Renovation of sanitary system, Joinery works at various JPD bldgs. In Bundi circle (Year2025-26 and 2026-27)

P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: Size 580x440mm. (S-1.2.2)

P & F European type white glazed vitreous china 1st quality W.C pan (IS : 2556 Mark) with P or S trap including cutting and making good the wall and floor .(S/1.3)

P & F water closet Seat Covers with brass hinges complete :Solid PVC (IS 2548 marked) grade-I White for EWC. .(S/1.7.2)

Labour charges for removing W.C. pan (any type) of all sizes with care including all necessary fittings P or S trap..(S/1.9)

P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete.Flat Back (small) size 456x355x265mm. (S-1.14.1)

P & F W.V.C. Urinal Partition Plate of approved standard make of size 630x315mm including making good the wall. (S-1.15)

Labour charges for removing and refixing of urinals (all type & sizes) including all necessary fittings.(S/1.19)

P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556 mark) of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball (IS: 1703 mark) complete including cutting and making good the wall:. PVC with PVC bend and superior internal fittings as per IS : 7231 ..(S/1.20.3)

Removing and re-fixing of wash hand basin including all necessary fittings. (S/1.33)

P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the wall :: Size 550 mm x 400 mm.(S/1.36.3)

1.0 mm thick stainless steel AISI -304 & IS 13983-1994 kitchen sink of approved make as per Engineer-in-charge with large waste coupling..Overall size (inches) 18 x 16 x 6 Bowl size(inches) 16x14x6( S-1.38.9.1)

P& F waste Pipe with all fitting:P.V.C with PVC nut 32 mm.(S/1.43.2)

P & F Looking Mirrors with P.V.C. frame of approved make as per direction of Engineer-in-charge : Size 500x400mm (S-1.45.1)

P & F Towel Rail or Ring of approved quality/make: C.P. brass Towel Rail elbow type with concealed screws size 450mm (Heavy duty).(S-1.47.1)

P & F Grating of approved quality/make:Stainless Steel Sheet size 125mm dia.(S/1.48.1)

P & F Soap Dish or Tray of approved quality/make C.P. brass (S-1.52.1)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1 metre spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Internal work Exposed on wall)

(A) 15 mm nominal size. (S/2.37.1)

(B) 25mm dia. Normial size. (S/2.37.3)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,)

(A) 15 mm nominal size. (S/2.38.1)

(B) 25mm dia. Normial size. (S/2.38.3)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge.(External work).

(A) 15mm dia. Normial size. (S/2.39.1)

(B) 25mm dia. Normial size. (S/2.39.3)

Making connection of G.I. distribution branch with G.I. main including all fitting. (A) up to 25mm dia (S/2.3.1)

P & F Pilllar Cocks (IS :8931 : 1993 Mark) of superior quality and approved make:C.P. Pillar cock, 15 mm dia nominal bore.(S/2.6.1)

P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make:

(A) heavy duty PVC 15mm nominal bore.(S/2.7.2)

(B) CP Brass bib cock 15mm nominal bore. (S/2.7.3)

P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete :: Brass wt. Not less than 400gm,20mm.(S-2.11.2)

P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. Inlet connection 15mm.Brass (IS : 8931 marked)(S 2.12.1)

P & F 15 mm. Dia Connection Pipe of approved quality/make :PVC pipe with C.P. Brass nuts upto length, 300mm(S-2.13.1)

P & F Flush Cock / Flush Valve (IS : 9758 Mark) for WC of approved quality make : Brass / Gun metal Half-turn wt. 1 Kg. of approved quality / make, 25mm nominal bore.(S/2.14.9)

P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make :

(A) Gun metal 15mm nominal bore (S/2.15.1)

(B) Gun metal 25mm nominal bore (S/2.15.3)

P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design:

(A) 300 litre capacity. Hoisting Charges for each floor :For items 2.26.1 to 2.26.4 (S/2.26.2 + S/2.27.1)

(B) 500 litre capacity.Hoisting Charges for each floor :For items 2.26.1 to 2.26.4(S/2.26.3 + S/2.27.1)

Labour Charges for Removing & Refixing the water Storage Tank of all sizes and including all Necessary fitting complete in all respect as per approved sample and direction of engineer in charge..(S/2.41)

Providing and fixing superior quality PVC Tank Cover complete as per approved by Engineer In Charge.

(A) 300 Lt. capacity (S/2.44.1)

(B) Above 500 Lt. Capacity (S/2.44.3)

Providing, Laying & Jointing R.C.C. class NP-2 Non-Pressure pipes (IS : 458mark) of approved make with collars, jointed with C.M. 1:2 or having Spigot and socket ends with flexible rubber rings joint including testing of joints etc. complete :

(A) 300mm dia Internal. (S/3.8.5)

P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant.

