Replacement of old and damaged GI pipes of GWSS to Maa Bhangayani Mandir under JJM in GP Dewari Kharan Tehsil Sangrah Distt Sirmour HP)

Amount

Excavation in foundation and trenches in all type of soil such as pickwork jumper work Kankar, moorum, shingles including decomposed soft and hard rock etcupto all heights stacking the excavated earth not more than 3mtrs clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinths sides of foundations etc. consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated earth in all leads and lifts as per the direction of Engineer in-charge.

Excavation in drains and channels etc.in earth work for pipes up to all depths in all classification of earthwork such as pick work, jumper work, saturated soil including bailing or pumping out water, blasting soft/hard rock or chiseling soft / hard rock where blasting is prohibited in all lifts including jungle clearance wherever required, trimming & dressing of sides, leveling of beds to correct grade including shoring/struting, planking, timbering & dewatering wherever required stacking the useable/unuseable material/soil seperately & after laying, jointing & testing of pipes, returning the useable soil in trenches in 15 cm layers including consolidating of such deposited layer by ramming & watering & then disposing of all surplus excavated soil/unuseable material as directed with in all leads & lifts including restoration of un-metalled surfaces to its original condition & including cost of diversion for traffic, night signals, fixing caution boards, crossing over trenches for access to houses, fencing etc. complete in all respects with-in all leads & lifts as per directions of the Engineer Incharge.

Laying, , jointing , testing & commissioning at site in trenches following plain ended GMS pipes of following dia of Heavy/Medium Grade conforming to BIS 1239-(Part-1)-1990 or latest with up to date ammendments, capable of withstanding required test pressure as prescribed in BIS code, in randum lengths of 5.5 to 6.5 mtr. The pipes ends shall be bevelled suitable for butt weld, including the cost of jointing with butt welding confirming to IS 816-1969 or latest as applicable (leak proof) in three layers at site of work with welding rods of standard make & all allied accessories whatever required for welding at site, tail pieces, tees, bends manufactured from parent pipes etc. and cutting of pipes wherever required as per site requirement i/c carriage in all leads & lifts as directed by Engineer-Incharge (Earth work shall be measured & paid for seperately).

65 mm dia (Light grade)

Providing, welding and fixing M.S. plate flanges of following dia. (nominal bore) of following Flange Tables confirming to IS 6392-1971 or latest with up to date ammendments to MSERW/GI pipes after every 90 metres or as per site requirement including cutting of pipes wherever required, welding in three layers (leak proof) confirming to specifications as prescribed in relvent I.S. Code i.e. IS 816-1969 or latest as applicable with up to date ammendments with nuts, bolts & washers & specials etc. confirming to IS-1963 or latest with up to date ammendments including packing sheet i.e. asbestos fibre sheet minimum 3mm thick and painting with anticorosive paints complete in all respect i/c all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

65 mm dia (F.table-17)

Wire crates made of G.I. Wire filled with boulders with square cut faces against the wire (boulder filling to be measured and paid for separately) G.I. Wire 5mm thick corresponding to SWG-6 15cmx15cm mesh.as per direction of Engineer-in-charge including entire carriage of material upto all leads and lifts.

Wire crates of G.I. wire filled with boulders with square cut faces against the wire (wire crates to be measured and paid for separately) including entire carriage of material upto all leads and lifts dry hand packed tightly in wire crate vertical bund with opening faces (wire crate to be measured and paid for separately) including entire carriage of material upto all leads and lifts.

Providing and fixing double flanged cast iron sluice valve of following dia. of leader/Kirlosker/Bir/Kartar make as per IS 780 class PN-1.6 and capable of with standing the normal seat pressure as per IS 5312-1884 P-1 and as per direction of the Engineer- in-charge upto all lead and lifts.

65mm dia

UJAGAR SINGH

Jagat Ram