PROVN OF GUARD ROOM WITH TOILET TO ACCOMMODATE 02 NCOS AND 06 OR NEAR GATE NO.2 AND SPECIAL REPAIR TO VERANDAH AND UTENSIL WASHING POINT AT RECRUIT MESS (BLDG NO. P-922) OF NO 2 TRAINING BATTALION, SPECIAL REPAIR TO 04 X TOILETS IN PAO(OR) AT BENGA

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/ loose soil complete all as specified and directed.

M&L for PCC (1:4:8) type D2 (using 40mm graded crushed stone agregate) as in foundation, filling and mass concrete complete all as specified and directed.

Use and waste of flat Form work ( Rough finished ) to sides of concrete foundations, rafts, plinth beams and similar work, vertical or batter complete all as specified and as directed.

Use and waste of Square, rectangular or polygonal Form work ( Rough finished )to sides of pillars, posts, struts, columns and stanchions complete all as specified and as directed.

Use and waste formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed.

Use and waste of Fair finished flat Form work to soffits of suspended slabs such as roof slabs, floor slabs and similar work not exceeding 200 mm thick complete all as specified and as directed.

Use and waste of flat Form work ( Rough finished ) to surfaces of concrete sides and soffits of floor or roof beam, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed.

Use and waste of Fair finished flat Form work to soffits of chajjas and similar work complete all as specified and as directed.

M&L for Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

M&L for Mild steel TMT bars 5 to 10 mm dia., and over cut to length, bent to shape required, as in stirrups, spacers and binders including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

M&L for Reinforced Cement Concrete (Nominal Mix) Type A1 1:11/2:3 (using 20 mm graded stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M&L for Reinforced Cement Concrete (Nominal Mix) Type A1 1:11/2:3 (using 20 mm graded stone aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and as directed.

M&L for RCC 1:1.5:3 Type A1 (Nominal mix) (using 20mm graded granite stone aggregates) as in Beams, lintels and etc., complete all as specified and as directed.

M&L for RCC Type A1 1:11/2:3 (using 20mm graded granite stone aggregates) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L for RCC Type A1 1:11/2:3 (using 20mm graded granite stone aggregates) as in chajjas and in shelves and the like complete all as specified and as directed.

M&L for brick work with old size sub class 'B' bricks in cement mortar (1:6), straight or curved on plan exc 6m mean radius complete all as specified and directed.

M&L for brick work with old size sub class ‘B’ bricks in half brick thick walls in cement mortar (1:4), straight or curved on plan exc 6 m mean radius complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar (1:6) on fair faces of brick work of concrete surfaces of walls, finished even and smooth (without using extra cement) complete .

M&L for preparing newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of 1mm thick wall care putty over one coat of OBD primer complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of concrete of celing in cement mortar (1:4), finised even and fair complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M & L for hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and leveled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M & L for Non - skid Ceramic joint free colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and incl 15 mm thick screed bed in CM 1:6 complete all as specified and directed.y and pointed in white or coloured cement to match complete all as specified

M & L for Non - skid Ceramic joint free colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and incl 15 mm thick screed bed in CM 1:6 complete all as specified and directed.y and pointed in white or coloured cement to match complete all as specified

M&L for joint free non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular), area of each tile exc 0.06 sqm but n.exc 0.11 sqm, laid in flooring over & including 15mm thick screed bed or bedding layer in cement mortar (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for joint free coloured glazed ceramic tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:4 including Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

S&F Factory made Pressed steel frame of size 125 mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate and PCC 1:3:6 type C1 concrete filling in hollow portion complete all as specified and as directed.

S&F 35mm thick factory made 2nd class hard wood plain framed panelled shutters (two panels) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rails and stiles as per IS1003 (Part I), kiln seasoned and chemically pressure treated and fixed to chowkhat complete all as specified and directed.

S&F Factory made gauged shutter made out of angle iron 35mmx35mmx5mm main frame and 25mmx25mmx5mm and 3mm thick shutter frame and 10mm Square bars at 150mm centre to centre grill complete with stainless steel fly proof wire mesh having 0.63mm nominal dia wire and 1.4mm average with aperture, with locking arrangement, 100mm hinges, suitable MS tower bolt and aldrop bolt including two coats of synthetic enamel paint over a coat of red oxide primer complete all specified and directed by Engr-in -charge.

