DEFPROC

Active

Works

Civil Works

8582/E8 SPL REPAIR TO OTM ACCN BLDG NO P-06 OF INF BN NO-III AT SHAHJAHANPUR CANTT UNDER GE (EAST) BAREILLY

E-IN-C BRANCH - MILITARY ENGINEER SERVICES

GE (EAST) BAREILLY | Bareilly, Uttar Pradesh | Shahjahanpur, Uttar Pradesh

Amount: ₹47.6 LCloses: 31 Oct 2026

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published10 Oct 2026
Submission Opens24 Oct 2026
Closes31 Oct 2026
Bid Opening7 Nov 2026

Tender Value

₹47.6 L

EMD Value

₹95,300

Closing Date

31 Oct 2026, 6:00 pm

Tender Inviting Organisation

Name

GE (EAST) BAREILLY

Address

GE (EAST) BAREILLY, NEAR SHAHJAHANPUR ROAD BAREILLY

Work Description

8582/E8 SPL REPAIR TO OTM ACCN BLDG NO P-06 OF INF BN NO-III AT SHAHJAHANPUR CANTT UNDER GE (EAST) BAREILLY

Tender Information

Tender ID

2026_MES_793350_1

Reference Number

8582/E8

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Item Rate

Period of Work

180 days

Location

GE (EAST) BAREILLY

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical

RequiredScanned copy of application and of DD/bankers cheque as cost of tender and EMD (unenlisted contracto (.pdf)

RequiredScanned copy of enlistment letter in MES (.pdf)

RequiredScanned copy of Provident fund Code Number and GST registration Number (.pdf)

RequiredCopy of all credentials required for bidders not enlisted in MES (.pdf)

RequiredList of present residual all work in hand in case of E Class contractor (.pdf)

Finance

RequiredBOQ (.xls)

RequiredTender Documents (.pdf)

Fee & Financial Details

Tender Fee Amount

₹500

Tender Fee Exemption Allowed

Yes

Tender Fee Payable To

GE (EAST) BAREILLY

EMD Fee Amount

₹95,300

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

10 Oct 2026

Published

10 Oct 2026

Bid Opening

7 Nov 2026

Download Starts

10 Oct 2026

Download Ends

31 Oct 2026

Submission Starts

24 Oct 2026

Bill of Quantities

Item RateBoQ_Ver4.0INR

BoQ1 (120 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Taking down of chowkhats or frame exc 1.5 Sqm but n.exc 4.0 Sqm (without taking off shutters from the frames) complete all as specified and directed.	21	Each	-	-
2	Taking down chowkhats or window frames n.exc 1.5 Sqm each (without taking off shutters from frames) complete all as specified and directed.	56	Each	-	-
3	Dismantling framed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and as directed by Engr-in-Charge	35	Cum	-	-
4	Dismantling of asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings complete.	1,080	Sqm	-	-
5	S&F of Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa (coating of AZ 150 GSM) as in roof covering/cladding to wall, fixed with self tapping screws as specified .	1,080	Sqm	-	-
6	S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa (coating of AZ 150 GSM) as in ridges, roof covering/cladding to wall,fixed with self tapping screws as specified	42	Sqm	-	-
7	M&L roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings, and heavy bracket framing (Beam, tee,channel, angle or flat sections ) incl distance pieces, cleats confirming to Fe 410-W gde 250 quality A etc complete all as specified and as directed.	8,350	Kg	-	-
8	Fabrication and erection of roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings, and heavy bracket framing (Beam, tee,channel, angle or flat sections ) incl distance pieces, cleats including dismantling of old MS angle irons and reuse of same for fabrication complete all as specified and as directed.	5,350	Kg	-	-
9	M&L applying two coats of synthetic enamel paint over a coat of red oxide or zinc chrome primer including preparation of new steel or iron surfaces exc 10 cm width or girth, complete all as specified and directed.	485	Sqm	-	-
10	S&F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides and including decorative laminate 0.60 mm thick type 1 of surface finish and other side balancing white laminate 0.30 mm thick, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.	40	Sqm	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 3.32 MB

Work Item Documents

Tender8582.pdf

Tender Documents • 2.17 MB

BOQ_889680.xls

BOQ • 4.82 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Taking down of chowkhats or frame exc 1.5 Sqm but n.exc 4.0 Sqm (without taking off shutters from the frames) complete all as specified and directed.

Each

Taking down chowkhats or window frames n.exc 1.5 Sqm each (without taking off shutters from frames) complete all as specified and directed.

Each

Dismantling framed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and as directed by Engr-in-Charge

Cum

Dismantling of asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings complete.

1,080

Sqm

S&F of Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa (coating of AZ 150 GSM) as in roof covering/cladding to wall, fixed with self tapping screws as specified .

1,080

Sqm

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa (coating of AZ 150 GSM) as in ridges, roof covering/cladding to wall,fixed with self tapping screws as specified

Sqm

M&L roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings, and heavy bracket framing (Beam, tee,channel, angle or flat sections ) incl distance pieces, cleats confirming to Fe 410-W gde 250 quality A etc complete all as specified and as directed.

8,350

Fabrication and erection of roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings, and heavy bracket framing (Beam, tee,channel, angle or flat sections ) incl distance pieces, cleats including dismantling of old MS angle irons and reuse of same for fabrication complete all as specified and as directed.

5,350

M&L applying two coats of synthetic enamel paint over a coat of red oxide or zinc chrome primer including preparation of new steel or iron surfaces exc 10 cm width or girth, complete all as specified and directed.

485

Sqm

S&F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides and including decorative laminate 0.60 mm thick type 1 of surface finish and other side balancing white laminate 0.30 mm thick, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

Sqm