REPAIR / MAINTENANCE OF CEILING FAN, EXHAUST FAN, WALL MOUNTED FANS MCB DBS, SUB MAIN WIRING, STAIR CASE LIGHT, EARTHING, WALL MOUNTED CONTROL PANEL, METER BOX AND OTHER MISC E/M WORKS IN CERTAIN MARRIED AND OTM ACCNS AT AF-I UNDER GE AF JAMNAGAR NO2

Amount

Taking down carefully ceiling fan / exhaust fan / cabin fan / wall mounted fan by disconnecting electric connection for carrying out repairing such as rewinding, replacement of defective spare part, over hauling and painting etc as required and re-fixing in the same position after carry out the repairs works, and connecting complete all as specified and directed. Note: Repairing such as rewinding, replacement of defective spare part, connecting wire, Over hauling and painting etc will be measured & paid separately under subsequent items.

M & L for rewinding of ceiling fan of any make by dismantling the ceiling fan,removing shaft, bearing and bushing, removing the burnt copper winding from the slots, cleaning slot, replacement of defective nut bolts washer etc and rewinding of fan motor using appropriate gauge/size super enameled copper winding wire thermal class-E, including varnishing and reassembling. Providing three core copper cable PVC insulated multistranded 0.5mm 30cm length for connection of fan from ceiling rose and testing of fan complete all as specified and directed. Rewinding should be carried out for the following size of ceiling fan:-

(a) 1200mm sweep

(b) 1400 mm sweep

M & L for rewinding of exhaust fan motor of any make by dismantling the exhaust fan, removing shaft, bearing and bushing, removing the burnt copper winding from the slots, cleaning slot, replacement of defective nut bolts washer etc and rewinding of fan motor using appropriate gauge/size super enameled copper winding wire thermal class-E, including varnishing, applying cotton tape and reassembling complete. Providing twin core copper cable 30cm length for connection and testing of fan complete all as specified and directed. Rewinding should be carried out for the following size of exhaust fan :-

(a) 450mm sweep

(b) 300mm sweep

(c) 200mm sweep

M & L for rewinding of Pedestal fan motor of any make by dismantling the Pedestal fan, removing shaft, bearing and bushing, removing the burnt copper winding from the slots, cleaning slot, replacement of defective nut bolts washer etc and rewinding of fan motor using appropriate gauge/size super enameled copper winding wire thermal class-E, including varnishing, applying cotton tape and reassembling complete. Testing of fan should be carried out to entire satisfaction of Engr-in-charge. The size of pedestal fan for rewinding shall be as under:-

(a) 300 mm sweep.

(b) 450 mm sweep.

(c) 600 mm sweep.

All as per item No 4 above but wall mounted fan / Air circulators of size 450 mm sweep.

All as per item No 4 above but wall mounted fan / Air circulators of size 600 mm sweep.

Supply and fix in repair ball bearing of any size suitable for ceiling fan 1200 mm / 1400 mm sweep complete all as specified and directed. Make:- SKF/NBC/FAG

Supply and fix in repair Gun metal bush of any size suitable for ceiling fan of 1200 / 1400 mm sweep complete all as specified and directed.

Supply and fix in repair Gun metal bush of any size suitable for exhaust fan 300 / 450mm sweep complete all as specified and directed.

Supply and fix in repair capacitor 2.5 MFD AC 230 Volt 50 HZ, for ceiling fans complete all as specified and directed. Make: FALCON / EPCOS / TIBCON

Supply and fix in repair capacitor 4 MFD AC 230 Volt 50 HZ, of exhaust / bracket fan any size complete all as specified and directed. Make: FALCON / EPCOS / TIBCON

Supply and fix in repair capacitor 3.15 MFD AC 230 Volt 50 HZ, of exhaust / bracket fan any size complete all as specified and directed. Make: FALCON / EPCOS / TIBCON

Supply and fix in repair capacitor 5 MFD AC 230 Volt 50 HZ, of exhaust / bracket fan any size complete all as specified and directed. Make: FALCON / EPCOS / TIBCON

Supply and fix in repair bolt, nuts, washer and split pin for the down rod of ceiling fan complete all as specified and directed.

