.W. beading all

around by using I.T.W. frame 120 m.m. x

80m.m.. shutter 35 mm thick solid core

malemine faced three layered pre

laminated flat pressed wood based

exterior grade bonded BWP/BWR

synthetic resin having stamped IS

grade I type II including three coats of

lacquer polishing to exposed wooden

surfaces and Stainless steel decorative

type designs fixtures / fastening

etc.including I.T.W. triangular batten

patti of size 30m.m.x30m.m.etc. as per

architectural detailed drawing and as

directed by engineer in charge.

Providing and fixing FRP frame size

125x65mm and 35 mm thick FRP shutter

with wood grain raised panneledde sign

finish shutter having extra reinforcement

on sides & edges in Gel coat finish. The

core of the shutter & frame is to be filed

up with injected polyurethene foam done

41 in situa long with embedded wooden Smt 4.00

pieces for stiffening & also taking hinges

&fintures. The whole FRP frame &shutter

is to be water proof weatherproof

,termite proof & resistance to mild

acid/alkali. Rate sare to be inclusive of

S.Shinges with fastener sleeve

&alluminium fixtures & fastenings.

Providing & applying CHEMICAL WATER

PROOFING treatment to the terrace

including Surface cleaning: All surface

shall be thoroughly cleaned with

mechanical means or wire brush to

remove dust dirt & all loose portion from

the surface of terrace & parapet wall.&

wash with water. Surface preparing: All

cracks will be opened in V-shape &

sealed wirh Dr Fixit Crack X Paste & any

patch work will be repaired with

polymer modified mortar, providing and

applying two coat of Dr.Fixitpidifine 2K

on entire inside area of sunk. Two coat of

Dr.fixitpidifine 2K(10 kg Powder + 5 lit

Liquid) shall be applied on ready surface

in vertically & horizontally direction

which is brsh applied waterproofing

coating & provides excellent

impermeable coating & flexible enough

to take care of minor cracks in concrete &

plaster & good adhesion with

cementitious surfaces etc. completed by

Providing and laying broken chine

mosaic flooring for terrace using 12 mm

to 20 mm broken pieces of glazed tiles to

be laid over cement mortar 1:3 to plain

or slope and to be tempered to bring

mortar creme out upto surface using

white cement including rounding off

junctions and extending them upto 15 cm

along the wall,clearing with water and

oxalic acid etc. as directed.

Structural steel work ( Confirming to IS

4923-1997) riveted, bolted or welded in

builtup for all type sections, in framed

work, including cutting, hoisting, fixing in

position and applying a priming coat of

approved steel primer all complete as

per the structural designs and directions

of Engineer in charge.

Painting one coats (excluding priming

coat) on previously printed steel and

other metal surface with synthetic

enamel paint, brushing to give an even

shade including cleaning the surface of

all dirt, dust and other foreign matter.

Paver Block Providing and laying shot

blasted Non - interlocking, Paver blocks

of specified thickness, size, grade of

concrete and colour machine made and

blasting by automatic shot blasting

machine and high density of as per

approved sample of approved make for

footpath, parking areas, service

lanes,cross over and other areas as

mentioned in the drawing. Including

providing and laying 50 mm thick

averave bedding layer of coarse sand

below paver block as per required

grading and specification. Laid paver

block shall be mechanically compacted.

46 The work of the paving blocks shall be Smt 385.00

executed in line and level by skilled

mason of flooring work only. Small size

of paver block with same specification

shall be used at residue or at end. It

should be laid in such a way that the no

cutting of the paver block to be

necessary. If cutting of paver block shall

be required , than cut by machine only

and laying to be done by skilled flooring

mason. The finished surface of the paver

block shall have coarse sand Texture

Finish. Pave blocks shall be compacted

and shall be re-laid if necessary. Actual

laid area shall be measured and paid

without any wastage.

Pre cast concrete kerb Providing and

fixing M25 Grade of concrete precast

exposed / Fair finish / texture finish kerb

stones of approved make as per

approved sample of any size and any

type. Kerbs shall be fixed on the

foundation prepared as per approved

design. The rate shall also include for

erecting and fixing the pieces in position

for complete kerb system with

chamfered type of kerbs including

47 necessary accessories of kerb like radius Rmt 550.00

kerbs, angles and quadrant kerbs,

droplet kerbs etc. complete as per

drawing. Kerb shall be fixed as paper

joint without any jointing material.

