Tender For PROPOSED MUESUM AND WAITING LOUNGE AT MALL ROAD MUSSOORIE

(CIVIL WORK) PART -A Earth work in excavaöon by mechanical means (Hydraulic Excavat in foundation trenches or drains (not exceeding 1.5 m in width or 1 including dressing of sides and ramming of bottoms, lit upto 1.5 out the excavated soil and disposal of surplus excavated soil as dir of 50 m. All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering. All work upto plinth level. 1 :4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

Supplying and filling in plinth witn Jamuna sand under floors including, watering, ramming consolidating and dressing complete.

Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor with Chlorpyiphos/ Lindane E.C. 20% with 1%.

Brick work witl F.P.S. bricks of class designation 75 in foundation and plinth in Cement mortar 1 :6 ( 1 cement : 6 coarse sand)

Brick work witl F.P.S. bricks of class designaton 75 in superstructure above plinth level upto floor 2 level in all shape and sizes in Cement mortar 1 :6 (1 cement : 6 coarse sand)

Half brick masonry with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in cement mortar 1 :4 (1 cement : 4 coarse sand)

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, inctucotg pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and , including admixtures in recommended proportions as per IS: 9103 to accelerate, retard semg of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately) . All works upto plinth level

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durabiliY as per direction of Engineer-incharge. (Note :- Cement content considered in this item S @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately). All works above plinth level

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. ThermoMechanically Treated bars.

Centring and shuttering including strutting, ropping etc. and removal of form for Lintels beams, plint beams, girders, bressumers and cantilevers.

Centing and shuttering including strumg, ropping etc. and removal of form for Centing and Shutering for Suspended floors, roofs, landings, balconies and access plafform.

Centing and shuttering including etc. and removal of form for Columns, Pillars, Piers, Abutments, Poso and Stuo.

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm bickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel ange of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm hick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pretreatment of the surface.Fixing with adjustable lugs with split end tail to each jamb.

Providing and fixing pressed steel door frames confirming to IS: 43 from commercial mild steel sheet of 1.25 mm bickness including h jamb, bead and if required angle threshold of mild steel angle of se or base ties of 1.25mm pressed mild steel welded or rigidly fixed t mechanical means, adjustable lugs with split end tail to each jamb butt hinges 2.5mm thick with mortar guards, lock strike-plate and as specified and applying a coat of approved steel primer after pre surface as directed by Engineer-in-charge. Profile B

Steel work welded in built up section/framed work including cutting in position and applying a priming coat of approved steel primer us required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Providing and laying cement concrete in retaining walls, reborn walls (any thickness) including attached pilasters, columns, piers, abutmets, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping bed blocks, anchor blocks, plain window sills, fillets etc upto floor five level, excluding the cost of centring, shuttering and finishing in 12:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

15 mm cement plaster of mix in 1:6 (1 cement: 6 fine sand)

12 mm cement plaster of mix in 1 :6 (1 cement: 6 fine sand)

6 mm cement plaster of mix in 1 :3 (1 cement 3 fine sand)

Providing and laying integral cement based water proofing treat including preparation of surface as required for treatment of balconies, terraces etc consisting of folowing operations : a) Appl a slurry coat of neat cement using 2.75 kg/sqm. of cement ad witl water proofing compound conforming to IS. 2645 and appro by Engineer-in-charge over the RCC slab including adjoining upto 300mm height including cleaning the surface before treatm b) Laying brick bats with mortar using broken bricks/brick bats 25 to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 sand) admixed with water proofing compound conforming to IS : 2 and approved by Engineer-in-charge over 20 mm hick layer cement mortar of mix 1 :5 (1 cement :5 coarse sand ) admi water proofing compound conforming to IS 2645 and appro Engineer-in-charge to required slope and beating similarly th walls and slabs c) After tv,'0 days of proper curing applying a sec coat of cement slurry using 2.75kg/ sqm of cement admixed water proofing compound conforming to IS 2645 and appro Engineer-in-charge. d) Finishing the surface with 20 mm thic jointiess cement mortar of mix 1:4 (1 cement :4 coarse san admixed with water proofing compound conforming to IS : 264 approved by Engineer-in-charge including laying glass fibre cl approved quality in top layer of plaster and finally finishing the surf wit) towel with neat cement slurry and making patern of mm square 3mm deep. e) The whole terrace so finished sha flooded with water for minimum period of time .

Providing and applying plaster of paris putty of 2 mm thickn plastered surface to prepare the surface even and smooth complet

Providing gola 75x75 mm in cement concrete 1 :2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing 'With cement mortar 1 :3 (1 cement : 3 fine sand) as per standard design. In 75x75 mm deep chase.