Supply and connection in repair PVC insulated, PVC sheathed three core copper conductor cable multi stranded of size 0.5 Sqmm for connecting of fan from ceiling rose complete all as specified and directed. Make: Finolx / Havells / RR Kabels.

Material and labour for painting of ceiling fan including blades by scrapping of old paint ,filling of cavities formed,preparation / cleaning of surface, making surface smooth and spray painting with one coat of white synthetic enameled paint of superior quality and writing MES / SM No with appropriate size letters using black paint complete all as specified and directed.

Material and labour for painting of exhaust fan including blades by scrapping of old paint ,filling of cavities formed,preparation / cleaning of surface, making surface smooth and spray painting with one coat of white synthetic enameled paint of superior quality and writing MES /SM No with appropriate size letters using black paint complete all as specified and directed.

Assembling & fixing only ceiling fan of various sizes complete with blades, down rod canopy etc including hanging in position and connecting complete all as specified and directed.

Assembling & fixing only exhaust fan of various sizes complete with blades, fixing with 4 nos hold fastener nut and bolt with washer and connecting with flexible PVC insulated multistranded copper conductor cable of size 0.75 sqmm from ceiling rose to exhaust fan complete all as specified and directed.

Supply and fix of Fan clamp and rubber bush including nut , bolts, washers and split pin for hanging of ceiling fans complete all as specified and directed.

Supply and fixing ceiling fan MS clamp including nut, bolts and washers for various shapes and sizes for fixing of MS channel / pipe / angle complete all as specified and directed.

Supply and fix of Fan Rod of size 300mm long for ceiling fans complete all as specified and directed.

Supply and fix of Fan Rod of size 450mm long for ceiling fans complete all as specified and directed.

Supply and fix of Fan Rod of size 600mm long for ceiling fans complete all as specified and directed.

Supply and fix of Fan Rod of size 1050mm long for ceiling fans complete all as specified and directed.

Supply and fix Plastic louvers for Exhaust fan along with connected accessories for 200 mm and 300 mm dia sweep exhaust fan complete all as specified and directed.

S&F in repair poly propylene plastic louver shutter (flap type) of size 350 mm x 350 mm, circulating opening 310 mm dia, fixed on wall for exhaust fan with screw complete all as specified and directed. Make: OMAX plastic / Sintex or equivalent make approved by the GE.

Supply and fix in repair stepped type electronic fan Regulator switch type on the existing phenolic laminated sheet etc complete all as specified and directed. Make : Anchor / Kolors / Crabtree / SSK

S&F for Modular step type fan regulator 100 watt 2 module, complete all as specified and directed. Make :- Legrand / Anchor (Penta / Wood / Roma) / Havells (Crabtree)

Supply and fix of PCB Board for BlDC Ceiling Fan, 1200 mm sweep, 350 RPM ,32 watts suitable for make Hector 500, I-FALCON, complete all as specified and directed.

Supply and fix of Starter and Rotar with full assembly for BLDC ceiling Fan alongwith magnet ring, nut, bolt, washer etc suitable for make Hector 500,I-FALCON, complete all as specified and directed.

Supply and fix PVC body assembly for exhaust fan suitable for 200/250/300 mm, complete all as specified and directed.

Supply and fix of exhaust fan motor suitable for 200/250/300 mm PVC body, complete all as specified and directed.

Supply and fixing fan blade for 1200/1400mm sweep ceiling fans suitable for existing fans complete all as specified and directed.

Supply and fixing fan blade for 300/380/450mm sweep exhaust fans suitable for existing make as per site complete all as specified and directed.

Supply and fixing iron Frame,Legs, rubber bush, nuts & bolts suitable for 300/380/450mm sweep exhaust fans for existing model as per site complete all as specified and directed.

Taking down carefully (copper/aluminum) unsv point wiring complete of any type (batten/surface conduit or concealed) for light point, fan point, bell point, socket point or power point including fixture and fitting such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions seperately) and making good the disturbed surfaces of wall/floor or ceiling to match with existing surface and finishing the surfaces with distemper/white washing/colour washing as per existing complete all as specified and directed.

