Fire Fighting System at Survey Bhavan at Bharuch (D.I.L.R. District Inspector Land Record) Dist.Bharuch

Fire Fighting System At Survey Bhavan, Bharuch

BILL OF QUANTITIES

Percentage Rate Tender

Item Description of Item Quantity Unit Rate In Amount

1 Supply. installation, testing & commissioning of ISI 1.00 No 98432.21

approved electrical motor driven jockey pump set

having 10.8 m3/hr. @ 70m head. The pump unit shall

be a horizontally direct mounted motor. Unit shall

comprise the following minimum requirements: a)

Pump, b) Electric motor IE2, c) Foundation bolts, d)

Mating flanges with gasket and fasteners, e)

Discharge gauges, etc. complete in all respect, with

2 Supply, installation, testing & commissioning of 1.00 No 25677.97

Priming tank, HDPE type, 1000 litres, with necessary

piping 100 mm size, G.I pipe for priming the pumps,

pipe of with butterfly valves for isolation, Water

Filling to priming tank by piping min. 50 mm size,

with all complete.

3 Supply, installation, testing & commissioning of 1.00 No 55635.60

Manifold( surge vessel,)for fire hydrant system, min.

300 mm diameter, made from M.S plate, hydro tested

to 15 kg./cm2. with ball valves, header with

couplings for fitting pressure switches, pressure

gauges etc.with necessary isolation valves with all

4 Supply, fabrication & erection of aboveground G.I. 'C'- 7.00 Mtr 398.01

Class, ERW piping, conforming to IS:1239, part-I,

Heavy class up to 150 mm dia. and IS:3589, for size

200 mm dia. & above, thickness. G.I. pipe fitting's as

per IS: 1239, part-II, Heavy class for size 150 mm dia.

& below & IS: 3589, for size 200 mm dia. above,

flanges, nuts bolts & washers, 3 mm thick gasket,

pipe hangers, etc.

Hydrostatic testing for 2 hour's at 150% of the

system pressure, hook-up etc.

Painting for piping, fittings & structural pipe support,

shall be two coat of zinc primer and two coats of fire

red conf. to IS: 5, Shade 536. Complete with all

accessories as per approved drawings, specicification

and direction of the Engineer-in-Charge, with all

complete. 25 mm dia.

Item Description of Item Quantity Unit Rate In Amount

5 Supply, fabrication & erection of aboveground G.I. 'C'- 20.00 Mtr 641.95

Class, ERW piping, conforming to IS:1239, part-I,

Heavy class up to 150 mm dia. and IS:3589, for size

200 mm dia. & above, thickness. G.I. pipe fitting's as

per IS: 1239, part-II, Heavy class for size 150 mm dia.

& below & IS: 3589, for size 200 mm dia. above,

flanges, nuts bolts & washers, 3 mm thick gasket,

pipe hangers, etc.

Hydrostatic testing for 2 hour's at 150% of the

system pressure, hook-up etc.

Painting for piping, fittings & structural pipe support,

shall be two coat of zinc primer and two coats of fire

red conf. to IS: 5, Shade 536. Complete with all

accessories as per approved drawings, specicification

and direction of the Engineer-in-Charge, with all

complete. 50 mm dia.

6 Supply, fabrication & erection of aboveground G.I. 30.00 Mtr 1176.90

'C'-Class, ERW piping, conforming to IS:1239, part-I,

Heavy class up to 150 mm dia. and IS:3589, for size

200 mm dia. & above, thickness. G.I. pipe fitting's as

per IS: 1239, part-II, Heavy class for size 150 mm dia.

& below & IS: 3589, for size 200 mm dia. above,

flanges, nuts bolts & washers, 3 mm thick gasket,

pipe hangers, etc.

Hydrostatic testing for 2 hour's at 150% of the

system pressure, hook-up etc.

Painting for piping, fittings & structural pipe support,

shall be two coat of zinc primer and two coats of fire

red conf. to IS: 5, Shade 536. Complete with all

accessories as per approved drawings, specicification

and direction of the Engineer-in-Charge, with all

complete. 80 mm dia.