M & L for preparation of newly steel and iron surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

M & L for preparation of newly surface of wood and wood based surfaces by knotting, stopping etc of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

S&F factory made solid PVC door shutter 30mm thick style consisting of frame made out of MS tube for top and bottom rails.MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for syles and plain colour PVC sheet for top and lock rail and bottom rail on either side and as gap insert for top top rail & bottom rail:Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specifications complete all as specified and as directed.

S & F [ISI marked] 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S & F [ISI marked] 100 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F 125 mm long [ ISI marked ] extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.

S&F in repairs, [ ISI marked ] aluminium alloy floor door stopper double legged best quality with rubber shoe complete all as specified and directed.

S&F 100 mm long [ ISI marked ] medium weight cold rolled mild steel butt hinges complete all as specified and as directed.

M&L Powder Coated aluminium three track sliding window with using standard medium weight Jindal sections, with jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as suitable handle/locking arrangement (1No.) per shutter, complete all as specified and as directed .

S&F powder coated aluminium sections for ventilator shutters, fixed type aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, including and deco grill and all necessary fittings complete all as specified and as directed. Note: The Rate is also inclusive of providing 4 mm thick pin headed glass but payment shall be made for weight of Aluminium sections used.

S & F 8 mm thick Aluminium grill of make "Deco grill" and DG - 104 model fitted in to suitable Aluminium channel and fixed to windows / ventilators complete all as specified and as directed.

M&L for Factory made built in steel cup board with pressed steel frame of size 75 mm x 45mmx 1.25 mm thick with pressed steel shutter 1mm thick Godrej pattern fixed to masonry wall by hold fast made out of 25mmx3 mm flat iron including MS hanging rod of 10 mm dia with bracket fixed on inner side of one leaf of shutter and on other leaf provision of MS peg set of 3 pegs including spray painting with two coats of synthetic enamel paint over one coat of red oxide primer and locking arrangement and fixing in position and making good disturbed portion in CM 1:3 or PCC 1:2:4 type B-1 as required complete all as specified and as directed.

S&F in repairs, vitreous china wash hand basin, white flat back size 550 x400 mm excluding pillar tap but including waste coupling, waste pipe and a pair of MS bracket etc complete all as specified and directed.

S&F vitreous china urinal bowl type (with flat back or corner wall type), white, including bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws and CP brass water spreader, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe (excluding supply pipe to flushing cistern and trap) including waste pipe complete all as specified and as directed.

Supply & Fix in repairs Vitreous China Squatting pan, "Orissa" pattern, size 580 x 440 mm white with integral foot rests and setting the trap and pan in lime concrete 1:2:5 minimum 150 mm thick all round and finished just below level of rim of pan to receive the floor finishing complete all as specified and as directed.

Supply and Fix in repairs [ ISI MARKED ]10 litres capacity PVC valveless, syphonic action type flushing cistern low level white with suitable inlet, Ballvalve , 20mm dia Float Valve and handle including brackets complete all as specified and as directed

S&F 15 mm dia PVC connection 450 mm long with PTMT nuts at both ends with rubber washer and fixed compete all as specified and directed.

S&F 15 mm bore bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F 15mm Fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. (Model : 8903 Make : Prayag OR EQUIVALENT RANGE OF Jaquar, pearl ).

S & F stop/angle cock ISI marked fancy type, chromium plated, screw down high pressure with crutch or butterfly handle screwed both ends suitable for iron pipe of 15 mm bore complete all as specified and directed. (Model : COS-103053/MQT-513KN Make : ESSCO (Jaquar) OR EQUIVALENT RANGE OF Prayag, JAQUAR, Pearl).

M&L Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union,125 mm size complete all as specified and directed.

S&F Soap Dish Recessed Type (Stainless Steel) and fixed to wall complete all as specified and as directed. Make : Jaquar model AHS-1531 / Plumber / Parko

S&F in repairs, mild steel chromium plated 600mm long and 20mm dia towel rail 'D' type, fixed to wall with CP steel screws etc complete all as specified and directed.