However cement mortar shall be

provided at the backside of kerb stone

joint. (Sample must be approved) Cost of

excavation, cutting , base , side filling

shall includes as directed engineer -

incharge in above item description as per

BOQ (b) 380 x 600 x 150 mm high

Footpath kerb. As per approved rate

Providing & Laying P21(water reducing

concrete admixture at 100 ml per bag of

cement & recon 3 s fiber at 125 gm per

bag of cement including making C

channel 75 x 75 mm required to maintain

level,slope and thickness of the concrete

road leveling of placed concrete with

surface vibrator and finishing with

power floater & trowel light brooming

the surface & Groove cutting & filling of

expansion joint as directed by Engineer

Providing, laying, spreading and

compacting Wet Mix Macadam (as per

table 400 - 10 and 400 - 11) of well

graded stone aggregate to specification

including premixing the Material with

water at OMC in mechanical mix plant as

per approved design mix, carriage of

mixed material by Tipper to site, laying

49 in uniform layers with motor Cum 790.00 1710.00

grade/Front end Loader/paver finisher,

in sub base/base course on a well

prepared under base and compacting

with vibratory roller to achieve the

desired density including lighting,

guarding, barricating and maintenance of

diversion etc. (MoRTH specification :

Clause 406) by mechanical means

Providing and laying rubble soling, 23 cm

thick, in a compact manner, foudation,

road, footpath etc. using 200 to 230 mm.

cut size stones, covering and levelling the

50 surface with a layer of murrum after Cum 1700.00 1039.37

filling the voids with smaller sized stones

or stone chips, including watering,

ramming well and consolidating each

layer, as directed.

Providing and laying of Hot applied

thermoplastic compound 2.5 mm thick

including reflectorizing glass beads and

250 gms per Sq.m. area thickness of

mm is exclusive of surface applied glass

beads as per IRC-35 2015. The finished

surface to be level/uniform and free from

streaks and holes or chipping of

Thermoplastic if any and including

primer coat for C.C. surface and A.C.C.

surface, in white and/or yellow colour.

51 Rate includes brushing, blooming and Smt 18.00

cleaning and application of paint. Zebra

patta/Bump patta/Lane line/Center

line/Cut patta, Directional Arrow,

Lettering MoRT&H Clauses 803 &Volume

II Part III and IRC 35-2015.Rate shall

include brushing, brooming, painting and

repainting of worn out paint after a

period of 2.5 years.

Note:-As per drawings and design

supplied by architect and instruction

given by authority and E.I.C.

Providing & Fixing the Chikenmesh -

guage(Crimp Jali) of approved size

applying between the RCC and masonry

junction in proper line, level and plumb

with all material, labour, tools, tackles

and equipment. Including providing and

fixing the jali with nails, etc complete as

directed by the site-incharge.

Providing and fixing 1.20 Metre high

fencing with 2.0 Metre long M.S. Angle

posts 40mm x 40 mm x6 mm and oil

painting 3 coats fixed at 2.5 Mt,C/c. with

five Horizontan lines and two diagonals

53 of galvanised steel barbed wire RMT 258.00

weighting 9.38 Kg. per 100 Metre,

strained and fixed to posts with

G.I,staples including fixing the postsin

ground with 0.5 M x 0.5.M x 0.5 M. block

in C.C1:5:10 etc complete.

