Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.7 LAccepted-AOC | L1 | Accepted-AOC Being lowest bidder | |
| 2 | L2₹39.7 L+₹4.8 L (13.7%)Rejected-Finance | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹45.2 L+₹10.2 L (29.2%)Rejected-Finance H NO 266 V P O PILKHANI DISTT AMBALA 133104 | AMBALA | HARYANA | 133104 | L3 | Rejected-Finance Other than lowest bidder |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
30 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE UTILITY AMBALA
GE UTILITY AMBALA CANTT 133001
REPAIR MAINT AND CLEANING OF LAGOONS INCLUDING CONNECTED ITEMS OF SEWAGE INSTALLATIONS OF SECTOR A B AND C UNDER GE UTILITY AMBALA CANTT
2022_MES_542089_1
CA NO GE U AMB T 24 OF 2022-23
Open Tender
Civil Works
Item Rate
240 days
GE UTILITY AMBALA CANTT
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE UTILITY AMBALA CANTT
₹80,000
23 Sept 2022
30 Jul 2022
1 Sept 2022
30 Jul 2022
30 Aug 2022
16 Aug 2022
30 Jul 2022 - 6 Aug 2022
Amount
Dewatering sludgy water from the lagoon of size 65 x 35 x 3.5 mtr deep to near by STP plant by means of diesel engine pump incl PVC/HDPE pipe complete with operator for taking up Non clog sewage submersible motor.
Desilting/cleaning of lagoons of size 65 mtr x 35 mtr x 3.5 mtr deep and taking out sludge in the form of solid containing loose mass containing sewage water manually and removal to a distance n.exc 500 mtr and burried the same under earth in low laying area complete all as specified and directed by Engr-in-Charge.
Taking up & removing unserviceable Dry motor sewage submersible Aerators 20 HP from various lagoons of size 65 x 35 x 3.5 mtr depth by lifting Manually/Crane etc dismantling the same for assesing and deposit to MES store of AGE E/M-II complete all as specified and directed by Engr-in-Charge.
Complete removal of wild grass/vegetation from inside lagoon and surrounding area upto 3 meter from each Sewage lagoon of size 65x 35 x 3.5 mtr and making the surface clear, plain and spraying suitable chemical on the same clean area after removing and depositing the same at a distance not less than 50 mtr away from the site complete all as specified and directed by Engr-in-Charge.
Notes for Ser Item No 1.00 to 4.00:- 1. Contractor shall arrange all equipments/machinary for the above mentioned work at site without any extra cost. 2. Conractor shall make arrangement for reaching upto or inside lagoon and repair the same if any damage occurs during currency of work without any extra cost. 3. Contractor can visit the site before quoting the rate.
Surface dressing n.exc 15 cm deep incl cutting bushes and complete removal of wild grass/ vegetation from surrounding area beyond 3 meter from each Sewage lagoon of size 65x 35 x 3.5 mtr and making the surface clear, plain and spraying roundup chemical on the same clean area after removing and depositing the same at a distance not less than 50 mtr away from the site complete all as specified and directed by Engr-in-Charge. Note:-1. T&P machinary like JCB etc and chemical will be provided by the contractor without any extra cost to Govt. 2. Conractor shall make arrangement for reaching upto or inside lagoon and repair the same if any damage occurs during currency of work without any extra cost. 3. Contractor can visit the site before quoting the rate.
Rough excavation by means of hydraulic excavator exc 1.50 mtr width and not exc 1.50 mtr deep and getting out in soft and loose soil incl removing excavated material to a distance exceeding 500 mtr but n. exceeding 1.5 KM depositing where directed in layers 25 cm thick each watered and well ramming complete all as specified and directed by Engr-in-Charge.
Forming embankments incl raising or lowering the earth spreading in layers n.exc 30 cm thick incl watering ramming / rolling and finishing to required size and shape etc n.exc 1.5 mtr high from the base with all lagoons in areas. Note:-1. T&P machinary like JCB etc and chemical will be provided by the contractor without any extra cost to Govt. 2. Conractor shall make arrangement for reaching upto or inside lagoon and repair the same if any damage occurs during currency of work without any extra cost. 3. Contractor can visit the site before quoting the rate.
Taking up old chocked CI pipe 150 to 300 mm dia spigot and socketed end pipe removing old, worn out nut, botls and cleaning the pipes with bocky, wire brush, cotton waste and refixing the same with new nut & bolts complete all as specified and directed by Engr-in-Charge.
Material & Labour for run lead joint 150 to 300 mm dia CI pipe complete all as specified and directed by Engr-in-Charge.
Material & Labour for preperation of old decorated brick / concrete, plastered or unplastered surfaces of ceiling by brooming down with steel wire brushing, scraping down smoke soot, moulds, moss and effloroscent salts, trading oil and grasy spots etc. and applying two coat of cement base paint on ceiling/wall complete at installations all as specified and directed.
Material and labour Brick work with sub class 'B' bricks straight or curved on plan exc 06 m mean radius in CM (1:6) complete all as specified and directed.
Material and Labour rendering 15mm thick on brick/concrete surface in CM (1:4) finished even and fair complete all as specified and directed by Engineer in charge.
Material & Labour 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregate as in floors finished even and fair complete all as specified and directed by Engr-in-Charge.
Material & Labour PCC (1:4:8) type D2 40 mm graded crushed stone aggregate for foundations,filling and mass concrete complete all as specified and directed by Engr-in-Charge .
