Construction of First floor on existing sub division office building for Khargate sub division at P H Campus, Bhavnagar Circle.

Name of Work : Construction of First floor on existing sub division office building for

Khargate sub division at P H Campus, Bhavnagar Circle

Sr PARTCULARS OF ITEM

QTY RATE PER AMOUNT

Excavation for foundation up to 1.5 M. depth.

Incl. sorting out and stacking of useful

materials and disposing of the excavated stuff

up to 50 meter. Lead in-

1 (A)- Loose or soft soil 20.00 124.61 Cmt

2 (B)- Dense or Hard Soil 29.00 159.30 Cmt

3 (C)- Hard murrum 29.00 272.60 Cmt

Excavation for foundation for depth from

Mt to 3 Mt. depth including sorting out and

stacking of useful materials and disposing of

the excavated stuff upto 50Mt. Lead in-

4 (C)- Hard murrum 10.00 291.14 Cmt

5 (D)- Soft rock not requiring Blasting 10.00 304.12 Cmt

6 Uncoursed Rubble Masonry with hard stone of

approved quality in foundations and plinth in

Cement Mortar 1:6 (1-cement : 6-coarse sand

including levelling up etc. complete (for

increasing the load bearing capacity of soil

7 Filling available excavated earth (excluding

rock) trenches, plinth side of foundation etc. in

layer not exceeding in 20 cm. in depth 77.00 136.11 Cmt

consolidating each deposited layer by ramming

8 Filling in foundation and plinth with murrum

or selected soil brought from out side with any

lead in layers of 20 cm. Thickness including 56.00 301.58 Cmt

watering, pnumatic ramming and consolidating

9 Filling in plinth with sand under floor

including watering, ramming, consolidating 8.00 484.44 Cmt

and dressing etc. completed.

10 Applying general insecticide pest control

treatment to floors, cupboards etc including

labour material etc. complete. Using

Heptachloride 20 EC. As Per 6113_pests

Consentration Weight 0.50 percent is

recommended one litre chemical emulsion 59.00 39.62 Smt

dillute with 39 liter of water will give. Total

dillute concrentration will be 40 litre inclusive

of one litre chemical emulsion appication

Litre chemical / Sqm of surface is

recommended as per I.S

Sr PARTCULARS OF ITEM

QTY RATE PER AMOUNT

11 Providing and laying cement concrete 1:3:6 (1

CEMENT: 3-Coarse sand: 6 - Hand broken

stone aggregate 40MM nominal Size) and 39.00 3075.91 Cmt

curing complete excluding the cost of

formwork in.- Foundations and plinth.

12 Providing and laying cement concrete M-150

(1cement : 2coarse sand : 4 graded stone

aggregate 20 mm. Nominal size) and curing

complete excluding cost of form work in (A) -

foundation footings, Base of Columns and

13 Providing and laying controlled cement

concrete M 250 and curing complete including

the cost of form work and excluding

reinforcement for reinforced complete work

in(A)- foundation footings, Base of Columns

and mass concrete

14 Constructing 125 mm thick Controlled cement

concrete M- 200 Grade with Trimix Vacumm

dewatering system with power trowling sheet

form work with M.S. channels, srinking of fair

hardness, Non oxidzing, Non metalic, heavy

duty floor hardner of FOSROC or equivalent at

the rate of 0.5 Kg./Sq.M. with 10 mm x

mm size groove cutting in concrete as

constructution joint with necessary equipments,

labors as per design etc. Complete.

15 Providing and laying controlled cement

concrete M.250 and curing complete including

the cost of formwork and excluding the cost

of reinforcement for reinforced concrete work

in (C) Landing, shelves, Balconies, Lintels,

Beams, Girders upto floor two Level - GF

16 Providing and laying controlled cement

concrete M.250 and curing complete including

the cost of formwork and excluding the cost

of reinforcement for reinforced concrete work

in (C) landing, shelves, Balconies, Lintels,

Beams, Girders upto floor two Level-FF

17 Providing and laying controlled cement

concrete M.250 and curing complete including

the cost of formwork and excluding the cost 8.00 6731.22 Cmt

of reinforcement for reinforced concrete work

in (E) Slabs upto floor two level - GF

18 Providing and laying controlled cement

concrete M.250 and curing complete including

the cost of formwork and excluding the cost 40.00 6772.58 Cmt

of reinforcement for reinforced concrete work

in (E) Slabs upto floor two level-FF level

Sr PARTCULARS OF ITEM

QTY RATE PER AMOUNT

19 Providing and laying controlled cement

concrete M.250 and curing complete including

the cost of formwork and excluding the cost

of reinforcement for reinforced concrete work

in (D) Columns, Pillars posts and struts upto

floor two level - GF.

20 Providing and laying controlled cement

concrete M.250 and curing complete including

the cost of formwork and excluding the cost

of reinforcement for reinforced concrete work

in (D) Columns, Pillars posts and struts upto

floor two level.-FF level

21 Providing TMT Bar FE 500D reinforcement

for R.C.C. work including bending, binding

and placing in position complete upto floor two

22 Providing TMT Bar FE 500D reinforcement

for R.C.C. work including bending, binding

and placing in position complete upto floor two

level.-FF level

23 Brick work using common burnt clay building

bricks having crushing strength not less than

kg./Sq.Cm. in foundation and plinth in Cement 8.00 4268.05 Cmt

Mortar 1:5. (1- Cement : 5 -fine sand)

(B)Conventional.

24 Brickwork using common burnt bricks having

crushing strength not less than 35 kg./Sq.Cm.

in Super Structure up to floor two level. in 35.00 4553.62 Cmt

Cement Mortar 1:5 (1- Cement : 5 -fine sand)

Conventional. GF.

25 Brickwork using common burnt bricks having

crushing strength not less than 35 kg./Sq.Cm.

in Super Structure above floor two level. in 94.00 4596.28 Cmt

Cement Mortar 1:5 (1- Cement : 5 -fine sand)

Conventional. - FF

26 Half Brick masonary in common burnt

building bricks having crushing strength not

less than 35 Kg. / Sqmt. in cement mortar 1:4 13.00 689.60 Smt

(1-Cement : 4-Coarse Sand) in superstructure -

upto floor two level - GF

27 Half Brick masonary in common burnt

building bricks having crushing strength not

less than 35 Kg. / Sqmt. in cement mortar 1:4 85.00 695.94 Smt

(1-Cement : 4-Coarse Sand) in superstructure

above floor two level - FF

28 Providing 15 mm. Thick cement plaster in

single coat on both sides Brick/concrete walls

for interior plastering up to floor two level and 140.00 198.10 Smt

finished even and smooth in (i) C.M.1:3

(1cement : 3 sand)- For walls

Sr PARTCULARS OF ITEM

QTY RATE PER AMOUNT

29 Providing 15 mm. Thick cement plaster in

single coat on both sides Brick/concrete walls

for interior plastering Above floor two level 680.00 222.32 Smt

and finished even and smooth in (i) C.M.1:3

(1cement : 3 sand)- For walls-FF

30 Providing 10 mm. Thick cement plaster in

single coat on both sides Brick/concrete walls

for interior plastering up to floor two level and 50.00 174.05 Smt

finished even and smooth in (i) C.M.1:3

(1cement : 3 sand)- For Celling - GF

31 Providing 10 mm. Thick cement plaster in

single coat on both sides Brick/concrete walls

for interior plastering above floor two level and 270.00 198.27 Smt

finished even and smooth in (i) C.M.1:3

(1cement : 3 sand)- For Celling-FF

32 20 mm. Thick sand faced cement plaster on

walls up to height 10 meters above ground

level consisting of 12 mm. Thick backing coat

of C.M. 1:3 (1 cement : 3 sand) and 8 mm.

Thick finishing coat of C.M.. 1:1 (1 cement :

sand) etc. complete.

33 Providing cement vata 10 x10 cm size quarter

round in cement concrete in C.M. 1:1 including 60.00 24.04 Rmt

neat cement finishing watering etc. complete.

34 Providing and laying Broken China Mosaic

flooring for terrace using 12 mm to 20mm

broken pieces of glazed tiles to be laid over

cement mortrar 1:3 to plain or slope and to be

tampred to bring mortar creme out up to 386.00 771.98 Smt

surface using white cement including rounding

off junctions and extending them up to 15cm

along the wall, clearing with water and oxalic

acid etc. as directed.

35 Providing and laying 24" x 24" Vitrified 8mm

thick tiles flooring over 20mm (Average) base

of Cement Mortar 1:6 (1-Cement : 6 Coarse

Sand) on new surface or fixing on existing

flooring by adhesive materials including 310.00 1281.70 Smt

dismentalling of existing flooring and jointed

with colour cement slurry including finished

with flush pointing & cleaning the surface etc.

complete for Light Shade.

36 Providing and laying coloured glazed tiles of

the size 300mm x 200mm x 8mm / 300mm x

450mm x 8mm in floring, skirting, risers of

steps and dedo on 10mm thick cement plaster

1:3 (1-Cement : 3-Coarse sand) & jointed with

white cement slurry.

Sr PARTCULARS OF ITEM

QTY RATE PER AMOUNT

37 Providing and laying polished kotah stone slab

Flooring over 20 mm (Average ) thick bases of

cement mortar 1:6 (1- cement : 6 coarse sand )

or LM 1:1:5 (1 lime putty : 1.5 coarse sand )

laid over and jointed with grey cement Slurry

mixed with pigment to match the shade of slab

including rubbing and polishing etc. completed

38 Providing and laying kotah stone slab 25 mm

thick in riser of steps, dedo and pillars laid on

10mm thock cement mortar 1:3(1- cement :

3coarse sand ) and jointed with grey cement 6.00 1124.24 Smt

Slurry mixed with pigment to match the shade

of slab including rubbing and polishing etc.

completed, kotastone-25mm thick

39 Providing & laying 20 to 25mm thick, both

faces polished kotah stone with all edges

machine cut up to 450/600mm width and of

required length (only one piece to be used ) of

approved quality for cupboard shelves

including fixing the same in masonry wall

by cement mortar in three sides including

curing etc. complete as directed by E.I.C

40 Providing and laying Granite stone slab

flooring over 20mm average base of cement

mortar 1:6 (1 cement : 6 coarse sand ) of L.M.

1:1.5 (1 lime putty : 1.5 coarse sand )and laid

and jointed with gray cement slurry or laying in

sill jamb including fixing with bonding

chemical with rubbing and poishing complete.

(b) Granite stone 18mm thick 1 side polished

41 Providing and fixing fully glazed/partly glazed

Single door shutter made, frame of

10.15cmX4.45cm aluminum section, and

Shutter-Top & vertical section of

8.5cmX4.45cm size and bottom section of

11.40X4.45cm size, using 5mm thick

"TRIVENI" or HB4 plain glass glazing deep 16.00 4080.00 Smt

rubber gasket with locking arrangement, all

fixtures & fastening of anodized section with

all labours & materials etc. complete as per

drawing & as directed by EIC Complete as per

drawing and as directed by E.I.C..

Sr PARTCULARS OF ITEM

QTY RATE PER AMOUNT

42 Providing, & fixing hot pressed phenol bonded,

exterior type solid flush door 30mm shutter

made by approved brand & as per I.S.I.

standard with water resisting plywood facing

and 1mm thick laminated sheet on both side of

door & teak wood leaping all-round including

100X75mm. teak wood frame.If necessary

with glass looking window with T.W. batten

and polishing /Colour. Rates are without 14.00 4460.00 Smt

fixtures & fastening but with 3 NO. of 100mm.

long butt or parliamentary hinges on each flap

of double shutter & 150mm. long hinges for

single shutter and 3 NO. of M.S. flat hold fast

grouted in C.C. (1:2:4) on each side of frame,

coats of oil painting of approved shades make

etc., complete as per drawing & as directed by

43 Providing and fixing FRP frame 100X50 mm

and 28 mm thick FRP depressed pannel shutter

having extra reinforcement on sides and edges

and in Gel coat finish.The core of the shutter &

frame is to be filled up with injected fire

retardent grade polyurethane foam done in situ

along with embedded wooden pieces for

stiffening and also for taking hinges and all 12.00 2354.22 Smt

fixures. The whole FRP Frame and shutter is

to be water proof, weather proof, termite proof

and resistance to mild acid/alkali.Rates are to

be inclusive of S.S. hinges with necessary

screws and allumunium fixtures & fastening &

fastener sleeve.

44 Providing and fixing Window having extruded

Alluminium Colour anodized section frame

main outer size 63.50 x 38.10 x 1.95mm (of

Jindal Section No. 4605, @ Wt.