A polyethylene lawn is a surface made of

synthetic fibers manufactured from

polyethylene (PE) plastic, designed to

look and feel like natural grass. It is a

54 type of artificial turf commonly used in SMT 660.00

residential and commercial landscaping,

sports fields, and recreational areas due

to its durability and low maintenance

Point wiring for Light / Bell with 2-1.5

sq.mm &earthwire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS

PVC insulated multistrand copper wires,

in following type of pipe to be erected

concealed in/ on surface on wall/ceiling

complete with 6A Modular type switch /

bell push & accessories and earth

continuity of following type, erected on

PVC / Metallic box, single mounting base

frame covered with textured/metallic

front plate modules erected on / in wall

/ ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose /

H.D.Connector as directed. (f) with

medium class Rigid PVC pipe and

accessories erected concealed in

wall/ceiling complete

(a) with medium class Rigid PVC pipe

56 and accessories erected flushed on Pt 3 467.25

wall/ceiling complete CAT-III

Point wiring for Modular secondary light

point with 2-1.5 sq.mm & earth wire of

1.5 sq.mm (green) both are of ISI marked

1.1 KV grade FRLS PVC insulated multi

strand copper wires, in below type of

pipe to be erected complete with earth

continuity and necessary connection

with primary light with accessories

erected on Metal / PVC / wooden box

covered with 3 mm thick

PC(Polycarbonate) / Acrylic sheet for

open / concealed wiring. with necessary

Lamp holder / ceiling rose /

H.D.Connector as directed. (f) with

medium class Rigid PVC pipe and

accessories erected concealed in

wall/ceiling complete - Note:- Maximum

up to 6 mtrs length, excess will be

considered as Mains for Secondary

(a) with medium class Rigid PVC pipe

58 and accessories erected flushed on Pt 3 137.55

wall/ceiling complete

Point wiring for FAN with 2-1.5 sq.mm

&earthwire of 1.5 sq.mm (Green) both

are of .ISI marked 1.1 KV Grade ZHFR

PVC insulated multistrand copper wires,

in following type of pipe to be erected

concealed in / flushed on wall/ceiling

complete with 6A Modular type switch

and hum free EME four or more step type

electronic fan regulator with separately

mounted and accessories with earth

continuity of following type erected on

PVC / Metallic box, single mounting base

frame covered with textured/metallic

front plate modules erected on / in wall /

ceiling as per pipe erected. with

necessary ceiling rose / H.D.Connector as

directed. (f) with medium class Rigid PVC

pipe and accessories erected concealed

in wall/ceiling complete

Providing following type of Modular

Type Accessories mounted with PVC /

metallic/Wooden box, single mounting

base frame covered with textured /

60 metallic/white front plate , modules Ea 50 179

erected with necessary connections as

per site situation directed by Engineer In

charge. (9) 16 Amp. SP one way switch

61 (2) One No 6 pin plug Cat.III Ea 5 150

62 (10) 6/16Amp. Universal socket Cat.III Ea 20 198

Providing & erecting Switch board for

Computer or electric apparatus

consisting of following items in single

board erected on PVC / Metal board

with 3 mm thick PC (Polycarbonate) /

63 Acrylic sheet erected as directed for Ea 2 1122

[B] modular type accessories

1 no. 6A/16A universal plug-switch

combined. CATIII

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

MAINS WIRING AND CONDUIT

Providing and erecting ISI mark Medium

class RIGID PVC PIPES of following size

complete to be erected on/in wall or

ceiling erected with necessary PVC

fittings & Junction boxes fixed with

adhesive solution & Clamps with

following dia of pipes, in approved

manner as directed

Providing and erecting Mains with 1.1 KV

grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in

following type of pipe to be erected

66 concealed in /flushed on wall/ceiling,

with 1.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green

colour for earth continuity of following

(A) With medium class Rigid PVC pipe

and accessories

68 (a) 2 wire 1.5 sq. mm Mtr. 200 62.00

69 (b) 2 wire 2.5 sq. mm Mtr. 200 82.00

FANS & EXHAUST FAN ACCESSORIES

Providing & erecting Approved make

Power Saving 50 Watt Ceiling Fan with

double ball bearing ISI mark with

Condenser 230 volt A.C. 50 Hz 1200 mm

70 sweep complete having 3blades with Ea. 1 1,929.00

aluminium blades with , canopy & 30 cm.

down rod erected with earthing.(Make

shall be approved by Engineer in

Supplying and erecting 19 / 20 mm.

nominal bore Medium Class M.S. Pipe

71 down rod erected duly painted for fan Mtr 1 107.00

complete with necessary 24/ O.20, 3 core

flexible wire with earthing.