S&F PTMT grating (round) 100 mm dia fixed in cement mortor 1:3 over floor/nahani trap (with hole or without hole) complete all as specified and directed.

S&F Brass chromium plated bottle traps of 32 mm bore for wash basin with inlet and outlet screwed for pipe or connections including necessary packing, union and cap complete all as specified and as directed.

S&F 110 mm dia PVC (SWR) nahani trap with grating including jointing to waste pipe, fixed in cement concrete (1:2:4) type B-1 complete all as specified and directed.

S&F 75mm dia PVC (SWR) nahani trap with grating including jointing to waste pipe, fixed in cement concrete (1:2:4) type B-1 complete all as specified and directed.

S&F 110mm dia bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 75mm dia bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls including necessary clamps etc complete all as specified and directed.

S&F PVC (SWR) gully trap of size 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

Cutting into existing manholes for connecting new drains making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B1, smooth finished and reforming benching as required for 100 / 150 mm dia., of pipe complete all as specified and as directed.

S&F PVC (SWR) vent cowl 110mm bore complete all as specified and directed.

Supply and Fix in repairs 1000 litres capacity Rotational moulded Polythene [HDPE] Water Tanks, [ ISI Marked ] triple layered, Cylindrical & Vertical Type hoisted and fixed in position including provision of 40mm / 25mm dia spouts for connecting inlet, outlet, over flow and washout pipes, suitable PTMT ball valve fixed in position all as specified in SSR Part I complete all as specified and as directed.

S&F concealed 15mm bore GI tubing (ISI marked), medium grade with all fittings and fixed to walls and ceilling or laid in flooring including connection etc including taking down old tubing complete all as specified and directed.

S&F 20mm bore GI tubing (ISI marked), medium grade with all fittings and fixed to walls and ceiling or laid in floor including taking down existing tubing complete all as specified complete all as specified and directed.

S&F in repiars 20mm bore gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 20 mm dia complete all as specified and as directed.

S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 mm - 210 gms . / 25mm-455gms/ 40mm - 690 gms)

S&F 75mm dia bore PVC (SWR) bends / elbow complete all as specified .

S&F 75mm dia bore PVC (SWR) junction single (Single T), equal or unequal complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends any radium complete all as specified and directed.

M&L 110mm PVC (SWR) WC connector with lip ring complete all as specified

Supply and Fix APP polymeric waterproofing membrane of 3.6 Kg / Sq.M incorporating a centre core of 90 micron thick HMHDPE film including coating the surface with a coat of water based bitumenous Primer @ 100 gms / Sqm, followed by a coat of blown bitumen of grade 85 / 25 or 90 / 15 @ 1.2 Kg / Sqm each at top and bottom of the membrane complete including sealing all joints by thermo fusion with minimum 10cm overlap and finished with a coat of bituminous aluminum paint @ 100 grams per Sq.m on top for water proofing treatment complete all as specified and as directed.

M&L for 75mm thick cement concrete (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in flooring, path, plinth protection and the like, laid in alternate bays n.exc 2.50 Sqm and joints filled with mastic filling including finishing even and smooth without using extra cement complete all as specified and directed.

M&L100mm thick Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in sub base etc complete all as specified and directed.

M&L coloured cement concrete tiles 25cm x 25cm x 20mm thick, machine pressed with gray cement and pigment set jointed and pointed in neat cement slurry in floors, and cut and polished over and including 20mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for providing PCC type B-1, 1:2:4 (using 20 mm graded granite stone aggregates) as in lintels upto 1.5m clear span, cills, steps; eismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

S & F 250 mm long [ISI marked] Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy, complete all as specified and as directed.

S&F 25 mm dia stainless steel fancy type curtain rod in suitable size with and including mild steel fancy type brackets, stops of matching colour and necessary curtain rings, side caps etc complete all as specified and directed.

S&F rolled mild steel in joist, channel, angle or tee sections fixed independently , without connecting plates etc quality conforming to Fe 410 W (Gde E-250 quality A) including dismantling of iron complete all as specified and directed.

Removing excavated surplus soil to a distance exc. 250 m but n exc. 500 m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

Returning filling in with excavated soil including spreading, leveling, watering & well ramming in layers not exc 25 cm thick complete all as specified and directed.

