CE CHZ/AMB/T-07/2019-20 PROVISION OF CHILDREN SCHOOL AT AMBALA

Amount

Schedule 'A'Section-I (Building Works)

Total amount of Schedule 'A' Section-I (Building Works)

Schedule 'A'Section-II (Site Devlopment,Clearance and Earth Works)

Total amount of Schedule 'A' Section-II (Site Devlopment, Clearance and Earth Works)

Schedule 'A'Section-III (Toe Wall Works)(ALONG NALLAH ONLY)

Total amount of Schedule 'A' Section-III (Toe Wall Works)(ALONG NALLAH ONLY)

Schedule 'A'Section-IV ( Internal Electrification Works )

Total amount of Schedule 'A' Section-IV ( Internal Electrification Works )

Schedule 'A'Section-V (Internal Water Supply Works)

Total amount of Schedule 'A' Section-V (Internal Water Supply Works)

Schedule 'A'Section-VI (Sewage Disposal Works and Shifting of Existing Sewage Line Works)

Total amount of Schedule 'A' Section-VI (Sewage Disposal Works and Shifting of Existing Sewage Line Works )

Schedule 'A'Section-VII (Area Drainage Works)

Total amount of Schedule 'A' Section-VII (Area Drainage Works)

Schedule 'A'Section-VIII (Road, Path,Hard Standing and Culvert Works)

Total amount of Schedule 'A' Section-VIII (Road, Path, Hard Standing and Culvert Works)

Schedule 'A'Section-IX ( Compound Wall and Gate Works )

Total amount of Schedule 'A' Section-IX (Compound Wall and Gate Works)

Schedule 'A'Section-X ( External Water Supply Works )

Total amount of Schedule 'A' Section-X (External Water Supply Works)

Schedule 'A'Section-XI (External Electric Supply Works)

Total amount of Schedule 'A' Section-XI (External Electric Supply Works)

Schedule 'A'Section-XII ( Fire Fighting Works )

Total amount of Schedule 'A' Section-XII (Fire Fighting Works)

Schedule 'A'Section-XIII (Telephone / Intercom / Lan Works )

Total amount of Schedule 'A' Section-XIII (Telephone / Intercom / Lan Works)

Schedule 'A'Section-XIV (Misc Items of Works) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col. 5 siginifies this fact only.

SITE DEVELOPMENT AND EARTH WORKS

ITEM NO 01: Bringing earth ( free from shrubs, vegetation etc) from out side MD land for and including forming embankments upto 3m height including raising (or lowering) earth, spreading in layers n exc 30cm thick; watering,ramming/rolling and finishing to required size, shape, etc. complete all as specified and directed by Engineer-in-Charge. NOTE : (i) For payment purpose, measurement of quanitity of earth filling after deduction of 5% shall be considered. (ii) Earth shall be approved by GE before filling in low lying area.

INTERNAL ELECTRIFICATION WORKS

ITEM NO 02 : Point wiring using approved colour coding as per IS, with stranded copper conductor 1.5 Sq. mm (nominal area), single core, ZHFR/HFFR, PVC insulated and unsheathed stranded cable 1100 volts grade, ISI-694 marked TEC and FIA approved in and including heavy duty, PVC concealed conduit, ISI marked, with and inluding mild steel sunken fabricated with 1.60mm MS sheet concealed in walls boxes suitable for switches / sockets etc with earth dolly duly painted with two coats of anti corrosive paint over a coat of red oxide primer internally, and covered with and including suitable plastic laminated sheet top cover 3mm thick fixed with cadmium plated iron screws for housing the switches, switch sockets outets, fan regulators etc including ZHFR/HFFR PVC insulated,unsheathed stranded copper conductor 1.5 Sq. mm nominal cross sectional area wire as earth continuity conductor upto common earth and connecting to common earth dolly complete all as specified and directed by Engineer-in-Charge for the following:-

2 (a) One Light/Fan/Bell point controlled by one switch 5Amp (light/fan/exhaust).

2 (b) Socket outlet, three pin, 5 Amp, on the independent board.

2 (c). Socket outlet, three pin, 5 Amp, on the same board with other switches.

2 (d) One light point controlled by two, 2 way switches.

ITEM NO 03: Point wiring (using approved colour coding as per IS) with 1100 volts grade, stranded copper conductor 2.5 Sqmm (nominal area), single core, ZHFR/HFFR, PVC insulated and unsheathed cable ISI 694 marked TEC and FIA approved in and including heavy duty PVC concealed conduit and its fittings, ISI marked, PVC junction boxes, mild steel terminal sunken boxes ( suitable for switches / sockets with earth dolly ) duly painted internally and externally with two coats of anti-corrosive paint over a coat of primer, covered with and including 3mm thick bakelite for suitable sizes make Hylam sheet, also including ZHFR/HFFR PVC insulated unsheathed stranded copper conductor 2.5 Sqmm (nominal area) 1100 volts grade, single core cable as earth continuity conductor to common earth and connected to earth dolly complete all as specified for socket point 15 amp.

ITEM NO 04: Sheet metal enclosure with socket plug top double pole and neutral enclosure with a two pin and earth plug and socket with one MCB SP 20 Amps, complete all as specified and directed. Make : (a) Hager cat part No VYA120C (b) Indoasian cat part No 811955 (c) Havells cat part No DHDPUSN020

ITEM NO 05: Sheet metal enclosure MCB DB, SPN, 240 volts, 8 way, double door type grouting in wall in CM, making good of disturbed surfaces and matching with existing and electrical connections complete all as specified and directed. Make : (a) Hager cat part No VYS08D (b) Indoasian cat part No 81826 (c) Havells cat part No DSSDBX0196

ITEM NO 06: Sheet metal enclosure MCB DB, SPN, 240 volts, 12 way, double door type grouting in wall in CM, making good of disturbed surfaces and matching with existing and electrical connections complete all as specified and directed. Make : (a) Hager cat part No VYS12D (b) Indoasian cat part No 81828 (c) Havells cat part No DSSDBX0197

ITEM NO 07: Sheet metal enclosure,loadline vertical DB, TPN 415 volts, 4 way, IP-43 protection suitable for incommer MCCB of 63 Amp,Double door type, grouting in wall in CM, making good of disturbed surfaces and matching with existing and electrical connections, complete all as specified and directed. Make : (a) Hager cat part No VYT04DH-P (b) Indoasian cat part No 811888 (c) Havells cat part No DHDLVDRWGO-F004

ITEM NO 08 : MCCB 4 Pole , 415 Volt , 50 Hzs, 63 Amps, 16 KA , complete all as specified and directed. Make :- (a) Indoasian cat Part No 830020 (b) Hager cat Part No HDA064Z (c) Havells

ITEM NO 09 : MCB SP, 230 Volt , 50 Hzs, 6 to 32 A, 10 KA , "C" series,complete all as specified and directed. Make :- (a) Havells cat Part No DHMGCSPF006-032 (b) Indoasian cat Part No 811122, 811124, 811126, 811127, 811128, 811129 (c) Hager cat Part No NCN106N,NCN110N, NCN116N, NCN120N, NCN125N,NCN132N

ITEM NO 10 : MCB SPN B Curve as incommer, 220 volt , 50 Hzs, 20 Amps, 10 KA , complete all as specified and directed. Make :- (a) Havells cat Part No DHMGCSNF006-032 (b) Indoasian cat Part No 811032 (c) Hager cat Part No NBN220N

ITEM NO 11 : MCB SPN, C Curve as incommer, 220 Volt , 50 Hzs, 32 Amps, 10 KA ,complete all as specified and directed. Make :- (a) Havells cat Part No DHMGCSNF006-032 (b) Indoasian cat Part No 81034 (c) Hager cat Part No NBN232N

ITEM NO 12 : MCB SPN B Curve as incommer, 220 Volt , 50 Hzs, 40 Amps, 10 KA , complete all as specified and directed. Make :- (a) Havells cat Part No DHMGCSNF040. (b) Indoasian cat Part No 811035 (c) Hager cat Part No NCN340N

ITEM NO 13 : Ceiling fan complete with accessories 230 V,1400 mm sweep as per IS-374: 2019, complete all as specified and directed. Make: Havells / Bajaj / USHA

ITEM NO 14 : Exhaust fan AC single phase 230/ 240 V of size 300 mm sweep 1400 RPM with louvers,complete all as specified and directed. Make: Havells / Bajaj / USHA

ITEM NO 15 : Sub-main wiring with 2 single core flame retardant PVC insulated and unsheathed cable with stranded copper conductor of 6 Sq mm drawing in & including heavy grade FRLS PVC Concealed conduit ISI marked of suitable size with all accessories on walls and making good of disturbed surfaces including all conduit fittings, clamps, gutties etc and one additional 1 run of wire of 6 Sq mm but green in colour for earth DBs and boxes with proper thimbles,complete all as specified and directed. (NOTE:-Two runs of cable ,1 run of earth wire & one run of PVC conduit shall be measured as one length.)

ITEM NO 16 : Sub-main wiring with 4 single core flame retardant PVC insulated and unsheathed cable with stranded copper conductor of 10 Sq mm drawing in & including heavy grade FRLS PVC Concealed conduit ISI marked of suitable size with all accessories on walls and making good of disturbed surfaces including all conduit fittings, clamps, gutties etc and one additional 1 run of wire of 10 Sq mm but green in colour for earth DBs and boxes with proper thimbles, complete all as specified and directed. (NOTE:-Four runs of cable ,1 runs of earth wire & one run of PVC conduit shall be measured as one length.)

ITEM NO 17 : LED tube light fitting , 1x18/20 W LED 230 V, energy efficent batten fitting, with driver etc complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible cable copper conductor including 18/20 watt LED tube rod, complete all as specified and directed. Make: (a) Havells E-LITE LED TRICA Series Cat partLHEXBYPNIN1W020 HPL Nepture silver series cat Part No HLPT51820PCGCW Jaquar sleek LED series cat part No LSLM01R018SW

ITEM NO 18 : LED tube light fitting , 2x18/20W LED 230v energy efficent Batten fitting, with Driver etc complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible cable copper conductor including 18/20 watt LED tube rod, complete all as specified and directed. Make : (a) C&S LED INDUSTRIAL BATTEN:CRUX-i SERIES Cat part LTIC00220WLED/WD (b) HPL LED legacy series cat part No HLPLEDWT8PC20(CW) (c) Jaquar Unilite series cat part No LUNI01X220XC

ITEM NO 19 : LED tube light fitting , 1x9/10 W LED 230v energy efficent Batten fitting, with Driver etc complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible cable copper conductor including 9/10 watt LED tube rod, complete all as specified and directed. Make : (a) Havells E-LITE LED TRIYCA Series Cat Part LHEXBYPNIN1W010 (b) HPL Nepture silver series cat part HLPT51509PCGCW (c) Jaquar cat part No LGLZ01X010XW

ITEM NO 20 : Bldg Security Light Pressure die cast housing with epoxy power coated dark graphite grey colour finish. Prismatic polycarbonate cover with individual LED lenses. IP65, 20 Watt Complete. Make :- (a) C&S Draco Series Cat Part No LTESS20WLED (b) HPL cat part No HPLLEDSL2060S (c) Havells cat part No ENDURAPEARLSL20WLED757SASYTOPC

SEWAGE DISPOSAL AND SHIFTING OF EXISTING SEWAGE LINE WORKS

ITEM NO 21 : Factory made heavy duty SFRC (steel fibre reinforced concrete) manhole covers with outer frame, 560 mm inner dia with mild steel rims all as specified and directed

ROAD, PATH, HARD STANDING & CULVERT WORKS

ITEM NO 22 : Painting lines, dashes, arrows, letters, etc on road pavements and the like exc 10 cm wide using machine with thermo plastic paint including glass beads, complete all as specified and as directed.

EXTERNAL WATER SUPPLY AND FIRE FIGHTING

ITEM NO 25 : CI sluice valve class PN 1.6, conforming to IS 14846-2000, suitable for 150mm bore of pipe, with iron wheel at top and brass spindle, flanged both ends including rubber joints, nuts, bolts gasket and washers and testing, complete all as specified and directed by Engineer-in-Charge.

ITEM NO 26 : CI sluice valve class PN 1.6, conforming to IS 14846-2000, suitable for 80mm bore of pipe, with iron wheel at top and brass spindle, flanged both ends including rubber joints, nuts, bolts gasket and washers and testing complete all as specified and directed by Engineer-in-Charge.

ITEM NO 27 : Foot valve 80 mm dia cast iron housing conforming to IS 4038 PN 0.2 alongwith all fixing arrangement and strainer and testing complete all as specified and directed by Engineer-in-Charge.

ITEM NO 28 : Construction of brick masonary valve pits of size 900 mm x 900 mm x 900 mm (internal dimension of chamber), depth of chamber to be recokoned from the top of PCC in foundation to top of MS cover as shown in drg with and including MS sheet cover fabricated from 3 mm thick MS sheet and frame of MS angle iron 40 mm x 40 mm x 5 mm with fixing arrangement hinges and locking arrangement and painting two coats of synthetic enamel paint over a coat of red oxide primer after preparation of surfaces on MS cover and frame including necessary excavation and earth work in any type of soil, returning, filling in approved soil, disposal of surplus soil to a distance not exceeding 50 metre, 150 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation, brick work using bricks as mentioned in PS clause 5.1 in cement mortar 1:6, 15 mm plastering in cement mortar 1:4 both internally and externally 30cm below GL, 100 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in flooring complete all as specified and directed by Engineer-in-Charge.

ITEM NO 29 : Construction of brick masonary valve pits of size 600 mm x 600 mm x 600 mm (internal dimension of chamber), depth of chamber to be recokoned from the top of PCC in foundation to top of MS cover as shown in drg with and including MS sheet cover fabricated from 3 mm thick MS sheet and frame of MS angle iron 40 mm x 40 mm x 5 mm with fixing arrangement hinges and locking arrangement and painting two coats of synthetic enamel paint over a coat of red oxide primer after preparation of surfaces on MS cover and frame including necessary excavation and earth work in any type of soil, returning, filling in approved soil, disposal of surplus soil to a distance not exceeding 50 metre, 150 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation, brick work using bricks as mentioned in PS clause 5.1 in cement mortar 1:6, 15 mm plastering in cement mortar 1:4 both internally and externally 30cm below GL, 100 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in flooring complete all as specified and directed by Engineer-in-Charge.