Supplying & erecting fan hook box of

mm M.S. round bar bounded to the RCC

bars up to 50mm length each side and

72 pierced through a 16 Gauge M.S. box / Nos 1 107.00

Heavy Duty PVC box complete erected

concealed in Ceiling with necessary

Supplying & erecting approved make low

noise decorative Exhaust fan having size

73 200mm with 1350 RPM with square Nos 2 1,687.00

frame ABS body with inbuilt lowers &

LIGHTING FIXTURES :

Supplying and erecting led lamps with

following wattage capacity of 220 to

voltage, minimum 15000 burning hours

life, 500 V in built-surge

74 protection,Polycarbonate diffuser, EA 5 187.00

mounting suitable for E14 / E27 / B22

lamp holders, pf >= 0.5. (A) LED Lamps

integral type, with PC diffuser suitable

LAMP holder. (iii) 10 to 15 watts. Cat-III

Supplying and erecting LED indoor

fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be

made of thick sheet Steel conforming to

IS: 513/CRCA/aluminium pressure die

cast powder coated and high U.V. &

corrosion resistance with diffuser

housed in aluminium casted body with

company mark/name

160V to 270V,Power Factor more than

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description

have shown ranges of Wattage capacity

of LED fittings.The Engineer incharge

may select any wattage capacity between

the ranges shown.). (A) Square/ Circular

shaped Surface/Recessed Mount

Downlight with provision for spring

loaded mounting clips complete.IP20.

(iii) 16-20 watts, Surge-2 KV. Cat-lll

DISTRIBUTION BOXES

Providing and erecting Sheet Steel

powder coated MCB distribution board -

flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC

61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs

should be used of same company of MCB

to be used) suitable for. (A) single phase

incoming and horizontal single phase

outgoing. (iii)Single phase 8 way SS

Providing and erecting Sheet Steel

powder coated MCB distribution board -

flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN

rail, confirming to IS 13032 and BS 5486- Ea. 1 2,316.00

1986 without MCB to house appropriate

nos. of MCBs i) Three phase 4 way SS

Double door for horizontal single phase

Providing and erecting Sheet Steel

powder coated MCB distribution board -

flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN

rail, confirming to IS 13032 and BS 5486- Ea 1 3,836.00

1986 without MCB to house appropriate

nos. of MCBs iv) Three phase 12 way SS

Double door for horizontal single phase

MINIATURE CIRCUIT BREAKER

providing and erecting Miniature circuit

breaker single pole 6A to 25A suitable to

operate on 240 V A.C. system and having

breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996

25 Cat.III Ea. 34 111.00

Providing & erecting 240 V MCB double

pole switch for lighting Load (B Curve)

26 having 10 KA breaking capacity &

confirms to IS : 8828 in existing box

having following capacity

27 (A) 6 to 32 Amp.

28 Cat.III Ea. 1 276.00

Providing & erecting 415V MCB Four

Pole Switch for Lighting Load (B curve)

29 having 10KA breaking capacity &

confirms to IS :8828 in existing box

having following capacity

31 Cat.III Ea. 1 730.00

Approved make ELCBs / RCCBs

conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit

withstand capacity of 6 KA and suitable

for operation on single phase 240 V.

33 having characteristic of quick action & Ea 1 1,950.00

tripping with all advance feature & do

not incorporate any electronic

component. for following Max. rating

erected as directed (i) 25 Amps.DP Cat.

Approved make ELCBs / RCCBs

conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit

withstand capacity of 6 KA and suitable

for operation on single phase 240 V.

34 having characteristic of quick action & Ea 3 2,213.00

tripping with all advance feature & do

not incorporate any electronic

component. for following Max. rating

erected as directed (ii) 40 Amps.DP Cat.

Providing and erecting XLPE(IS:7098)(I)-

88 ISI armoured cable multistrand

Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in

existing trench / pipe of following size of

(B) 3 1/2 core 35 Sq. mm ( 16 Sq. mm

Providing and erecting XLPE

(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for

1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe of

following size of cables

(A) 4 core 16 Sq. mm Mtr. 50 152.00

(B) 4 core 25 Sq. mm Mtr. 50 189.00

Providing and erecting XLPE

(IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Aluminium conductor

for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench /

pipe of following size of cables

(C) 4 core 10 Sq. mm Mtr. 600 139.00

Providing and erecting XLPE(IS:7098)(I)-

88 ISI armoured cable multistrand /

Solid Copper conductor for 1.1 KV. to be

laid on wall with necessary clamps or in

existing trench / pipe at road crossing

or floor of following size of cables.

