Construction of Additional Accommodation to Rest House at Gadagushaini Tehsil Banjar Distt.Kullu HP

Amount

Cutting in earth work in all kinds soil such as pick work, jumper work and blasting work in soft and hard rock, saturated soil and its intermediate classification of soil, chieseling/wedging out of rock (where blasting is prohibited) and pumping or bailing out watering/dewatering upto any lift, clearance of jungle including uprooting of vegetation, grass, bushes, wood trees and scrabbling of grith up to any height and depth, removal of rubbish and unserviceable materials. Any loss to the public and private property during the course of execution shall be the absolute responsibility of the contractor, which shall have to be duly compensated by him in all respect. with in all leads and lift of materials and as per direction of Engineer-in-charge.

Excavation in earth work all kinds of soils and disposal of all excavated earth up to any leads such as pick work, jumper work and blasting work in soft and hard rock, conglomrate rock or saturated soil and its intermediate classification of soil including chieseling/wedging out of rock (where blasting is prohibited) and pumping or bailing out watering/dewatering upto any lift and disposal of all excavated earth up to all leads,lifts and other incidentals and as per directed by Engineer-in-charge.

Excavation in foundation, trenche etc. in earth work in all kinds of soil such as pick work, jumper work, blasting work in soft and hard rock, conglomerated rock or saturated soil and its intermediate classification of soil, chieseling work and wedging out rock (where blasting is prohibited) and pumping or bailing out watering/ dewatering up to any lift, stacking the excavated soil up to any lead from the edge of excavation and then returing the stacked soil in layer when required into plinth, sides of foundation etcetra. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in all leads and lift and carriage of materials in all respect as per direction of Engineer-in-charge.

Providing form work with steel plates 3.15mm. (Three point fifteen milimetre) thick welded with angle iron in frame 30x30x5mm.(thirty into thirty into five milimetre) so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs.(four metre) and removal of the same for insitu-reinforced concrete & plain concrete work in: (i) Foundation, footings basis of columns etc. and mass concrete.including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Columns, pillars, posts and struts Square, rectangular or polygonal in plan.including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Beams, cantilever, girders and lintels. Sides and soffits of beams, beam haunchings, cantilevers,bressumers and lintels not exceeding 1 Mtr. (one metre) in depth in all heights from floor.including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Flat surfaces such as soffits of suspended floors, roofs, landings and the like. Floors etc.upto 200mm. (two hundred milimetre) In thickness.including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Stair cases with sloping or stepped soffits excluding landing.including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Edges of slabs and breaks in floors and walls: under 20 cm. (twenty centimetre) wide.including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Vertical surface such as wall(any thickness) partition and the like including attached pilaster buttresses plinth and string courses and the like.including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and laying cement concrete 1:6:12 (one cement:six sand : twelve graded stone aggregate 40 mm (forty milimetre nominal size) and curing complete excluding cost of centring and shuttering in: Foundation and plinth:including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and laying cement concrete 1:4:8 (one cement: four sand:eight graded stone aggregate 40mm (forty milimetre nominal size) and curing complete excluding cost of form work in:Foundation and plinth :including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and laying reinforced cement concrete design mix M-25 (Twenty Five) grade mechanically mixed and vibrated and curing complete excluding cost of from work and reinforcement for reinforced cement concerete work. The mix shall be designed as per requirement of I.S code and PWD specification. The design mix will be got approved from the Engineer-in-Charge prior to the casting. The theorincal consumption of cement for the item shall be worked out as per approved design mix as per I.S code. (i) Foundation, footing, bases of column and mass concrete. including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Columns pillars, posts and struts upto all floor level. including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Suspended floor roof, land and shelves and their supports balconies, beams, girders, bressumers and cantilever above plinth upto all floor level including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Stair case (except spiral stair case) excluding landing but including preparing of surface and finishing of nosing up to all floor level. Stair-1 and stair-2 including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and laying reinforced cement concrete design mix M-20 (twenty) grade mechanically mixed and vibrated and curing complate excluding cost of form work and reinforcement for reinforcd cement concerete work. The mix shall be designed as per requirement of I.S code and P.W.D specification. The design mix will be got approved from the Engineer-in-Charge prior to the casting. The theoritical consumption of cement for the item shall be worked out as per approved design mix as per I.S code in mouldings as in cornices windows sitlls etc. upto any girth upto all floor level including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and laying reinforced cement concrete design mix M-20 (twenty) grade mechanically mixed and vibrated and curing complate excluding cost of form work and reinforcement for reinforcd cement concerete work. The mix shall be designed as per requirement of I.S code and P.W.D specification. The design mix will be got approved from the Engineer-in-Charge prior to the casting. The theoritical consumption of cement for the item shall be worked out as per approved design mix as per I.S code Suspended floor roof, land and shelves and their supports balconies, beams, girders, bressumers and cantilever upto floor all floor level including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Walls ( any thickness but not less than 0.10 (zero point ten) thickness) including attached pilasters buttersses, plinth and string courses etc. from top of foundation upto all floor levels, including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and laying cement concrete design mix M-25 (Twenty five) grade mechanically mixed and vibrated in reinforced concrete Chajjas not exceeding 10 cm thickness upto floor two level including finishing the exposed surfaces with cement mortar 1:3 (one cement: three sand) to give a smooth and even surface centring./ form and curing complete excluding the cost of reinforcement for reinforced cement concrete work. The mix shall be designed as peer requirement of I.S code and P.W.D specification. The design mix will be got approved from the Engineer-in-Charges prto be casting. The theoritical consumption of cement for the item shall be worked out as per approved design mix as per I.S code upto all floor level including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing mild steel/Tor steel reinforcement for R.C.C. (rainforced cement concrete) work including bending, binding and placing in position complete upto all floor level : Tor Steel including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Brick work using common burnt clay building bricks in super structure above plinth level upto all floor level in second class bricks with cement mortar 1:6 (one cement: six sand) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Half brick masonry Second class in common burnt clay building bricks masonry in super structure above plinth level upto floor two level in cement mortar 1:4 (one cement : four sand) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth including raking out joints in Cement Mortar 1:5 (one cement: five sand) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement :six sand : twelve graded stone aggregate 20mm (twenty milimetre nominal size) at plinth level in Cement Mortar 1:6(one cement:six sand) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Boulder filling dry hand packed under floor, including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Stone filling behind retaining walls/ breast walls including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Filling with brick aggregate in soakpit complete including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing weep holes in brick masonry /stone masonary/ plain reinforced concrete abutment,wing wall,returen wall with of 100 mm (one hundred milimetre) dia PVC pipe extending through the full width of the structure with slope of1( v):20( H) towards drawing face complete as per drawing and technical specifications clause 614,709,1204.3.7 within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.

Providing and fixing factory made PVC white colour slideing glazed door comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60+0.2 m thick galvanized mild steel section made from roll forming process of required length (shape and size according to u PVC profile) appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded inline sash adaptor (if required) EPDM gasket, wool pile, zinc alloy (white poweder coated) handle with key on one side of extreme panels along with zince plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white power coated) cresent lock (if required) stainless steel (SS 304 grade) body with adjustable double nylon rollers *weight bearing capacity to be 120 kg), G.I fasteners 100x8m size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame and sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing and direction of Engineer-in-charge. (single/double glass panes, wire mesh silicon sealent shall be paid separately.) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing suppling & fixing of glazed 3 Track -2 Panel sliding Window with mesh made out of mulit chambered uPVC sections with TPV gaskets having isolated drainage and reinforced with GI throughout the window. The sliding outer frame having a overall size of 94 x 45 mm (ninety four into forty eight milimetre) with reinforcement of 1 mm (one milimetre) thickness, sash with overall size of 39 x 58 mm (thirty nine into fifty eight milimetre) with reinforcement of 1.5 mm (one point five milimetre) thickness, mesh sash of overall size 25 x42 mm (twenty five into forty two milimetre) reinforced with 1.5 mm (one point five milimetre) of G.I glazing bead for fixing of glass shall be of size 20 x18 mm (twenty into eighteen milimetre) and coextruded with gasket. Composition of profile shall consists a minimum of 6 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin. Fiber Glass mesh shall be provided in mesh shutter. Windows shall be provided with 5 mm (five milimetre) plain float glass, standard hardware and single point locking system of flush lock. Wall thickness of frame & sash shall be 2-2.2 mm. including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing, supplying & fixing of Top hung Ventilator with Exhaust Fan Provision made uPVC sections with TPV gaskets have isolated drainage and reinforced with Galvanized iron of 120 GSM profiles through out the window. The outer frame haveing a overall size of 60 x 55 mm (sixty into fifty five milimetre) with reinforcement of 1 mm (one milimetre) thickness, Mullion with overall size of 74 x 60 mm (seventy four into sixty milimetre) with reinforcement of 1 mm (one milimetre) thickness and sash with overall size of 75 x 60 mm (seventy five into sixty milimetre) with reinforcement of 1.5 mm (one point five milimetre) thickness, Glazing bead for fixing of glass shall be of size 34 x 20 mm (thirty four into twenty milimetre) coextruded with gasket. Composition of oprofile shall consists an minimum of 6 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin.ventilator shall be provided with 4.5 mm (four point five milimetre) Pin Head glass, standard hardware, single point locking and friction stays. Wall thickness of frame, mullion and sash be 2.2 -2.4 mm. (two point two -two point four milimetre)including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing wood work in frames of doors,windows,clerestory,windows and other frames wrought,framed and fixed in position.2nd class deodar wood.including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing flush door shutters interior grade, commercial type, core of black-board construction with frame of first class hard wood and well matched commercial ply veneering with vertical grains of cross bands and face veneers on both faces of shutters.35 mm (thirty five milimetre) thick including black enamelled M.S. butt hinges. including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing 19mm (nineteen milimetre) thick Commercial Board water proof shutters for up boards i/c fixing with nickel plated piano hinges with screws etc complete) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing 19mm (nineteen milimetre) thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing commercial ply wood ceiling of approved quality with butt jointing and nails (frame work and cover fillets to be paid for separately) 6 mm (six milimetre) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing 1.00mm (one milimetre) thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc complete.including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing square edges cover fillets (beading) 19mmx6mm (nineteen milimetre into six milimetre) section i/c mitring at junctions with wood screws and nails complete. 1st class deodar wood including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing 40 mm (forty milimetre) thick plain framed panelling with necessary screws priming coat on unexposed surface etc. complete with 2nd class deodar wood. including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing bright finished brass handles with screws etc. complete.100 mm (one hundred milimetre) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing magnetic catcher with screws etc including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Provindg and fixing anodized aluminium sliding door bolts anodized colour and shade with bolts and nuts screw etc. complete. 300x16mm (three hundred into sixteen milimetre) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing aluminium tower bolts (berrel type) anodized transparent or dyed to required shade and colour with screws etc complete. (a) 250 x 10 mm (two hundred fifty into ten milimetre) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

150 x 10 mm (one hundred into ten milimetre) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing aluminium handles anodized transpoarent or dyed to required colour of shade with necessary screws etc. complete. (a) 125 mm (one hundred twenty five milimetre) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

100 mm (one hundred milimetre) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing 100mm (one hundred milimetre) bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing bright finished hard drawn hooks and eyes 150 mm (one hundred fifty milimetre) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing finishing bright finished or/ and black enamelled iron (Hydraulic door closer) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and laying antiskid vetrified tiles Nitco or equivalant 450x 450x15mm (four hundred fifty into four hundred fifty into fifteen milimetre) coloured or approved shade in flooring, treads of steps and landings laid on a bed of 12mm (twelve milimetre) thick cement mortar 1:3 (one cement : three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of shade to matchincluding rubbing and polishing complete.including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing 10mm thick full body vetrified tiles t of size 600x 600 (six hundred into six hundred milimetre) of desert series in approved shade and colour in flooring, treads of steps and landings laid over 12mm (twelve milimetre) thick cement mortar 1:3 (one cement : three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete upto all foor level,.including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and laying spartic ceremic tiles 5.5mm. (five point five milimetre) thick in flooring (300 x300mm. size) (three hundred into three milimetre) treads of steps laid on a bed of 12mm. thick cement mortar 1:3 (1cement: 3 sand) finished with flush pointing in white cement upto all floor level, including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and laying full body vetrified anti skid tiles (300x 1200mm x 100mm) (three hundred into twleve milimetre into one hundred milimetre) grey/coloured or of approved shade in stair case treads of steps, risers and landing laid on a bed of 12 mm (twelve milimetre) thick cement mortar 1:3 (one hundred : three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required to match the shade of tiles i/c rubbing and polishing complee. including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and laying 8 mm (eight milimetre) thick HDF laminated wooden flooring laid on a 3 mm (three milimetre) thick Profile including planning and leveling. including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and laying granite stone in flooring 20mm (twenty milimetre) (average)thickness base of cement mortar 1:3(one cement: three sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete. 20mm. (twenty milimetre) thick including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and laying colour glazed digital ceramic tiles 300x 600 (three hundred into six hundred) tiles on wal skirtting in room laid on 12 mm (twelve milimetre) thick cement mortar 1:3 (one cement: three sand) finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles. up to all floor level. including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