Taking down carefully by unscrewing from fitting and fixtures such as switch boards/cut out boxes/MCB DBs, ceiling fittings,bulk head fittings, tube light fittings, street light, flood LED lights etc complete all as specified and directed.

Point wiring with PVC insulated and unsheathed multistranded FRLS copper conductor single core 1.5sqmm (nominal area) cable using approved colour code as per IS drawing in and incl PVC casing and capping with all accessories suitable for modular type fitment including provision for fixing of modular flush boxes of suitable size complete alongwith copper earth wire PVC insulated & unsheathed multistranded(FRLS) copper conductor cable of size 1.5sqmm as continous earth wire connected to common earth and erth dolly complete all as specified and making good disturbed surfaces of wall, floor or ceiling with plaster and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as specified and directed.

(a)One 3 pin 5 Amp socket out let controlled by one switch on independent board

(b) One light point controlled by two 2-way switch with cable 1.5 sqmm

Point wiring for power point with PVC insulated and unsheathed multistranded FRLS copper conductor single core 2.5sqmm (nominal area) cable using approved colour code as per IS drawing in and incl PVC casing and capping with all accessories suitable for modular type fitment including provision of modular flush boxes of suitable size and thickness as per IS complete alongwith copper earth wire PVC insulated & unsheathed multistranded(FRLS) copper conductor cable of size 2.5 sqmm as continous earth wire connected to common earth and erth dolly complete all as specified and making good disturbed surfaces of wall, floor or ceiling with plaster and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as specified and directed.

M & L for module cover plate with frame as per site requirement for following module:- Make : Legrand/C&S Electric/Havells

(a) 1 module

(b) 2 module

(d) 3 module

(e) 4 module

(f) 6 Module

(f) 8 module

M & L for Modular metal Flush box as per site requirement. Make : Legrand/C&S Electric/Havells

(a) 1/2 module

(b) 3 module

(b) 4 module

(d) 6/8 module

M & L for modular switch 1 way 6 Amp 1 Module complete all as specified and directed. Make :- Legrand / Kolors (Krest-white) / Crabtree

M & L for Modular switch 2 way 6A, 1 Module complete all as specified and directed. Make :- Legrand / Kolors (Krest-white) / Crabtree

M & L for Modular Switch 1 way 16/20 Amp 1 Module, complete all as specified and directed. Make :- Legrand / Kolors (Krest-white) / Crabtree

M &L for Modular Socket 6A 2/3 Pin universal 2 module, complete all as specified and directed. Make :- Legrand / Kolors (Krest-white) / Crabtree

M &L for Modular Socket 16A/ 6A 2/3 Pin combined 2 module, complete all as specified and directed. Make :- Legrand / Kolors (Krest - white) / Crabtree

Supply and fix in repair of in repair LED lamp 9 watt cap complete all as specified and directed. Make :- Wipro / Tejas / Phillips

Supply and fix in repair 35W LED building security light luminaire complete with pressure die cast aluminium housing and prismatic poly carbonate cover to ensure better uniformity of light distribution fixed on bldg wall surface including provision of GI pipe bracket complete with clamps, nuts, bolts and washers and making good the disturbed surface of wall complete all as specified and directed.

Taking down carefully (copper/aluminium) submain wiring complete of any type (batten/surface conduit or concealed) for socket point or power point complete with all fittings such as swiches sockets pendants etc complete and making good distuebed surface of wall,floor or ceiling with plaster of tiles or roof treatment etc and finishing the surface with distemper white washing/co0lour washing to match with the existing surface complete all as specified and directed.