ITEM NO 30 : Supplying, fixing, jointing and testing non-return valves, cast iron body as per IS 5312, heavy duty both ends flanged suitable for 150mm bore pipe, complete all as specified and directed .

ITEM NO 31 : Supplying, fixing, jointing and testing non-return valves, cast iron body as per IS 5312, heavy duty both ends flanged suitable for 80mm bore pipe, complete all as specified and directed ,complete all as specified and directed.

ITEM NO 32 : Ductile iron fittings such as bends (any type, radius and angle) tapers any type (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch, 'Y' junction, double branch, cross (all sockets or socket and spigot) collars, tail pieces with one end flanged (integrally cast) and one end socket/spigot caps and plugs suitable upto 150 mm bore ductile iron pressure pipes of K-9 classification and push on flexible rubber gasket joints complete all as specified..

ITEM NO 33 : Supply, install, test and commission factory assembled and tested, electric motor driven pump set, comprising of heavy duty, end draw out type, single stage centrifugal pump, cast iron body with broonze impellor, casing ring, sleeves etc coupled to electric motor of suitable capacity by means of flexible coupling and mounted on a common fabricated MS base frame. The scope of work also includes the foundation of the pump set, without star delta starter, (as per manufacturer's recommendations including MS bolts with nuts and anti vibrating pads. The scope of work also includes the following :- (a) Pump capable of delivering 500 ltrs per minute at 30 metre head, coupled through flexible coupling to TEFC squirrel cage inductor motor 1500 rpm (synchronous speed) of capacity as recommended by manufacturer (but not less than 7.5 HP). (b) GI suction pipe 80 mm bore, heavy grade of suitable length but not less than 7 metre and taper connecting piece. (c) GI delivery pipe 80 mm bore, heavy grade of suitable length but not less than 2 metre and taper connecting piece. (d) Complete header for delivery of water with suitable size of pipe.

ITEM NO 35 : Booster pump for 440V, 3 phase, 50 Hz conforming to IS-12469:1988 with CI casing bronze impeller and stainless steel shaft mounted on heavy duty bearings suitable for 440V, 3 phase, 50 Hz 30 m head, 450 LPM discharge(Not less than 20HP) incl suitable header for delivery complete all as specified and directed.

ITEM NO 36 : Fire hydrant valve single head outlet of 63 mm dia of size conforming to IS 5290 with all fitting such as reducer, short piece, flange etc including making a branch connection of 20mm dia bore nozzle short, complete all as specified and directed.

ITEM NO 37 : Fire extinguisher CO2 type capacity 4.5 Kg,complete all as specified and directed.

ITEM NO 38 : Hose box of size 800mmx600mmx250mm made of MS sheet 18 gauge, double door with 4 mm thick glasses and door frame made of 16 gauge MS sheet, painted fire red outside and brilliant white inside complete all as specified and directed by Engineer-in-Charge.

ITEM NO 39 : Hose reel of 20 mm dia and 30 mtr length conforming to IS 5132,complete all as specified and directed.

ITEM NO 40 : Inferential water meter for pumping and distribution mains ISI marked, horizontal dry dial type, 150 mm dia, both ends flanged, cast iron body to read in metric system (ie litres) provided with strainer in the body and suitable plastic transparent sheet for sight complete all as specified and directed

EXTERNAL ELECTRIFICATION WORKS

ITEM NO 42 : Supply and laying factory made unreinforced precast concrete cable cover, class HV, type 1 flat size 300mm x 180mm x 40mm for protection of HT cable laid flat length wise prependicular to the axis of cable, complete all as specified and directed by Engineer-in-Charge.

Item No 43 : Supply, installation, testing and commissioning of 250 KVA outdoor transformer, plateform mounted , 11 KV on HT side and 433 volts on LT side at no load step down 3 phase 50 c/s AC double wound oil immersed naturally cooled with external cooling tubes core type. Transformer with off load tapping on HT side to vary secondary voltage +- 7.5% in steps of +-2.5 %. The transformer shall confirm with the requirement of IS-2026 and oil shall confirm to IS-335,1983. The temp rise shall not exceed 55 degree centigrade in winding and 45 degree centigrade in oil when measured by the resistance method after continous full load run and on ambient temp of 48 degree centigrade, copper wound, (losses shall be as per IS-1180 Part I 2014 level 3 ), complete all as specified and directed by Engineer-in-Charge. The transformer shall include the following:- (a) Plateform for Transormer of size 3mx2.5mx1.2m including security fencing alround with provn of one MS angle iron gate of suitable size all as directed by GE (b) HV Bushing of suitable size. (c) LV glands and cable box of suitable size. (d) Oil conservator. (e) Dehydrating breather with first fill of dehydrating agent. (f) Thermometer pocket with thermometer dial of suitable size.