7 Supply, fabrication & erection of aboveground G.I. 'C'- 200.00 Mtr 1690.47

Class, ERW piping, conforming to IS:1239, part-I,

Heavy class up to 150 mm dia. and IS:3589, for size

200 mm dia. & above, thickness. G.I. pipe fitting's as

per IS: 1239, part-II, Heavy class for size 150 mm dia.

& below & IS: 3589, for size 200 mm dia. above,

flanges, nuts bolts & washers, 3 mm thick gasket,

pipe hangers, etc.

Hydrostatic testing for 2 hour's at 150% of the

system pressure, hook-up etc.

Painting for piping, fittings & structural pipe support,

shall be two coat of zinc primer and two coats of fire

red conf. to IS: 5, Shade 536. Complete with all

accessories as per approved drawings, specicification

and direction of the Engineer-in-Charge, with all

complete. 100 mm dia.

Item Description of Item Quantity Unit Rate In Amount

8 Supply, fabrication & erection of aboveground G.I. 'C'- 25.00 Mtr 2525.00

Class, ERW piping, conforming to IS:1239, part-I,

Heavy class up to 150 mm dia. and IS:3589, for size

200 mm dia. & above, thickness. G.I. pipe fitting's as

per IS: 1239, part-II, Heavy class for size 150 mm dia.

& below & IS: 3589, for size 200 mm dia. above,

flanges, nuts bolts & washers, 3 mm thick gasket,

pipe hangers, etc.

Hydrostatic testing for 2 hour's at 150% of the

system pressure, hook-up etc.

Painting for piping, fittings & structural pipe support,

shall be two coat of zinc primer and two coats of fire

red conf. to IS: 5, Shade 536. Complete with all

accessories as per approved drawings, specicification

and direction of the Engineer-in-Charge, with all

complete. 150 mm dia.

9 Supply, fabrication & erection of aboveground G.I. 'C'- 5.00 Mtr 3423.73

Class, ERW piping, conforming to IS:1239, part-I,

Heavy class up to 150 mm dia. and IS:3589, for size

200 mm dia. & above, thickness. G.I. pipe fitting's as

per IS: 1239, part-II, Heavy class for size 150 mm dia.

& below & IS: 3589, for size 200 mm dia. above,

flanges, nuts bolts & washers, 3 mm thick gasket,

pipe hangers, etc.

Hydrostatic testing for 2 hour's at 150% of the

system pressure, hook-up etc.

Painting for piping, fittings & structural pipe support,

shall be two coat of zinc primer and two coats of fire

red conf. to IS: 5, Shade 536. Complete with all

accessories as per approved drawings, specicification

and direction of the Engineer-in-Charge, with all

complete. 200 mm dia.

10 Supply, installtion, testing & commissioing of 20.00 Mtr 2020.00

Underground GI (ERW) piping conforming to

IS:1239, part-I, Heavy class ('C' class) up to 150 mm

dia. and IS:3589 Heavy class ('C' class), for 200 mm

dia. & above, min. 6.35mm thickness including Heavy

class fittings, anti-corrosive tape of size 150 mm

wide x 4 mm thick, wrapping & coating with 13KV

holiday testing . Rates shall include sand bedding of

75mm dia all around, backfilling of the excavated

including installation of heavy pipe fitting's, flanges,

etc. 10 % of all the welded joints shall be done

radiographically tested and 50% of the joints

radiographed shall be the "Field Joints". Hydrostatic

testing for 2 hours at 150% of the system pressure,

hook-up etc., complete with all accessories as per

approved drawings, specicification and direction of

the Engineer-in-Charge, with all complete. (Road

Crossing) 100 mm dia.