M&L Sub main wiring using PVC insulated and unsheathed multistranded FRLS copper conductor cable using approved colour code as per IS drawing in and incl PVC casing and capping with all accessories and making good disturbed surfaces of wall, floor or ceiling with plaster and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as specified and directed of the following sizes of cables:-

Using two single core PVC insulated FRLS cable 2.5 sqmm copper conductor multi stranded and 2.5 sqmm copper conductor insulated cable using as earth wire Note :2 runs of 2.5sqmm copper cable & 1 run of 2.5 sqmm copper cable in and including 20mm PVC conduit shall be measured as one unit

Using two single core PVC insulated FRLS cable 4 sqmm copper conductor multi stranded and 4.0 sqmm copper conductor insulated cable using as earth wire Note :2 runs of 4sqmm copper cable & 1 run of 4.0 sqmm copper cable in and including 20mm PVC casing caping shall be measured as one unit

Using two single core PVC insulated FRLS cable 6 sqmm copper conductor multi stranded and 6.0 sqmm copper conductor insulated cable using as earth wire Note :2runs of 6sqmm copper cable & 1 run of 6.0 sqmm copper cable in and including 25mm PVC conduit shall be measured as one unit

Using two single core PVC insulated FRLS cable 10 sqmm copper conductor multi stranded and10.0 sqmm copper conductor insulated cable using as earth wire Note :2 runs of 10sqmm copper cable & 1 run of 10.0 sqmm copper cable in and including 25mm PVC conduit shall be measured as one unit

M & L for distribution board (DB), double door (CRCA sheet) dust and vermin proof SPN 8 way with 100 Amps rated copper busbar, neutral bar, earth bar and cable ties for cable management, reversible door for for IP 43, single pole and neutral 250 Volts, flush to wall complete with IP 43 protection complete all as specified and directed. Make : Legrand / L&T (Hager) / Schnieder (Multi-9) / BCH

M & L for distribution board (DB), double door (CRCA sheet) dust and vermin proof SPN 12 way with 100 Amps rated copper busbar, neutral bar, earth bar and cable ties for cable management, reversible door for for IP 43 single pole and neutral 250 Volts, flush to wall complete with IP 43 protection complete all as specified and directed. Make : Legrand / L&T / Schnieder (Multi-9) / BCH

M & L for distribution board (DB), double door (CRCA sheet) dust and vermin proof SPN 4 way with 100 Amps rated copper busbar, neutral bar, earth bar and cable ties for cable management,reversible door for for IP 43, single pole and neutral 250 Volts, flush to wall complete with IP 43 protection complete all as specified and directed. Make : Legrand/L&T/ Schnieder (Multi-9)./BCH

M & L for distribution board (DB), double door type, as per IEC 61439-3 made out of sheet metal enclosure (CRCA sheet) dust and vermin proof MCB DB, TPN 4 way with 250 Amps rated copper busbar, 415 Volts with in built MCCB 160 Amps, 10 KA, 01 No.,2neutral bar and 2 earth bar IP 43 protection,cable ties for cable management(Fully insulated busbar and shrouded neutral bars),reversible door for IP 43 ,flush mounting to wall, including provision of MCB SP 6 to 32 Am,10KA -12 nos complete all as specified and directed. Make : Legrand /L & T (Hager) / Schnieder (Multi-9).

M&L for MCB single pole & neutral 240 volt C curve 10 KA (40 to 63)Amps capacity IP 20 complete all as specified and directed. Make - Legrand/Siemens/ Hager

M&L for MCB triple pole & neutral 415 volt C curve 10 KA, 63Amps capacity IP 20 complete all as specified and directed. Make - Legrand/Siemens/ Hager

M&L for MCB single pole,5 to 30 Amp 240 volt B curve 10 KA, IP 20 complete all as specified and directed. Make - Legrand/Siemens/ Hager

M & L for MCCB TPN 125A, 25KA,415 volts with thermal magnetic release adjustable type - Overload Setting: 0.8-1.0 In-Short Circuit Setting: 6-10 In, complete all as specified and directed. Make : L&T/Legrand/ Schnieder (Multi-9).

M & L for MCCB TPN 160A, 25KA,415 volts with thermal magnetic release adjustable type - Overload Setting: 0.8-1.0 In - Short Circuit Setting: 6-10 In, complete all as specified and directed. Make : L&T/Legrand/ Schnieder (Multi-9).