15mm (fifteen milimetre) cement plaster in single coat on the rough side of brick/concrete/ stone walls for interior plastering upto all floor level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm (eighty milimetre) in girth and finished even and smooth. Cement mortar 1:6 (one cement: six sand). up to all floor level.. including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

15mm (fifteen milimetre) cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto all floor level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm (eighty milimetre) in girth and finished even and smooth. Cement mortar 1:6 (one cement: six sand). up to all floor level including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

15mm (fifteen milimetre) cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto all floor level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm (eighty milimetre) in girth and finished even and smooth. Cement mortar 1:4 (one cement: four sand). a) Ground floor to floor two level. including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

6mm (six milimetre) Cement plaster to ceiling (a) In Cement mortar 1:3 (one Cement:three Sand) up to all floor level. including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing in RCC work smooth finishing of exposed surface with cement mortor 1:3 (one cement : three sand) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixng 12mm (twelve milimetre) thick Glass Reinforced concrete cladding of approved shape and texture of unistone or its equivalent made from portland cement alkally resistance glass fibres, UV resistant synthetic inoranganic pigment combined with the range of chemical additives on exterior surface side as on faces of Arch masonry walls etc. 12mm (twelve milimetre) thick cement plaster 1:3 (one cement : three sand) and jointed with cement slurry i/c scaffolding etc. complete. including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing 0.60mm (zero point sixty centimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating to back coat of polyster of 5 (five) microns over 5 (five) microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge.including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing M.S. BP Sheet 1.66mm to 2mm (one point sixty six milimetre to two milimetre) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing 15 cm (fifteen centimetre) .wide 45 cm. (forty five centimetre) overall semicircular plain G.I. sheetgutter with iron brackets 40x3mm (forty x three milimetre) size bolts and nuts and washers etc. including making necessary conections with rain water pipe complete as per design. 0.80mm(zero point eighty milimetre) thick sheet.including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing partical board ceiling of approved quality with butt jointing and nail (frame work and cover fillets to be paid for separately ) Cement bonded particle board. 6 mm (six milimetre) thick.including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing DEXUNE/Hunter Duglas/Saint Gobain false ceiling of approved materials of size 595x595 mm (five hundred ninety five into five hundred ninety five milimetre) in true horizontal level. suspended on inter locking metal grid of hot dipped glavanised steel sections (galvanized @120 grams/sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm (twenty four into thirty eight milimetre made from 0.38 (zero point thirty eight militre) thick sheet, spaced at 12mm (twelve milimetre) center to centre and cross "T" of size 24x25mm (Twenty four into twenty five milimetre) made of 0.30 mm (zero point thirty milimetre) thick (minimum) sheet, 12mm (twelve milimetre) long spaced between main "T" at 600mm (six hundred milimetre) centre to centre to form at grid of 1200x600 (twelve hundred into six hundred) and secondary cross "T" of length 600 mm (six milimetre) size 24x25 mm (twenty four into twenty five milimetre) made of 0.30 mm (zero point thirty milimetre) (minimum ) sheet to be interlocked at middle of the 1200x600 mm (twelve hundred into six hundred milimetre) and wall angle of size 24x24x0.3 mm (twenty four into twenty four into zero point three milimetre) and laying false ceiling tiles of approved texture in the grid including, required cutting/making opening for services like diffusers, girlls, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended ffrom ceiling using GIO slotted cleats of size 27x237x25x1.6 m (twenty seven into thirty seven into twenty five into one point six milimetre) fixed to ceilling with 12.5 mm (Twelve point five milimetre) dia and 50 mm (fifty milimetre) long dash fasteners, 4mm (forty milimetre) GI adjustable roads with galvanised butterfly level clips of size 85x 30x0.8mm (eight five into thirty into zero point eight milimetre) spaced at 12mm (twelve milimetre) centre to centre along main "T" bottom exposed width of 24 mm (twenty four milimetre) of all T-sections shall be be pre-painted with polyester pain, all complete for all heights as per specifications, drawings and as diected by Engineer-in-Charges GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm (five hundred ninety five into five hundred ninety five milimetre) and 0.5 mm (zero point five milimetre) thick with 8 mm (eight milimetre) drop made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm (one point eight milimetre dia holes and having NRC (Noise Reduction Coefficient) of 0.5 mm (zero point five milimetre) electro stalically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Galss fiber acoustical fleece.

