LAYING AND UPGRADATION DRAINAGE LINE MAINTANANCE WORK at Karmchari nagar Road, CPNagar Road, Ghatlodia Gam Road and Other Diff. Area of Ghatlodia Ward in North West Zone (ARC)

Providing and laying in position Ready Mixed

M200 grade concrete for reinforced cement conctere

work , using cement content as per approved Design

Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for a

lead up to 10 kms having continuous agitated mixer,

manufactured as per mix design of specified grade

for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of

laying, excluding the cost of centering shuttering

29 5.00 finishing and reinforcement including cost of 4793.10 Cu.M.

admixtures in recommended proportions as per IS:

9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and

durability as per direction of the Engineer - in -

charge. Without Fly Ash (Min cement level as per

latest IS 456 shall be maintained) (R &B SOR 2023-24

Ahmedabad cit; Item no. 5055 Page no. 66)

Labour charger for lowering existing Ventilating

column safely with the help of required capacity of

hydra crane or any type of required capacity of

crane. Item also includes welding machine , gas

30 5.00 cutter , electric cutter , breaker etc necessary 5803.57 No

machineries required for this work with out damage

and item also includes carting the same to the AMC

store. etc. comp as directed.(Based on Drainage

Constructing Bombay Pattern Type Catch Pit of size

0.60 x 0.60 depth up to 1 mt including excavation,

B.B.C.C. (1:5:10), 23 cms thick brick maso. wall in

the prop. of CM (1:6) with 40 mm thick IPS

31 5.00 flooring in the prop M15 at bottom and 15 mm thick 3125.00 No

cement plaster inside the catch pit in the proportion

of CM (1:3) with out jali etc. comp. as

directed.(Based on Drainage SOR 2009-10)After

Deduction 12 % GST)

CatchPit Jali Fixing P/F FRC catch pit jali with

frame 600mm x 600mm clear opening etc. comp. As

32 5.00 directed by engineer in charge. (Based on Drainage 1383.92 No

SOR 2009-10)After Deduction 12 % GST)

Providing, laying and jointing in true line and level

U.P.V.C pipe (SCH - 40) of following dia. including

fittings of standard make as approved by Engineer -

in - charge. Pipe shall be fixed on the wall with the

help of clamp at every shall be concealed as

33 0.00 directed including necessary Tee ,bend, any joint &

any fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including

cost of all materials ((R &B SOR 2023-24 page no.

A 5.00 15 mm (I.code no. 23061) 71.93 RMT

B 5.00 25 mm (I.code no. 23062) 90.93 RMT

C 5.00 32 mm (I.code no.23063) 117.93 RMT

D 5.00 40 mm (I.code no. 23064) 146.65 RMT

E 5.00 50 mm (I.code no. 23065) 193.73 RMT

F 5.00 110mm (I.code no. 23067) 826.88 RMT

G 5.00 160 mm (I.code no. 23066) 822.99 RMT

Providing, supplying & fixing to wall ceiling and

floor 10.0 kg. F/Cm2 working pressure polythelene

pipes of the following outside dia. Low density.

Complete with special flange empression type

34 0.00 fittings. Wall clips etc. incl. making good the wall

ceilling and floor. ( Item Code 23004F & 23004G

No 23.8 PG No.164 .Ahmedabad City S.OR.2023-

Providing and operation dewatering Pump including

fuel charges & operator Charges etc. as directed etc.

comp. (Shift for Eight Hour) (For Each Pump Set,

No payment should be allowed for non working

condition of machinery)

Dewatering by pumping set

Dewatering by pumping set of required capacity

including temporary platform carting pumping at

36 15.00 site and fixing the same in position including all 18.32 H.P/Hr

accessories, and fuel and labour etc. complete.

(GWSSB SOR 2022-23 (revised) Section 2E item no.

on page no. 104)

Hiring and operating the 20 KV 3 Phase Electric

Generator for operating desilting machinery, and

lighting and other requirements with Arranging

diesel to run the D.G. Set Do As Directed. 8 Hrs

37 10.00 Shift. (No payment should be allowed for non 2500.00 Shift

working condition of machinery) (Based on

Drainage SOR 2009-10)After Deduction 12 % GST)

Providing & Supplying JCB Machine on rental basis

in case of emergency situation and break down type

work & also during unavoidable condition as per

instruction of engg. in charge, rate includes all nece.

shifting, fuel and operating charges and stacking of

38 10.00 useful & non-useful materials separately up to store. 535.71 Hour

(No payment should be allowed for non working

condition of machinery and for pipe line excavation

and laying work) (Based on Drainage SOR 2009-

10)After Deduction 12 % GST)

Supplying Pneumatic Breaker Machine for RCC

Slab or Asphalt Demolishing Work on site by using

Operator, fuel, power Supply etc. Complete as

Directed. (No payment should be allowed for non

39 10.00 working condition of machinery and for pipe line 535.71 HR.