Providing and laying Vitrified tiles in different sizes (frickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesve (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile1000x1000 mm

Providing and laying Polished Granite stone flooring in required design and pattems, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm bick stone slab over 20 mm (average) bick base of cement mortar 1 :4 (1 cement : 4 coarse sand) laid and jointed witn cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer- in-Charge.PoIished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade : 13.66.1 Two ormore coats on new work

Kota stone slabs 20 mm thick in risers of steps, skirtng, dado and pillars laid on 12 mm (average) thick cement mortar 1 :3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of be slabs, including rubbing and polishing complete.

Providing and fixing 1st quality ceramic glazed wall tiles conf IS : 15622 (thickness to be specified by the manufacture ) of appr make in all colours, shades except burgundy , botle green, black of size as approved by Engineer-in-Charge in skirting, risers of ste dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 c sand) and jointing with grey cement slurry @ 3.3kg per sqm pointing in white cement mixed with pigment of matching sh complete.

Providing and fling ISI marked flush door shuters conforming to IS : 2202 (Part 1) nondecoratve Wpe, core of block board construction wit frame o wood and well matched commercial 3 ply veneering with verical g bands and face veneers on both faces of shuters. 35 mm thick including ISI marked Stainless Steel butt hinges with necess- ary screws.

Providing and laying rectified Glazed Ceramic floor files of size 3001300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in al colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1 :4 (1 Cement : 4 Coarse sand), joining Wii grey cement slurry @ 3.3 kg/ sqm including pointng the joints with mite cement and matching pigments etc., complete.

Providing and fDöng aluminium sliding door bots ISI marked anodi coating not less ban grade AC 10 as per IS : 1868) transparent or colour or shade with nuts and screws etc. complete. 300x16 mm

Providing and fixing aluminium handles ISI marked anodised (anod less than grade AC 10 as per IS : 1868) transparent or dyed to req Slade with necessary screws etc. complete 125mm

Providing and fixing aluminium tower bolts ISI marked anodised (a not less than grade AC 10 as per IS : 1868 ) transparent or dyed or shade witl necessary screws etc. complete. 250x10 mm

Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Single rubber stopper

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade

Finishing walls with textured exterior paint of required shade. New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @2.20kg/10 sqm.

Painting wood work with Deluxe Mull Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture

Providing & fixing glass panels with putty and glazing clips in steel doors, windows, clerestory windows alll complete. With 4.0 mm bick glass panes.

Windows using galvanised M.S. vire gauge 'Hith average width of a in both directions with wire of dia. 0.63 mm. With 12 mm mild steel U beading.

(CIVIL WORK) PART -B Earth work in excavation by mechanical means (Hydraulic Excavat in foundation trenches or drains (not exceeding 1.5 m in width or 1 including dressing of sides and ramming of bottoms, lift upto 1.5 out the excavated soil and disposal of surplus excavated soil as dir of 50 m. All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering. All work upto plinth level. 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mmnominal size).

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. (Note :- Cement content considered in this item is @ 330 kg/ cum. Excess/ less cement used as per design mix is payable/recoverable separately). All works upto plinth level

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, Improve workability without impairing strength and durability as per direction of Engineer-incharge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately). All works above plinth level

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars.

Centring and shuttering including strutting,ropping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Centring and shuttenng including strutting,ropping etc. and removal of form for Centring and Shuttering for Suspended floors, roofs, landings, balconies and access platform.

Centring and shuttering including strutting,ropping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes.

(ELECTRIC WORK) WGPVCPT Point wiring in PVC conduit, with piano type switch: wiring for light point / fan point /Ex Fan Point/ Call Bell Point recessed PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the pont with 1.5 sq. mm FR PVC insulated copper conductor single core cable etc. as required. Group C

LPACCPT S / F light plug point piano type accessories: Supplying and fixing metal box of 150 mm x 75 mm x 60 mm deep(nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 anos socket outlet and 5/6 amps piano type switch, connection, painting etc. as required.( For light plugs to be used in non residential buildings).

WGSTLPTTC Twin control Point wiring in PVC conduit, with piano type switch: wiring for twin control light point recessed suitable size M.S. box and earthing the point with 1.5 sq. mm FR PVC insulated copper conductor single core cable etc. as required.

PPACCPT S/F power plug point piano type accessories: Supplying and fixing matel box of 180 mm x 100 mm x 60 mm deep on urface or in recess with 15 Amps piano type switch and socket.Complete with all work

MCBDPSOC20 SF 20A SPN MCB industrial socket outlet : Supplying and fixing 20amps, 240 volts, SPN industrial type, socket outlet, with 2 pole

WGPVCSB Circuit/sub-man wiring in PVC conduit: Writing for circuit/ submain wiring along with earth wire with the following size of PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as reqit. 2 x 1.5 sq. mm + 1 x 1.5 sq mm earth wire.

WGPVCSB Circuit/sub-man wiring in PVC conduit: Wiring for circuit/submain wiring along with earth wire with the following size of PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. 2 x 2.5 sq. mm + 1 x 2.5 sq mm earth wire.