Providing and fixing ridges or hips 60 cm (sixty centimetre) overall with 0.60mm (zero point sixty milimetre) thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (twenty) microns over 5 (five) microns primer coating + back coat of polyster of 5 (five) microns over 5 (five) microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges.including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing valley 90 cm (ninety centimetre) overall 0.60mm (zero point sixty) thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 (five) microns over 5 (five) microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-charge including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing flushing 38cm (thirty eight centimetre) overall with 0.60mm (zero point sixty milimetre) thick prepainted sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 (twenty) microns over 5 (five) microns primer coating + back coat of polyster of 5 (five) microns over 5 (five) microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia meter & prepainted G.I. limpet & bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge. including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint. (a) In beams joists channels ,angles , tee ,flats with connecting platesor angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like. including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing 75 mm x 60mm (seventy five milimetre into sixty milimetre) rounded hand rails in straight length complete in. 1st class indian teak wood.including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 (four point five) kg/sqm including filling the joints with approved adhesive complete. 100mm (one hundred milimetre) dia pipes including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete (i) Plain bend 100 mm (one hundred milimetre) dia. including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Plain Shoe 100 mm (one hundred milimetre) dia, including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

PVC Clamp 100 mm (one hundred milimetre) dia, including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Polishing two coats with french polish on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust, and sand papared smooth and including a coat of wood filler. including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete. including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Wall painting (two coats ) with plastic emulsion paint of approved brand and manufacture on undecorated wall surface to give an even shade including throughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth inluding applying of putty as required for making the surface. including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter) sand papering and knotting.Readymixed paint brushing wood primer pink. including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering and stoping with enamel paint other than white. including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing 45/30cm (forty five/thirty centimetre) wide screen made of MS hollow Sqarue sections of 50x50mm (fifty into fifty milimere) size 3mm (three milimetre) thickness for main frame and M.S hollow square section for distribution members 19mm x 19mm (nineteen milimetre into nineteen milimetre) size 3 mm (three milimetre) thick placed at equal distance between centre to centre duly welded with the main frame and decorative screen cente piece 23cm x45cm (twenty three centimetre into forty five centimetre) made to shape out of 20x3mm (twenty into three milimetre) M.S flat frame covered with black sheet duly welded with main frame of the screen. The screen should be embedded or fixed in RCC pillars and botton of beam by mechanically means including priming coat of steel perimer as per drawing/design and instruction of Engineer-in-Charges. including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing M.S grills of required pattern in window frames etc. with M.S flat square or road bars with round handed bolts and nuts complete ornamantal grills for railing. including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Constructing Course rubble hammer dressed 'U' shape open surface drain with side wall. 15x22 cm (fifteen into twenty two centimetre) in cement mortar 1:6 (one Cement : six Sand) and inside plastring with cement plaster 1:3 (one Cement:three Sand) including earth work and laying 10 cm (ten centimetre) cement concrete in 1:5:10 (one Cement : five Sand : ten graded stone aggregate) of 40 mm (forty milimetre) nominal size and 7.5 cm (seventy point five centimetre) cement concrete 1:2:4 (one Cement : two Sand : four Graded stone aggregate of 20 mm (twenty milimetre nominal size) and finished with a floating coat of neat cement complete as per standard design. including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing under layer for plinth protection of 75mm (seventy five milimetre) (unconsolidated) bed dry brick/stone aggregated 40 mm nominal size with rammed and consolidated and grouted with fine sand including preparation of ground. including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing plinth protection 50 mm (fifty milimetre) thick cement concrete 1:3:6 (one cement; three sand: six graded stone aggreaged 20 mm (twenty milimetre) nominal size. including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing to wall ceiling and floor galavanized mild steel tubes (medium grade) tube fitting and clamps including making good the wall ceiling and floor 15mm (fifteen milimetre) nominal bore, including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

