Electrification of Kayamkulam (Valiyazhikal) Lighthouse under Cochin Directorate

Amount

Annexure-I :Electrification of Power House and Office at Kayamkulam (Valiyazhikal) Lighthouse

MODULAR SWITCH BOXES, SWITCHES AND SOCKETS

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

2/3 Module (100mm * 75mm)

4 Module (125mm * 75mm)

6 Module (200mm * 75mm)

8 Module (125mm * 125mm)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

2 way 5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Telephone socket outlet

TV antenna socket outlet

Supplying and fixing PVC batten/ angle holder including connections etc. as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

Upto 450 mm sweep (450mm -1No for Powerhouse and 300mm - 3Nos.for Toitet)

CONDUIT AND CABLE

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

3 x 1.5 sq. mm

3 x 2.5 sq. mm

3 x 4 sq. Mm

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

SWITCH GEAR

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.(Quarters)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

6A - 4Nos, 10A - 4Nos, 16A - 4Nos. Single pole

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Supplying and fixing following rating, double pole, 240 V, isolator in the commissioning etc. as required. existing MCB DB complete with connections, testing and Commissioning

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted\ including earthing etc. as required. (But without MCB/RCCB/Isolator)

16 way, Single/Double door

Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Indoor Industrial Tube Light Battens, with LED Tube ( inclusive), Philips make LED Batten with Essential 4' 20W LED Tube or Havells/ Luker make

Bulk Head Luminaries IP65/66/67 IK09/10 LED Light source (inclusive) with integrated LED source ( Philips or Havells or Luker make )

Angle Batten Lamp Holder, LED light source (inclusive), Philips make with Philips 10.5/12W no dimmable Master LED Glass Bulb or Havells or Luker make

Ceiling Fan, Electro-phoretic lacquered/Electroplated surface for anti-rusting, High speed fan with wider tip blade for effective air circulation with Sweep 1200mm and Hight performance even at low voltage, Havelle or Cromption or Usha make

Ceiling Fan, Electro-phoretic lacquered/Electroplated surface for anti-rusting, High speed fan with wider tip blade for effective air circulation with Sweep 600mm and Hight performance even at low voltage, Havelle or Cromption or Usha make

Wall Mounting Luminaries, Philips make QWG 303/Divine/Delight/Tribal with 7W Full Glass LED lamp B22/E27 ( Non Dimmable) Philips/Luker/Havells Make

RO Water filter ( UV, UF, TDS and min 7 litres storage)

Wall Mounting Luminaries, Philips make LED Mirror Fitting with LED Lamp ( Non Dimmable) Philips/Luker/Havells Make

Bare Copper wire, 10 SWG for powerhouse

Earthing Back Fill Compound (25kg - 1 Bag)

Miscellaneous items for the purchase of screws, Bolts, Nuts & Washers, drill bits, cable ties, bends, tees, wire strippers, steel spring, cable glands, pvc junctions boxes etc.,

Annexure-II :Electrification of Tower at Kayamkulam (Valiyazhikal) Lighthouse

MODULAR SWITCH BOXES, SOCKETS AND SWITCHES

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Telephone socket outlet

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required.

3 Module (100mm * 75mm)

4 Module (125mm * 75mm)

8 Module (125mm * 125mm)

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

3 x 1.5 sq. Mm (for staricase lights, fan and light points in service room and tower bottom)

3 x 4 sq. Mm (for 6A and 16A sockets)

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Installation, testing and commissioning of ceiling fan/wall mounting fan including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

SWITCH GEARS AND DB

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole 16A - 3Nos, 10A - 4Nos.

Supplying and fixing following rating, double pole, 240 V, isolator in the commissioning etc. as required. existing MCB DB complete with connections, testing and and commissioning etc. as required.

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted\ including earthing etc. as required.

16 way,Double door

Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required.

100 mm width X 50 mm depth X 1.6 mm thickness

Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Indoor Industrial Tube Light Battens, with LED Tube ( inclusive), Philips make LED Batten with Essential 4' 20W LED Tube or Havells/ Luker make

Bulk Head Luminaries IP65/66/67 IK09/10 LED Light source (inclusive) with integrated LED source ( Philips or Havells or Luker make )

Wall Mounting Fan, 400mm sweep, Hi-Speed, Usha/Havells/ Almonard/Crompton make

15W LED 320mm round, surface mounted type ceiling fitting operated in 220V/50Hz AC of Phlips/Havells/Luker make suitable for fixing on balcony

16Amps two way Switch

UG Cable, 2Core x 6 Sqmm, Armored, Copper Conductor, HRPVC/ XLPE Insulation, Havells/Finolex make (from Power house AMF DB to DB at tower bottom one for Stair case Lighting - 40M, Main Light - 40M and Spare for main Light - 40M)

3 Core x 6 sq mm Copper Multi-stranded un armoured Cable from Tower Base DB to Service Room DB

Bare Copper wire, 10 SWG

Core Cutting charges for Laying Casing caping in stair case steps from tower Bottom to Top.

Cable laying charges from power house to Tower bottom and Tower bottom to service room for staircase wiring

Miscellaneous items for the purchase of screws, Bolts, Nuts & Washers, drill bits, cable ties, bends, tees, wire strippers, steel spring, cable glands, pvc junctions boxes etc.,

Annexure-III :Electrification of IQ and Staff Quarters at Kayamkulam (Valiyazhikal) Lighthouse

MODULAR SWITCH BOXES, SOCKETS AND SWITCHES

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required.

2 Module (75mm * 75mm) (IQ-01 No, NA-II Quarters-02 Nos)

3 Module (100mm * 75mm) (IQ-11 Nos, NA-II Quarters-08 Nos, LHA Quarters-06 Nos)

4 Module (125mm * 75mm)(IQ-09 Nos, NA-II Quarters-05 Nos, LHA Quarters-04 Nos, Security Room-02 Nos)

6 Module (200mm * 75mm)(IQ-02 Nos, NA-II Quarters-02 Nos, LHA Quarters-01 Nos)

8 Module (125mm * 125mm)(IQ-01 No, NA-II Quarters-02 Nos, LHA Quarters-01 No, Security Room-01 No)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch (IQ-33 Nos, NA-II Quarters-34 Nos, LHA Quarters-22 Nos, Security Room-05 Nos)

2 way 5/6 A switch (IQ-03 Nos, NA-II Quarters-03 Nos, LHA Quarters-04 Nos)

15/16 A switch (IQ-07 Nos, NA-II Quarters-03 Nos, LHA Quarters-02 Nos, Security Room-01 No)

3 pin 5/6 A socket outlet (IQ-09 Nos, NA-II Quarters-08 Nos, LHA Quarters-05 Nos, Security Room-01 No)

6 pin 15/16 A socket outlet (IQ-07 Nos, NA-II Quarters-03 Nos, LHA Quarters-02 Nos, Security Room-01 No)

Telephone socket outlet (IQ-01 No, NA-II Quarters-01 No, LHA Quarters-01 No, Security Room-01 No)

TV antenna socket outlet(IQ-01 No, NA-II Quarters-01 No, LHA Quarters-01 No)

Bell push(IQ-01 No, NA-II Quarters-01 No, LHA Quarters-01 No)

Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.(IQ-01 No, NA-II Quarters-01 No, LHA Quarters-01 No)

Supplying and fixing PVC batten/ angle holder including connections etc. as required(IQ-05 Nos, NA-II Quarters-04 Nos, LHA Quarters-04 Nos, Security Room-01 No)

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.(IQ-13 Nos, NA-II Quarters-17 Nos, LHA Quarters-10 Nos, Security Room-02 Nos)

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.(IQ-10 Nos, NA-II Quarters-10 Nos, LHA Quarters-10 Nos, Security Room-05 Nos)

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.(IQ-04 Nos, NA-II Quarters-04 Nos, LHA Quarters-02 Nos, Security Room-01 No)

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.(IQ-03 Nos, NA-II Quarters-04 Nos, LHA Quarters-02 Nos, Security Room-01 No)

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.(IQ-13 Nos, NA-II Quarters-19 Nos, LHA Quarters-09 Nos, Security Room-02 Nos)

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

Upto 450 mm Sweep(IQ-03 Nos, NA-II Quarters-02 Nos, LHA Quarters-02 Nos)

CONDUIT AND CABLE

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

25 mm(IQ-150, NA-II Quarters-130, LHA Quarters-120,Security Room-20 )

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

3 x 1.5 sq. mm(IQ-115, NA-II Quarters-130, LHA Quarters-85,Security Room-30 )

3 x 2.5 sq. mm (IQ-260, NA-II Quarters-180, LHA Quarters-180,Security Room-10 )

3 x 4 sq. mm (IQ-140, NA-II Quarters-60, LHA Quarters-40,Security Room-10 )

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.(IQ-30, NA-II Quarters-30, LHA Quarters-30)

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

1 pair (IQ-50, NA-II Quarters-50, LHA Quarters-50,Security Room-50 )

SWITCH GEARS

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted\ including earthing etc. as required. (But without MCB/RCCB/Isolator)