(B) 4 core 4 Sq. mm Mtr. 50 361.00

(C) 4 core 6 Sq. mm Mtr. 50 505.00

Making trench in soft soil of suitable

width of 90 cm deep for laying cable or

39 locating the fault all over the run and Mtr. 400 55.00

back filling the same and making the

surface as normal ground.

Providing & laying approved make

Double walled corrugated pipes (DWC)

of polyethylene(conforming to IS

II )with necessary connecting

accessories of same material at required

depth in existing trench for laying of

cable. below ground / road surface for

enclosing cable

41 (A)50 mm outer dia Mtr. 200 62.00

42 (B)63mm outer dia Mtr. 300 73.00

Providing and, fixing heavy duty flange

type brass cable gland with rubber ring

43 for PVC insulated armoured cable

complete with out going tails, insulating

tape etc for following size of cables.

45 (C) 2 to 4 core 10 Sq. mm Ea. 60 38.00

Providing and, fixing heavy duty flange

type brass double compression type

cable gland with rubber ring for PVC

insulated armoured cable complete with

out going tails, insulating tape etc for

following size of cables.

Solder less crimping type Aluminium lugs

49 conforming to IS suitable for cable of

following size evenly crimped with high

pressure tool & connected to switchgear

terminals with brass/cadmium plated

nut bolts in an approved manner.

EXTERNAL STREET LIGHT

Street Light Pole

Supply of approved make GRP / FRP Pole

having following specifications: GRP

Light Pole made by CNC filament winding

machine using thermoset resin

polyester/epoxy resin system) having

minimum 62% glass content. The pole

should be in one piece and tapered round

in shape, having smooth finish and

should be totally free from corrosion as

well as non conductive& shock proof Pole

should be provided with FRP Anchor

Base and it should be heavy duty, or MS

Material duly painted with Epoxy paint.

Pole should be flame retardant as per IS

6746. Resin used shall be UV resistance

and pigmented. A highly weather

resistant polyurethane coating shall be

applied to the pole after applying

suitable primer system that ensures

proper adhesion of the paint. Minimum

coating thickness shall be 80 to

micron. Deflection of the pole shall not

exceed more than 10% of the length of

pole for the given load“? Pole should be

generally made as per the dimensional

data, performance criteria and some

interchangeability features of poles as

standard ANSI C 136.20 latest version or

ASTM D 4923/01 . The size of pole and

type of installation are as below

Supply of approved make FRP Pole

having following specifications: FRP

Light Pole made by CNC filament winding

machine using thermoset resin

polyester/epoxy resin system) having

minimum 62% glass content. The pole

55 should be in one piece and tapered round

in shape, having smooth finish and

should be totally free from corrosion as

well as non conductive& shock proof

Pole should be provided with FRP

Anchor Base and it should be heavy duty,

or MS Material duly painted with Epoxy

Pole should be flame retardant as per IS

6746. Resin used shall be UV resistance

and pigmented. A highly weather

resistant polyurethane coating shall be

applied to the pole after applying

suitable primer system that ensures

proper adhesion of the paint. Minimum

coating thickness shall be 80 to

micron. Deflection of the pole shall not

exceed more than 10% of the length of

56 pole for the given load“ Pole should be

generally made as per the dimensional

data, performance criteria and some

interchangeability features of poles as

per standard ANSI C 136.20 latest

version or ASTM D 4923/01 including

cable termination box with necessary

accessories . The size of pole and type of

installation with foundation as per

manufacturer details and site

requirement are as below .

(1) Suitable for base plate mounting

single arm Bracket.

[H] Overall length of 6 Mtr. Average

Thickness: 7.5mm

Top/ Bottom OD Dia A/F 89mm ± 2mm

approx. approx. Weight of Pole 32 kg

approx. (Without Base) Anchor Base

(Size 300X300 & 18mm Th.)