M&L for 20-25 mm thick machine cut kota stone slab, laid over and including 20 mm thick screed bed in cement mortar (1:6) as in flooring, set & jointed with grey cement slurry and pointed in cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polishing complete all as specified and directed.

M&L for Machine cut kota stone slab 20-25mm thick in vertical surfaces such as skirting, laid over and including 10mm thick backing coat in cement mortar (1:4), set in neat grey cement slurry and jointed with grey cement mixed with pigment to match the shade of the slab including rubbing and polishing with mirror finish complete all as specified and directed.

M&L for Precast cement concrete 1:2:4, type B1 (Using 20 mm graded stone aggregate) as in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and as directed.

M&L for 40mm thick cement concrete (1:2:4) type B1 (using 20mm graded stone aggregates) as in benching/channel/drain/, including necessary form work, finished even and smooth using extra cement complete all as specified and directed.

M&L for Salt-glazed stoneware drain pipes laid in trenches and jointed as specified for 200mm bore pipe complete all as specified and directed.

M&L for Concrete bed to 200mm dia drain pipes including packing under, and hunching against the sides of pipes after they are laid and tested; in cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate complete) all as specified and directed.

M&L for 5mm thick rendering in cement mortar (1:4) on fair faces of concrete surfaces of ceiling, finished even and smooth without using extra cement complete all as specified.

M&L for preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

Demolition of brick work or stone / boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed .

Material and labour for brick work built in CM (1:6) straight or curved on plan exceeding 6 metre mean radius using sub class ‘B’ bricks (EXCEPT BRICKS)complete all as specified and as directed. Note: The bricks obtained from demolition shall be used.

Taking down cement or cement lime plaster on brick or stone walls etc including racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed.

M/L for three coat of white wash on New surfaces (wall) including all prereration complete all as specified & directed

M&L for preparation of old decorated surfaces (plastered/ un-plastered) of ceiling incl cornices by brooming down with steel brush, scrapping down smoke soot, moulds, moos and efflorescent salts and trading oil and greasy spots and applying One coat of white wash on ceiling complete all as specified and directed.

M&L for preparation of old decorated wall surfaces by complete removal of existing treatment on walls including cornices by broming down with steel brush, scrapping down smoke soot, moulds moss and efflorescent salts and trading oil and grease spots and applying one coat of cement base paint complete all as specified and directed.

M&L for preparation of old decorated wall surfaces including cornices by broming down with steel brush, scrapping down smoke soot, moulds moss and efflorescent salts and trading oil and grease spots and applying one coat of distemper oil bound emulsion by using rollers complete all as specified and directed.

Taking down shutter from the frame of any discription n exe 2 sqm each and refixing in same opening in same openinig and necessary repair complete all as specified and directed.

Demolition of Plain Cement Concrete of any description and in any position not otherwise specifically provided and removing rubbish to out side MD land complete all as specified and as directed.

Dismantling of floor, hearth and wall tiles / stone slabs of any description or thickness as in floors, skirtings etc laid bedded and pointed in any mortar and removal of rubbish to out side MD land complete all as specified and as directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. all as specified and as directed by engineer in charge.

M&L Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified and as directed by engineer in charge.

M&L for 18 to 20mm thick marble stone as in platforms / counter slab/flooring and laid in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including taking down old stone slab complete all as specified and directed.

M&L 25 mm thick PCC (1:2:4) Type B-1 using 20 mm stone aggregate as in sub floor /roof/chajja complete all as specified and directed.

M&L Rounding to edges of marble / stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

Taking up or downold unseviable rusted GI tubing and connection including cleaning for re-fixing 15 mm bore of pipe or removal to store including S&F GI tubing 15 mm bore, medium grade with all fitting and concealed to wall ceiling or laid in floor complete all as specified.

Taking up or downold unseviable rusted GI tubing and connection including cleaning for re-fixing 20 mm bore of pipe or removal to store including S&F GI tubing 20 mm bore, medium grade with all fitting and concealed to wall ceiling or laid in floor complete all as specified.

