CONSTRUCTION OF SCHOOL BUILDING AND STAFF QUARTERS FOR KENDRIYA VIDYALAYA AT SAMBA

Amount

Schedule "A" Part – I to Schedule "A" Part – XI: NOTE: Schedule "A" Part – I to Part – XI are prepriced by MES. Bidders shall insert their Lumpsum amount in Green coloured field under Column - 6 only

Lumpsum price worked out by the contractor for "BUILDINGS & STRUCTURES", as listed in Schedule "A" Part – I

Lumpsum price worked out by the contractor for "SITE CLEARANCE / AREA DEVELOPMENT/EARTH WORK/EXCAVATION", as listed in Schedule "A" Part – II

Lumpsum price worked out by the contractor for "INTERNAL WATER SUPPLY", as listed in Schedule "A" Part – III

Lumpsum price worked out by the contractor for "INTERNAL ELECTRIFICATION", as listed in Schedule "A" Part – IV

Lumpsum price worked out by the contractor for "SEWAGE DISPOSAL", as listed in Schedule "A" Part – V

Lumpsum price worked out by the contractor for "EXTERNAL WATER SUPPLY", as listed in Schedule "A" Part – VI

Lumpsum price worked out by the contractor for "EXTERNAL ELECTRIFICATION", as listed in Schedule "A" Part – VII

Lumpsum price worked out by the contractor for "ROADS /PATH/CULVERT", as listed in Schedule "A" Part – VIII

Lumpsum price worked out by the contractor for "AREA DRAINAGE", as listed in Schedule "A" Part – IX

Lumpsum price worked out by the contractor for "PROTECTIVE WORK", as listed in Schedule "A" Part – X

Lumpsum price worked out by the contractor for "SECURITY WALL/FENCING/GATE", as listed in Schedule "A" Part – XI

PROVISIONAL SUM a) Provide a Provisional Sum for:- (i) Badminton court : 01 No (ii) Volley ball Court : 01 No (iii) Basket ball Court : 01 No

Schedule "A" Part - XII: [Miscellaneous Items]

ROAD/PATH/CULVERT

M & L for laying hot applied thermoplastic compound (paint) 2.5mm thick incl reflectrising glass beads incl cost of all materials labour macinerry T&P etc required for proper completion of work incl all other charges. The finish surfaces to be leveled, uniform and free from streaks and holes as per MORTH specification no. 803 as per IRC. painting lines, dashes, arrows, letters etc on roads, pavements and the like exc 10 cm wide with road marking paint, white or golden yellow complete all as specified and directed

S & F of cats eye of a very dennesion/ 3M make or approved qulity in size of width not exc 120mm and ht not exc 20mm made up of strong engineering polymer thrmoplastic polyurethane with electronic welded abrasion resistant lances for retro reflection in dry & wet weather condition along with bituminous adhesive as per MORTH specification complete all as specified and directed

M & L precast PCC using M-30 grade kerbstone of size 30cm x 30cm x 12cm, fixed with 20mm cement mortar 1 :4 bedding and jointed in cement mortar 1:4 and struck flush complete all as specified and directed

S&F Road sign boards comprising of 1 plates of size 1500mm x 900 mm fixed one above the another made of 2 mm thick aluminium sheet duly framed in 40x40 mm squre MS pipe of 16 guge & provided with 25 mm x 25mm hold fasts. The plates fixed with aluminium rivets and written on both sides indicating the direction with single arrow on each plate with computer cut letters and signs (Reflective ) as directed of appropriate size and white in colurs and dennison HIP base blue. The boards (paltes) supported with bolts over a pair of legs made of MS square tubes 75mm x75 mm of 16 guage sheet of length (height) 11' each above ground including embedding in PCC(1:2;4) type B-1 blocks of size 60 cm x 60 cmx 75 cm making post holes & eath work. The pipes to be painted with balck & white 1st quality synthetic enamel paint two coats over a coat of red oxide primer(pegged sign boards fully reflective) complete all as specified and directed.

INTERNAL ELECTRIFICATION

M & L earthing complete with galvanised steel earth plate electrode 600 X 600 X 6 mm thick burried directly in ground [earth pit not less than 2.25 m deep below ground level] with top edge of Plate not less than 1.50 m below normal ground level connected to GI earth lead wire 4.0 mm dia [earth lead] and GI pipe 50 mm, medium grade for earthing lead protection to the extent of maximum 7.5m, earth plate electrode surrounded by 150 mm thick packed layers of charcoal and common salt filled in alternate layers, connected to the plate by means of GI Bolts & Nuts complete all as per electrical plate No. 3 of SSR Part – I, connected to panel / DB including testing on completion including main earthing, charcoal, common Salt, PCC [1:2:4, Type B1] Pit with RCC 1:2:4, type B1 Cover, 50 mm thick with 6 Nos, 8 mm dia TMT bars in both ways, MS frame made with 40 X 40 X 6 mm angle Iron, MS Funnel with 20 mm bore, medium grade GI Watering pipe, wire mesh, earth work excavation, return filling, removal of surplus soil etc. complete all as specified. Note: GI earth wire upto 7.5 metres shall be deemed to be included in the quoted lumpsum and beyond 7.5 metre shall be measured and paid separately under relavent item.

S& F surface/wall mounted batten LED luminaire 20 watt 6500 K decorative ultra slim square profile LED lighting fixture with extruded polycarbonate including flexible copper conductor cable of suitable size from ceiling rose to connector of LED fitting complete all as specified and as directed.

S&F round shape 6 watt 220 volts AC surface mounted slim round downlighter with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with 03 core flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F round shape 15 watt 220 volts AC surface mounted slim round downlighter with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with 03 core flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F High performance IP66 LED streetlight 20 watt, housing made of die-cast aluminium with street optics lens with all accessories and connecting up with and including provision of 3 core flexible copper wire of size 1.5 sqmm from ceiling rose and 20 watt LED light etc drawn through and including 32 mm bore GI light grade protection pipe upto 1.0 m length with suitable fixing accessories on walls complete all as specified and as directed.

S&F High performance IP66 LED flood light 150 watt, housing made of die-cast aluminium with street optics lens with all accessories and connecting up with and including provision of 3 core flexible copper wire of size 1.5 sqmm from ceiling rose etc with suitable fixing accessories on walls complete all as specified and as directed.

S&F LED lamp 9 watt B-22 holder base with polycarbonate body and aluminium heat sink warm white light complete all as specified and as directed.

S&F single pole and neutral enclosure with with a two pin and earth socket with one single pole MCB 20 amps complete all as specified and directed.

S&F pop up type flush mounting boxes 6 modules, matt aluminium finish, equipped with push and slide locking system and socket outlets suitable for installation in concrete floors complete all as specified and directed.

S&F wall mounted fan 450 mm sweep complete all as specified and directed.

S&F MCCB 25 to 100 Amp 415 V 16 KA 4 pole in the DB complete with connection testing and commissioning complete all as specified and directed.

S&F SPN 12 way sheet metal enclosure factory made DB double door 230 V AC, 50 Hz AC 100 Amp rated copper bus bar as per IEC 61439-3 neutral bar, earth bar, IP-43 complete all as specified and directed.

S&F SPN 4 way sheet metal enclosure factory made DB double door 230 V AC, 50 Hz AC 100 Amp rated copper bus bar as per IEC 61439-3 neutral bar, earth bar, IP-43 complete all as specified and directed.

S&F VTPN Loadline DB as per IEC 61439-3 with 250 Amp copper bus bar , 02 neutral bar, 02 earth bar, fully insulated bus bar, blanking plates (without MCCB) double door 04 way suitable for 160 amp MCCB incomer, IP 43 protection 415 V AC 50 Hz AC complete all as specified and directed.