(2) Suitable for base plate mounting

Double arm Bracket.

[C] Overall length of 6 Mtr. Average

Thickness: 8mm.

Top/ Bottom OD Dia A/F 114/174 mm ±

2mm approx. approx. Weight of Pole

kg approx. (Without Base) Anchor Base

(Size 300X300 & 18mm th.)

Providing 1:2:4 cement concrete

foundation & 70 % PCC from bottom

including excavation for the pole of size

45 x 45 x 100 cm. Deep in below ground

59 level with plinth of 45 cm x 45 cm (or 45 Ea. 30 801.00

cm dia x 45 cm) high upper ground level

with necessary curing and finishing in

approved manner.

( for 4 & 6 mtr pole)

Providing cement concrete.for

foundation or for concrete filling in 1:2:4

60 ratio with 20 to 25 mm stone metal duly Cu.Mtr 10 5,077.00

plastered with necessary curing for pole

muffing or any other purpose.

Providing FRP arm bracket of having

sets of suitable SS304 hardware for fixing

the brackets & spread of 1.2 Mtr(Suitable

for 89 to 114 mm pole top dia)

(A) Single arm bracket Ea 20 2,526.00

(B) Double arm bracket Ea 10 3,895.00

(C) Triple arm bracket Ea 10 5,259.00

Supplying and erecting LED street light /

Flood light fittings with High power

White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency

more than 130 lm/w and corrosion free

High pressure die cast aluminum housing

with smooth finish powder coated and

heat sink extruded aluminium with

diffuser and Polycarbonate optics/

lenses, with toughened glass with

company mark/name engraved or

embossed 160 to 270 V,Power Factor

more than 0.95, THD < 10 %, CCT 3000 K

to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt .

LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80

certificates)(NOTE: Below description

have shown ranges of Wattage capacity

of LED fittings.The Engineer incharge

may select any wattage capacity between

the ranges shown.). (A) Street Light (IP-

65), Surge protection -4KV integral and

,Light must have 440VAC line supply

with over-voltage protection. (iii) Above

60 to 90 watts cat-III

(B) Flood Light (IP-65), Surge protection

-4KV integral and Light must have

63 440VAC line supply with over voltage Each 21 7,195.00

protection. (iv) above 90 to 120 watts

Supplying and erecting Flexible PVC

insulated multi strand multi core 1.1 kv

grade ISI marked copper wires of

following size to be erected as directed.

(h) 2.50 Sq.mm 3 core round PVC

Supplying & erecting approved make IP

55 grade Company fabricated Timer

Panel of following capacity for switch

On-Off street lights on time scheduling

basis made from 16G CRCA sheet duly

epoxy power painted inside and outside

with hinged doors and locking

arrangement consisting of suitable size of

4 Pole MCB and 4 pole contactor (cat-

III)with analog time switch, auto manual

switch of same make and suitable input

and output Bakelite terminals and with

door earthing approved by Engineer in

Providing and erecting Annealed bare

Copper wire 8 to 16 SWG.

Supplying & erecting in earthpit of

minimum bore dia. 225mm size

approved make Safe Earthing Electrode

consisting Pipe-in-Pipe Technology as

per IS 3043-1987 made of corrosion free

hot dipped G.I.Pipes having Outer pipe

dia of 80 mm having 80-200 Micron

galvanising, Inner pipe dia of 40 mm

68 having 200-250 Micron galvanising,

connection terminal dia of 14 mm with

constant ohmic value surrounded by

highly conductive compound with high

charge dissipation suitable for following

type of applications with chamber and

heavy duty cover.(approved make OEM

has to submit test certificate including

value of earth resistane of installation.

[A] For electrical installation up to 440 V

Length of Pipe - 1 Mtr

Back filling compound - 1 Nos. of Bag of

[B] For Electrical installation up to 11 KV

located in other than normal soil i.e.

Soft Rock, Marshy Soil etc.

-Length of Pipe : 2 mtr

-Back filling Compound :1 no. Bag of

[C] For Electrical Installation covering

Transformer Neutrals, Lightning

arrester Earthing, A.C.Plant& Sensitive

Computer System(like Automation,

SCADA)i.e. independent Earthing Ea. 2 10,489.00

located in other than normal soil i.e.

