Project No.117/2024-25-

Amount

Sheet roofing

10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

OD123934/2024-2025:Providing and fixingprecoated galvanised iron profile sheets(size ,shape and pitch of corrugation as approved by Engineer-in-charge)0.35mm (+0.05%),tottal coated thickness with zinc coatind 120grams per sqm as per IS:277,in 240 mpa steel grade ,5-7microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length up to 12 metre or as desired by Engineer -in-Charge.The sheet shall be fixed using self drilling / self tapping screws of size(5.5x55mm) with EPDM seal complete up to any pitch in horizontal / vertical orcurved surfaces excluding cost of purlins,rafters and trusses and including cutting and shape wherever required

OD123968/2024-2025:Providing and fixing precoated galvanised steel sheet roofing accessories 0.40mm(+0.05%) tottal coated thickness ,zine coating 120 grams per sqm as per IS:mm(+0.05%) tottal coated thickness,Zinc coating 120 grams per sqm as per IS:277,in 240 mpa steel grade,5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling /self tapping screws complete : Ridges plain (500-600mm)

OD123935/2024-2025:Providing and fixing 200 mm wide square uPVC rain water gutter including allnecessary fittings and making all necessary connnections complete as per the direction of engineer in charge at site

OD124122/2024-2025:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M30 grade made by block making machine with strong vibratory compaction, of approved size, design& shape, laid in required colour and pattern over and including 50 mm thick compacted bed of stone aggregate, etc. all complete as per the direction of Engineer-incharge.OD 80/21-22

E.S.ABOOBACKER (BID ID -1973612)

Bidder Name

Benoy

E.S.ABOOBACKER