Taking up or downold unseviable rusted GI tubing and connection including cleaning for re-fixing 25 mm bore of pipe or removal to store including S&F GI tubing 25 mm bore, medium grade with all fitting and concealed to wall ceiling or laid in floor complete all as specified.

M&L for preparation of old decorated surfaces (plastered/ un-plastered) of ceiling incl cornices by brooming down with steel brush, scrapping down smoke soot, moulds, moos and efflorescent salts and trading oil and greasy spots and applying Two coat of white wash on ceiling complete all as specified and directed.

M&L for preparation of old decorated surfaces (plastered/ un-plastered) of walls incl cornices by brooming down with steel brush, scrapping down smoke soot, moulds, moos and efflorescent salts and trading oil and greasy spots and applying Two coat of white wash on walls complete all as specified and directed.

Taking down old U/S wooden /steel chowkhat with shutter nexc 1.50 sqm each and removing from site.

Taking down shutter from the frame of any discription n exe 2 sqm each and refixing in same opening in same openinig and necessary repair complete all as specified and directed.

M&L Powder coated (Thickness or powder coating not less than 50 micron) Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws & with deco grill of approved design & stainless steel wire cloth on the outer side of frame & trade pattern adjustable louvers with suitable mechanism for tilting /opening closing etc & suitable opening for exhaust fan all as per sample kept in GE office & fixed in position etc. complete all as specified and directed and directed by engineer in charge. (Note : Glass pane in louvers shall be measured & paid separately)

S&F Powder coated (Thickness or powder coating not less than 50 micron) Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door 300 mm long,3 nos hinges 100 mm sizemortice lock 3 lever 100 mm size,anodised aluminum snap beading screws including powder coating of approved color complete all as specified.

S&F PTMT Butt hinges 100 mm complete all as specified and directed

S&F 150 mm long PTMT tower bolt of complete fixing to door complete all as specified and directed

S&F 150 mm long PTMT handle bolt of complete fixing to door complete all as specified and directed

S&F 300mm long Aluminium sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

M&L for 5.5 mm thick sheet glass one side frosted and glazing with oil putty or fixed with beads or in louvers in square n.exc. 0.5 sqm in each pane complete all as specified and directed.

M&L 18mm to 20mm thick granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like laid on screed bed in cement mortar (1:4), 15mm thick including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite,Providing edge moulding including machine polishing to edge to give high gloss finish etc. including taking down existing platform complete all as specified and as directed.

Dismantling of floor of WC and bath not exc 600mm deep and removing out the cinder/concrete from sunken portion, cleaning of RCC surface to remove dust, loose particle with compressed air or any other suitable method depending on site conditions, grinding any sharp edges etc complete all as specified and directed. (b) Cleaning or RCC surface to remove dust, loose particle etc with compressed air or any other particles or any other suitable techniques on site conditions etc.(c) M&L for a glass fiber reinforced acrylic modified cementitious coating system with base coat @ 1.50 Kg/Sqm glass fiber reinforcement and top coat with Sika Top® Seal-107 @ 1.50 Kg/Sqm or equivalent of Fosroc or MC Bauchemie India Pvt Ltd.(d) M&L for protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound with as specified.(e) M&L for providing 25mm dia GI pipe spout projecting at least 150mm beyond outer face of wall.(f) M&L for sunken portion filled with 40 mm graded brick bats and finished with 50 mm thick PCC 1:2:4 type B1 all as specified and directed.(g) The area for payment measure net floor area.(h) Cost of the above aspect shall be deemed to be included in the quoted rates of the respective item and nothing extra shall be paid on this account. Note : 1. The work will be executed by authorised manufacturers /applicator. 2. Plan area only be measured for payment purpose.

Dismantling CI Pipe with fittings work of any description all as specified and as directed.

S&F 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed in walls complete all as specified and directed .

S&F 75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed in walls complete all as specified and directed .

S& F PVC (SWR) junction single, (Single T) equal or unequal 75mm dia with access door complete all as specified and as directed.

S& F PVC (SWR) junction single, (Single T) equal or unequal 110 mm dia with access door complete all as specified and as directed.

S&F for 100mm bore pipes stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall etc; complete all as specified.