Demolition of cement concrete in ground floors and pavings not exc 15 cm thick above all below ground level.
Dismantling of bricks laid flat or on edge in floors etc. complete all as specified and directed by Engr-in-Charge.
Material & Labour Brick work with sub class `B` laid flat old size bricks bedded and jointed in CM 1:6 & pointed flush in CM 1:3 complete all as specified and directed by Engr-in-Charge.
Material & Labour Except Brick sub class `B` laid flat in old size bricks bedded and jointed in CM 1:6 & pointed flush in CM 1:3 complete all as specified and directed by Engr-in-Charge. Note:- Old bricks obtained from Item No 16 shall be re-used after cleaning/working.
Material & Labour for Brick laid on edge in floor bedded and jointed with CM 1:6 and pointed flush in CM 1:3 complete all as specified and directed by Engr-in-Charge.
Material & Labour Except Brick laid on edge in floors bedded & jointed in CM 1:6 and pointed flush in CM 1:3 complete all as specified and directed by Engr-in-Charge. Note:- Old bricks obtained from Item No 16 shall be re-used after cleaning/working.
Material & Labour for Racking out joints/pointing to bricks on edge in boundary of lagoon etc and flush pointing in CM 1:3 complete all as specified and directed by Engr-in-Charge.
Material & Labour for Racking out joints & pointing to bricks on edge in floors etc and flush pointing in CM 1:3 complete all as specified and directed by Engr-in-Charge.
Material and labour for rubber moulded machine pressed precast concrete interlocking paver with grey cement confirming to IS -15658-2000 of 60 mm thickness, M-35 grade as in path, hard standing etc laid over and including 20 mm compacted sand cushioning , including 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate including surface excavation over area n. exc. 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil and remving excavated soil exc 50 mtr but n . exc 250 mtr, at Sewage installations as per requirement including demolition and removing of old material from the site for credit or disposal all as specified and directed by Engineer-in-Charge. Note:- 1. Contractor will arrange all equipments for the above mentioned work at site without any extra payment. 2. Contractor can visit the site before quoting the rate.
Scraping old existing paint from pipes of different sizes including making smooth surface and applying one coat of red oxide primer and two coats of synthetic enamel paint of existing/approved colour complete all as specified and directed by Engr-in-charge.
Excavation in trenches not exc 1.50 metre wide and not exc 1.50 metre deep in soft/ loose soil for laying of pipe line and getting out complete all as specified and directed by Engineer-in-Charge.
Returning filling in, including spreading leveling, watering and well ramming in layers not exc 25 cm all as specified and as directed by Engineer in Charge.
Removal of excavated soil surplus to the requirement to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point.
Taking down existing rusted damaged unserviceable CI/DI pipes of size 200/150 mm complete all as specified and directed.
Supply and laying Ductile iron pipe of 200mm bore, S/S,Class K-9 , including rubber gasket(tyton) joints, nut, bolts & washers ISI marked complete all as specified and directed by Engineer-in-Charge.
Supply and laying Ductile iron pipe of size 200mm bore, flanged end, K-9, ISI marked including rubber gasket for flange joint, nut, bolts and washer etc complete all as specified and directed by Engineer-in-Charge.
Supply and laying Ductile iron pipe of 150 mm bore, S/S,Class K-9 , including rubber gasket(tyton) joints, nut, bolts & washers ISI marked complete all as specified and directed by Engineer-in-Charge.
Supply and fix in replacement cast iron sluice valve PN-1.6 with flanged ends 250 mm nominal bore ISI marked complete with gun metal or stainless steel spindle and cast iron cap including rubber /fiber boared gasket nuts, washers etc complete all as specified and as directed by Engineer-in-Charge.
Description all as per item 32 here in before but 200 mm bore.
Description all as per item 32 here in before but 150 mm bore.
Dismantling wrought iron or mild steel work of any description, rusted, worn out, complete all as specified and directed by Engr-in-Charge.
Material and labour for Mild steel framed work for such as angle/grills, Channel/stand, granting’s etc with ends of bars shouldered and riveted or forged into spikes, frame guard bars barred iron doors, ladders, framed balusters walk ways, railings frame work as per direction and similar work conforming to Fe-290 Gde-E-165 at any installation as per requirement complete all as specified and directed by Engr-in-Charge.
Supply and fix in ductile iron fittings for spigot and socket/flanged pipe such as bends (any type radius and angle) tappers any type (straight, bends, increasing, decreasing or double socket etc) Tee pieces single branch, 'Y' junction, double branch, cross collers, caps and plugs upto 350 mm bore complete all as specified and directed by Engineer-in-Charge.
Material & Labour for brick masonry valve pit of internal size 120cm x 120cm x 120cm with one brick thick wall using sub class ‘B’ brick in cement mortar 1:6 over 20cm thick PCC plate form with 15cm off sets on every side of 1:3:6 type C-1 including plastering of internal surfaces and exposed surfaces with 15mm thick plastering in cement mortar 1:4 and 50mm thick RCC cover in two equal parts 1:2:4 type B-1 with 10mm dia deformed bars at 10cm center to center on both side including necessary form work with 150mm dia hole in the center complete including demollition and removing of old material from the site for credit or disposal all as specified and directed by Engineer-in-Charge.
Note:- Amount of credit of Rs. 230000.00 for retrieved materials is mentioned in Schedule of Credit attached in tender documents in pdf form which will be deducted offline while acceptance of tender.
M/S VINOD RANA CONTRACTOR
M/S Gurpreet Singh
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .