SPECIAL REPAIR FOR CENTRIFUGAL PUMP SETS AGAINST BER AT SECT C1 AND C2 AND PROVN OF CHEMICAL DOSING SYS FOR SYL FILTRATION PLANT UNDER GE U AMBALA CANTT

Supplying installing, testing and commissioning centrifugal pump set with squirrel cage induction motor 25 HP, 1450 RPM, 415 V, 3 Phase, 50 Hz, TEFC, IP55 protection, Class 'F' insulation, coupled with horizantal split casing pump not less than 1500 LPM water discharge, 20 meter head, dynamically balanced impeller, stainless steel shaft, mechanical seal, antifriction bearings, flexible coupling with coupling guard, common MS fabricated base frame, foundation bolts, anti-vibration pads, all accessories, internal wiring between motor and starter, painting, alignment, trial run and performance testing, suitable for delivering the specified discharge against the required total head complete all as specified and directed.

Supplying installing, testing and commissioning centrifugal pump set with squirrel cage induction motor 10 HP, 1450 RPM, 415 V, 3 Phase, 50 Hz, TEFC, IP55 protection, Class 'F' insulation, coupled with horizantal split casing pump not less than 600 LPM water discharge, 20 meter head, dynamically balanced impeller, stainless steel shaft, mechanical seal, antifriction bearings, flexible coupling with coupling guard, common MS fabricated base frame, foundation bolts, anti-vibration pads, all accessories, internal wiring between motor and starter, painting, alignment, trial run and performance testing, suitable for delivering the specified discharge against the required total head complete all as specified and directed.

Supplying installing, testing and commissioning centrifugal pump set with squirrel cage induction motor 120 HP, 1450 RPM, 415 V, 3 Phase, 50 Hz, TEFC, IP55 protection, Class 'F' insulation, coupled with horizantal split casing pump not less than 50000 GPH water discharge, 80 meter head, TEFC, IP55 protection, Class 'F' insulation, complete with cast iron pump casing, dynamically balanced impeller, stainless steel shaft, mechanical seal, antifriction bearings, flexible coupling with coupling guard, common MS fabricated base frame, foundation bolts, anti-vibration pads, all accessories, internal wiring between motor and starter, painting, alignment, trial run and performance testing, suitable for delivering the specified discharge against the required total head complete all as specified and directed.

Supplying installing, testing and commissioning submersible bore well pump set suitable for installation in 300 mm dia bore well casing pipe, capacity of 50 HP, not less than 8 stage, discharge 1500 LPM, head 90 meter, directly coupled with 50 HP, 415 Volts, 3 Phase, 50 Hz, squirrel cage induction submersible motor, water-filled/water-lubricated, suitable for continuous duty, complete with multistage centrifugal pump, stainless steel shaft, SS impellers, lowering into bore well, alignment, connection to delivery main, testing, trial run and commissioning complete all as specified and directed.

Supplying installing, testing and commissioning submersible bore well pump set suitable for installation in 300 mm dia casing pipe, having a hydraulic capacity of 62 HP, not less than 8 stage, head 90 mtr , discharge 2000 LPM directly coupled with a 62 HP, 415 Volts, 3 Phase, 50 Hz, squirrel cage induction submersible motor, water-filled/water-lubricated, suitable for continuous duty, complete with stainless steel shaft, stainless steel impellers and diffusers, heavy-duty thrust bearing complete all as specified and directed.

Supplying installing, testing and commissioning non-clogging dewatering pump set of 3.5 HP capacity, capable of delivering the specified discharge against a total head of 18 metres, vertical submersible centrifugal type with non-clog impeller suitable for handling dirty water, sewage, silt-laden water and suspended solids, directly coupled with 415 Volts, 3 Phase, 50 Hz, squirrel cage induction submersible motor, TEFC/IP68, Class 'F' insulation, suitable for continuous duty, complete with cast iron pump casing, abrasion-resistant impeller, stainless steel shaft, double mechanical seal in oil chamber, heavy-duty bearings, discharge connection complete all as specified and directed.

Supply, Laying & fixing MS Pipe (Heavy class 'C') of sizes 150 mm laid in Horizontal/Vertical/inclined position or laying on floors for connections of pump, either inlet side or outlet side complete all as specified and directed. Note:- (i) MS Flanges and joint shall be deemed to be included in unit quoted rate. .

Supply, Laying & fixing MS Pipe (Heavy class 'C') of sizes 100 mm laid in Horizontal/Vertical/inclined position or laying on floors for connections of pump, either inlet side or outlet side complete all as specified and directed. Note:- (i) MS Flanges and joint shall be deemed to be included in unit quoted rate. .

Supply & Fix CI/ DI fitting flanged type such as bends , reducer, elbow upto 150 mm bore complete all as specified and directed.

Supply & fixing of chlorinator full vaccum type of capacity 0-1000 gms per hr with accessories like vaccum ejector, rotameter Assy, ejector non return valve, suitable booster pump set alongwith starter -02 set each suitable PE tubing 8 mtrs chlorine solution line of size 15 to 25 mm, 24 mtr booster pump suction line 12 mtr with NRV gate/ball valve auto chlorine dozing system consist of one flow proportionate valve, one residual chlorine analyser with flow cell and sensor (B&C) with one lot of interconnective piping and wires, two nos of gas cyclinders of 100 kg capacity with test certificate with direct display of water parameter like PH Value, Chlorine PPM, Temprature, conductivity and TDS on 22 inch LED with HMI. The entire work includes provisioning of all materials, labour, tools, plants, testing apparatus, and structural supports required for execution complete all as specified and directed.