CWE BLY/GE(W)/30 OF 24-25 SPECIAL REPIAR/RENOVATION OF SECURITY WALL/BOUNDARY WALL INCLUDING RESIDENTIAL COMPLEX AT CSD DEPOT BAEILLY UNDER GE (W) BAREILLY

Amount

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles built in cement mortar or cement lime mortar complete all as specified and directed.

Excavation in trenches not exc. 1.50 m wide and not exceeding 1.50 m in depth for foundation etc. or for manholes, cesspits, shafts etc. not exceeding 10 sqm on plan and getting out in soft / loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in each layer as in soil complete all as specified and directed.

Removing excavated material (Soils) n exc. 50m and depositing wheredirected at level not exc. 1.5 M above the starting point complete all as specified and directed.

M&L cement concrete type D2, 1:4:8 (40mm graded stone aggregate) as in foundation and mass concrete complete all as specified and directed

M&L for mild steel TMT bar 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M&L for mild steel TMT bar 5 mm and over dia up to 10mm as in stirrups, spacers , and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Form work to sides of concrete foundations, footings, bases of columns, beams sides and soffits (if any) of foundation and pinth beam and similar work vertical rough finished surfaces of concrete (horizontal or sloping) complete all as specified and directed

M&L for Form work to sides of pillars, struts, columns and stanchions and similar work square, rectangular rough finished surfaces of concrete all as spd and directed.

Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all ceeding 20cm wide complete all as specified and directed

M & L for providing RCC M25 design Mix as in foundation, including rafts, footings, foundation beams; plinth beams; bases for columns, etc. all as spd and directed.

M & L for RCC M25 design Mix as in columns,pillars, post and struts etc. complete all as specified and directed.(Reinforcement shall be measured and paid separately).

M&L for providing, RCC M25 design Mix as in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,copings, kneelers, apex stones, complete all as specified and directed.

M&L for Brickwork with fly ash brick as IS-12894-2002 in CM 1: 6 straight or curved on plan exc 6 m mean radius complete all as specified and directed.

M&L 15 mm thick cement plaster on fair face of brick surfaces or concrete surfaces in cm (1:4) including finishing the surface even and smooth without using extra cement complete all as specified and directed

M&L 15 mm thick cement plaster on brick surfaces other than fair faces or concrete surfaces in cm (1:4) including finishing the surface even and fair complete all as specified and directed

M & L for preparation of Newly plastered surface of walls and applying two coats of cement base paint over a one coat of Primer complete all as specified and directed.

M&L for preparation of plastered or unplastered surfaces of wall/roof/Chajja projections including facia, cornices including brooming down or steel wire brushing scrapping down smoke roof, moulds, moss and efflorescent salts and trading oil and greasy spots etc and etc and applying one coat of weather proof exterior emulsion paint over 1 mm thick wallcare putty upto12.00 m with necessary scafolding complete all as specified and directed. Note- Emulsion to be carried out through air less spray machine ( Mechanical means), Shade and coloured as approved GE.

M & L for Granite stone slab (Z-Black in colour) 18-20mm thick machine cut as on vertical surfaces of wall fixed and jointed with grey cement slurry and pointed with white cement with pigment to match the shade of granite stone including moulding, grinding and polishing complete all as specified and directed.

S & F joint, channel, angle or tee sections Fe 410-W (Gde- E- 250) quality- A, fixed indepedently without connecting plates etc. (cut to ordinary length length indicated) complete all as specified and directed.

Supply and fix razor wire 2.24 mm dia with 20 mm wide & 0.5mm thick razor strip fixed with clamps in rows in angle iron bracket/frame over boundary wall etc complete all as specified and shown on drawing and directed. (Note : (i) Each line wire to be measured separately for payment ). (ii) cost of razer strip shall be included in the unit rate quoted by bidder.

Supply and fix diamond shape high strength steel punched tape concertina coil 600 mm dia (in specified stretched position) hot dip galvanized coated with CLR anti corrosive paint by making diamond shape with the help of dove tail clips (18 SWG) fixed over razor wire with the help of hog rings (14 SWG) in angle iron bracket/frame over boundary wall etc complete all as specified and shown on drawings/ directed. (Note:- Razor wire and angle iron frame/bracket shall be measured and paid separately)

S & F for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe 410 -W (Gde- E- 250) quality A complete all as specified and directed.

S&F for Mild steel, plain, black sheet 1.25 mm thk in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L preparation of Old steel surfaces of any description over 10cm width or girth (guide for roller) and applying coats of synthetic enamel one complete all as specified and directed.

Refixing only in same oppening doors or gates of angle or other section with gusset plate or rails ,baraces ,etc.compltete drill for fixing steel sheeting or other covering door etc to be prepared for hanging or sliding with and including with hanging and higes and hanging also fastening complete all as specified and directed.

UTTRAKHAND BUILDERS (BID ID -3128177)

M/S ARORA ENTERPRISES (BID ID -3128065)

Mohit Enterprises (BID ID -3128384)

M/S Shree Sai Builders (BID ID -3128499)

Shikhar ji Enterprises (BID ID -3127675)