Kg./Rmt.), horizontal two track member size

61.85mm x 31.75mm x 1.20mm (of Jindal

Section No. 8687 @ Wt. of 0.695 Kg./mt.),

vertical member of size 61.85mm x 31.75mm x

1.30mm (of Jindal Section No. 8758 @ Wt. of

0.659 Kg./mt.) with sliding shutters of

horizontal member size 40mm x 18mm x 22.00 1696.73 Smt

1.29mm (of Jindal Section No. 8949 @ Wt. of

0.456 Kg./mt.), vertical member of size 40mm

x 18mm x 1.29mm (of Jindal Section No.

@ Wt. of 0.456 Kg./mt. / Section 8948 @ Wt.

0.457 Kg./mt) with 5mm thick transparent

bronze colour tinted float glass with powder

coated alluminium fittings and fixtures and

transparent silicon sealant glass fixing to frame

as per detailes etc. complete for Window

Sr PARTCULARS OF ITEM

QTY RATE PER AMOUNT

45 Providing and fixing standared extruded of

alluminium section of size 63mm x 38.10mm x

1.2mm (Jindal Section :2434, @ Wt. 0.643 kg

per mt with colour Powder Coated alluminium

frame for ventilation with 5 mm thick frosted

glass as details etc complete for Ventilation

46 Providing & fixing MS plain grills of required

pattern to frames of windows and gap filling of

wall etc. with MS flats or M.S, pipes at

required spacing and frame all- round square or 550.00 112.68 Kg

round bars with round headed bolts and nuts or

by screws with one coat red oxide & two coat

of oil paint (A) plain grill

47 Steel work, welded in built up sections framed

work including cutting, hoisting, fixing in

position and applying a priming coat of red

lead paint. (A)In beams and joists, channels

angles Tees, flats, with connecting plates or

angle cleats as in main and cross beams. Hip

and jack rafters, purlins conneted to common

rafters and the like

48 Applying two coats of Birla (white cement

based) or Asian (acrylic lapy- putty) or

equivalent & two coats of primer of approved

brand and manufacture on new wall surface to

give an even shade including thoroughly

brushing the surface free from mortar dropping

and other foreign matter and sand papered

49 Wall painting (two coats) with plastic emulsion

paint of approved brand and manufacture on

undecorated wall surface to give an even shade

including throughly brushing the surface free

from mortar droppings and other foreign matter

and sand papered smooth.- in wall

50 Wall painting (two coats) with plastic emulsion

paint of approved brand and manufacture on

undecorated wall surface to give an even shade

including throughly brushing the surface free

from mortar droppings and other foreign matter

and sand papered smooth.- in Ceiling

51 Applying One coat of primer of approved

brand and manufacture on new wall surface to

give an even shade including thoroughly

brushing the surface free from mortar dropping

and other foreign matter and sand papered

52 Finishing Wall with Weather Proof Exterior

Emulsion Paint on Wall Surface (Two Coats)

to give an required shape even shade after

thoroguhly brushing the surface to remove all

dirt, and remains of loose powdered materials

Sr PARTCULARS OF ITEM

QTY RATE PER AMOUNT

53 Providing and fixing of floor spring make

Ozone, Godrej or equivalent heavy duty

including making of cut in flooring of required 5.00 2990.98 Nos.

size and shape inclusive of all labour, tools,

tackles, etc… as directed by EIC

54 Providing erecting and fixing Double coated

ISI water tank of required capacity each with

all necessary fittings and connection etc.

complete on terrace.

55 Providing laying and jointing in true line and

level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as per approved

by Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every two

metre C/C or shall be concelled as directed

including necessary fittings etc. including

testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all

56 Providing laying and jointing in true line and

level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as per approved

by Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every two

metre C/C or shall be concelled as directed

including necessary fittings etc. including

testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all

57 Providing laying and jointing in true line and

level 32mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as per approved

by Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every two

metre C/C or shall be concelled as directed

including necessary fittings etc. including

testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all

58 Providing laying and jointing in true line and

level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as per approved

by Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every two

metre C/C or shall be concelled as directed

including necessary fittings etc. including

testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all

Sr PARTCULARS OF ITEM

QTY RATE PER AMOUNT

59 Providing & fixing to wall, ceilling, and floor

in plumb by means of GI clamps of 18 gauge

sheet with 1 to 1.5 mtrs. Distance 6.00 Kg.

