Tender for Renovation of Faculty area at NIFT- Gandhinagar

Civil Work

Dismentling doors, windows ,ventilators etc. (woodor steel)shutters including chowkhats architraves hold fasts and other attachment etc. complete and stacking them with in all lead and lift ii)Exceeding 3Sq.M. in area.

Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles having Tegular edge 15mm Thick Densified edges on the Tile Peri phery for Extra Strength The Light weight calcium silicate ceiling tiles shall have, light reflection 85% non-combustibleasper B.S .476 part IV, 100% humidity resistance and also having the rmal conductivity 0.043° w/ mKC. for the best ther mal Insulation.The Light weight calcium Silicate tile shall be of approved texture Fine fissured /Spintone /Cosmos having NRC value of & Globe having NRC valueof 0.75 NRC or equi valen tof size 595 X 595 mm to be laid on true horizontall evel suspended interlocking metal grid of hot dipped galvanized steel sections galvanizing @120 grams per sqm including both side consisting of main ‘T’ runner suitably spaced at joints to get required length and size of 24 X 38 mm made from 0.30 mm thick(minimum)sheet, 1200 mm centre to centre,and cross ‘T’ of size 24 X 28 mm made out of 0.33mm(Minimum)sheet spaced 1200 mm along spaced bet ween main ‘T’ at 600 mm centre to centre to for magrid of 1200 X 600 mm and secondary cross ’T’ of length 600 mm and size 24 x 28 mm made of 0.30 mm thick (Minimum)sheet to be interlockedat middle of the 1200 X600 mm panel to for mgrid of size 600X600 mm resting on peri phery walls/partitions on aperi meter wall angle pre-coated steel of size (24X24X3000mm made of 0.40 mm thick (minimum)sheet with the help of rawl plugs at 450mm centre to centre with 25mm long dry

Providing and fixing full height partition up to slab level including above the false ceiling height. Partition framework using 50mm x 38mm x 1.5 mm thick extruded aluminium box section (as per IS Standards of Jindal / Hindal / Banco / Windalco make) framework at spacing not exceeding 600mm C/C both ways (horizontal and vertical) framework formed using 50mm x 38mm x 1.5mm thick extruded aluminium box-section connected using 50mm X 50mm X 1.5mm thick "L" angle support cleats fixed with 12mm galvanized metal screws. Partition framework to be secured to the floor, structural support and nearest structural member using galvanized metal screws and wooden dowels. The partition is to be completed with 18 mm thick commercial plywood (IS: 303) grade on both sides with 1.0 mm thick laminate as per design, required holes/face plate for conduit pipes of electrical / networking cables and other services provided is included in the rates. In case wood is used at any place due to constraint, it must be finished with duco colour or polish matching with laminate. All are to be completed as per the architectural drawing. The rate shall include necessary approved hardware items including all materials and labour etc. complete as per the detailed instruction of the engineer-in-charge and consultant.

Providing and fixing flush door both sides laminated and I.T.W. beading all around by using I.T.W. frame 120 m.m. x 80m.m.. shutter fabricated from 35 mm thick solid core malemine faced three layered pre laminated flat pressed wood based exterior grade bonded BWP/BWR synthetic resin having stamped IS 12823 grade I type II including three coats of lacquer polishing to exposed wooden surfaces and Stainless steel decorative type designs fixtures / fastening etc.including I.T.W. triangular batten patti of size 30m.m.x30m.m.etc. as per architectural detailed drawing and as directed by engineer in charge.

Electrical Work: I. Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length , in below type of pipe erected with 6A Modular type switch / bell push & accessories and earth continuity of following type, erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed. (a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete. Cat. III.

II. Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories. [I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board. (a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete. Cat. III.

III. Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate modules erected on / in wall / ceiling with following type accessories. Cat. III.

Supply,fixing, connection and testing of 3 Nos.-5/6 & 15/16 power plug socket along with 1 No.16A & 1 Nos 6A switch with top cover plate, PVC back box with all accessories to complete the job with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete

Supply,fixing, connection and testing of 15/16 A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete.Cat. III

Point wiring for secondary light point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires, in below type of pipe to be erected complete with earth continuity and necessary connection with primary light with accessories erected on Metal / PVC / wooden box covered covered with appropriate front plate modules erected on / in wall / ceiling for open / concealed wiring. with necessary Lamp holder / ceiling rose / H.D.Connector as directed.as per pipe erected with following type of accessories. Note:- Maximum up to 6 mtrs length, excess will be considered as Mains for Secondary Point with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete.

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size With medium class Rigid PVC pipe and accessories. 3 wire 1.5 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size With medium class Rigid PVC pipe and accessories. 3 wire 2.5 sq. mm

Providing and erecting Sheet Steel double door powder coated 8 way MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for three phase incoming and single/three phase horizontal type outgoing Per phase isolation type (PPI)

providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for operation on single phase 240 V,50Hz. having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component. for following Max. rating erected as directed.40Amps. DP . Cat. III

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark. Cat.III

Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity. 40 Amp.

Supply and installing 300 mm wall fan

MAHI KRISHNA CONSTRUCTION

Thar Interiors