21/EDCG/2025-26

Amount

Supply and Mounting of Tailless unit in various places in EDD Mohammdi as per details below-(All consumables and Hardware (Like- Lugs, Nuts-Bolt & washer/Fasteners etc) and other required Material have to be provided by the agency /Contracter)

Supply of installation(for 250 KVA DT) of Tailness Unit 500 Amps 650 Volts confirming to Henley Standard manufactured from 18 SWG MS sheet duly painted withtwo coats Grey Enameled paint with one coat Red Primer.The MS sheet having 07 holes suitable for 06 Nos TOP & bottom Insulator and one hole for Neutral. The Top & Bottom Insulator should be fitted by 06 Nos Hexagonal Clamps with 06 Nos brass sheet for tightening the Metal Part connector and 07 Nos . Copper spring contact (Maid for copper strip of size 44x4.5 mm) 03 Nos " L" contact 01 no neutral phase with contact including 03 nos metal part connector for holding bus bar / Alum. cable Tailness unit should be 54 inch length and 5.5' width including nuts ,bols and washer. The MS Steel Patti have drilled hole at bottom for tighting and 01 casted sheet strips with drilled hole at the copper point of MS sheet for tighteing with base.( All material will provided by the contractor.)

Supply and fixing of All Busbar 1000x65x10 MM

Supply and fixing of L-PIECE Copper 200x50x6 MM

Supply and fixing of Alum. Lug 400 sq mm of standard dimesnion

Supply and fixing of FUSE WIRE

TELLESS UNIT STRUCTURE MADE OF MS CHANNEL 100X50X6 MM

Supply of installation(for 400 KVA DT) of Tailness Unit 500 Amps 650 Volts confirming to Henley Standard manufactured from 18 SWG MS sheet duly painted withtwo coats Grey Enameled paint with one coat Red Primer.The MS sheet having 07 holes suitable for 06 Nos TOP & bottom Insulator and one hole for Neutral. The Top & Bottom Insulator should be fitted by 06 Nos Hexagonal Clamps with 06 Nos brass sheet for tightening the Metal Part connector and 07 Nos . Copper spring contact (Maid for copper strip of size 44x4.5 mm) 03 Nos " L" contact 01 no neutral phase with contact including 03 nos metal part connector for holding bus bar / Alum. cable Tailness unit should be 54 inch length and 5.5' width including nuts ,bols and washer. The MS Steel Patti have drilled hole at bottom for tighting and 01 casted sheet strips with drilled hole at the copper point of MS sheet for tighteing with base.( All material will provided by the contractor.)

Supply and fixing of All Busbar 1000x65x10 MM

Supply and fixing of L-PIECE Copper 200x50x6 MM

Supply and fixing of Alum. Lug 630 sq mm of standard dimesnion

Supply and fixing of FUSE WIRE

TELLESS UNIT STRUCTURE MADE OF MS CHANNEL 100X50X6 MM

GST Extra

M/S MURTI ENTERPRISES (BID ID -5150219)