Item No 43 (contd.) (g) Two Earthing terminals on tank and tank cover with lugs to suit 32x6 mm GI strip. (h) Rating Plate. (i) Terminal marking plate. (j) Oil level gauge. (k) Oil drain and filter valve. (l) Lifting lugs (m) Four plain rollers. (n) Oil filter plug with connection complete. (o) Extra bushing for neutral outside the cable box for providing independent earthing. (p) Oil filling hole with cap. (q) First filling of oil. (r) One cable box on LV side with one cable gland suitable for reception of 01 No 3.5 core 400 sqmm LT cable.

ITEM NO 44 : Supply ,install, testing and commissionig of power factor improvement static condensor (cap bank) of capacity 70 KVAR (4 x 5+2x7.5+2x10+1x15) including interconnection with LT panel of size 1200mmX1000mmX600mm, indoor type factory made ,weather proof ,dust and vermin proof (IP55) suitable for 1100 volts grade 3 phase 50 HZAc suuply floor mounted ,fabricated out of 14 SWG MS sheet welded on 40x40x6 mm angle iron frame /base of appropriate size and having four numbers angle iron legs made out of 40x40x6mm ,60 cm long angle iron below frame with front door and back opening having locking arrengement pre-wired with copper conductor PVC insulated cable /extension strip and connected with suitable size thimbles ,lugs duly embedded in ground in P:C:C: 1:3:6 of suitable size including locking arrengement suitable for mounting with required sheet metal enclosure ,thimbles,all as specified and directed by Engineer-in- charge and all electric incomming and outgoing connection with PVC insulated multi stranded copper wire of suitable size and PVC flexible conduit medium quality as required comprising of the following:- (a) Insulated bus bar of copper of suitable Amps capacity for three phase , and one for neutral of suitable size with suitable incomer MCCB microprocessor release, adjustable type and Capacitor bank or manufacturer's standard design, complete all as specified and as directed.

ITEM NO 45 : Supply ,install, testing and commissioning of air break gang operated switch triple pole mechanically operated outdoor type with all fittings/accessories mounted on and incl 11 KV HT porcelain insulator and steel channel frame,GI operated rod 25 mm dia of suitable length with operating mechanism worked from ground level,vertically operated incl locking arrangement for operating handle with and incl 7 lever lock with three Keys Navtal Make complete with dropout fuse assembly consisting of 12 insulators suitable for current rating of 200 Amps HT 11 KV working pressure all as specified and directed.

ITEM NO 46 : HT lightening arrestors non resistance type for out door use complete with all fittings and fixing arrangement,transmission class discharge 65 KA, suitable for 11000 Volts incl brackets, clamps,nuts,washers and connecting to earth wire 4mm dia GI wire complete all as specied and directed.

ITEM NO 47 : Supply and errection of steel tubular swaged poles 11 mtr long, type -410 SP-55 confirming to IS 2713 applying 2 coats of aluminium paint over a coat of red oxide primer externally above ground level and a coat of anti-corrosive paint below ground level and marking with alternate white and red paint strip 30 cm wide-total 05 Nos with synthetic enemal paint complete with and including provision of MS base plate, final taper plug bolts, nuts, screws, drilling works including numbering to poles, erected & fixed in vertical position, complete all as specified and directed by Engineer-in-Charge. Note :- Excavation, PCC in foundation/plinth block/ coping cross arms, bracings, clamps etc will be measured and paid for separately.

ITEM NO 48 : Supply and errection of steel tubular swaged poles single swan neck, 09 mtr long, type -410 SP-31 confirming to IS 2713 applying 2 coats of aluminium paint over a coat of red oxide primer externally above ground level and a coat of anti-corrosive paint below ground level and marking with alternate white and black paint strip 30 cm wide-total 05 Nos with synthetic enemal paint complete with and including provision of CI base plate, final taper plug bolts, nuts, screws, drilling works including numbering to poles, erected & fixed in vertical position complete all as specified and directed by Engineer-in-Charge. Note :- Excavation, PCC in foundation/plinth block/ coping cross arms, bracings, clamps etc will be measured and paid for separately.

ITEM NO 49 : Supplying, laying in trenches, jointing, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cable (Heavy duty) with aluminium conductor 11000 Volts grade earthed, cross sectional area 95 Sqmm 3 core laid in trenches/inducts/along poles or passing through protection pipe wall etc complete all as specified and directed by Engineer-in-Charge. (Note: Excavation, earthwork, sand cushioning, cable covers, pipe for cable protection will be measured and paid for separately)

ITEM NO 50: BLANK

ITEM NO 51 : Cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 Sq mm complete all as specified and directed.