S&F VTPN Loadline DB as per IEC 61439-3 with 250 Amp copper bus bar , 02 neutral bar, 02 earth bar, fully insulated bus bar, blanking plates (without MCCB) double door 06 way suitable for 160 amp MCCB incomer, IP 43 protection 415 V AC 50 Hz AC complete all as specified and directed.

S&F Meter Box suitable for installation of 01 phase/03 phase electronic meter complete all as specified and directed.

Supply and Fix smart meter as per IS 16444, three phase, temper proof, static meter of class 1.0, 415 V, 40-200 A including polycarbonate meter box complete all as specified and directed.

EXTERNAL WATER SUPPLY

Supplying and laying of DI pipes S/S including specials class K-9 laid in trenches or laying in floors of diameter 100 mm complete all as specified.

Cutting the existing DI water supply pipe line 150mm dia and inserting Tee 150x150x100 mm complete all as specified.

M & L for Construction of brick masonry valve chamber of internal dimensions 900 x 900 x 900 mm, bottom floor of the pit shall be constructed in PCC (1:3:6) 15 cm thick with 20 mm stone aggregate, inner and exposed surfaces and bottom floor of the pit should be plastered in CM (1:4) 15 mm thick. The top cover of the pit shall be made out of MS sheet min 3 mm thick with angle iron frame made out of MS angle 40 mm x 40 mm x 6 mm with 02 nos steel hinges and locking arrangements duly painted with two coats of synthetic enamel paint over one coat of red oxide primer all as specified and as directed

SEWAGE DISPOSAL

RCC septic tank for 100 Users designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design mix in walls, base slab, baffle walls and roof slab including beams etc with Vent shaft, man hole openings with cover connection etc., complete with eff depth of 1.5 m and overall depth of 3 m complete all as specified and as directed as per drawing No CEPZ/STD-199/20 Sh 1/2 to 2/2.

On site LLDPE septic tank for 25 Users (UPFLOW FILTER INLCUDING MEDIA) designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete all as specified and as directed.

Soakage well excavation in ordinary soil foundation on PCC 1:3:6 walls of honeycombed and solid in M25 concrete including intercepting chambers, screen chambers, brick work in CM , RCC cover slab in M25 /RR masonry /filling with brick bats complete of size 2.4 mtr dia 3.00 m deep complete all as specified and as directed.

Soakage well excavation in ordinary soil foundation on PCC 1:3:6 walls of honeycombed and solid in M25 concrete including intercepting chambers, screen chambers, brick work in CM , RCC cover slab in M25 /RR masonry /filling with brick bats complete of size 1.8 mtr dia 3.00m deep complete all as specified and as directed.

SECURITY WALL/FENCING/GATE

S & F of concentrina coil size 900 mm dia fixed on top of boundary wall for suitable galvanised mild steel wire, staples or steel pins, etc. complete all as specified and as directed

Construction of steel gate (ornamental type) 5.50 metre wide, and 3.00 m height as shown on drawing alongwith 02 Nos RCC columns including painting steel surface with two coats of synthetic enamel paint over a coat of primer and earth work in any type of soil complete all as specified and shown in drawing NO CEPZ/STD-107/09 Sh No 1/1 complete all as apecified and as directed. Note:-Light fittings though shown in drawing is out side the scope form this item. However 20mm bore GI pipe light grade shall be embedded in each column for full height of column.

Construction of steel gate (ornamental type) 1.20 metre wide, and 2.40 m height as shown on drawing alongwith 02 Nos RCC columns including painting steel surface with two coats of synthetic enamel paint over a coat of primer and earth work in any type of soil complete all as specified and shown in drawing NO CEPZ/STD-096/06 Sh No 1/1 complete all as apecified and as directed. Note:-Light fittings though shown in drawing is out side the scope form this item. However 20mm bore GI pipe light grade shall be embedded in each column for full height of column.