Item Description of Item Quantity Unit Rate In Amount

11 Supply, installtion, testing & commissioing of 10.00 Mtr 3047.12

Underground GI (ERW) piping conforming to

IS:1239, part-I, Heavy class ('C' class) up to 150 mm

dia. and IS:3589 Heavy class ('C' class), for 200 mm

dia. & above, min. 6.35mm thickness including Heavy

class fittings, anti-corrosive tape of size 150 mm

wide x 4 mm thick, wrapping & coating with 13KV

holiday testing . Rates shall include sand bedding of

75mm dia all around, backfilling of the excavated

including installation of heavy pipe fitting's, flanges,

etc. 10 % of all the welded joints shall be done

radiographically tested and 50% of the joints

radiographed shall be the "Field Joints". Hydrostatic

testing for 2 hours at 150% of the system pressure,

hook-up etc., complete with all accessories as per

approved drawings, specicification and direction of

the Engineer-in-Charge, with all complete. (Road

Crossing) 150 mm dia.

12 Design , Supply and installation of Safety Signage 8400.00 Sq. inch 9.41

made of Zinc Sulphilde based glow in dark , Rigid

sheet with High Luminous property enclosed in a

transperent weather proof UV stabilized plastic

pasted on 3 mm thick clear acrylic sheet such as

EXITS, EMERGENCY EXIT, DO NOT USE LIFT DURING

FIRE, FLOOR MARKINGS, FIRE LIFT, STAIRCASE

EXIT, FIRE ALARM CALL POINT, FIRE HOSE REEL,

FIRE HYDRANT POINT etc.

13 Supply, Installtion, Testing & Commissioing of 2.00 No 556.36

Standard Response Sprinkler, Pendent Brass

Sprinkler, Quartzoid Bulb type with crome finish,

nickel crome platde, K factor K-80, Temp.- 680C,

1/2" end connection including resessed escutcheon.

14 Supply, installation, testing & commissioning of 3.00 No 2824.58

pressure switch. (Range 0 to 16 kg/cm2)

15 Supply, installation, testing & commissioning of 150 6.00 No 2738.98

mm dia. dial Burdon Type Glycerine Filled pressure

gauge with isolation ball valve arrangements with

necessary isolation valves with all complete.( Range

16 Supply, installation, testing & commissioning of 2.00 No 5905.93

Cast iron body double flanged gate valve With Rising

Spinldle conf. to IS: 14846, PN-1.6 with mating

flanges, drilling as per IS/ANSI 150# with mating

flanges, galvanized nut, bolts & washers, gasket

mm thick, etc., with all complete. 50 mm dia.

17 Supply, installation, testing & commissioning of 2.00 No 8182.71

Cast iron body double flanged gate valve With Rising

Spinldle conf. to IS: 14846, PN-1.6 with mating

flanges, drilling as per IS/ANSI 150# with mating

flanges, galvanized nut, bolts & washers, gasket

mm thick, etc., with all complete. 80 mm dia.

Item Description of Item Quantity Unit Rate In Amount

18 Supply, installation, testing & commissioning of 2.00 No 10271.18

Cast iron body double flanged gate valve With Rising

Spinldle conf. to IS: 14846, PN-1.6 with mating

flanges, drilling as per IS/ANSI 150# with mating

flanges, galvanized nut, bolts & washers, gasket

mm thick, etc., with all complete. 100 mm dia.

19 Supply, installation, testing & commissioning of 2.00 No 15920.34

Cast iron body double flanged gate valve With Rising

Spinldle conf. to IS: 14846, PN-1.6 with mating

flanges, drilling as per IS/ANSI 150# with mating

flanges, galvanized nut, bolts & washers, gasket

mm thick, etc., with all complete. 150 mm dia.

20 Supply, Installation, Testing & Commissioning of 6.00 No 2011.45

Cast iron body Butterfly valve according to IS:

PN-1.6, Iron Disc for size 150 mm dia. & below Lever

operated and above 150 mm dia. Gear operated

complete with mating flanges /ANSI class # 150 with

bolts & nuts washers, rubber gaskets 3 mm thick,

etc., with all complete. 50 mm dia.

21 Supply, Installation, Testing & Commissioning of 4.00 No 2567.79

Cast iron body Butterfly valve according to IS:

PN-1.6, Iron Disc for size 150 mm dia. & below Lever

operated and above 150 mm dia. Gear operated

complete with mating flanges /ANSI class # 150 with

bolts & nuts washers, rubber gaskets 3 mm thick,

etc., with all complete. 80 mm dia.