Soft Rock, Marshy Soil etc..

-Length of Pipe : 3 Mtrs.

-Back filling Compound :2 nos Bags of

WATER COOLER AND PURIFIER

Providing & erecting water cooler having

storage capacity 150 Ltr. & cooling

capacity 150 Ltr.per hour @ an ambient

temp of 45˚ C. The outlet temp. of the

water should drop by 15˚C within a hour,

The water cooler should be comprising of

70 hermetically sealed compressor, fan Ea. 1 55,340.00

motor, condensing unit, water tank

surrounded by evaporating, coil,

thermostats, relay etc.complete with

necessary inlet & outlet connection. The

body of water cooler will be made from

Stainless Steel.

Supplying and erecting water filter cum

purifier with ultra violate technology.

71 (Aquaguard / waterdoc model or Ea. 1 5,371.00

equivalent symphony/ crystal/videocon

TOTAL FOR ELECTRICAL WORKS :

WATER SUPPLY PLUMBING & SANITARY

Providing erecting and fixing double

coated Syntex PVC. (ISI) water tank of

72 required capacity each with all necessary litre 1000.00 3.91

fittings and connection etc. complete on

Providing and fixing wsh down water

closet (European type, W.C. Pan) with

integral P or S trap including jointing the

trap with soil pipe in Cement Mortar 1:1

(1-Cement : 1-fine sand) (Seal and cover

to be measured and paid for

separately)(A) vitreous China Pattern :(i)

in white colour

Providing and fixing 12.5 Litres low level

flushing cistern with a pair, of C.I. or Mild

brackets, complete with fittings such as

lead valve less syphon, 15mm nom.nal

size brass ball valve with polythene float,

C.P brass handle unions and couplings

for connections, with inlet, outlet and

overflow pipes, 40mm dia. porcelain

enamelled flush bend including cutting

holes in walls and making good the same

connecting the flush bend with cistern

and closet (overflow pipe to be measured

and paid for separately)(A) Vitreous

China (I) In white colour

Providing and fixing plastic seat and

cover for wash down water closer with

C.P. brass hinges and rubber buffers. (B)

Black plastic seal and cover.

Providing and fixing washbasin with

single hole for pillar tap with C.I. or M.S.

brackets painted white including sutting

76 holes and making good the same but Each 2.00 1441.64

excluding fittings.(A) Vitreous China:(ii)

Flat Back washbasin 550 mm x v 400mm

size. (i) In white colour.

Providing and fixing C.P. brass waste for

washbasin or sink. (B) 40mm dia.

Providing and fixing M.I. fisher union

for washbasin or sink. (B) 40mm dia.

Providing and fixing 100mm sand cast

79 iron grating for gully, floor or Nahni Each 2.00 36.61

Providing and fixing 600mm x 450mm

bevelled edge mirrror of superior glass

mounted on 6mm thick A.C. sheet or

plywood sheet and fixing to wooden

pluge with C.P. brass screws and

Providing and fixing 600mm x 120mm

glass shelf with C.P. brass bracket and

guard rail complete mixed to wooden

plug with C.P. brass screws.

Providing and fixing toilet paper

holder.(A) C.P. Brass

Providing and fixing screw down bib taps

of following size.(B) Brass chromium

plated screws down Bib Tap. (ii) 20mm

Providing and fixing pillar tap, capstan

head, screw down high pressure with

screws, shanks and back nuts.(ii) 20mm

Providing and fixing chromium plated

brass half trunflush cock of approved

quality including fixing in pipe line etc.

complete.(i) 20mm dia.

Providing and fixing Urinal or approved

quality including conecting the Urinal

86 with waste pipe , tap etc. complete.(A) Each 3.00 1051.66

White earthenware flat back or corner

type size 430mm x 260mm x 350mm.

Providing and fixing Rubber plug for

sink or wash basin.

Providing and fixing chromium plated,

88 bottle trap with necessary couplings of Each 2.00 292.87

approved quality for wash basin.

Providing and fixing ball cock of

89 approved. quality as directed.(A) Copper Each 5.00 187.96

Metal (ii) 50mm dia.