EXTERNAL ELECTRIC SUPPLY

Supply and fixing air break switch gang operated (GOD) triple pole with drop out fuses mechanically operated, mounted on insulators (15 insulators) & steel frame with operating mechanism & operating rod of GI pipe 25mm medium grade with necessary clamps to be operated from ground level 11 KV grade working pressures and current upto 400 amps etc complete, all as specified and directed.

Supplying and laying synthetic Rubber insulated mats 2.5 mm thick for voltage upto 11 KV for electrical purpose as per IS 15652-2006, (superseding IS 5424) suitable for electrical shock safety of sizes 2m x 1m.

S & F stay assembly complete comprising of 20mm dia, 40cm long stay bow rod 16mm dia x 1.8 Mtr long galvanised stay rod threaded and with nuts including 300mm x 300mm x 6mm thick plate GI, stay wire, stay clamps and necessary clamps for any type of pole etc as shown on plate No. 1 on page 495 of SSR Part-I, 2009 complete including taking down U/S stay assembly all as specified and directed ( Note : Loop type insulator, excavation and concrete work shall be measured and paid separately).

S & F loop type insulator with complete fitting porcelain, vitreous white or brown large size with over all dismensions 90x140mm , clearance of hole 25.5mm all as specified and directed

S & F galvanised steel stranded stay wire size 7/3.15mm for stay assembly complete all as specified and directed.

Supply, install, testing and commissioning distribution transformer of capacity 200 KVA step down, outdoor type level 3 complete with standard fittings, HT 11 KV 3 phase, LT 433 volts, 3 phase 4 wire with off load tappings on HT side to vary secondary voltage, all as per IS:1180-2014 with latest amendmets including comprising of following (a) No load voltage ratio 11 KV/433V (b) Vector Group DYN 11 (c) double copper wound (d) temperature rise 45/50 degree centigrade (oil/winding) (e) tap changer on HT side with + 7.5% in steps of 2.5% each (f) cable end box on HT and LT side to accommodate cables (g) conservator with drain valve (h) explosion vent with diaphram and sighting glass (j) air release plug (k) earthing terminals 02 Nos for body and 02 Nos for neutral (l) lifting lugs (m) flanged rollers (n) silica gel breather with transparent body and oil seal (o) radiator with top and bottom shut off brass gate valves (p) brass/ gun metal drain valve (q) first filling of transformer oil (r) cooling ONAN (s) inspection cover (t) danger notice board (u) cable entry box complete with all necessary control cables, necessary civil works for making foundation for transformer mounting etc complete all as specified and as directedcomplete all as specified and directed.

Supply and fixing lightening arrestors expulsion type complete with all fittings transmission class discharge capacity 65 KA ,11 KV all as specified and directed.

M & L for 3 core (flexible) PVC insulated unsheathed 1.5Sqmm copper cable for connection to security light from junction box incl rigid metallic pipe 20 mm duly fixed with poles using MS clamps - 03 Nos complete all as specified and directed by Engr-in-Charge.

M&L for street light bracket made out of GI pipe 40 mm bore medium grade 1.5 m long bend to shape required fixed to pole/wall with MS clamps made out of 40x3 mm, 50 cm long incl nuts and bolts of required size complete all as specified and directed.

S & F 35 Watt LED fitting energy saving and environmental friendly long life LED street light fitting made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP66 protection and impact resistance of IK07 complete including 2 RM, 2 core, 1.5 Sqmm copper wire for each light fitting etc complete all as specified and directed.

S&F junction box of minimum size 30cm (height) x 20cm (width) x 15cm (depth) made of steel sheet 1.6 mm thick duly painted with two coat of synthetic enamel paint over a coat of red oxide primer having aluminium bus bar 2 Nos of capacity 63 Amps with minimum 02 Set of nuts, bolts & washers on each busbar mounted on porcelain/PVC insulator having 01 No MCB, SP, 6 Amps. Junction box shall be fixed on perimeter wall & including suitable anchor fastner, nuts, bolts & washers suitable for bottom entry of cable of size upto 25 sqmm including making electrical connection with & including suitable cable glands, thimbles complete all as specified.