22 Supply, Installation, Testing & Commissioning of 8.00 No 3124.15

Cast iron body Butterfly valve according to IS:

PN-1.6, Iron Disc for size 150 mm dia. & below Lever

operated and above 150 mm dia. Gear operated

complete with mating flanges /ANSI class # 150 with

bolts & nuts washers, rubber gaskets 3 mm thick,

etc., with all complete. 100 mm dia.

23 Supply, Installation, Testing & Commissioning of 4.00 No 4493.64

Cast iron body Butterfly valve according to IS:

PN-1.6, Iron Disc for size 150 mm dia. & below Lever

operated and above 150 mm dia. Gear operated

complete with mating flanges /ANSI class # 150 with

bolts & nuts washers, rubber gaskets 3 mm thick,

etc., with all complete. 150 mm dia.

24 Supply, installation, testing & commissioning of Cast 2.00 No 1540.67

iron body Dual Plate Wafer Type NRV conf. to IS:

PN-1.6 complete with mating Flanges class #

with bolts & nuts, washers, gaskets 3 mm thick, etc.,

with all complete Accessories 50 mm dia.

25 Supply, installation, testing & commissioning of Cast 1.00 No 2225.42

iron body Dual Plate Wafer Type NRV conf. to IS:

PN-1.6 complete with mating Flanges class #

with bolts & nuts, washers, gaskets 3 mm thick, etc.,

with all complete Accessories 80 mm dia.

Item Description of Item Quantity Unit Rate In Amount

26 Supply, installation, testing & commissioning of Cast 2.00 No 3166.95

iron body Dual Plate Wafer Type NRV conf. to IS:

PN-1.6 complete with mating Flanges class #

with bolts & nuts, washers, gaskets 3 mm thick, etc.,

with all complete Accessories 100 mm dia.

27 Supply, installation, testing & commissioning of Cast 1.00 No 5820.34

iron body Dual Plate Wafer Type NRV conf. to IS:

PN-1.6 complete with mating Flanges class #

with bolts & nuts, washers, gaskets 3 mm thick, etc.,

with all complete Accessories 150 mm dia.

28 Supply, installation, testing & commissioning of SG 1.00 No 1112.71

iron body SinglePlate Wafer Type NRV conf. to

ASTMA 536, PN-1.6 complete with mating Flanges

class # 150 with bolts & nuts, washers, gaskets 3 mm

thick, etc., with all complete. Accessories 50 mm dia.

29 Supply, installation, testing & commissioning of SG 1.00 No 1455.09

iron body SinglePlate Wafer Type NRV conf. to

ASTMA 536, PN-1.6 complete with mating Flanges

class # 150 with bolts & nuts, washers, gaskets 3 mm

thick, etc., with all complete. Accessories 80 mm dia.

30 Supply, installation, testing & commissioning of SG 1.00 No 1797.46

iron body SinglePlate Wafer Type NRV conf. to

ASTMA 536, PN-1.6 complete with mating Flanges

class # 150 with bolts & nuts, washers, gaskets 3 mm

thick, etc., with all complete. Accessories 100 mm dia.

31 Supply, installation, testing & commissioning of Y 1.00 No 5563.55

Type Strainer complete with mating flanges with

bolts & nuts, washers, gaskets 3 mm thick, etc., with

all complete accessories. 80 mm dia.

32 Supply, installation, testing & commissioning of Y 1.00 No 7275.42

Type Strainer complete with mating flanges with

bolts & nuts, washers, gaskets 3 mm thick, etc., with

all complete accessories. 100 mm dia.

33 Supply, installation, testing & commissioning of Y 2.00 No 11555.09

Type Strainer complete with mating flanges with

bolts & nuts, washers, gaskets 3 mm thick, etc., with

all complete accessories. 150 mm dia.