/cm2 working pressure polythene pipes of

approved brand incl. joining with approved

solution & all fittings like bend, tee. Y bend

plug bend with water tight jointsIf pipe laid in

trenchesscope -110 mm Dia.

60 Providing and fixing wash basin with single

hole for pillar tap with providing and fixung

15mmC.P. brass quarter turn pillar tap, capstan

head screw down high pressure with screws,

shanks and back nutswith C.I. or M.S.

Brackets painted white paint including cutting

holes and making good the same including C.P.

brass waste and waste Pipes - vitreous china.-

Flat back washbasin 550 x 400 mm. Size - in

61 Providing & Fixing approved best quality I.S.S

approved heavy PVC Half turn valve 8.00 218.29 Nos.

15mm.dia. Valve.

62 Providing & Fixing approved best quality I.S.S

approved heavy PVC Half turn valve 2.00 491.44 Nos.

25mm.dia. Valve.

63 Providing & Fixing approved best quality I.S.S

approved heavy PVC Half turn valve 2.00 367.70 Nos.

32mm.dia. Valve.

64 Providing & Fixing approved best quality I.S.S

approved heavy PVC Half turn valve 2.00 775.09 Nos.

50mm.dia. Valve.

65 Providing & Fixing colour porcelain lip shaped

wall type URINAL PAN of approved quality &

make including waste coupling bends &

necessary outlet of 25mm.dia. G.I Pipe

connections including providing,flush cock,

P.V.C. connection etc., complete

66 Providing and fixing water closet squatting Pan

(Indian type W.C. Pan) size 580mm

(Earthwork, bed concrete, foot reste and trap to 1.00 1742.75 Nos.

be measured and paid for separately) (A)

Vitreous China.(I) Long pattern White colour

67 Providing and fixing wash down closet

(European W.C. Pan) with integral "P" or "S"

trap and PVC flushing tank cistern with fittings

and incl. plastic seat and cover with brass

hinges and rubber buffersand PVC connector

nozzle etc. including jointing complete.

68 Providing & fixing PVC SWR nahni trap IS

14735 for drain -75mm diameterr with Jali of

the following nominal diameter of self

cleansinf design with CI scread down of higed

grating including the cost of cutting and

making good the walls.

Sr PARTCULARS OF ITEM

QTY RATE PER AMOUNT

69 Providing and fixing screw down quarter turn

bib taps of following size -Brass cromium 7.00 184.98 Nos.

plated screw down bib tap -15 mm dia..

70 P/F brass towel rail complete with C.P. Brass

brackets fixed with C.P. Brass screws.-600 4.00 610.32 Nos.

71 Providing B.B. Masonry inspection chamber

(MANHOLE) of approved size including light

type C.I. Cover with frame, necessary

excavation bottom concreting of .C.C. (1:3:6)

150mm. thick/ 225mm. thick B.B. Masonry in

C.M.(1:6) 12mm thick cement plaster in

C.M.(1:3) inside & to all exposed faces up to

450mm. below ground level, curing etc., 4.00 8187.64 Nos.

450X610 mm including disposal off surplus

excavated earth up to radius of 300 mt.

including 3 coats of white or colour wash to all

exposed finished surface etc. complete as

directed by E.I.C.(B.B.MASONRY UPTO

1000mm. DEPTH.)--450X610 mm clear size

72 Providing B.B. Masonry inspection chamber

(MANHOLE) of approved size including light

type C.I. Cover with frame, necessary

excavation bottom concreting of .C.C. (1:3:6)

150mm. thick/ 225mm. thick B.B. Masonry in

C.M.(1:6) 12mm thick cement plaster in

C.M.(1:3) inside & to all exposed faces up to

300mm. below ground level, curing etc., 3.00 6467.47 Nos.

including disposal off surplus excavated earth

up to radius of 300 mt. including 3 coats of

white or colour wash to all exposed finished

surface etc. complete as directed by E.I.C.,

(B.B.MASONRY UPTO 1000mm. DEPTH.)--

300x300mm clear size

73 Providing & fixing to wall, ceilling, and floor

in plumb by means of GI clamps of 18 gauge

sheet with 1 to 1.5 mtrs. Distance 6.00 Kg.