16 way, Single/Double door )(NA-II Quarters-01 Nos, LHA Quarters-01 No)

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

8 way (4 + 24), Double door )(IQ-01 No)

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

63 A(IQ-01 No)

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

40 A (NA-II Quarters-01 No, LHA Quarters-01 No, Security Room-01 No)

Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

63 A(IQ-02 Nos)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole 6A/10A/16A(IQ-20 Nos, NA-II Quarters-12 Nos, LHA Quarters-11 Nos, Security Room-03 Nos)

Supplying and fixing following rating, double pole, 240 V, isolator in the commissioning etc. as required. existing MCB DB complete with connections, testing and Commissioning

40 A(NA-II Quarters-01 No, LHA Quarters-01 No, Security Room-01 No)

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A, “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. (IQ-03 Nos)

Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.(IQ-01 No, NA-II Quarters-01 No, LHA Quarters-01 No, Security Room-01 No)

63Amps 4pole Change over MCB of Legrand / Havells make (IQ-1 No)

Indoor Industrial Tube Light Battens, with LED Tube ( inclusive), Philips make LED Batten with Essential 4' 20W LED Tube or Havells/Luker make (IQ-04 Nos, NA-II Quarters-05 Nos, LHA Quarters-04 Nos, Security Room-01 No)

Bulk Head Luminaries IP65/66/67 IK09/10 LED Light source (inclusive) with integrated LED source ( Philips or Havells/Luker make )(IQ-03 Nos, NA-II Quarters-09 Nos, LHA Quarters-02 Nos, Security Room-01 No)

Angle Batten Lamp Holder, LED light source (inclusive), Philips make with Philips 10.5/12W no dimmable Master LED Glass Bulb or Havells/Luker make (IQ-05 Nos, NA-II Quarters-04 Nos, LHA Quarters-04 Nos, Security Room-01 No)

Wall Mounting Luminaries, Philips make QWG 303/Divine/Delight/Tribal with 7W Full Glass LED lamp B22/E27 ( Non Dimmable) Philips/Luker/Havells Make(IQ-04 Nos, NA-II Quarters-04 Nos, LHA Quarters-02 Nos)

Wall Mounting Luminaries, Philips make LED Mirror Fitting with LED Lamp ( Non Dimmable) Philips/Luker/Havells Make(IQ-02 Nos, NA-II Quarters-01 No, LHA Quarters-01 No)

Exhaust Fan, 450mm sweep, Metallic DBB, Almonard/Havells/Crompton make(IQ-03 Nos, NA-II Quarters-02 Nos, LHA Quarters-02 Nos)

Ceiling Fan, Electro-phoretic lacquered/Electroplated surface for anti-rusting, High speed fan with wider tip blade for effective air circulation with Sweep 1200mm and Hight performance even at low voltage, Havelle or Cromption or Usha make(IQ-04 Nos, NA-II Quarters-04 Nos, LHA Quarters-02 Nos, Security Room-01 No)

UG Cable, 4Core x 16 mm2, Armored, Copper Conductor, HRPVC/ XLPE Insulation, Havells/Finolex make (from KSEB pole to energy meter at IQ and Power house to IQ for Gen Supply (IQ-100)

UG Cable, 2Core x 4 mm2, Armored, Copper Conductor, HRPVC/ XLPE Insulation, Havells/Finolex make (from KSEB pole to energy meter at all quarters)(NA-II Quarters-50, LHA Quarters-50, Security Room-50)

1.5 Ton Air Conditioner 5 star rated, anti-corrosive blue fin copper condenser, R22 Refriegerant/R410A Eco- freindly Refrigerant, Blue Star S-series make with 4KVA Stabilizer V-guard or any other reputed make and GI Stand for Outdoor Unit (IQ- 03 Nos)

43" inch full HD LED TV ( Sony/Samsung/LG) (IQ- 01 No)

Refrigerator 185L, 5 Star, Direct Cool (Whirlppol /LG/Samsung )(IQ- 01 No)

Washing Machine 6 Kg front load (IFB /Whirlppol /LG/Samsung )(IQ- 01 No)

Dish TV Receiver(IQ- 01 No)

10 L Storage Water Heater, 5 star rated, Vertical mounting type, Racold Eterno 2 make or equivalent(IQ- 02 Nos)

LT surge arrester, low voltage SPD, T1+T2, Iimp - 25 kA, 3P+N, protection level - Type I & II, Legrand make(IQ- 01 No)

Security amount, application charges, meter installation charges to KSEB (IQ, NA-II,LHA)