Supply and fix LED decorative post of lantern for 360degree indirect light with IP 65 protection, glare free and better uniformity light, cap 40 Watt fittings including all accessories complete fixing accessories fixed in position complete all as specified and directed. Make:- CG/Philips/wipro

S & F industrial type plug & socket board SP & N enclosure with 2 pole and earth metal plug & socket complete with 10 Amp MCB SP, complete all as specified and directed. Make: Legrand / Havells / Schneider etc

M & L for earthing with SAFE EARTHING ELECTRODE (S.E.E) conforming to IS :3043-1987 with zinc coated earthing electrode with coating thickness of 100 microns using pipe in pipe technology method with 3 Mtr long, 42mm inner dia and 76mm outer dia GI rod connected with and including 25 mm x 3 mm size GI strip upto 7.5 m, fixing of electrode by boring 150 mm dia hole up to 3.30 meter depth in any type of soil with mechanical apparatus, returning filling with back fill compound(BFC) 25*2 KG compound bags including GI tubing 40 mm dia with necessary fittings light grade as protection to GI strip complete with FRP earthing protection chamber along of size 420 mm x 420 mm at top, 340 mm x 340 mm at bottom, height 210 mm with FRP chamber cover and including FRP Earthing result display board of size 254 mm x 380 mm made out of plastic material showing the information replated to type of earthing, earthing result, due date of testing etc along with fixing stand 610 mm height made of angle ironas per manufactures instruction and complete all as specified and directed. Make:- POWERTRAC McML Earthing solution / Ashlock

S&F in repairs pole mounted junction box ( Street light boxes) weatherproof cabinets IP -65-IK-09 class II with removable chasis and faceplates,lockable door handle, sealable cover , self extinguishing conforms to EN 60439-3 ,for single phase lighting system, suitable for 6 module with 1 row complete all as specified and directed. Make: Legrand/Hensel/L&T

S & F in repairs contactor 25A 2NO , suitable for 230V AC complete all as specified and as directed. Make: Legrand/Hensel/L&T

S & F in repairs MCB DP 32A DX3 DP , suitable for 230V AC complete all as specified and as directed. Make: Legrand /Hensel/L&T

Supply, fix in repair digital weekly timer Switch of supply voltage 240vAC, 50/60 HZ. Make :- Legrand/ Hensel/L&T

S & F in repair LED round spot light 3 W capacity , CCT :- 3000 K, working voltage level 220V-240V Make : Philips / Wipro, CG

S & F in repair LED round spot light 2 W capacity , CCT :- 3000 K, working voltage level 220V-240V, Make : Philips Product code :-919215850711or equivalent in Wipro, CG

S & F Bulkhead fitting 10 watt die cast aluminium housing with complete assembly and PC opal diffuser IP 65 rated dust and water resistant complete all as specified and as directed . Make: Wipro /Philips/Syska

Supply and fixing in repair recess mounted LED luminaire with full diffuser 36 watt of 2x2 grid for new age work space, powder coated luminaire with minimum 100lm/watt efficiency,25000 to 50000 working hours and 6500CCT complete all as as specified and directed by Engr-in-Charge.Make: Wipro/Philips/Syska.

Supply and fix in repair round recess mounted LED luminaire with full diffuser 15/16 watt suitable for opearting voltage 220-240VAC and inbuilt driver, powder coated luminaire with minimum 100lm/watt efficacy ,25000 to 50000 working hours and 6500CCT complete all as specifed and as directed by Engr-in-charge. Make: Wipro / Philips/Syska

Supply and fix in repair recess mounted LED slim downlight square luminaire with full diffuser 18 watt suitable for opearting voltage 220-240VAC and inbuilt driver, powder coated luminaire with minimum 100lm/watt efficacy ,25000 to 50000 working hours and 6000CCT complete all as specifed and as directed by Engr-in-charge. Make: Wipro / Philips/Syska

Supply and fix in repair round recess mounted LED slim luminaire with full diffuser 24 watt suitable for opearting voltage 220-240VAC and inbuilt driver, powder coated luminaire with minimum 100lm/watt efficacy ,25000 to 50000 working hours and 6000CCT complete all as specifed and as directed by Engr-in-charge. Make: Wipro / Philips/Syska

Supply and fix in repair LED power supply driver suitable for Primary:220-240 VAC , 50/60Hz suiatble for 40watt post top fitting Secondary: constant current DC:300mA with thermal,overload and short circuit protection complete all as specified and as directed by Engr-in-Charge.