/cm2 working pressure polythene pipes of

approved brand incl. joining with approved

solution & all fittings like bend, tee. Y bend

plug bend with water tight jointsIf pipe laid in

trenchesscope - 90 mm Dia.

74 Providing & fixing to wall, ceilling, and floor

in plumb by means of GI clamps of 18 gauge

sheet with 1 to 1.5 mtrs. Distance 6.00 Kg.

/cm2 working pressure polythene pipes of

approved brand incl. joining with approved

solution & all fittings like bend, tee. Y bend

plug bend with water tight jointsIf pipe laid in

trenchesscope -75mm Dia.

Sr PARTCULARS OF ITEM

QTY RATE PER AMOUNT

75 Providing & fixing to wall, ceilling, and floor

in plumb by means of GI clamps of 18 gauge

sheet with 1 to 1.5 mtrs. Distance 6.00 Kg.

/cm2 working pressure polythene pipes of

approved brand incl. joining with approved

solution & all fittings like bend, tee. Y bend

plug bend with water tight jointsIf pipe laid in

trenchesscope -160 mm Dia.

76 Providing & Fixing 600X450X6mm. thick size

approved best quality of looking glass mirror

Modi or gold fish, mounted on 6mm thick ply 4.00 850.90 Nos.

with edging with PVC angle patti as directed

with fixture as required.

77 Providing and fixing in position callapsible

steel shutters with vertical channels 20 x 10 x

mm braced with flat iron diagonals 20 x 5 mm

size with top and bottom rails of T_rin 40x

x 6 mm with 38mm dia, steel pulleys complete

with bolts, nuts, locking arrangements, stoppers

handles including applying a priming coat of

read lead paint.

78 P & F steel cupboard shutter of 20 gauge with

steel frame & fixing the frame with brick

masonary including locking arrangement with

coat of primer ( red oxide ) i.e asian, dulux or 83.00 3730.00 Smt

its equivalent and 3 coats of approved oil paint

i.e asian, dulux or its equivalent etc. complete

as per requirement and instruction of EIC.

79 Providing and fixing precast rubber dye inter

locking concrete block 60mm thick with grade

of concrete M-200 pnumatic comressed by

mechanically pressed and as per approved 322.00 603.00 Smt

design including 75mm sand layer for levelling

and filling the joint with sand in proper line

and level etc comp as per directed.

80 Providing corrugated G.I. sheet of class-3

roofing fixed with glavanished iron J or L

Hooks, Bolts and nuts 8mm diameter with

bitumen and G.I. limpet washer or G.I. limpet 230.00 656.00 Smt

washer. filled with white lead complete

excluding the cost of purlins, Rafters and

Trusses.(1) 0.50 mm thick sheet.

81 Providing and fixing rolling shutters of

approved make made of 80 mm. Wide M.S.

Laths interlocked together through their entire

length and jointed together at the end locks

mounted on specially designed pipe shaft with 4.00 3519.21 Smt

bracket plates, guide channels and out side

locking with push-pull operation including the

cost of Hood cover and spring etc. complete.

(A) Shutters having width below 3.5 M.

Sr PARTCULARS OF ITEM

QTY RATE PER AMOUNT

82 Providing Half round moulded round front

edge in trade of steps including rubbing and 42.00 58.65 Rmt

polishing etc. Complete

83 Providing and fixing Stainless Steel text i.e. in

15" text "પિ મ જ ુ રાત િવજ કંપની લિમટડ,

પેટા િવભાગીય કચેર -ખારગેટ" and "PGVCL"

In 12" text in approved steel grade SS

including all fastners and fixtures at give

location as directed by EIC

84 Providing and fixing MS wire mesh(Chicken

mash) at every joint of masonary and concrete,

or any joint includding all fixtures and fittings

as directed by EIC.

85 Dismentaling tiled of stone floors laid in

mortar including stacking of serviceable

materilas and disposal of unserviceable

materials with all lead and lift.

86 Demolition including stacking of serviceable

materilas and disposal of unserviceable 12.00 1097.15 Cmt

materials with all lead and lift. (i) R.C.C. work

87 Demolition of Brick work and stone masonry

including stacking of serviceable materilas and

disposal of unserviceable materials with all

lead and lift.(ii) In Cement Mortar.