Energy Meter Box for keeping and energy meter and cut outs(IQ, NA-II,LHA)

Bare Copper wire, 10 SWG for running earth from TPN & SPN DBs to Meter Box and to earth pit(IQ-3, NA-II Quarters-1, LHA Quarters-3, Security Room-0.5)

Earthing Back Fill Compound (25kg Bags)(IQ-1, NA-II Quarters-1, LHA Quarters-1, Security Room-1)

UG Cable laying and termination by digging trenches 1ft wide x 2ft depth, laying of UG Cable and covering of UG Cable with bricks and covering of the trenches (IQ-1, NA-II Quarters-1, LHA Quarters-1, Security Room-1)

Miscellaneous items for the purchase of screws, Bolts, Nuts & Washers, drill bits, cable ties, bends, tees, wire strippers, steel spring, cable glands, pvc junctions boxes etc., (IQ-1, NA-II Quarters-1, LHA Quarters-1, Security Room-1)

Annexure-IV :Provision of Street lights and garden cum gate lights at Kayamkulam (Valiyazhikal) Lighthouse

ELECTRICAL FITTINGS

Outdoor IP65, 20W LED Street light Philips/Crompton/Syska/Havells or Equivalent

Outdoor IP65 Wall Mounting (Gate Light) Luminaries, 10W LED Light source

Clear glass Acrylic Lighthouse model 16" Dia Garden Light fitting with 15W LED light suitable for Garden Light of Philips make

FABRICATION OF STREET LIGHT AND GARDEN LIGHT POLES AND ACCESSORIES

3” dia GI C Class Pipe, Tata/Jindal make (3m) length for Street light Poles threaded at both sides [one pipe = 6m length]

1 1/2 ” dia GI C Class Pipe, Tata/Jindal make (1.5m) length for Garden light Poles [one pipe = 6m length]

8mm thick MS Plate of size 450x450mm (approx. 15Kg each) for Base plate of Street light Poles including gas cutting charges in required size

8mm thick MS Plate of size 250x250mm (approx. 5Kg each) for Base plate of Garden light Poles including gas cutting charges in required size

Fabrication of garden light Poles by welding MS base plate and making holes of 1 1/2 ” GI pipe

Fabrication of Street light Poles by welding MS base plate to non-threaded end of 3” GI pipe with plain 3” dia GI flanges

3”x1¼” GI C Class Threaded Reducer Socket for Street light Poles

1¼ ” dia GI C Class Pipe, Tata/Jindal make (2m) length for Bend Pipes of Street light Poles [one pipe = 6m length]

Fabrication of Bend Pipe by threading using lathe work 1¼ “ dia GI pipe and pipe bending

SMC Pole mounted Junction Box with side hinged door, IP55, Sintex make GSJB 2014

Fabrication of GI Half Clamps for the Sintex JBs inclusive of material and labour charges

6A MCB Single pole of 'C' curve of Legrand / Havells make

30A 6way Closed Bakelite type Terminal Connector for each JB

4way Earth Strip Terminal Connector

3” dia GI B Class Pipe, Tata/Jindal make for UG Cable crossover at pathways [one pipe = 6m length]

FOUNDATION AND BASE WORK FOR STREET LIGHTS

Earth work Excavation(0.6 x 0.6 x 0.5m) for the foundation and 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) Concrete Work (0.6 x 0.6 x 0.5m) for the foundation with Post pipe placed in concrete inclusive of materials and Brick Work (0.45 x 0.3 x 0.45m) for post base and placing of pipes for cable entry and Plastering Work (2 x 0.45 x 0.45 + 2 x 0.3 x 0.45 + 0.3 x 0.45m) for post base and Painting Work (2 x 0.45 x 0.45 + 2 x 0.3 x 0.45 + 0.3 x 0.45m) for post base of Street light Posts

Earth work Excavation(1 1/2 ' x 1 1/2 ' x1 1/2' ) for the foundation and 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) Concrete Work (1 1/2 ' x 1 1/2 ' x1 1/2' ) for the foundation with Post pipe placed in concrete inclusive of materials and Brick Work (1' x 1' x 1') for post base and placing of pipes for cable entry and complete Plastering and painting Work of Garden light pole

PUMP HOUSE ACCESSOIRES

Single Phase 2 HP High Speed centrifugal Monoblock Pump

Single Phase Motor Starter Panel Box, Sintex make with complete accessories such as Voltmeter, Ammeter, provision for MCB, 16A SP MCB, Indication Lamp, Start & Stop panel buttons, etc.,.

