PROVN OF WOODEN RIFLE RACK FOR KOTE, PROVN OF TOILET BLOCK AND PROVN OF DEEP FREEZERS AT MIL STN CHARMAGARH UNDER GE PITHORAGARH.

Amount

DESCRIPTION OF ITEMS

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5M in depth for foundation etc and getting out in hard/dence soil complete all as specified and as directed.

Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in hard/dence soil complete all as specified and as directed.

Rough excavating over areas, n exc 1.5 m deep and getting out in hard /dence soil complete all as specified and as directed.

Returning filling including spreading, levelling, watering and well ramming in layers n exc. 25cm (hard/dense soil)

Filling under floor (except material) including spreading, levelling, watering and well ramming in layers n exc. 25cm complete all as specified.

Removal of excavated soiln n.exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.

M&L for RCC M-25 (Design Mix) as in foundation, including raft, footings, foundation beams, plinth beams, bases for columns etc complete all as specified and as directed.

M&L for RCC M-25 (Design Mix) as in columns, pillars, piers etc complete all as specified and as directed.

M&L for RCC M-25 (Design Mix) as in beams, cantilever, lintels etc complete all as specified and as directed.

M&L for RCC M-25 (Design Mix) as in Shelves etc complete all as specified and as directed.

M&L for form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, plinth beams or similar works vertical or to batter for rough finished surface of concrete complete all as specified and as directed.

M&L for form work to sides of pillars, posts, struts, columns for rough finished surface of concrete complete all as specified and as directed.

M&L for form work to sides and soffits of roof beams, lintels lever shelves incl supports over hang etc ruogh finished surfaces of concrete flat complete all as specified and as directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required incl cranking, bending spirally for hoping for columns hooking ends and bindind with ms wire (annealed) not less than 0.9mm dia quality confirming to complete all as specified and as directed.

Description same as above but, 5 mm dia and over and incl 10mm dia in stirrups, spacers and binders

M&L for providing cement concrete 1:2:4 of type B0 using 12.5 mm graded stone aggregate 40mm thick as in damp proof course to horizontal or slopping or vertical incl. necessary form work and polythene filmes 50 micron over bitumen at the rate of 1.50 Kg per sqm and blinding with clean dry sand @ 0.05 cum per sqm complete all as specified and as directed.

M&L for precast cement concrete Block Masonary with soilid blocks type C1 1:3:6 20mm graded stone aggregate exc 10cm in width and setting in mortar 1:6 complete all as specified and directed .

M&L for precast cement concrete Block Masonary with soilid blocks type C1 1:3:6 20mm graded stone aggregate n.exc 10cm in width and setting in mortar 1:4 complete all as specified and directed .

Cutting chases in brick wall, stone, concrete block or slab walls, pining in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings ,steps,cills sunshades, shelves , lintels, etc and cutting chases for concealed water tubing and making good , cutting n'exc 10 cm girth complete all as specified and directed.

M&l for 5mm thick rendering in CM 1:4 with water proofing compound over 10mm thick rendering in CM 1:6 on fiar faces of brick work or concrete surface of wall finished fair & anven complete all as specified and directed. (WPC shall be measured & paid separately)

M & L 10 mm thick cement plaster on fair faces of brick work or concrete surface on wall in CM 1:6 finished fair and even complete all as specified and directed.

Supply only water proofing compound, complete all as specified and directed.

M&L for hard core of broken stone or boulders gauge n.exc 63mm deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface of broken bricks aggregate complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6of type C-2 using 40mm graded stone agrregate as in sub base as in floor th etc complete all as specified and directed.

M&L for PCC 1:2:4 type B-2 using 40 mm graded stone aggregate as Cement concrete in surface channels and drains complete all as specified and as directed.

S&F of chequered tiles rubber moulded decorative designed cement concrete tiles 25 mm thick size of tiles as approved set, jointed and pointed in neat cement slurry with grey cement and pigments in floor incl 15 mm thick screed bed with cm 1:6 complete all as specified and directed.

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc.

S&F for non-skid joint free ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 Sqm but n exc 0.18 sqm set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed .

M & L for galzed joint free ceramic coloured tiles 350x250x6 to 7mm / 450 x 300 x 6 to 7 mm thick on walls etc set & jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces over &.incl 10mm thick rendering in cement mortar 1:4 for laying wall tiles etc complete all as specified and directed.

S&F of factory made solid PVC door frames of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing

S&F of factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of M S tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain coloured PCV ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail,panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cementsuppling & fixing in the frame at site as per specification & drawings.

S & F Butt hinges 100mm, extruded aluminium alloy with galvanized mild steel hinge pin, anodised of type B-22 and complete all as specified and as directed.

S&F 200mm aluminium anodised barrel tower bolts of extruded section all as specified

S& F 150 mm extruded aluminum alloy handles, fabricated type anodised.

S & F M.S. Framed work such as grills grating etc. with ends of bars sholdered and / or riveted into spikes, framed guard bars / railings complete all as specifiedall and directed.

S & F steel ventilators with top hung shutters incl. hinges, steel handle and steel peg stay complete with glazing sash, dovetailed or welded complete all as specifiedall and directed.

S&F 3mm thick sheet glass ordinary quality and glazing frosted or obscured with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed.

S & F of Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel'

S & F of Pre- painted galvatume aluminum zinc coating GI based corrugated roof steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S & F of Anodised aluminium snap grid frame work for false ceiling all as specified

S&f Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

S & F of 12 mm thick Perforated particle board/ tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed with nails to timber frame work or with staples on snap grid in slop/ceiling

M&L three coats of white wash on walls including preparation of new plastered surface and complete all as specified.

M&L for Preparation of new (Previously untreated) plastered surfaces of walls and applying two coats of cement based paint over one coat primer on walls, complete all as specified and directed

M & L for preparation of new steel or iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed .

M&L for 18 mm to 25 mm thick black marble stone slab toping table rubbed and mirror polished over 15 mm thick screed bed or bedding layer ( 1:4) and jointed with white cement slurry mixed pigment to match the colour incl rounded / half rounded edge as in steps, jambs, pillars, window-cills, partation wall etc complete all as specified and directed.

S&F of 15mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed.

S&F of 20mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed.

S&F of 20 mm bore Gate valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed complete all as specified and directed.

S&F of 15 mm bore dia Angle stop valves of CP any colour screwed down , high pressure , with capston head, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F of 15 mm bore conceled type stop cock of CP colour screwed down , high pressure , with capston head, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F of 15mm bore dia Bib taps chromium plated with capston head, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed .

S&F of under / over Oval type wash basion supperior colour 550X400 mm fitted with granite top over pre cast rcc slab incl Waste coupling of 40 mm bore PTMT (half or full threaded) . (Minimum weight 32mm45gms/40mm-60 gms & suitable CP bottel trap of 40 mm bore dia etc complete all as specified and directed.

S&F of 15 mm bore pillar cock of CP colour screwed down , high pressure , with capston head, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F of 450mm long PVC Connection 15mm size with brass nuts complete all as specified and directed.

S&F of 600x450 mm bevelled edge of slected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to PVC plug with chromium plated brass screws and cup washers complete all as specified and directed.

S&F of Brass chromium plated Tubular towel rail , 20mm dia, D type , 60cm long between falnges complete all as specified and directed.

S&F of vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests complete including provision of cement concrete bedding (excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F of 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets,flushing pipe etc complete all as specified and directed.

S&F of Shower with shower arm 15 mm size, 195mm long with bend of 45degree with flange of brass any colour.(Minimum weight 40gms complete all as specified and directed.

S&F of mild steel pegs set of 6, solid body, 175mm to 250mm etc complete all as specified and directed.

S&F for Vitreous China Urinal, Half stall type, white fitted on wall incl spreader of brass, PVC waste pipe complete all as specified and directed

S&F of PVC (SWR) floor trap with CP grating including jointing to waste pipe 75 mm bore outlet with solvent cement all as specified.

S&F of 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed laid in trenches or in floors etc complete all as specified and directed.

S&F of 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors etc complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction single (Single T) equal or unequal

S&F of PVC (SWR) bends 110 mm bore with or without oval excess door complete all as specified and as directed

Construction of septic tank for 50 users PCC block massonary wall ,PCC in foundation 1:4:8 ,floor ,cover slab incld sludge chamber, CI vent,pipe, CI cowl inlet and outlet pipe,RCC baffle wall and all necessary earth work complete all asDrg No TD/217 CEBZ Dated 25-11-68 specified and directed.

E&M Portion M&L for point wiring Concealed with 1.5 Sqmm, single core (FRLS), PVC insulated with multistranded unsheathed copper conductor cable including rigid non- metallic PVC surface / concealed conduit 20 mm or higher dia, light grade ISI marked complete with all PVC conduit accessories / fittings and sunk switch boxes with 3 mm thick plastic laminated hard glossy surface sheet (white) top cover, including continuous earth wire of PVC insulated, unsheathed, green in colour 1.5 Sqmm multistrand copper conductor (FRLS) connected to all fittings, sunken boxes and common earth and connected to earth dolly , screwed with Brass screws, cup washers complete all as specified and directed for One light point/Fan point/bell point controlled by one, one way switch of 5/6 Amps complete all as specified and as directed.