excavation and M.H. work. Allowed only for break

down work) (Based on Drainage SOR 2009-10)After

Deduction 12 % GST)

Providing & Supplying Hitachi Machine-110

capacity on rental basis in case of emergency

situation and break down type work & also during

unavoidable condition as per instruction of engg. in

40 10.00 charge, rate includes all nece. shifting, fuel and 1785.71 HR.

operating charges . (No payment should be

allowed for non working condition of machinery)

Providing & Supplying Hitachi Machine-200

capacity on rental basis in case of emergency

situation and break down type work & also during

unavoidable condition as per instruction of

41 10.00 engg.incharge , rate includes all nece. shifting, fuel 2471.20 HR.

and operating charges. (No payment should be

allowed for non working condition of machinery)

(Based on Drainage SOR 2009-10)After Deduction

Providing & Supplying hydra carne Machine of

tone capacity on rental basis in case of emergency

situation and break down type work & also during

unavoidable condition as per instruction of engg. in Per

42 5.00 charge, rate includes all nece. shifting, fuel and 3334.49 hr

operating charges. (No payment should be allowed Shift

for non working condition of machinery) (GWSSB

SOR 2022-23 (revised) Section 2E item no. 7 on Page

43 Providing F.R.C. MH seat cover incl. carting to the

work site etc. comp. Directed. (Rates

(Rates are based on

Central Store circular no. 01/2025-

F.R.C. Extra Heavy Duty (EHD-35)

Manhole Covers & Frames Cover : 728mm ø &

100 mm thick circular cover, 35.00 MT load design,

100x2mm MS flat allround, 16mm ø plain round

bar for lifting the cover & should be fitted with

plastic cups. Frame : 560 mm ø clear opening,

outer size- 888x888x175 mm. On the upper

periphery of frame 25 x 3 mm wide MS flat should

be well embed in concrete to protect the edges of

frame. FRC E.H.D.-35 manhole cover & frame

described as above

( Only Cover ) F.R.C. Extra Heavy Duty

[EHD-35] Machinehole Covers & Frame-

b 2.00 560mm ø clear opening, The dimension of 3885.59 No.

frame and cover as Directed

( Only Frame ) F.R.C. Extra Heavy Duty

[EHD-35] Machinehole Covers & Frame-

c 2.00 560mm ø clear opening, The dimension of 3029.66 No.

frame and cover as per Directed

44 F.R.C. Heavy Duty [HD-20] Machinehole

(SET cover and frame) F.R.C. Heavy Duty

[HD-20] Machinehole Covers & Frames-

560mm ø clear opening, The dimension of frame

and cover as per mentioned in Amend No.1 to IS

(Only Cover) F.R.C. Heavy Duty [HD-

20] Machinehole Covers & Frames- 560mm ø

B 2.00 clear opening, The dimension of frame and cover 3177.97 No

as per mentioned in Amend No.1 to IS 12592 :

2002 table 1 (Only Cover)

(Only Frame ) F.R.C. Heavy Duty [HD-

20] Machinehole Covers & Frames- 560mm ø

C 2.00 clear opening, The dimension of frame and 3029.66 No

cover as per mentioned in Amend No.1 to IS

12592 : 2002 table 1 (Only Frame )

45 0.00 F.R.C. Medium Duty [MD-10] Machine hole

(SET cover and frame) F.R.C. Medium Duty [MD-

10] Machinehole Covers & Frames- 560mm ø

A 4.00 clear opening, The dimension of frame and 4025.42 Set.

cover as per mentioned in Amend No.1 to IS

12592 : 2002 table 1 (SET cover and frame)

(Only Cover ) F.R.C. Medium Duty [MD-

10] Machinehole Covers & Frames- 560mm ø

B 2.00 clear opening, The dimension of frame and 2224.58 No.

cover as per mentioned in Amend No.1 to IS

(Only Frame ) F.R.C. Medium Duty [MD-

10] Machinehole Covers & Frames- 560mm ø

C clear opening, The dimension of frame and No

cover as per mentioned in Amend No.1 to IS

F.R.C. Strom water Grating Set Grating (jali)

x 740 X 90 mm Square Jali. 20.00 MT Load Design

, 90 X2 mm MS Flat Around, Frame : 600 X

mm clear opening, outer size 900 x 900 x165

mm. om upper periphery of frame 25 x 3 mm wide

46 5.00 MS Flate Should be well embded in concrete to 5173.73 No

protect the edge Frame comp.. As directed by

engineer in charge. (Rates are based on Central

Store circular no. 02/2024-25 Dt. 14.10.2024)

F.R.C. Strom water Grating Set Grating (jali)

x 690X 70 mm Square Jali. 20.00 MT Load Design

70 X2 mm MS Flat Around, Frame : 600 X 600 mm

clear opening, outer size 800 x 800 x120 mm.

om upper periphery of frame 25 x 3 mm wide MS

47 1.00 Flate Should be well embded in concrete to protect 4741.53 No

the edge Frame comp.. As directed by engineer in

charge. (Rates are based on Central Store

circular no. 02/2024-25 Dt. 14.10.2024)

F.R.C. Strom water Grating Set Grating (jali)

x 620 X 75 mm Square Jali. 20.00 MT Load Design

,75 X1.2 mm MS Flat Around, Frame : 500 X

500 mm clear opening, outer size 770 x

x135 mm. om upper periphery of frame 25 x

48 1.00 31.5 mm wide MS Flate Should be well embded 4734.75 No

in concrete to protect the edge Frame comp.. As

directed by engineer in charge. (Rates are based

on Central Store circular no. 02/2024-25 Dt.

Filling in plinth with sand under floors including

watering ramming, consolidating and dressing

49 5.00 complete (R &B SOR 2023-24 Ahmedabad cit; Item 455.53 Cmt

no. 4.24; 04007A Page no. 48)

Providing, laying, spreading and compacting graded

stone aggregate to wet mix macadam specification

including premixing the Material with water at

OMC in mechanical mix plant carriage of mixed

50 Material by tipper to site, laying in uniform layers in

sub- base / base course on well prepared surface and

compacting with vibratory roller to achieve the

desired density as per Codal Provision.

a 10.00 Production & Supply of WMM 1975.00 Cmt

b 5.00 Laying of WMM 35.00 Cmt

Corrugated DWC HDPE pipes (Non-pressure pipes)

Providing and supplying,Lowering, Laying &

Joining of Class SN8 Structured Wall polyentheiene

piping systems (Pipe with online/offline coupler and

elastomeric sealing ring) with non-smooth external

51 annular corrugated and smooth internal surface

(Double central taxes, transportation, freight

charges, octroi, inspection charges, loading,

unloading, coveyance to the departmental stores etc.

complete-Road Project Approved Rate

Drilling of 900mm dia Horizontal borehole for

watermain pipeline crossing under the road incl in

all strata with required lenth incl fixing of 800mm

52 dia M.S/RCC casing pipe with pushing etc complete

various size for 406.4 to 508 mm dia watermain

(For 45 mt Length)

RCC Casing pipe in place of MS pipe+Water main-

Providing & Constructing Precast RCC Manhole in

RCC M-40 grade Controlled concrete as per

drawing, in OPC including excavation, 80 mm thick

53 P.C.C. in M 15, Reinforcement in TMT-500, PVC

Foot steps, Providing & fixing FRC Manhole frame

& cover including inside epoxy paint complete etc.

0.00 For 300, 450 & 600 dia. Pipe(upto 4 m. depth)

1.00 (i) 1.2 dia x 2.0m Depth 39937.00 No

1.00 (i) 1.2 dia x 3.0m Depth 51514.00 No

For 300,450 & 600 dia. Pipe (More than 4.0 mt.

0.00 depth) & for 900 mm dia.pipe for any depth

0.00 (i) 1.5 dia x 4.0m Depth 69388.00 No

Constructing Scrapper Slab Type M.H. Chamber of

following size incl. excavation, refilling, brick bats

cement concrete (1:5:10) of thickness 15 C.M., C.C.

channel (1:2:4) of thickness 10 C.M., finished

mm thick cement plaster inside (SRC) & outside

(only for shaft) in C.M.1:3, finishing with cement

54 slurry, P/F 4 mm dia M.S Steel HDPE coated steps

35 cm c/c at 35 cm staggered Masonry in C.M. 1:5,

RCC slab in CC 1 : 1.5 : 3 of thickness 23 C.M,

including Cantering & reinforcement (double jalli at

15 C.M c/c bothway 12 mm dia.) but excluding the

cost of Manhole seat cover etc. completed (Inside

Clear, M.H. length should be parallel to the flow,

Extra rate over item of Constructing Scrapper Slab

Type M.H. Chamber of following size for

55 constructing M.H. Chamber,per 1.00 Decimeter of

additional depth or part there of etc. complete.

(inside) and depth from

0.00 For Pipe dia. <= 1000 mm

1.00 1.6 m x 1.6 m Manhole depth from 4.0 to 5. 0 m 663.71 DM

1.00 1.6 m x 1.6 m Manhole depth from 6.0 to 7. 0 m 682.65 DM

0.00 For Pipe dia. <= 1200 mm

1.00 1.8 m x 1.8 m Manhole depth from 4.0 to 5. 0 m 732.25 DM

1.00 1.8 m x 1.8 m Manhole depth from 6.0 to 7. 0 m 753.89 DM

Total Estimated Tender Rs.