DOL Motor Starter Panel Box, Sintex make with MF1 Single Phase DOL Starter, L & T make for 2HP Single Phase Pump

WIRES AND CABLES

UG Cable, 2 Core x 2.5mm2 Copper conductor, Armoured, Flame Retardant type, Finolex / Havells/ATC make for Outgoing Mains to Street light, gate light and Security room

2 core x 4 Sq.mm 1100V/ Copper conductor XLPE Armored UG cable of Finolex/ Havells laying from Power house to Pump room

Miscellaneous items for the purchase of screws, Bolts, Nuts & Washers, drill bits, cable ties, bends, tees, wire strippers, steel spring, cable glands, pvc junctions boxes etc.,

UG Cable laying and termination by digging trenches 1ft wide x 2ft depth, laying of UG Cable and covering of UG Cable with bricks and covering of the trenches.

Electrician (Labour) Charges for wiring of street lights, Gardens Lights and fitting luminaries

Annexure-V :Procurement and installation of Power equipments and Accessories for Kayamkulam(Valiyazhikal) Lighthouse

WIRES AND CABLES

25 sq.mm 1100V/ISI FR PVC insulated multi strand copper conductor wire of Finolex/Havells make suitable for interconnection between stabilizer to AMF Panel.

4 core x 50 Sq.mm 1100V/ Copper conductor XLPE Armored UG cable of Finolex/ Havells laying from KSEB Transformer to KSEB Meter Board and Gen set to AMF Panel in Power house

LIGHT, SWITCHES AND SWITCH GEARS

LT Distribution panel with EB Energy Meter cutout compartment, Fabricated out of 16WSG CRCA sheet not less than 2mm thick, powder coated, dust/vermin proof, compartmentmentalized with hinged doors, comprising of Incomer 200A, 415V Kitkat fuse - 3Nos, 200A, 415V Neutral Link, 200A SFU with HRC fuse, 200A 4P RCCB,4P Surge protective unit, 200A 4P MCCB, 200A 4P Change over Switch and Out Going 2 nos. 125Amps TPN Fuse Switch, 3Nos. 63A 4pole MCB, 3Nos. 40A 2pole MCB and 6 Nos. 20Amps DP MCB with Indication Lamps (R,Y,B) and Digital Multi Enery meter( voltage, Current and Frequency) along with necessary current Transformers) in Powerhouse

LT Distribution panel fabricated out of 16WSG CRCA sheet not less than 2mm thick, powder coated, dust/vermin proof, compartmentmentalized with hinged doors, comprising of Incomer 1No. 40Amps 2 Pole I/O, Out Going 4Nos. 16Amps MCB with digital voltmeter, Ammeter etc. in Tower Top (Service Room)

Supply of Reputed make Single phase 12.5 KVA Servo Controlled voltage stabilizer with buck boost facility, input voltage 170V-270V / 50Hz & output 230V +/- 1%. Voltage correction15V/sec. with spare PCB 1 No. 3 in service and 1 in spare.

Supply of of Reputed make 0-40V, 40A, dimmerstat controlled battery charger comprising of voltmeter, Ammeter, protection fuses for input and output.

PVC, COPPER, ALLUMINIUM AND MISCELLINOUS ITEMS

2' x 6' x 3.5mm ISI electrical rubber mate. Two at Power house and one at service room

PVC insulation tape

2' x 2' x 3mm electrolytic grade(99.9%) copper plate for earthing 2 nos. one for body earth and another one for neutral (10Kg x 2Nos.)

25 x 3mm electrolytic grade(99.9%) copper tape for earthing

10 SWG bare copper wire for inter connecting the earthings

1 1/2" "C" Class GI Pippe for earth

Eco friendly Earthing compound for 2 Nos. earth pit (25kg bag)

Supply of dry powder fire extinguisher suitable for electric fire of 2 Kg

8' x 4' x 6mm Aluminium chequered plate for trench ( per plate weight 50 kg) (2 plate=100kg)

9" cement concrete half round pipe for protecting the UG cable laying underground ( each 1 metre length) from KSEB Transformer to power house

CI cable routing marker for showing where the cables laid. At the distance of 5 mtr.

LABOUR AND OTHER CHARGES

Labour charges for laying UG cable from EB Transformer to power house by digging the earth in the depth of 2' complete.

Labour charges for providing 2' x 2' Plate earthing and pipe earthing for neutral and body of panel

Labour charges for erection of Meter board with LT Distribution Board, and installation of stabilizers

Security amount, application charges, meter installation charges to KSEB

POWER LINKS ASSOCIATES

Linsta Services

POZITIVE POWER INDIA PVT. LTD