20mm (twenty milimetre) nominal bore, including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing Plytheline-Aluminium-Polyethylene (PE-Al-PE) Composite pressure pipe U.V stablilized with carbon black confirming to IS-15450-2004 water supply including clamp at one metre spacing, cutting, fixing and making good the wall etc. but excluding the cost of fitting (internal work) pipes exposed on wall. internal work-exposed on wall. 1620 (20mm (twenty milimetre) OD Pipe) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fitting complete including cutting and making good the walls etc. Equal tee 1620 (one thousand six hundred twenty) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Female branch TEE. 1620x1620 x20 mm (one thousand six hundred twenty into one thousand six hundred twnety into twenty milimetre) thread. including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Female elbows:- 1620x20 mm thread. (one thousand six hundred twenty into twenty milimetre)including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Male thread connector 1620x20 thread. (one thousand six hundred twenty into twenty milimetre) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Female thread connector 1620x20 thread. (one thousand six hundred twenty into twenty milimetre) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Couplers: 1620 (one thousand six hundred twenty into twenty) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Making connection of galvanised steel distribution branch with galvanised mild steel main 20mm (twenty milimetre) to 40mm (forty milimetre) nominal bore by providing and fixing tee including cutting and threading the pipes complete including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing PVC water storage tank of ISI : 12701 marked, G.I inlet and outlet connection, 15 mm (fifteen milimetre) nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level, 1000 (one thousand) litres net capacity tank , including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing vitreous China wash down,water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(1 cement : 1 sand) (Seat and over to be measured and paid for separately):- Ordinary closet, including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing wall Mounted W.C. (Jaguar make Cat no-LYS-WHT-38951 with citern, seat cover, including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing plastic seat (Solid / Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers solid type white plastic seat and cover, including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing vitreous China wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings (Jaguar make table top Cat no-OPS-WHT-15901N), including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing vitreous China wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings flat back 550mmx400mm (five hundred fifty milimetre into four hundred milimetre), including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing vitreous China padedstal for wash basin complete recessed at the back for the reception of pipes and fittings, including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete 110mm (one hundred ten milimetre) dia, including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

75mm (seventy five milimetre) dia, including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complet 110mm (one hundred ten milimetre) dia, including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

75mm (seventy five milimetre) dia, including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete.110mm (one hundred ten milimetre) dia, including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

75mm (seventy five milimetre) dia, including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing PVC collers ISI marked including fixing with approved adhesive etc. complete. 110mm (one hundred ten milimetre) dia, including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

75mm (seventy five milimetre) dia, including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete. 110mm (one hundred ten milimetre) dia, including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

75mm (seventy five milimetre) dia, including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete 110 mm X 75 mm. (one hundred ten milimetre into seventy five milimetre), including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing PTMT Coloured / white high density polythelene / poly propylene 10 litres capacity ( full flush) European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm nominal size PVC ball valve with polythene float,with push button,couplings for connections with inlet, outlet and ovr flow pipe, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately), including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing stainless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fitting.610 x 510 mm (six hundred ten into five hundred ten milimetre) with boul depth 200 mm (two hundred milimetre), including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing C.P. Brass waste for wash basin or sink 32mm (thirty two milimetre) dia, including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing 600mm x 450 mm (six hundred milimetre into four hundred fifty milimetre) bevelled edge miror of superior glass mounted on 6mm thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers. including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing C.P. Brass Towell rail coplete with C.P. Brass brackets fixed to wooden pluges with C.P. Brass screws 600mm x 20mm (six hundred milimetre into twenty milimetre) , including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing 600mm x 120 mm (six hundred milimetre into one hundred twenty milimetre) glass shelf with C.P. Brass bracket and guard rail complete, fixed to wooden pluges with C.P. Brass screws. including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing wall mixing faucet for shower and bath with overhead pipe (1210cm)(one thousand two hundred ten centimetre) and bath shower including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing one hole basin mixing Faucet.including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing 15mm (fifteen milimetre) mixer for kitchen sink with top / bottom swinging spout.including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing 15mm (fifteen milimetre) dia C.P Brass bib tap (long body) with Capstan head and flanges including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing C.P. brass angle valve with flanges15mm (fifteen milimetre) without Nuts and pipe. including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing 15mm (fifteen milimetre) nominal bore brass full way valve with wheel including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing PVC waste pipe 32mm (thirty two milimetre) dia, including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing PTMT jet spray of approved quality and colour with one metre tube., including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing P.V.C connection with brass unions 15mm (fifteen milimetre) nominal bore including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixingC.P. gratings 100mm (one hundred milimetre) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing charomium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing 15mm (fifteen milimetre) nominal size G.I./M.I Union of following sizes (where not included in the items) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Supplying cast iron cover without frame for manholes: (i) for frame of internal dimension 455mm x610 mm (four hundred fifty five milimetre into six hundred ten milimetre) rectangular C.I cover (light dty single seal pattern-1) the weight of cover to be not less than 23 (twenty three) kg. including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing andlaying in trenches 10 Kg /T/Cm2 work pressure un-plasterized P.V.C. pipes (conforming to I.S. complete with fitting (earth work in trenches to be measured and paid for separately with out side diametre)including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Naresh Kumar

ATUL SHARMA