Supply and fix in repair LED Reading light 3watt suitable for 220 -240volts, 50hz supply dust and water resistant ,minimum 100lm/watt efficacy ,25000 to 50000 working hours and minimum 5000 to 5700CCT complete all as specifed and as directed by Engr-in-charge. Make:Philips/Wipro/Syska

S&F energy efficient LED tube light fitting integrated batten type with built in LED Chip & integral LED driver 20 watt, channel housing & diffuser of length 1200 mm (approx.) with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified and directed. Make -Wipro/Philips/ Crompton/HAVELLS

S&F energy efficient LED tube light fitting integrated batten type with built in LED Chip & integral LED driver 10 watt, channel housing & diffuser of length 600mm (approx) with all accessories, fixing arrangement internally pre-wired fixed in position & connecting complete all as specified and directed. Make: Wipro/Philips/ Crompton/HAVELLS

Supply and fix in repair Pressure boosting system 1.0 HP cap, 220 Volt supply , suc & del pipe 25 x 25 mm size , Make :- Crompton/Kirloskar/Jaquor.

M&L for repairing / servicing the pressure pump set of capacity 0.5 to 1 HP by dismantling the pump and motor, over hauling of pump by replacing the complete worn out parts such as cast iron impeller ,bearing , water seal, repairing the shaft by machining, welding, grinding, polishing etc, including servicing of electric motor suitable capacity with replacement of worn out bearing for driven and non driven ends, reassembling the pump and motor after complete servicing and repair and testing on load complete all as specified and directed.

M&L for dismantling of existing defective Pressure pump motor of capacity 0.5 to 1 HP, single phase, 230 V, 50 Hz, from the foundation, disconnecting the electric connection, coupling pulley, cutting down and removing existing burnt out copper windings, cleaning of slots and rewinding with super enamelled solid copper conductor (winding wire) of suitable gauge and size complete including varnishing, drying, ovening, overhauling, greasing and fixing in the same position, making necessary electric connection and testing of Pressure pump motor complete all as specified and directed. Note:-(i) For rectification of pumps and motors if any spares, Pressure switch, Pressure tank,sensor, non return valve, controller etc required to be replaced the same shall be measured and paid seperately under "supply and fixing" items.

Supply and fixing of Pressure Switch. Make: As per site requirement.

Supply and fixing of 24 Liter Hydro Pneumatic Pressure Tank/Pressure Pump Vessel/Pressure Pump & Booster Pump Tank suitable for brands pump Make: As per site requirement.

Supply and fixing of Brass Non Return Valve 1". Make: As per site requirement.

Supply and fixing of Automatic Electronic Switch Control Water Pump Pressure Controller. Make: As per site requirement.

Supply and fixing of 5 way tee brass. Make: As per site requirement.

Supply and fix LED decorative post of lantern 45 Watt fittings including all accessories completefixing accessories and clamp including 4 metre height black painted glavanized pole, fixed in position including necessary PCC work and execavation as per manufactuer's instruction complete all as specified and directed.

Supply and fixing LED under water fountain light 6 watt RGB, compact and robust design with diecast aluminium housing and stainless trim IP 68/IK10 protection including suitable size driver mechanism and accessories complete with fixing arrangemet provision of wire 3 core 2.5 sqmm copper conductor from fitting to connection point incl taking down old unsv light fitting complete all as specified and directed.

M/s Bombay Novelty Stores

Vijay Construction Co

EVEREST BUILDERS

Nitesh Enterprise

ASCENT ELECTRIFICATION ENGINEERS

M/S Rajendra Constructions

ALBA AC AND REF SERVICES

JAMNAGAR ELECTRIC AND MACHINERY CO