Providing and fixing Angle Cock with

screw, back nuts all necessary fittings etc.

90 Completed Each 3.00 496.00

(Cera-CM108/ Parryware-T9939A1 /

Hindware-F100043)

Providing and fixing 12mm dia. Health

faucet with 8 mm dia of JAQUAR /

HINDWARE/ CERA or approved make

91 selected by Architect with flexible pipe Each 5.00 1256.00

of 1mt. length and holding stands

complete. Model Equivalant to Jaquar-

Providing and fixing concealed center

point to wall ceiling & floor CPVC (SDR

13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water

of following dia. nominal bore tube

fittings and clamps including making

good the wall, ceiling and floor etc.

complete. [B] 20 mm.

Providing and fixing concealed center

point to wall ceiling & floor CPVC (SDR

13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water

of following dia. nominal bore tube

fittings and clamps including making

good the wall, ceiling and floor etc.

complete. [D] 32mm.

Providing and fixing concealed center

point to wall ceiling & floor CPVC (SDR

13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water

of following dia. nominal bore tube

fittings and clamps including making

good the wall, ceiling and floor etc.

complete. [E] 40mm.

Providing and fixing Gun metal check or

95 non-return fullway wheel valve.(C) Each 1.00 346.00

Providing and fixing to wall ceiling and

floor 10.0 Kg. F/Cm2 working pressure

polythene pipes of the following outside

96 Dia. Low densidy, complete with special Rmt 24.00 277.46

falnge compression type fittings, wall

clipsetc. including making good the wall

ceiling and floor.(F) 75mm

Providing and fixing to wall ceiling and

floor 10.0 Kg. F/Cm2 working pressure

poluthene pipes of the following outside

97 Dia. Low densidy, complete with special Rmt 30.00 335.69

falnge compression type fittings, wall

clipsetc. including making good the wall

ceiling and floor.(G)110 mm

DRAINAGE & SEWERAGE ITEM

Constructing Manhole with R.C.C. top

slab in 1:2:4 mix (1-cement :2-coarse

sand : 4-graded stone aggregate 20mm

nominal size) foundation concrete 1:3:6

(1-cement : 3- coarse sand :6-Brick bats

40 + 50mm size) inside plastering 15mm

thick with Cement Mortar 1:3 (1-Cement

: 3-coarse sand) finished with a floating

coat of neat cement and making channels

in cement concrete 1:2:4 mix (1-Cement

:2-Coarse sand :4-stone aggregate 20mm

98 nominal size) finished smooth complete Each 1.00 10933.41

including curing and festing (i) Inside

size 900mm x 1200mm and 1.5M. deep

including C.I. cover with frame size

560mm diameter total weight of cover

and frame to be not less than 128 kgs.

(Wt. of cover 64 Kg. and Wt. of frame

Kg.)(A) With 230mm thick walls of brick

msonry using brick having crushing

strength not less than 35Kg. /Sq.cm. in

Cement Mortar 1:5 (1- Cement: 5-Coarse

sand)(1) A type depth 0.90 Metre for

150mm diameter sewer.

FINAL TOTAL OF THIS

Signature of contractor Additional City Engineer (NORTH ZONE)

Seal Ahmedabad Municipal Corporation

AHMEDABAD MUNICIPAL CORPORATION

MAHANAGAR SEVA SADAN - NORTH ZONE

Name of Work: CONSTRUCTION Of SKATING RINK & BOX -CRICKET AT NARODA-2 T.P.S NO-40,F.P NO-35

FINANCIAL BID ( To Be Submitted Online Only )

Sr. No. Description Amount

1 Amount For Civil+Plumbing+ElectriC Rs.2,12,19,760/90

Total Rs.2,12,19,760/90

I/We am/are willing to carry out work at ______ % above / below (should be written in figures and words)

the estimated cost mentioned above.

Estimated cost put to tender : RS. Estimated cost put to tender : RS.

Add_____% above : Rs ___________ Deduct_____% below : Rs __________

In words : Rupees _______________________ In words : Rupees_____________________

Signature of contractor Additional City Engineer (NORTH ZONE )

Seal Ahmedabad Municipal Corporation