ITEM NO 52 : LED Street light luminaries 45 watt aluminum pressure die cast housing with touched glass cover (IP-66 protection) complete with all fixing arrangement all as specified and directed. Make: Cat part No LSRT01S045XC of jaquar/Cat Part No HPLLEDSL4560E of HPL/Cat Part No PE-11-D-L-45XOA of Pyrotech

ITEM NO 53 : LED post top lantern copper dust painted cast aluminium spigot, spun aluminium canopy with clear acrylic cover light fitting including 25 watt LED lamp or strip and suitable dia of GI pipe for mounting the fitting, prewired complete with all accessories. Make : Pyrotech cat part No PE-13-D-L-25X00A /Cat Part No HPLLEDPCR35W of HPL/Cat Part No HLPT-06-25-CW of Helonix

ITEM NO 54: Junction Box of size 300mmx250mmx150mm with locking arrangement suitable for aluminium bus bar (04 Nos.) fixed on porcelain base insulator & 01 No MCB SP, 06A. Junction box made out of 2 mm thick MS sheet, painted with 2 coats of synthetic enamel paint over a coat of red oxide primer complete with suitable size of cable glands & MS clamps nuts, bolts & washers etc complete all as specified and directed.

ITEM NO 55 : Supplying, laying and testing XLPE insulated galvanized steel strip armoured cable of size 400 Sqmm 3.5 core,1100 volts aluminium conductor heavy duty laid in trenches, fixing along the poles, passing through pipes or laid under floor through protection pipe, walls etc jointing and testing of cross sectional area complete all as specified and directed by Engineer-in-Charge (Note : Earthwork, Sand Cushioning, Cable covers, pipe for cable protection will be measured and paid for separately).

ITEM NO 56 : Supplying, laying and testing XLPE insulated galvanized steel strip armoured cable of size 120 Sqmm 3.5 core,1100 volts aluminium conductor heavy duty laid in trenches, fixing along the poles, passing through pipes or laid under floor through protection pipe, walls etc jointing and testing of cross sectional area complete all as specified and directed by Engineer-in-Charge (Note : Earthwork, Sand Cushioning, Cable covers, pipe for cable protection will be measured and paid for separately).

ITEM NO 57 : Supplying, laying and testing XLPE insulated galvanized steel strip armoured cable of size 50 Sqmm 3.5 core,1100 volts aluminium conductor heavy duty laid in trenches, fixing along the poles, passing through pipes or laid under floor through protection pipe, walls etc jointing and testing of cross sectional area complete all as specified and directed by Engineer-in-Charge (Note : Earthwork, Sand Cushioning, Cable covers, pipe for cable protection will be measured and paid for separately).

ITEM NO 58 : Supplying, laying and testing XLPE insulated galvanized steel strip armoured cable of size 35 Sqmm 3.5 core,1100 volts aluminium conductor heavy duty laid in trenches, fixing along the poles, passing through pipes or laid under floor through protection pipe, walls etc jointing and testing of cross sectional area complete all as specified and directed by Engineer-in-Charge (Note : Earthwork, Sand Cushioning, Cable covers, pipe for cable protection will be measured and paid for separately).

ITEM NO 59 : Supplying, laying and testing XLPE insulated galvanized steel strip armoured cable of size 16 Sqmm 4 core,1100 volts aluminium conductor heavy duty laid in trenches, fixing along the poles, passing through pipes or laid under floor through protection pipe, walls etc jointing and testing of cross sectional area complete all as specified and directed by Engineer-in-Charge (Note : Earthwork, Sand Cushioning, Cable covers, pipe for cable protection shall be measured and paid for separately).

ITEM NO 60 : Supplying, laying and testing XLPE insulated galvanized steel strip armoured cable of size 10 Sqmm 2 core,1100 volts aluminium conductor heavy duty laid in trenches, fixing along the poles, passing through pipes or laid under floor through protection pipe, walls etc jointing and testing of cross sectional area complete all as specified and directed by Engineer-in-Charge (Note : Earthwork, Sand Cushioning, Cable covers, pipe for cable protection shall be measured and paid for separately).

ITEM NO 61 : Cable route indicator showing "MES HT U / G cable 11 KV / MES LT U / G cable" (all words embosed) on route of cable with arrow made of CI in suitable eliptical shape and fixed on 25 X 4 mm angle iron not less than length of 700 mm and embeded in and including PCC Block of size 30X30X60 cm in ground including using necessary use and waste of formwork complete all as specified and directed.