S&F for 75mm bore pipes stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall etc; complete all as specified.

Dismantling water tanks and removing to store Nexc 2000 ltr capacity including S&F for 2000 ltr capacity Rotational moulded Polythene [HDPE] Water Tanks, [ ISI Marked ] triple layered, Cylindrical & Vertical Type hoisted and fixed in position including provision of 40mm / 25mm dia spouts for connecting inlet, outlet, over flow and washout pipes, suitable PTMT ball valve fixed in position all as specified in SSR Part I complete all as specified and as directed.

Supply & Fix in repairs Vitreous China Squatting pan of pattern long pan, size 580 mm white with `P' or `S' trap, front or back inlet and foot rests any pattern including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in lime concrete 1:2:5 minimum 150 mm thick all round and finished just below level of rim of pan to receive the floor finishing complete all as specified and as directed.

S&F in repairs vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and as directed.

S & F in repairs 10 Liters capacity, low level flushing cistern, PVC, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC 32mm bore waste pipe, including brackets and connections to pipe of complete all as specified and as directed.

S&F stop cock/angle valve 15 mm nominal bore brass chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directeed

S&F in repair CP fancy type bib tap cast copper alloy with crutch or butter fly handle, screwed down screwed for iron pipe 15 mm bore of tubing complete all as specified and directed

S&Fin repair Vitreous China wash basin oval type white size 580 x 450mm excluding taps , but incl waste pipe, waste coupling, and fixed in approved pattern and making serviceable complete all as specified and directed by Engineer in charge.

S&F for 32mm PVC waste pipe for flushing cistern complete all as specified and directed.

S&F 25 mm bore Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed with all necessary fitting and fixer reducer elbow etc complete all as specified and directed

S&F in repair 15 mm Fancy type pillar tap cast copper alloy with capstan head chromumum plated screwed down high pressure with or without lettered hot or cold with long screwed shank and fly nut screwed for iron pipe fixed complete all as specified and directed

S&F in repair Tubular towel rail, 20mm dia, D type, 60cm long between flanges including brackets all as specified and as directed by engineer in charge.

S&F in repair Stainless steel cromium plated Soap dispencer, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repair vitreous china urinal half stall type white fixing plugs bedding urinal against wall in cement mortar 1:2 securing to plug with and including 60 mm long brass screws urinal spreader of PTMT any color fixing with 15 mm dia pipe PVC pointing aroung urinal back in cement complete all as specified and directed

S&F in repair 12 mm thick Toughned glass as in urinal partitions fixed with suitable clip, rounded at edge and approved pattern and similar work including cutting to shape, drilling holes required allas specified and as directed by engineer in charge.

Material and labour for point wiring with 1.5 sq mm PVC insulated, unsheathed, stranded copper conductor (FRLS) cable single core 1100 Volt grade in and including rigid PVC conduit medium grade 20mm dia or more ISI Marked concealed conduit/ casing caping and conduit accessories and cutting chases of suitable girth where required on brick/concrete surface & making good disturbed surface,provision of GI/Pressed steel terminal switch box with plastic laminated sheet 3 mm thick fixed with brass screw and washers along with 1.5 sq mm PVC insulated unsheathed stranded copper conductor cable ( FRLS ) as earth wire connected with main common earth dolly complete all as specified and directed for the following :- (a) One light/fan/bell/exhaust fan point controlled by one, one-way Piano type switch 5/6 Amp complete all specified and directed.

One 3pin/5pin 5/6 Amps socket out let on same board controlled by one, one-way Piano type switch complete all specified and directed.

One 3pin/5pin 5/6 Amps socket out let on independent board controlled by one, one-way Piano type switch complete all specified and directed .

All as per item No 147 here-in-before but wiring with 2.5 sqmm single core multi stranded copper condcutor 1100 V grade PVC insulated FRLS but unsheathed single core for 16 Amps power point on independent board and 2.5 sqmm FRLS cable as earthwire complete all specified and directed.

S&F switch piano flush type white finish 5/6 Amps, single pole one way , 230 volts, 50 hz complete all as specified & directed.

S &F socket out let 2 pin 5/6 Amps & 3 pin 5/6 Amps flush type, 230 volts, 50 hz all as specified and directed.