88 Providing and fixing wall panelling, using

frame of 18MM plywood with 12MM plywood

at frontside with laminate of approved shade

for all sides and inside white laminate 72.00 3717.00 Smt

including materials such as beading strips,

adhesive having good quality including labour

complete in all respect as directed by EIC.

89 Providing And fixing single layer water proof

gypsum board 12.5 mm thick sections using

water proof board of size 1220 mm x 1830 mm

x 8.0 mm suspended by GI suspender channel

of size 25 mm x 3 mm with intermediate

channel og size 18 mm x 40 mm x 0.8 mm at

1220 mm center to center ceiling section of

size 40 mm x 35 mm x 0.55 mm at 457 mm c/c 50.00 600.94 Smt

and perimeter channel A of size 20 mm x

mm x 30 mm x 0.5 mm at edges & drops

incl.paper tap sand sofit cleat, anchor fastener,

scoch bolt connecting cleat,joining compound

top coat on ceiling incl.making necy.opening

for light fitting,diffuser etc. comp. as per detail

drawing as directed

90 Providing and fixing pre-cast concrete kerb

stone of gray cement based concrete block

30cm length,30cm height and 15cm thick of

M200 grade concret as per approved design 374.00 408.05 Rmt

and including excavation for fixing in proper

line and level,filling the joint with C:M 1:3

(1cement:3fine sand) etc complete

Sr PARTCULARS OF ITEM

QTY RATE PER AMOUNT

91 Providing & fixing in position fully

panelled/partly panelled partly glazed /full

height/half height alluminium frame partition if

necessary coloured anodized / power coated

rectangular section in 75X38mm vertical and

horizontal to be used for top intermediate

bottom and side and panelled. panelled is to

prepared from 5mm thick modigaurd or

equivalent approved standard quality coloured / 33.00 4085.98 Smt

plain glass of 12mm eco board prelaminated

both side of standard and approved qulity with

glazing dip rubber gasket with alluminium

bidding of required size. all glazing should be

designed with decorative film if necessary

scope includes all fixtures and fastening screws

etc. completed as directed by EIC.panelling is

to be done as directed by EIC.

Estimated Cost Section-I (CIVIL WORKS) in Rs.

92 Providing and fixing concealed point with

single PVC insulator flexible wire 1100 volt

grade copper standard (FR grade ) marks of

approved quality .Using 1.5 thick "1" dia sized

ISI marks PVC pipe with shock proof ISI

marks standard brand

93 .....do.....as above but for 15 AMP SS 1 phase

wiring and earthing as per inst. of EIC

94 Providing and laying external wiring concealed-

1phase wiring up to 2 kw loading from main

switch/intermediate joint( wire) to room by 400.00 112.00 Meter

using standard PVC with seprate main neutral

compls as directed by the EIC

95 Labour charges for fixing of Fan ( ceilling and

96 Labour charges for fixing of tube light/CFL

97 Providing and fixing A/C wiring with 4mmcq.

single standard copper wire and single pole

MCB with box fitting (Copper wire of 4mm2

single standard core with adequate length from

the mains service,MCB and connection box

98 Provoding & fixing 4 ft T-5 TPE complete

tube light as per sample & as per requirement

of following rating wattage capacity (23 watt)

with all acessories

99 Providing and fixing hum free step dimmer for

fan as per sample & as per requirement with all 25.00 235.00 Nos.

Sr PARTCULARS OF ITEM

QTY RATE PER AMOUNT

100 Providing and laying 3 Q line with

WQ.MM.wire four line (3 phase + natureal)

and 2.5 mmsq wire for earthing in concealed

wiring with 1.0 sq.mm.pipe 1.5 mm thick from

buster to distributing MCB board( 3 core

copper standard wire 4.0 mm2

101 MAKING ARRANGEMENT OF fan hook in

ceiling and providing anchor pass hook. as per 21.00 110.00 Nos.

the instruction of the EIC.