34 Supply, installing, testing and commissioning of 1.00 No 4194.07

Normax make CI heavy duty ball type foot valve with

flanges, nut bolts, gaskets etc. with necessary

complete accessories. 80 mm dia.

35 Supply, installing, testing and commissioning of 1.00 No 6162.71

Normax make CI heavy duty ball type foot valve with

flanges, nut bolts, gaskets etc. with necessary

complete accessories. 100 mm dia.

36 Supply, installing, testing and commissioning of 1.00 No 12411.02

Normax make CI heavy duty ball type foot valve with

flanges, nut bolts, gaskets etc. with necessary

complete accessories. 150 mm dia.

Item Description of Item Quantity Unit Rate In Amount

37 Supply, installation, testing & commissioning of Four 1.00 No 8987.29

way fire brigade Inlet connection with 63 mm dia.

stainless steel (SS304) instantaneous male inlets

with built in non return valve in each inlet with

mm dia. header pipe, suitable rubber cap and GI

chain including nuts, bolts, washers, gasket 3 mm

thick, etc. with all complete.

38 Supply, installation, testing & commissioning of Two 1.00 No 5135.60

way fire brigade Inlet connection with 63 mm dia.

stainless steel (SS304) instantaneous male inlets

with built in non return valve in each inlet with

mm dia. header pipe, suitable rubber cap and GI

chain including nuts, bolts, washers, gasket 3 mm

thick, etc. with all complete.

39 Supplying FIRE bucket round bottom of 9 liters 4.00 No 1027.12

capacity made out of 24 gauge G.I Sheet with extra

handle at bottom duly painted white inside and Red

out side with FIRE mark. Filled with dry-sand and

kept on existing stand provided or hung on wall

40 Supplying and erecting floor mounting Stand for 1.00 No 5563.55

keeping four nos. of FIRE buckets comprising

mm in length, 900 mm height frame made out of

30mm x 30 mm x 4 mm angle iron with cross

supports legs, welded with 4 hooks and duly painted

with one coat of primer and two coats of approved

enamel P O red paint.

41 Supply & installation of stainless steel body Orifice 10.00 No 1069.91

Plate of suitable inner bore along with matching

flange - as per specification & requirement as per

hydraulic calculation.

42 Providing and fixing approved make Perforated C 10.00 Mtr 471.67

type cable tray. Made from pre- galvanized sheet

steel. The cable tray should be bended as per IS

2062/1079 . with max 17.5% perforation with

coupler plate / Fish plate and GI hardware like nut -

bolt and washers etc. erected on existing support as

per Specification and as per instruction of engineer

in charge..(5) 300 X 50 X 1.5 mm Thick

43 Providing and fixing approved make Perforated C 10.00 Mtr 322.19

type cable tray. Made from pre- galvanized sheet

steel. The cable tray should be bended as per IS

2062/1079 . with max 17.5% perforation with

coupler plate / Fish plate and GI hardware like nut -

bolt and washers etc. erected on existing support as

per Specification and as per instruction of engineer

in charge..(3) 150 X 50 X 1.5 mm Thick

44 Supply, installation, testing & commissioning of 10.00 No 5435.17

Oblique pattern type stainless steel (SS 304) single

headed External Fire Hydrant Valve with 63 mm dia.

female instantaneous outlet conf. to IS: 5290, type -

A, including mating flanges, galvanised nuts,

galvanised bolts/studs, washers & gaskets 3 mm

thick with all complete.

Item Description of Item Quantity Unit Rate In Amount

45 Supply, installation, testing & commissioning of 63 10.00 No 1754.66

mm dia. stainless steel (SS 304) Universal Branch

Pipe conf. to IS:

46 Supply & installation, testing & commissioing of Fire 10.00 No 6967.29

Fighting Hose - conf. to IS : 636, type B (type- 3), The

fire hose shall be 15 m long with 63 mm dia. stainless

steel (SS 304) couplings conf. to IS: 903, at both the

ends for connection with the hydrant valve and the

47 Supply, installation, testing & commissioning of 10.00 No 2525.00

fabricated from 3 mm MS sheet, hose box of size-450

mm x 600 mm x 250 mm - painted with Fire Red as

per IS: 5, shade no. 536 front 3 mm thick transparent

glass with lock & key, handle and brass hinges - to

accommodate one number of 15 mtr long hose and

one number of universal branch pipe, including

supporting arrangement with civil work.