Ditto all as per Item No 141 above but for one 3/5 pin socket outlet 5/6 Amp on same board with other switch of 5/6 Amp.

Ditto all as per Item No 141 above but for one 3/5 pin 5/6 amps socket outlet point on independent board controlled by one, one way switch of 5/6 amps on independent board.

S & F Switch piano, flush type, white finish, 5/6 amps, single pole, one way all as specified and directed.

S&F Socket outlet 3 pin, 5/6 amps and 2 pin 5/6 amps flush type, complete all as specified and directed.

S&F ceiling rose, surface bakelite, AC, 220/240 volts, 3 terminals, complete all as specified and directed.

Supply and fixing LED Integrated Batten T5 box type surface mounted, (1x18 Watt) prewired including electric electrical connection with PVC insulated twin twisted copper wire of size 0.75 Sqmm from ceiling rose to tube light fitting complete all as specified and directed.

Supply and fixing LED Integrated Batten T5 box type surface mounted, (1x09 Watt) prewired including electric electrical connection with PVC insulated twin twisted copper wire of size 0.75 Sqmm from ceiling rose to tube light fitting complete all as specified and directed.

S&F 1x25 watt LED building security light fitting , PDC housing,IP-65 with 4 KV inbuilt surg protection driver, pressure die-cast aluminium including fixing the same of GI pipe 25 mm dia bore light grade bracket, 1.5 mtr long including necessary cutting / bending /welding and fixed the same with two Nos FI clamps of 40x 4mm duly painted and suitable size of nut & bolts etc. and making electric connection with PVC three core copper flexible wire complete all as specified and directed.

Supply and laying XLPE LT 1100 volts underground earthed cable, PVC bedded, galvanized steel strip or wire armoured, electric power cable heavy duty 1100V with multi stranded, aluminum conductor of cross sectional area 4 core x 16 Sqmm including laying, testing and commissioning complete all as specified and directed.

S&F MCB DB sheet metal enclosure for DB, SPN, 8 way having protection with 200 amps rated bus bar, 240 volts, double door type, suitable for housing MCB's and isolators,concealed in wall complete all as specified and directed.

Supply and Fix MCB single pole, 240 volts, 6-32 Amps of 10 KA complete all as specified and directed.

Supply and Fix MCB single pole & Neutral 240 volts, 40 amps, of 10 KA complete all as specified and directed.

S&F exhaust fan, heavy duty metal body, single phase 230/240 V of size 300mm sweep, 1400 RPM with suitable louvers and making connections with twisted copper flexible wire complete all as specified and directed.

S&f deep freezer electric driven single phase, 230 volt, with glass top, double door approximate storage capacity 419 litres.

S&f voltage stabilizer auto cut single phase, 220/240 volts fitted with high/low voltage cut off relays, time delay relay & arrangement & push button/switch for instant start, suitable for input voltage 165 Volt to 250 Volts and output voltage stabilized between 220 Volt to 230 Volts of capacity 5 KVA complete all as specified and directed.

S&f switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal with box complete all as sp[ecified and directed.

M&L for point wiring Concealed/conduit type (as per site requirement) with 2.5 Sqmm, single core (FRLS), PVC insulated with multistranded unsheathed copper conductor cable including rigid non- metallic PVC surface / concealed conduit 20 mm or higher dia, light grade ISI marked complete with all PVC conduit accessories / fittings and sunk switch boxes with 3 mm thick plastic laminated hard glossy surface sheet (white) top cover, including continuous earth wire of PVC insulated, unsheathed, green in colour 2.5 Sqmm multistrand copper conductor (FRLS) connected to all fittings, sunken boxes and common earth and connected to earth dolly, screwed with Brass screws, cup washers complete all as specified and directed for independent 15 Apm switch socket power point.

M&L for 150 mm thick PCC 1:2:4type B2, (using 40mm graded stone aggregate) as in PCC plateform finished even and without using extra cement complete all as specified and as directed.

M&L Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wideetc rough finished surfaces of concrete flat all as specified.

M&L for 2nd class hardwood wrought as in scantlings wrought timer framed and fixed as in column support,rafter ,purlin and ceiling work, complete all as specified and directed.

S&F for First class softwood boarding 40mm thick, planed one side with butt joints, fixed with nails in any situation (except flooring and skirting) to replace old or decayed boarding in patches including cutting old complete all as specified and directed.

M&L for preparing surfaces and aplying of wood and wood based materials new surface of varnishing under coating finishing coat with enammel varnish with thin varnish or laquer or shelac varnish of any description and girth, not otherwise described complete all as specified and directed

S&F for steel locking arrangement to lock the rifles in the rack all as shown in drawing and speified.

m/s RC punetha