Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹1.4 CrAdmitted-Fee/PreQual/Technical/Finance SALEMA DHALAI TRIPURA 799278 | DHALAI | TRIPURA | 799278 | -3.30% | ₹1.4 Cr | L1 | Admitted-Fee/PreQual/Technical/Finance |
Tender Value
₹1.4 Cr
EMD Value
₹2.8 L
Closing Date
8 Sept 2026, 3:00 pmClosed
Executive Engineer,PWD(R and B),Kamalpur Division
O/o. EE, PWD(R and B), Kamalpur Division
Development of road, 1) K-A road at Salema Bazar to K-M-A Road (Length 1.42 Km), 2) K-M-A Road to Maddhya Kachucherra (Length 2.561 Km) under Salema Sub-Division, PWD(RandB), during the year 2026-27
2026_CEPWD_76497_1
22/DNIT/SE-V/AMB/2026-27
Open Tender
Civil Works - Roads
Percentage
Salema
Please refer Tender documents.
5 documents required · 5 mandatory
₹4,000
₹2.8 L
Yes
14 Sept 2026
31 Aug 2026
8 Sept 2026
31 Aug 2026
8 Sept 2026
1 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation for Structures
A. Without dewatering
Earthwork in excavation for structures as per drawing and MoRD technical specifications Clause 305.1 including setting out, construction of shoring & bracing, removal of stumps & other deleterious material and disposal upto a lead of 50 m, dressing of sides & bottom and backfilling in trenches with excavated suitable material.
I. Ordinary Soil
i) Upto 3 mtr. depth | 0.6 | Cum | 458.2 | ₹274.46 |
| 2 | Filling in foundation trenches as per drawing & MoRD technical specification Clause 305.3.9, 1200.
I. Sand Filling | 1 | Cum | 1,277.58 | ₹1,276.3 |
| 3 | Providing concrete for plain concrete (using jhama brick aggregate) in open foundations complete including formwork as per drawings & MoRD technical specifications Clauses 802, 803, 900,1202 and1203. (including centering, shuttering, staging etc.but excluding reinforcement)
I. P.C.C grade M 10 (using jhama brick aggregate)
i) Nominal Mix 1:3:6 (Hand Mixing) | - | Cum | 9,551.88 | - |
| 4 | Brick masonry work in cement mortar in foundation completed excluding pointing & plastering as per drawing & MoRD technical specifications Clauses 600, 1202 &1203.
II. Brick masonry in 1:5 cement mortar | 0.2 | Cum | 9,988.6 | ₹1,987.73 |
| 5 | Plastering with cement mortar (1:4) 12 mm thick on brickwork/ C.C. work including a finishing coat of neat cement punning with 2.75 kg of cement per sqm in substructure as per MoRD technical specification Clauses
613.4 & 1204. | 0.8 | Sqm | 238.52 | ₹190.82 |
| 6 | Maintenance of Earthen shoulder (Stripping of excess soil) Stripping excess soil from the shoulder surface to achieve the approved level and compacting with plate compactor at OMC as per drawing and MoRD technical specification Clause 1903. | 1 | Sqm | 19.1 | ₹19.08 |
| 7 | Granular Sub-base with Well Graded Material (Table 400.1)
(A) By Mix in Place Method
Construction of granular sub-base by providing well graded material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per MoRD Technical Specification Clause 401.
(i) For Grading I Material | - | Cum | 6,703.59 | - |
| 8 | WBM Grading 3
Providing, laying, spreading and compacting jhama brick aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing rolling with three wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading- 3 as per MoRD Technical Specification Clause 405.
A. By Manual Means | 0.2 | Cum | 7,845.04 | ₹1,569.01 |
| 9 | Prime Coat.
Low porosity.
Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.00kg/sqm using mechanical means as per MoRD Technical Specification Clause 502 | - | Sqm | 73.79 | - |
| 10 | Tack coat using hot straight run bitumen of grade VG-30 on bituminous surface Providing and applying tack coat using hot straight run bitumen of grade VG-30, including heating the bitumen, spraying the bitumen, cleaning and preparing the existing road surface as per specifications: On bituminous surface @ 0.50 Kg/ Sqm. bituminous surface | 0.2 | Sqm | 41.32 | ₹8.26 |
stage.html
html • 0.02 MB
finance_77872.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.36 MB
BOQ_77872.xls
BOQ • 0.36 MB
tenderdocument.pdf
Tender Documents • 2.18 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .