Repair and maintenance of yag Mandap kali Mandir

Civil work

12 mm cement plaster of mix 1:6 (1 cement: 6 fine sand)

Finishing walls with water proofing cement paint of required shadeOld work (one or more coats @ 2.20 kg/10 sqm) complete.

Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in superstructure above plinth level up to floor five level in

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 13.99.1 One or more coats on old work

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired byEngineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curvedsurfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

P/F mmps Flooring 1:2:4

Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on abed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burntclay non modular bricks

P/F 2 mm Thick ms Sheet Door

Total impact of GST for the purpose of CTC