48 Supply, Installation, testing & commissioing of 10.00 No 7403.82

Swinging type mild steel hose reel drum with 20 mm

dia. x 30 mtr. rubber hose as per IS: 884. The

mounting stand shall be of mild steel and the hose

shall be fitted with a SS shut-off nozzle & SS ball valve

of 25 mm dia. including supporting arrangement

with all complete. accessories

49 Supplying, fixing & testing of of CI ball Valve 25mm 25.00 No 706.14

50 Supplying, fixing & testing of New Battery of diesel 1.00 No 15834.75

engine 150 Amp.

51 Supply and installation of Diesel Tank For Diesel 1.00 No 16690.67

Engine With All Accessories 100 Ltrs.

52 Supplying, filling & testing lube oil for diesel engine 20.00 Ltrs 320.98

53 Supply and commissioning of Oil Filter. 1.00 No 706.14

54 Supplying, filling of diesel in diesel engine tank 75.00 Ltrs 89.87

55 Supply and commissioning of Diesel Filter 1.00 No 427.97

56 Supplying, filling & testing coolant to engine cooling 20.00 Ltrs 239.66

57 Excavation for foundation upto 1.5 m depth including 10.00 Cu. Mtr 117.08

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter

lead.(A) Loose or soft soil

58 Filling Of Gaps Between pipe and Core Cutting Hole 45.00 No 299.58

With Chemical and Cement

59 Steel work, welded in built up sections framed work 200.00 Kg 90.48

including cutting, hoisting, fixing in position and

applying a priming coat of read lead paint & two coat

oil paint. (A)In beams and joists, channels angles

Tees, flats, with connecting plates or angle cleats as

in main and cross beams. Hip and jack rafters, purlins

conneted to common rafters and the like.

60 Supplying & erecting XLPE(IS:7098)(I)-88 ISI 25.00 Mtr 136.35

unarmoured copper cable 1.1 KV grade to be erected

as directed of following size. (E) 3 core 2.5 Sq. mm

for pressure switch

Item Description of Item Quantity Unit Rate In Amount

61 Providing and erecting XLPE(IS:7098)(I)-88 ISI 25.00 Mtr 285.83

armoured cable multistrand Copper conductor for

1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe at road crossing or floor of

following size of cable. (Only Fire Panel to Fire

Pump) (B) 3 core 4 Sq. mm

62 Providing and erecting XLPE(IS:7098)(I)-88 ISI 25.00 Mtr 497.93

armoured cable multistrand Copper conductor for

1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe at road crossing or floor of

following size of cable. (Only Fire Panel to Fire

Pump) (D) 3 core 10 Sq. mm (Only Fire Panel to Fire

63 Providing and erecting XLPE(IS:7098)(I)-88 ISI 25.00 Mtr 213.11

armoured cable multistrand Copper conductor for

1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe at road crossing or floor of

following size of cable for Diesel Engine Battery

Charger (A) 3 core 2.5Sq. mm

64 Supply, Filling and Fixing of approved make ABC type 12.00 No 1968.64

fire extinguisher - 6 Kg. Capacity as per IS:15683 &

65 Supply, Filling and Fixing of approved make CO2 type 12.00 No 5520.76

fire extinguisher. Capacity 4.5 Kg. (conforming to IS-

66 Supply, Filling and Fixing of approved make ABC 4.00 No 3423.73

Moduler type automatic fire extinguisher. Capacity

Kg. (conforming to IS-15683).

67 Submitting the application to obtain Fire Plan 1.00 No 202000.00

Approval and After Completion of Work Obtain Final

Fire NOC for 3 Year.

68 Supply, Installation and commissioning of Air 2.00 No 1412.29

Release Valve, 25 mm Dia. connection.

