Jal Jeevan Mission (JJM)-JICA Assisted KWSP to Cherthala Taluk-Improving water supply in Thycattussery Panchayath by replacing pumpset-Pipeline Work

Amount

Supply and Erection of New pumpsets for zone-2B including dismantling existing pumpsets

OD47438/2023-2024:Supply of Horizontal split casing type Centrifugal pump having 220M3/hr Discharge against a total head of 30M with rated speed of 1450 RPM and shall have preferable head range of 20 to 40M, the pump shall be horizontal axially split casing single stage double suction with horizontal shaft and detachable stuffing box, bronze impeller shall be axially split volute enclosed double suction, high tensile steel shaft shall be of ample size to operate under load with minimum deflection, minimum pump delivery size shall be 125mm. Supply of 4-pole 3-phase Horizontal TEFC Squirrel Cage Induction Motor of 30kW capacity as prime mover for the pump. All inclusive of cost of Pump and Motor. The work is for replacing the existing KBL make SCT-125/29 series pump, Marathon make 15kW motor. Hence the recommended pump is KBL make SCT-125/38 series or equivalent type.

OD47479/2023-2024:Supplying R&D Multiples/equivalent make 200mm PN-16 Double Flanged Butterfly Valve with Manual Gear Box as per IS 13095 - short body type of Ductile Iron IS 1865 Gr. 500/7 Body and Disc and Stainless Steel AISI 431 grade Shaft.

OD47480/2023-2024:Supplying R&D Multiples/eq make 200mm PN-16 Wafer type Dual Plate Check Valve Ductile Iron Body, Stainless Steel Plate, EPDM Seat, Suitable for mounting between ASA 150 Flanges.

OD113229/2023-2024:Supply of DI Double Flanged Non raising type Gate Valve Conforming to IS 14846 - 2000, Gate Valve with Hand Wheel PN 16, Size 250mm.

OD113230/2023-2024:Supply of R&D Multiples/equivalent make DI Air Release Valve with Flanges, Conforming to IS 14845 - 2000, Double Chamber Type of PN-16, Size 80mm.

OD115391/2023-2024:Supply of DI Double Flanged Non raising type Gate Valve Conforming to IS 14846 - 2000, Gate Valve with Hand Wheel PN 16, Size 80mm.

OD47483/2023-2024:Fabricating and fixing Blind Flange of 200 mm ID using 25 mm thick MS plate including cost and conveyance charges of MS plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under coat of primer etc. complete.

OD138055/2023-2024:Fabricating and fixing MS Blind Flange 250 mm ID using 25 mm thick MS plate including cost and conveyance charges of MS plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under coat of primer etc. complete.

OD138054/2023-2024:Fabricating and fixing MS Blind Flange of 400 mm ID using 32 mm thick MS plate including cost and conveyance charges of MS plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under coat of primer etc. complete:

OD47484/2023-2024:Dismantling carefully without damage 150mm Stainless Steel Diaphragm Sealed Bourdon tube Analog Pressure Gauge and its pipe assembly from header and suction pipes, supply of vertical connection and air release accessories of Pressure Gauge such as 20NB MS Hex Nipple-1No, 20mm CS Sch80 pipe-0.30M, 20NB D/F CS Ball Valve-1No, 20NB CS/SS Flanges-2Nos, 20x10mm SS Reducer -1No, 10mm SS Tube-0.30M, 10mm SS Hex Nipple-2Nos, other accessories if any required for connecting Pressure gauge with Header/Suction pipes, The following items from dismantled assembly shall be reused such as 150mm Pressure Gauge, 10mm SS pipe and its assembly such as 10mm SS Socketed Tee, 15mm SS Socketed Adapter/Union, 15mm CS/SS Socketed Ball Valve etc, connecting the newly supplied pipes and accessories with reusable items and making ready for connection with header and suction pipes etc complete.

OD48164/2023-2024:Dismantling carefully without damage 5Amps 230VAC IP67 rated Die Cast Aluminium Bourdon Tube Blind Pressure Switch and its pipe assembly from header pipe and cable connections from Pressure switch and Starter, supply of vertical connection and air release accessories of Pressure Switch such as 20NB MS Hex Nipple-1No, 20mm CS Sch80 pipe-0.30M, 20NB D/F CS Ball Valve-1No, 20NB CS/SS Flanges-2Nos, 20x10mm SS Reducer -1No, 10mm SS Tube-0.30M, 10mm SS Hex Nipple-2Nos, other accessories if any required for connecting Pressure Switch with Header pipe, The following items from dismantled assembly shall be reused such as 5Amps 230VAC IP67 rated Die Cast Aluminium Bourdon Tube Blind Pressure Switch, Single Run 600 Volts 3 core 1.5 Sqmm Sheathed armoured Copper conductor Cable for a length of 60Mtrs from Pressure Switch to Starter, 10mm SS pipe and its assembly such as 10mm SS Socketed Tee, 15mm SS Flanged Adapter, 15mm CS/SS Socketed Ball Valve etc, connecting the newly supplied pipes and accessories with reusable items and making ready for connection with header pipe etc complete. Supply of 50mm B class GI pipe-1.45M long welded with MS base of 20x20cm size with MS Nuts & bolts for support of Pressure Switch system, supplying additional required length of cables and glands, connectors, end termination kit etc if required for reconnecting Cable with Switch and Starter etc complete.