ITEM NO 62 : Earthing complete with galvanized steel earth plate electrode 600x600x6mm surrounded by mixture of charcoal and salt in alternate layers burried directly in ground vertically in a pit of depth not less 2.25mtr below ground level with top edge of earth plate at a depth of not less than 1.50mtrs below ground level connected with and including 32x6mm galvanized iron strip as earthing lead by means of bolts, nuts, check nuts and washers made out of galvanized iron, 20mm dia medium grade GI pipes for watering with funnel, wire mesh and 40mm GI light grade protection pipe for GI strip and including necessary excavation, earth work, PCC 1:3:6 type C-2 concrete pit and RCC pit cover charcoal and common salt filling in alternate layers complete all as specified and directed by Engineer-in-Charge on electrical plate no-3 of SSR Par-I of 2009. Note : The unit rate includes for protecton pipe and GI earth strip from top of earth plate upto 7.50 metre above ground level.

ITEM NO 63 : Earthing complete with and including galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm surrounded by a mixture of charcoal and salt in alternate layers burried directly in ground vertically in a pit of depth not less than 2.25 m deep below ground level with top edge of earth plate at a depth of not less than 1.5 m below ground level, connected with and including galvanised iron or steel earth wire, 4mm dia (No. 8 SWG) by means bolts, nuts, check nuts and washers made out of galvanised iron, 15 mm bore (light grade) GI pipe for protection of earthing lead, 20 mm bore (light grade) GI pipe for watering with funnel, wire mesh and including necessary excavation and earth work, PCC 1:2:4 type B-1 pit and 50 mm thick RCC M-25(Design mix) reinforced with XPM (weight not less than 3 kg/sq m) pit cover, C.I frame, charcoal and comman salt filling in alternate layers, complete all as shown and specified in electrical plate No. 3 of SSR Part-I (2009) complete all as specified and directed by Engineer-in-Charge. Note : The unit rate includes for protecton pipe and GI earth wire from top of earth plate upto 7.50 metre above ground level.

Item No 64 : Supply, installation, testing and commissioning weather and vermin proof L.T panel factory fabricated CPRI appvoved indoor type totally enclosed of size not less than 1500mmX1500mmX600mm made out of 2.0 mm thick sheet metal with angle iron frame of M.S. angle 50x50x6 mm suitable for operation on 3 phase 4 wire, 440 volts 50 HZ system, with hinged panel doors (covers) on two sides with handles, bottom gland plate and locking arrangement consisting of sufficient Nos of circular cable entry holes at bottom only with suitable PVC/rubber /wooden bushes to prevent ingress of water/vermin etc, inside the enclosure, the required nos of holes to be fixed with chromium plated brass cable glands for cable entry and exit complete with necessary internal wiring with stranded copper conductor PVC insulated cables of adequate size, duly powder coated internally/ externally of approved colour with PCC foundation and aluminium bus bar for 3 phase & neutral mounted on epoxy insulator-01 Set including comprising the following:- (a) Aluminum bus bar 800 Amps cap 4 wire fixed on insulator not less than 1.0 mtr long -1 set (b) MCCB , 4 pole 400 amps, Icu=100%Ics, having microprocessor based release for over current,short circuit & earth fault with display and fault discrimination 35 ka -01 (incoming) (c) MCCB ,4 pole 200 amps, Icu=100%Ics, having microprocessor based release for over current,short circuit & earth fault with display and fault discrimination 35 ka -02 (out going for main school bldg) (d) MCCB ,4 pole 100 amps, Icu=100%Ics, having microprocessor based release for over current,short circuit & earth fault with display and fault discrimination 25 ka -02 (to DG set panel for fire fighting and pump house, 01 spare)

Item No 65 : Supply, installation, testing and commissioning weather and vermin proof L.T panel factory fabricated CPRI appvoved outdoor type totally enclosed of size not less than 1200mmx1200mmx600mm,made out of 3.15 mm thick sheet metal with angle iron frame of M.S. angle 50x50x6 mm suitable for operation on 3 phase 4 wire, 440 volts 50 HZ system, with hinged panel doors (covers) on two sides with handles, bottom gland plate and locking arrangement consisting of sufficient Nos of circular cable entry holes at bottom only with suitable PVC/rubber /wooden bushes to prevent ingress of water/vermin etc, inside the enclosure, the required nos of holes to be fixed with chromium plated brass cable glands for cable entry and exit complete with necessary internal wiring with stranded copper conductor PVC insulated cables of adequate size, duly powder coated internally/ externally of approved colour with PCC foundation and aluminium bus bar for 3 phase & neutral mounted on epoxy insulator-01 Set including connecting the following (panel A&B for school bldg) :- (a) Aluminum bus bar 400 Amps cap 4 wire fixed on insulator not less than 1.0 mtr long -1 set (b) MCCB , 4 pole 160 amps, Icu=100%Ics, having microprocessor based release for over current,short circuit & earth fault with display and fault discrimination 35 ka -01 (incoming)