69 Supply, Installation and commissioning of Fire Alarm 1.00 No 35350.00

Panel Conventional type, 8 zone, with complete

70 Supply, Installation and commissioning of smoke 50.00 No 1027.12

detectors / heat detectors, with complete

71 Supply, Installation and commissioning of plug in 50.00 No 256.78

base for the smoke detectors, hooters, with complete

72 Supply, Installation and commissioning of Audio 8.00 No 1069.91

hooters , with complete accessories.

73 Supply, Installation and commissioning of Manual 8.00 No 1010.00

Call Points, with complete accessories.

74 Providing and erecting XLPE(IS:7098)(I)-88 ISI 1500.00 Mtr 176.75

armoured cable multistrand Copper conductor for

1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables (A)

2 core 2.5 Sq. mm for Fire Alarm System

75 Core cutting in wall and in RCC slab with size as 20.00 No 342.37

below: 50 mm dia. Hole

76 Core cutting in wall and in RCC slab with size as 8.00 No 427.97

below: 80 mm dia. Hole

Item Description of Item Quantity Unit Rate In Amount

77 Core cutting in wall and in RCC slab with size as 6.00 No 513.55

below: 100 mm dia. Hole

78 Core cutting in wall and in RCC slab with size as 6.00 No 599.15

below: 150 mm dia. Hole

79 Core cutting in wall and in RCC slab with size as 5.00 No 855.93

below: 200 mm dia. Hole

80 Supply, installation, testing & commissioning of ISI 1.00 Set 196445.00

approved electrical motor operated Kirloskar make

fire hydrant main pump set horizontal end suction

back pull out top discharge centrifugal fire pump set

with all the standard acessories, base frame,

coupling, and foundation bolts with following

Model -DB 80/26,

Motor Rating -30KW/40HP/3 ph

Suc x Del - 80 x

81 Supplying, installing, testing and commissioning of 1.00 Set 419150.00

Kirloskar make diesel engine driven fire hydrant

pump set, suitable for automatic operation and

consisting of horizontal type centrifugal end suction

back pull-out, top discharge pump with cast iron

body and bronze impeller, mounted on M.S.

fabricated common base plate with coupling,

coupling guard, foundation bolts and all necessary

accessories, complete as required. The pump shall be

of Model KFE, having a discharge capacity of

m³/hr at 70 meters head, driven by a 39 HP diesel

engine, 3 phase, with suction and delivery size of

82 Fire Hydrant Panel suitable for 10 HP Jockey Pump, 1.00 No 156045.00

40 HP (97 m³/hr @ 70 m head) Main Electrical Pump

and 39 HP (97 m³/hr @ 70 m head) Diesel Engine

Operated Pump, consisting of Incomer with MCCB (1

No.), R Y B Indication (1 Set) and VAF Digital Meter

(1 Set); Outgoing with F1 – 60 HP Star Delta Starter

for Main Pump, F2 – 10 HP DOL Starter for Jockey

Pump, F3 – Auto On/Off Diesel Pump with Battery

Charger, Control Circuit with Auto/Manual On/Off,

On/Off Trip Indication and On/Off Push Button;

Fabrication duly powder coated in PO Red Colour,

fabricated from 14/16 SWG GI Sheet with IP-42

Protection, fixed type floor mounted with bottom

cable entry, complete as required.

83 Pay Legal Fees to Concern Authority for Obtaining 1300.00 Sq.mt 10.10

Plan Approval and Final NOC

I/We am/are willing to carry out the work at………………….% above/below percent(Should be written in

figures and words) of the estimated rate mentioned above. Amount of my /our

Tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Item Description of Item Quantity Unit Rate In Amount

Deduct………% below Add………% Above

In words In words

The Contractor shall exhibit a board with detailed specification and details of work as directed by the

1 Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.:

PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C.

4 items where there is a change as per actual mix design the cost of difference of cement consumption

have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

5 GST will be paid Extra as per Govt. amendment

Deputy Executive Engineer Executive Engineer

City (R&B) Sub-Division Bharuch ( R & B ) Division

Bharuch Bharuch