WGPVCSB Circuit/sub-man wiring in PVC conduit: Wiring for circuit/ submain wiring along with earth wire with the following size of PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. 4 x 2.5 sq. mm + 2 x 2.5 sq mm earth wire.

CREB S 1 F Ceiling rose : Supplying and fixing 3 pin 5amp ceiling rose including connection etc. as required.

Supplying and fixing PVC batten/ angle holder including connections etc. as required.

EARGIPL Gl earth plate electrode:Earthing with Gl earth plate 600x600x6 mm thick i/c accessories and providing masonary encloser with cover plate having locking arrengement and watering pipe etc complete work

EARGIWRPIP PF of 6 SWG Gl earth wire in pipe Providing and laying earth connection from earth electrode with 6 SWG Gl wire in 15 mm dia Gl pipe complete work

TPMCBDB SF TP MCB DB:4 way (4'+12), Double door, hotizontal type

MCBC SF C series SP MCB SF 5 amo 32 amp rating,240V C series MCB on existing DB complete with connections

MCBTPIS SIF TP MCB isolator : SF 100 amp rating ,415V isolator on existing DB complete with connections.

SIF of hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16S.W.G. M.S. sheet incorporating 10mm dia. M.S. bar round and duly painted with red oxide along with all work

Eraction testing of Exhaust fan complete with all work

Eraction testing of ceiling fan etc excluding supply of down rod complete in all respect

Supply of 7w LED Bulb for mounting on Brass Holder. (havells catc. Ref.LHLDEUEEMC8R007 or equivalent)

Supply of E-Lite 20W LED Pride Plus Neo batten. A Color changing LED batten with options of 3000 K & 6500 K, all in one fixture. (havells catc. ref. LHEXACP71NIW020 or equivalent)

Supply of Metallic range exhaust fan, 300 mm sweep. (havells catc. ref. Ventil Air- DSP or equivalent)

Supply of 1200 mm sweep , 5 star rated ceiling fan. (Havells catc. ref. ES NEO or equivalent)

Supplying of Recess/Conceal Fazer Neo LED Panel Square with Ultra slim LED panels with inbuilt driver in PC body. Premium aesthetics with stepped ring bezel with integrated driver (6 W LED 6000K). (Firefly catc. Ref. LHEBMDP61WIW006 or equivalent)

Supplying of Recess/ Conceal Fazer Neo LED Panel Square with Ultra slim LED panels with inbuilt driver in PC body. Premium aesthetics with stepped ring bezel with integrated driver (20 W LED, 6000k) (Firefly catc. Ref.LHEBMDP71WIW020 or equivalent)

(SANITARY WORK) Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ting conforming to :5382 leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 100 mm diameter

Provoding and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to :5382 leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter

Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I, rain water pipes embedded in and including cement concrete blocksembedded in and including cement concrete blocks 10x10x 10cm of 1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. 100 mm diameter.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.l clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required. One urinal basin with 5 litre white P.V.C, automatic flushing cistern

Providing and fixing white vitreous china pedestal type water closet (European 6ype W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistem with manually controlled device (handle lever), conformin to IS : 7231 with all fittings

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32. White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing completely recessed at the back for the reception of pipes and fitting.

Providing and fixing G.I. pipes complete with G.I. firrings andd clamps, including cutting and making good the walls etc. internal work - Exposed on wall 15 mm dia. Nominal bore.

Providing and fixing G.I popes complete with G.i> fittings and clamps, including cuttung and making good the walls etc. internal work - Exposed on wall 15mm dia. Nominal bore

Providing and fixing G.I. pipes complete with G.I. fitting inckuding trenching and refilling etc. (external work) 20mm dia. Nominal bore

Making connection of G.I. distribution branch with G.I main of following size by providing and fixing tee including cutting and threading the pipe etc complete. 20 mm nominal bore

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931. 15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser approvd quality conforming to' IS : 8931.15 mm nominal bore

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls

Providing and placing on terrace (at all floor levels) polyethylene water tank ISI 12701 marked with cover and suitable locking arrangement in tank. and necessary holes for inlet, outlet and overflow pipes but without fitting base support for tank.

Providing and fixing PTMT soap Dish Holder having length of 138m 102mm, height of 75mm with concealed fitting arrangements weig than 106 gms.

Providing and fixing 600)(450 mm bevelled edge mirror of superior quality) complete with 6 mm thick hard board ground fixed to woo C.P. brass screws and washers complete.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden. 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less then 190gms.

Providing and fixing uplasticised PVC connection pipe with brass unions. 45 cm length. 15 mm nominal bore.

Providing and fixing PTMT grating of approved quality and colour.Circular type. 100 mm nominal dia.

Providing and fixing ball valve (brass) of approved quality complete. High or low pressure with plastic floats. 15 mm nominal bore

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse Inside size 60x45x50 cm. inside including C.I. cover with frame (light duty) 455x610 mm intemal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg): With F.P.S. bricks with class designation 75

Mukesh Bangwal

Harsh Mani Dobhal