Item No 67 : Supplying installation testing and commissioning of Eco friendly, silent diesel engine driven generating set of 30 KVA or nearest higher capacity at 0.8 power factor, 415 volts AC, 3 phase, 50 Hz, 4 wire, directly coupled alternator and engine, water cooled comman base platform with floor mounted fuel tank and auto main failure system including all civil work such as excavation, PCC foundation, anti-vibration pads/dampers including standard control panel as per manufacturer's instructions and other accessories comprising of following :- (a) ENGINE : Eco friendly for emmission and noise (CPCB NORMS COMPLIANCE) 4 storke diesel engine as per manufactures design confirming to BS standard developing BHP not less than 50 BHP, 1500 RPM, turbocharged after cooling complete under NTP condition with a provision for 10% over load for one hour on 12 hours running with the following : (i) Fly wheel with starter ring for generating set (ii) Dry type air filter (iii) Lube oil cooler assembly with accessories (iv) Exhaust air manifold (v) Exhaust silencer (vi) Expansion bellow

(b) ALTERNATOR : Brushless type suitable for direct coupling to engine, self excited, self regulated with fast response thyristor type electronic automatic voltage regulator for output voltage within desired limits (+1%). Dynamically balanced 415volts AC, 3 phase, 50 Hz, 4 wire, 0.8 PF lagging 30 KVA (24 KW) or nearest size on higher side, 1500 RPM, star connected (4 wire) screen protected drip proof enclosures, air cooled with radial fan mounted on rotor with insulatiopn class F/H all as per BS-2613, IS 4722 with following accessories :- (i) One MS frame suitable for mounting of engine and alternator (ii) One fuel tank of suitable capacity for 8 to 12 hrs continuous running complete with fuel gauge, inlet/outlet connections, drain plug etc to be mounted suitabkle on angle iron frame or grouted on wall as per manufacturer's instructions (iii) One No 12 volts DC battery of suitable AH SMF type with copper leads and terminal lugs of suitable size (iv) One set of AVM pads fitted on base frame (v) One hand rotary type fuel pump connected with heavy duty pipe upto the tank (vi) Adequate ventilation to meet air requirement for combustion and heart removal with a provn of blower (vii) Emergency stop push button outside the container (viii) Provn of light inside the conopy providing a FTL fitting

Item No 67 (contd.) (c) FOUNDATION : Cost of PCC foundation as per manufacturer's design/instructions included in the cost of gen. set. (d) Supplying, installing, commissioning and testing of Accoustic enclosure suitable for DG shall be as under :- (i) Fabricated out of CRCA sheet of suitable thickness. Polyester based powder coated internally and externally with lockable type door handle. All nuts, bolts and hardware are zinc coated. (ii) Sheet metal components are hot dip seven tanks pretreated. (iii) The doors are gasketed with EPDM gaskets. (iv) Sound proofing with high quality rock wool/ mineral wool confirming to TS 8183 of 50 mm thickness and density at 96 kg/M3 covered with fibre glass cloth and perforated powder coated sheet. Specially designed attenuators (sound controller) at air entry and exit of the container. Noise level shall not exceed 75 dBA at 1 m distance as per CPCB norms (v) Adequate ventilation to meet air requirement for combustionand heat removal. MAKE:-(a) ENGINE:-Kirloskar/Crompton Greaves/Leland Cummins. (a) ALTERNATOR :-Kirloskar Green/Crompton Greaves/Jyoti.

CONDUIT FOR TELEPHONE / INTERCOM / LAN

Item No 69 : Socket outlet RJ 45 piano flush type ISI marked with valid CML No including metal flush box 25mm depth complete all as specified.

Item No 70 : Socket outlet RJ 11 piano flush type ISI marked with valid CML No including metal flush box 25mm depth complete all as specified.

SUMMER AND WINTER APPLIANCES

Item No 71 : Supply, installaion, testing and commissioning of water cooler partially stainless steel elctric driven single phase having approx storage and nominal cooling capacity 60/120 ltrs complete all as specified and directed.

Item No 72 : Supply and installation of voltage stabilizer single phase naturally air cooled indoor type for input variation 170V to 250V with output voltage stabilized of 230Volts and of capacity 2 KVA complete all as specified and directed.

Item No 73 : Zero B, RO System of capacity 25 ltrs incl all fixing arrangement and other necessary items complete all as specified and directed Make : KENT, AQUAGUARD, LIVPURE.

Total amount of Schedule 'A' Section-XIV

SKYLARK INDUSTRIES

M/s Kataria Construction Company

ENGINEER CONSTRUCTION PVT. LTD.

H.P. CONSTRUCTION CO.

B S Ranbir and Co

Global Enterprises

J.D.Builders

SAR AGENCIES

BANSI BUILDER AND CONTRACTORS PVT LTD

M/s DMR Builders Pvt Ltd

GEMINI PROMOTERS AND BUILDERS PVT. LTD.

M/s Jatindra Construction Company