102 Providing and earthing with 1.3 mtr 3 " dia CL

pipe with collars connection arrangement for

making regid connection to external GL

flat.The flat will be supplied by the company

earth pipe will be done in a pit 4.5 fit and

marking laying of

103 Supply, Installation, Testing and

Commissioning of suitable sweep, BEE 5 Star

rated, Ceiling fan with Brush Less Direct

Current (BLDC) permanent ferrite magnet

Motor, class of insulation: B, Rust free

nos.Aluminium blades, 2 nos. canopies,

shackle kit with earthing provision, 22 gauge

copper winding, Power factor not < 0.9,

Service Value (CMM/W) minimum 6.85, Air

delivery minimum 215 CMM, 350 RPM,230v

(tolerance as per IS : 374-2019), THD < 10%, 25.00 3300.00 Each

remote or electronic regulator unit for Speed

Control and all remaining accessories including

safety pin, nut bolts, washers, temperature rise

= 75 degree C (Max.), suitable for 140 to

Voltage and rectifier circuit with surge, over

current and overload protection , 50 Hz, Single

phase AC Supply, earthing etc. Complete as

required.[ Make shall be approved by Engineer

in Charge] A)1200 mm sweep

104 Providing and fixing of 32 A DP MCB Hugger

mark for electricity load with required capacity 18.00 450.00 Nos.

& confirming to IS:8828 as directed by EIC.

105 Providing and fixing of 10,16,20 SP MCB

Hugger mark for electricity load with required

capacity & confirming to IS:8828 as directed

106 Providing and fixing of fan's pipe-running ft.

down rod erected with earthing as directed by 30.00 24.00 Nos.

107 Providing & Fixing of Modular LED Light

(tube light/panel light/spot light/strip

light/decorative wall lights etc as per sample

)by suitable driver according to LED PCB as

per requirement of following rating wattage

Sr PARTCULARS OF ITEM

QTY RATE PER AMOUNT

108 Providing and erecting ISI mark Medium class

RIGID PVC PIPES of required size complete

to be erected on/in wall or ceiling erected with

necessary PVC fittings with adhesive solution

& Clamps with required dia of pipes, in

approved manner as directed for e-urja pipe

109 Providing and fixing of 16 channel DVR rack

in approved manner as directed by EIC for e- 1.00 13700.00 Nos.

110 Providing of HARD DISK (4 TB) of required

quality as directed by EIC

111 Supply and Installation of CCTV Camera

SETUP with Dahuva/Hivision/CP Plus

Indoor/Outdoor bullet IP camera as directed by

112 Supply and Installation of CCTV Camera for

power supply for camera as directed by EIC

113 CAT-6 cable with conceal/underground wiring,

Crimping, testing with labour charge for CCTV 365.00 30.00 Meter

114 Supply and Installation of BMC PIN as

directed by EIC

115 Supply and Installation of POWER PIN as

directed by EIC

116 SERVICE CHARGE FOR CAMERA

INSTALLTION as directed by EIC

117 Providing and fixing of LED 22'' INCH

MONITOR at required location as directed by 1.00 8600.00 Nos.

118 Providing and fixing of DVR RANK at

required location with labour charge as directed 2.00 2000.00 Nos.

119 Providing and fixing of DVR POWER

ADAPTAR with labour charge As directed by 2.00 750.00 Nos.

120 Providing and fixing of CCTV CONNECTOR

with labour charge as directed by EIC

121 Providing and fixing of IO Box with labour

charge as directed by EIC

122 Providing and fixing of 16 Port Switch with

labour charge as directed by EIC

123 Providing and fixing of HDMI Cable with

labour charge as directed by EIC

124 Providing and fixing of POE Switch 16+2+1

giga with labour charge as directed by EIC

125 Providing and fixing of Patch 1 Meter For

Table Below with labour charge as directed by 10.00 150.00 Nos.

126 Providing and fixing of Camera Junction Box

with labour charge as directed by EIC

127 Providing and fixing of RJ45 Connecter with

labour charge as directed by EIC

Sr PARTCULARS OF ITEM

QTY RATE PER AMOUNT

128 Providing and fixing of Extention switch

board at computer Table with labour charge as 10.00 450.00 Nos.

directed by EIC

Estimated Cost Sectoin-II (ELECTRICAL WORKS) in Rs.

Total Estimated Cost Section [ A = I +II ] in Rs …

Bidder's offer [B]

GRAND TOTAL [C = A +/- A*B ]

GRAND TOTAL [C = A +/- A*B ]

GST (CGST __% + SGST __%) [ D = C * GST% ]

GRAND TOTAL INCLUDING GST [ E = C + D ]

GRAND TOTAL INCLUDING GST [ E = C + D ]

Final offer in Rs.

Chief Engineer (Material)

PGVCL, Corporate Office, Rajkot