SPECIAL REPAIRS TO INTERNAL ROAD FROM QM OFFICE TO OR LINE IN ASC BN AND INTERNAL ROAD TO DEPOT AREA IN DOU AT RAJOURI UNDER GE 862 EWS

Amount

Surface dressing not exc 15 cm deep and getting out in soft / loose soil on uneven surface of natural ground / road side berm, filled up area,and removing vegetation, scrapping high patches and filling in low patches with the scrapped soil to given an even and neat look as in road side berm. complete all as specified & directed.

Scarifying or picking graveled, macadam or bituminous macadam surface in area not exceeding 400 Sqm and depth exceeding 50mm and not exceeding 100mm deep, complete all as specified.

Screening road metal, Chippings, etc. on the site of the work, when specially ordered, including removing screened materials clear of screen and stacking in separate heaps for measuring (Materials from both sides of screen measured), complete all as specified.

75 mm thick (compacted thickness) WBM, with lime stone, sand stone, flint or quartzite coarse aggregate of grading 2(63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to required gradient and camber with 8 to 12 tonne power roller, complete all as specified.

75 mm thick (compacted thickness) WBM, with seviceable coarse aggregate of grading 2(63 to 40mm size) or of grading 3 (50 to 20mm size), obtained from srl item No-2 above spread, rolled and consolidated to required gradient and camber with 8 to 12 tonne power roller, complete all as specified.

Preparing existing black top bituminous surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with mechanical air blower to remove all loose dirt/foreign materials and applying evenly a priming tack coat with bituminous primer (Viscosity Grade Paving Bitumen of Grade VG-30) at the rate of 5 Kg per 10 Sqm of surface laying bituminous premix asphaltic semi dense concrete 30 mm consolidated thickness with 5.5 % binder content by weight of total mix and 4% stone dust conforming to specification for filler as per IRC-95, 1987 (filler) prepared in hot mix plant, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and using with 8 to 12 tonne power roller, complete all as specified and as directed.

Preparing unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with mechanical air blower to remove all loose dirt/foreign materials and applying evenly a priming tack coat with bituminous primer (Viscosity Grade Paving Bitumen of Grade VG-30) at the rate of 10 Kg per 10 Sqm of surface, laying bituminous premix asphaltic semi dense concrete 40 mm consolidated thickness with 5.5 % binder content by weight of total mix and 4% stone dust conforming to specification for filler as per IRC-95, 1987 (filler) prepared in hot mix plant, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and using with 8 to 12 tonne power roller, complete all as specified and as directed.

Premix bituminous macadam with broken stone graded aggregate with 4% of paving bitumen binder of viscosity grade VG-30 grade by weight of total mix (Consolidated thickness 75mm or less), laid / rolled and compacted to required gradient and camber using power roller 8 to 12 tonne, complete all as specified and directed.

Repair to pot holes not exceeding 30mm depth, not exceeding 01 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming, and applying evenly a priming tack coat with cationic emulsion at the rate of 3.5 Kg per 10 Sqm of surface, putting in & including bituminous premix asphaltic semi dense concrete 25 mm thick (Viscosity Grade Paving Bitumen of Grade VG-30) consolidated thickness with 5.5 % binder content by weight of total mix and 4% stone dust conforming to specification for filler as per IRC-95, 1987 (filler) prepared in hot mix plant, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and rolled with 8 to 12 tonne power roller, complete all as specified and as directed.

Marking lines, dashes arrows etc of any description not less than 10cm width/girth on road surface using hot applied thermo plastic road marking paint mixed with radium glass beads @ 250 gms/Sqm with automatic machine(min thickness of marking paint 3mm) to provide reflectivity and night vision (approximate temperature being 200° Celsius at the time of laying) including cleaning the surface by removing all dirt, dust & all other foreign matters, demarcation at site and traffic control, complete all as specified & directed.

Road Stud/ cat eye of size100mm x 100mm x 19 mm made out of ABS materials casted dynamically designed very high impact strength and fitted with 02 Nos highly reflective reflectors each on both side & provided with zinc plated nail of 12 mm dia and length 120 mm for fixing to road by hammering fixed in repairs, complete all as specified and directed. Model : No-DA 978(P) of Dark Eye or equivalent inGreenlite/Road star / Gogia plastics.

Repair to pot holes any depth, not exceeding 01 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming (including supply of road metal), complete all as specified and as directed.

Delinators size 700mm x 50mm x 100mm round body fitted with 02 Nos 100mm dia highly reflective reflectors made of PMMA and mounted on MS pipe of 50mm dia duly painted with powder quoted anti rust & anti theft steel net in yellow/white colour, vertically embedded in plain cement concrete 1:2:4 type B1 using 20 mm graded crushed stone aggregate of block size 30 cm x 30 cm x 30 cm including necessary earth work and removing surplus soil to a distance nexc 50 mtr fixed in repairs, complete all as specified and directed by Engr in Charge. Cat part No-DA-952 GP of make- Dark Eye or equivalent inGreenlite/Road star / Gogia plastics.

Solar road studs 125mm x 125mm x 25mm made out from aluminium alloy and construction, Solar powered by monocrystle panel & type of batery- One high capacity Ni-Cd rechargeble battry with view distance approximate 1000 mtr LEDs 0-10mm, 3 pieces each side and total 6 pieces are used for high brightness of different colour with back up hours of continuous lights at night fixed in repairs, complete all as specified and direcrted. Cat part No-DA 110-DHRUV of make- Dark Eye or equivalent in Greenlite/Road star / Gogia plastics.

aamir farooq bhat

NATIONAL TRADING COMPANY

Ravinderpal Singh

MOHD TAJ

M/S KHAN ENTERPRISES