OD118348/2023-2024:Dismantling carefully without damage Local Operation Start/Stop Push Button Switch Box and cable connections from Switch Box and Starter, The following items from dismantled assembly shall be reused such as Local Operation Start/Stop Push Button Switch Box and Single Run 1100 Volts 4 core 2.5 Sqmm Sheathed armoured Copper conductor Cable for a length of 60Mtrs from Switch Box to Starter, Supply of 100x50mm MS Channel-1.45M long welded with MS base of 20x20cm size with MS Nuts & bolts for support of Switch Box, supplying additional required length of cables and glands, connectors, end termination kit etc if required for reconnecting Cable with Switch Box and Starter etc complete.

OD47487/2023-2024:Supplying 250mm (ID) dia 8mm thick MS pipe and specials such as standard size MS Flanges, Bends etc for Suction pipes of two pump sets, cutting MS pipe to required length, grinding cut ends, welding with specials, cutting, dismantling and removing existing 200mm dia MS pipes, valves and specials, aligning new pipes, placing in position to lines and levels, welding and jointing with specials, painting the pipes with synthetic enamel paint two coats, Conveying and fixing 250mm dia Double Flanged Gate Valve, Dismantling joint etc with pipe, jointing with existing 1219mm dia pipe manifold manifold by welding and making good pipe manifold including making 250mm dia holes in 1219mm MS pipe manifold, necessary demolition of Anchor Blocks for dismantling existing pipes, cost and conveyance of MS pipes, specials, consumables such as Nuts & Bolts, Gaskets, providing new Anchor Blocks etc but excluding cost of Valve etc complete. Rate is inclusive of fixing charges of all accessories of Suction pipe, hence length of MS pipe only will be measured for payment.

OD47583/2023-2024:Supplying 200mm (ID) dia 8mm thick MS pipe and specials such as standard size MS Flanges, Bends etc for Header pipes of two pumpsets, cutting MS pipe to required length, grinding cut ends, welding with specials, cutting, dismantling and removing existing 200mm dia MS pipes, valves and specials, aligning new pipes, placing in position to lines and levels, welding and jointing with specials, painting the pipes with synthetic enamel paint two coats, conveying and fixing 200mm dia Double Flanged Butterfly Valve, Check Valve, Dismantling joint etc with pipe, jointing with existing 200mm pipe including necessary demolition of Anchor Blocks for dismantling existing pipes, cost and conveyance of MS pipes, specials, consumables such as Nuts & Bolts, Gaskets, providing new Anchor Blocks etc but excluding cost of Valve etc complete. Rate is inclusive of fixing charges of all accessories of Suction pipe, hence length of MS pipe only will be measured for payment.

OD47759/2023-2024:Supply of 200mm Flanged MS Telescopic Adjustable type Dismantling joint.

OD47763/2023-2024:Supply of 250mm Flanged MS Telescopic Adjustable type Dismantling joint.

OD118763/2023-2024:Supply of 80mm MS pipe of Heavy duty class of required length, cutting and making hole of suitable size in existing 200mm delivery line, jointing 80mm MS pipe with 200mm delivery line by welding, supplying and providing MS flanges for connecting Valves, Connecting 80mm Gate Valve and 80mm Air Valve including cost and cnveyance of 80mm MS Pipe, Flanges, Gaskets, Nuts & Bolts but excluding cost of valves etc complete

OD115394/2023-2024:Providing new water line to Pump from existing 50mm Service water line using 12NB MS Heavy duty pipe for a length of 2M including cost of 15mm CS Socketed Ball Valve -1No, 15mm CS Union -1No, 15mm MS Elbow -1No, 15mm MS Hex Nipple -2Nos, welding charges, cost of consumables etc complete

OD48060/2023-2024:Supply and providing of Double Run 3core 25sqmm XLPE insulated Unearthed Armoured Aluminium LT Conductor Cables for working voltages upto and including 1100volts conforming to IS 7098/Part-I for XLPE or equivalent size single run cable as per site condition with average single run length of 60Mtrs from Starter to Motor suitable for the above pumpset including cost of cable, glands, connectors, Lugs etc.

OD48167/2023-2024:Dismantling and removing existing pump, motor, RCC foundation, MS Base plate and Starter, Cables, Water line, cutting and removing required depth of RCC for making new foundation etc complete.

OD48166/2023-2024:Providing and fixing new RCC Foundation of size 2.00 x 1.20 x 0.80M in 1:1.5:3 mix and suitable MS Base plate for pumpset with proper anchoring at base of foundation including cost of MS base plate, base plate Bolts, foundation bolts etc

OD48165/2023-2024:Erection of Pumpset by aligning and fixing Motor and Pump on Base plate with Bolts and Nuts, connecting Suction and delivery Lines with pump by fabrication suitable size MS reducers, Coupling Pump with Motor, welding and connecting Pressure gauges, Pressure switch and its accessories with Header and Suction pipes, Providing cable connections to Motor from starter, cable connections for Pressure Switch and Local Push Button Switch Box with Starter, providing supports of Pressure Switch and Local Push Button Switch, connecting 15NB water line with pump, Providing earthing to Motor by using 25x3mm Copper Earth strip and connecting with existing Earthing system, Commissioning the pumpset, Trial Run etc complete.

JALAYA TECHNOLOGIES PRIVATE LIMITED

Bidder Name

Water World

JALAYA TECHNOLOGIES PRIVATE LIMITED