S & F 70 Watt LED fitting energy saving and environmental friendly long life LED street light fitting made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP66 protection and impact resistance of IK07 complete including 2 RM, 2 core, 1.5 Sqmm copper wire for each light fitting etc complete all as specified and directed.

S&F junction box of minimum size 30cm (height) x 20cm (width) x 15cm (depth) made of steel sheet 1.6 mm thick duly painted with two coat of synthetic enamel paint over a coat of red oxide primer having aluminium bus bar 4 Nos of capacity 100 Amps with minimum 04 Set of nuts, bolts & washers on each busbar mounted on porcelain/PVC insulator having 01 No MCB, SP, 16 Amps. Junction box shall be fixed on perimeter wall & including suitable anchor fastner, nuts, bolts & washers suitable for bottom entry of cable of size upto 25 sqmm including making electrical connection with & including suitable cable glands, thimbles complete all as specified.

Supply, fix and commissioning factory made astronomical street light panel, 3 phase, 415 volt, 50 Hz, outdoor type range upto 6 KW conforms to IS/IEC 60947-4-1, IP 54 including contactor 32A TP and MCB 40 Amp TPN, inbuilt short circuit protection, all connections are pre-wired using FRLS copper cable of suitable size complete all as specified

M & L for construction of platform of size 3000 x 2500 x 1200 mm for transformer with PCC (1:4:8) in foundation and PCC 1:2:4 type B1, 100 mm thickness at top portion of platform , brick work with cement mortar (1:4) and complete plaster work of 15 mm thick to exposed surface in CM (1:4) including necessary MS work ( i.e. MS jali/fencing/MS angle ) on the top of platform around transformer up to height 90 cm and one coat of white wash on plastered surface complete all as shown on drawing No CEPZ/C-TD/002/13 Dated 2/5 and all as specified .

M&L for earthing complete with galvanized steel earth plate electrode 600x600x6mm thickness not less than 6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below the normal ground level ) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized iron strip 32x6mm by means of nuts bolts,washers,check nuts of GI steel all as shown in electric plate no 5 all as specified and indicated complete and including charcoal dust,salt etc and GI protection pipe ,medium grade 40mm and GI watering pipe 20mm ,medium grade with funnel and wire mesh ,40mm thick pre-cast RCC N-15 (nominal mix) cover reinforced with XPM weight not less than 4 kg /sqm with suitable handle of 6mm dia MS bar and angle iron 40x40x3mm frame for cover ,PCC M-15 (nominal Mix) pit,excavation and earth work in any type of soil and connected all as specified and as directed.

M&L for earthing complete with galvanized steel earth plate electrode 600x600x6mm thickness not less than 6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below the normal ground level ) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized iron wire 4mm by means of nuts bolts,washers,check nuts of GI steel all as shown in electric plate No 5 all as specified and indicated complete and including charcoal dust,salt etc and GI protection pipe ,medium grade 40mm and GI watering pipe 20mm ,medium grade with funnel and wire mesh ,15mm thick pre-cast RCC N-15 (nominal mix) cover reinforced with XPM weight not less than 4 kg /sqm with suitable handle of 6mm dia MS bar and angle iron 40x40x3mm frame for cover ,PCC M-15 (nominal Mix) pit,excavation and earth work in any type of soil and connected all as specified and as directed.

Material and labour for sub class 'B' bricks well burnt of size laid dry flat for protection of cable complete all as specified and directed.

Chandra Construction

A.V BUILDERS

mohan lal gupta sons

SAR AGENCIES

M/S BHATIA BUILDERS AND CONTRACTORS

MS SHRI B.C. DAS

imran construction company