S&F switch piano flush type white finish 15/16 Amps single pole one way, 230 volts, 50 hz all as specified and directed

S &F socket out let 5 pin 15/16 Amps & 3 pin 5/6 Amps flush type, 230 volts, 50 hz all as specified and directed.

S&F fan regulator , fulsh stepped type ,electronic ,450 watt complete all as specified and directed.

M&L ceiling rose 3 terminal / PVC/ polycarbonate, isolated body all as speccified and directed

Supply and fix sheet metal enclosures with metal socket and plug top Single pole and neutral enclosure with a two pin and earth plug and socket complete ISI marked, 230/240 volts, 50 hz with one single pole MCB SP 20 Amps all as specified and directed.

Supply and fixing sheet metal enclosure double door type for TPN (Triple Pole and neutral) 415 Volt AC 4 way with 200 Amps rated busbar all as specified and directed.

Supply and fixing sheet metal enclosure double door type for MCBs DB SPN(Single pole and neutral) 240V AC 8 way with 200 Amps rated busbar all as specified and directed.

Supply & fixing MCB , SP, AC, 240 volts of 06 to 32 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed.

Supply & fixing MCB, SPN, AC, 240 volts of 63 Amps capacity 10KA, 'C' series and making connections with suitable size of copper lugs complete all as specified & directed.

Supply and fix MCB 100 Amp, 10 KA, TPN, 'B' curve, 415 V, 50 Hz including making connections with suitable size of copper lugs complete all as specified & directed.

S&F T-5 LED tube light batten 20 watts 4 fts extruded aluminium housing, translucent diffuser with LED light source , 2000 lumen, natural white ,surge protection range- 2KV, voltage protection range 120-280 VAC with intergrated driver and surge protection and making electrical connection upto ceiling rose with white PVC sheathed three core copper multistranded wire of size 0.5 sqmm complete all as specified and directed.

Supply and fix LED 25 watt Building security light fitting mounting type made out of one piece in pressure die-cast aluminium housing with high efficient LED as lighting source and PC Cover separate compartment for driver,including bracket clamp and fixing accessories complete with electronic driver and all accessories making electrical connection upto ceilingg rose with 3 core 05 sqmm multistranded copper sheathed cable. The fitting shall IP 66 protection, duly prewired complete all as specified and directed.

Supply and fixing sub main wiring two single core 6 sq mm PVC insulated unsheathed stranded copper conductor cable ( FRLS ) 1100Volts grade drawn in & including rigid PVC conduit 20mm dia or more medium grade concealed in wall along with 6.00 Sq mm PVC insulated unsheathed copper conductor cable (FRLS ) as earth wire and wire connected with main earth dolly including cutting chasing and making good disturbed portion all as specified and directed

Supply and fixing sub main wiring two single core 4 sq mm PVC insulated unsheathed stranded copper conductor cable ( FRLS ) 1100Volts grade drawn in & including rigid PVC conduit 20mm dia or more medium grade concealed in wall along with 4 Sq mm PVC insulated unsheathed copper conductor cable (FRLS ) as earth wire and wire connected with main earth dolly including cutting chasing and making good disturbed portion all as specified and directed

Supply and fix ventilating / PVC exhaust fans fancy square type 225mm sweep with plastic fiber body heavy duty 230 Volt AC, single phase complete with plastic louvers and including making suitable size of holes in wall for fixing the fan & making good including making electrical connection with ceiling rose complete all as specified and directed.

S&F BLDC BEE 5 Star rated Ceiling fan (without remote) complete with three blades down rod , accessories 230 V, 1200mm sweep with service value of 6 and minimum 210 CFM, double bearing with brushless direct current motor including connecting with three core multi-stranded copper conductor wire of size 1.0 sqmm from ceiling rose to connector of fan and writing MES No. on fan complete all as specified and directed.

Supply and fix in replacement electric water heater,storage type steel body with steel inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated, ISI Marked, 240 V, 50 Hz complete with following accessories:- (a) Safety Valve (b) Thermostate Valve (c) NRV (d) Hot and Cold PVC Connection (e) Chrome plated Angle Valve of bore size 15 mm for hot and cold water- 02 Nos (f) Chrome Plated Bib tap of bore size 15 mm for hot water - 01 Nos

Supply and install desert cooler electric driven (single phase) 230 Volt 50 Hz having steel fabricated cabinet of size 26 inch x 17 inch x 50 inch with 22 SWG PGI sheet water storage tank including round chrome double diversion grills, PVC fills Honeypad, Three speed copper wounded Motor 1400 RPM with aluminium blade including submersible water lifting pump suitable to lift water upto 6 feet including Speed regulator,electrical cord three core and plug top 5 Amp complete in respect with audjustable iron wheel stand all as specified.

Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground. (earth pit not less than 2.25 mtr depth below ground level at any type of strata ) with top edge of the earth plate not less than 1.5mtr below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15cm all around the plate. connected by 25x4 mm GI strip as earth lead by means of brass nuts and bolt,thimbles check nuts, washers including concrete chamber of PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish, internal surface of concrete chamber shall be given internal dia 300mm x300mm, 15mm thick plaster in CM 1:4 funnel with wire mesh, RCC pit cover of 320x320x80mm size (1:2:4) Type B1 using 20mm graded stone aggregate rainforced with XPM all as shown in electrical plate No 3 of MES SSR Part-1(2009) and specified including and provision of GI wire upto 7.5 mtrs long with 40 mm dia light grade Gi pipe protection and watering pipe of GI 20 mm bore, medium grade, including all exavation and earth work and connecting the earthing wire to panel, including testing on completion complete all as specified and directed by Engr-in-charge. Note:- (i) RCC pit cover shall be precast of RCC(1:2:4) type B1, 80mm thick rainforced with XPM weighting not less than 4kg/sqm in lieu of CI cover. (ii) Cost of additional GI strip more than 7.5 mtrs will be measured and paid seperately under relevant items.

Supply and fix galvanised steel water tubing medium grade including all fittings such as bends, elbows, tees, reducers, sockets, union etc and laid in floor fixed on wall or ceiling of size 20 mm complete all as specified and directed.

Supply and fix galvanised steel water tubing medium grade including all fittings such as bends, elbows, tees, reducers, sockets, union etc and laid in floor fixed on wall or ceiling of size 15 mm complete all as specified and directed.

Supply and fix or lay in trenches galvanised steel water tubing medium grade including all fittings such as bends, elbows, tees, reducers, sockets, union etc and laid in floor fixed on wall and ceiling complete all as specified and drected of size 20 mm bore complete all as specified and directed.

Drilling and tapping cast iron water mains (in position) for branch connection of the internal dia of 25 mm complete all as specified and directed.

M&L for Straight plain brass ferrules (or connecting screws ) screwed both ends and fixed to water mains for tapping branch connection of size 20 mm bore complete all as specified and directed.

Supply and Fix Gun metal gate valve, ISI marked, with iron wheel head screwed both ends for iron pipe, fixed in repairs complete of size 20 mm bore complete all as specified and directed.

Supplying & laying LT UG cable ( Conforming to IS 1554) ISI marked1.1 KV grade XLPE insulated PVC sheathed steel armoured aluminum stranded conductor in trenches / ducts / through GI pipe under roads of size 10 sqmm 4 core complete all as specifed and directed. Note;- The earth work shall be measured and paid sepretely under appropriate item of Sch A

Supply and laying clean dry river sand for cushioning in layers, 8 cm before lying of cable and 15 cm after lying of cable (total 23 cm) in trenches complete all as specified and directed. Note:- Thickness of sand cushioning shall be measured as 18 cm after punning for payment)

Supply and laying old size sub class ‘B’ bricks for cable protection, laid dry flat adjacent to each other across the length of cable complete all as specified and directed.

S&F in replacement, 32mm dia bore GI tubing, light grade with all fittings for cable protection including GI clamps, nut & bolts and washers or burried in ground complete all as specified and directed.

RAJENDER CONSTRUCTION CO

AMAR NATH SHARMA

IRFANAHMAD CONTRACTOR

M/s MAA SHAKTI CONSTRUCTIONS AND SUPPLIERS

M/S MSD & Associate

SMG Construction