(A)110 mm dia (S/3.16.3)

(B )160 mm dia (S/3.16.4)

Providing & Laying C.C. 1:3:6 (Stone Agreegate 20mm nominal size) all around PVC Pipe including 7.5 cm thick bed concerte [Width & Height = Dia of Pipe in CM+15CM] excluding cost of Pipe & Excavation of trenches etc.

(A)PVC pipe 110 mm dia(S/3.16.5.1)

(B)PVC pipe 160 mm dia(S/3.16.5.2)

P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant:

(A) Bend 87.5. 110mmdia(S/3.17.9/(II))

(B) Bend 45. 110mmdia(S/3.17.8/(II))

(C )Coupler (Soket) 110mmdia. (S/3.17.1/(II))

(D)Pipe clip.110mm dia.(S/3.17.15/(ii))

(E)VENT Cowel .110mm dia.(S/3.17.12/(ii))

(F )PLAIN TEE 110mmdia. (S/3.17.3/(ii))

Raising manhole cover and frames slab to required level including dismantling existing slab and making good the damage as required (raising depth of manhole masonry to be paid separately).Rectangular manhole 90x60 cm..(S/3.18.1)

Construction of manhole in all type of soil inner size 90 X 60 Cm. 300 mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5:10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring, making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C. flooring, Cement cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead..Depth up to 0.5 M(S-3.19.1)

Construction of soakage well in all type of soil with 300 mm thick dry masonry, top and bottom 300 mm course in CM 1:6, 80mm thick stone slab, jointing of slab in CM 1 : 3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C flooring , earthwork complete as per approved drawing including disposal of earth within a lead of 50 mtr.::Size 240 Cm. dia outside & 240 Cm. depth.(S-3.22.3)

Construction of septic Tank in all types of soil with 40 Cm .thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 grade C.C floor & RCC slab covering with M15 grade c.c. floor, 50 mm thick stone slab partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos stone foot rests of approved design ,two No. 450 mm dia each Ferro cement cover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr:- - Size 200x100x130 cm.(for 10 users) with 115 mm thick RCC (M-20) slab with Tor steel reinforcement 8mm ϕ @15 cm c/c bothways including shuttering complete in all respect.(S-3.27.1)

Emptying of Septic tank ,Soakage well etc. by disposing or sludge upto 5 Km. lead & taking out sewage including cleaning of site. .(S-3.28)

Mechanised Cleaning of sewer line of diameter upto 200mm with the help of trolley mounted electrical driven machine having flexible steel springs of length 20ft. Each which are rotated with the help of electric motor and clutch assembly(S/3.53)

Mechanised Cleaning and desilting of manhole/sewer line chambers With the help of mechanical bucket which gets open and close through levers:depth upto 0.5 mtr.(S/3.55.1)

Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar):Extra for using size above 200x300mm in glazed tiles and for using 400mm x 400mm MAT finished tiles in place of 300mm x 300mm size...(B-7.12+7.15)

Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4).(B-7.13)

Excavating trenches of required width for pipe cables, etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 Mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposal of surplus excavated soil as directed within a lead of 50 Mtr.: All kinds of soil: Pipes cables, etc. exceeding 80mm dia but not exceeding 300mm dia.(B/1.10.2)

Repair of door, window shutters including cost of MATERIAL and LABOUR for change of damaged :(B/13.33)

(A) Panel by Shuttering Ply - 9mm thick (Commercial) (bi)

(B)Panel by Wire Gauge 14 mesh x 24 gauge(biii)

(C)Aldrop of mild Steel 12" long x12mm dia(ci)

(D) Stopper of Aluminium with Double Rubber Gutka (dii)

(E) Steel Hinges For Wooden Chowkhat 4" size(fiii)

(F)Steel Locking Bolt (hi)

(G) Steel Handle 6" size (iII)

Labour charges for repair to door / window without using any material such as applying randha (finishing) tightening of bolts & screw etc.(B-13.24)

Repair of existing steel glazed doors, windows and ventilator, MS sheet door, garge doors, compound wall gates etc. by welding drilling complete include. Cost of welding rods and hire charge of welding meachine and TP etc complete (B-13.23)

Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 market using phenol formal dehysresin in glue both side with approved steel bildding complete as pr annexure A,30 mm thick commercial vernier both side. (B-8.13.2.1)

Extra for providing external lipping with 2nd class teak wood battens 6 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) Over item no. 8.13. (B-8.14)

Applying priming coat:With ready mix pink or gray primer of approved brand and manufacture on wood work hard and soft wood. (B-12.45.1)

P & F M.S. Sheet 1mm thick single leaf door shutter in angle iron frame 35 x35x5 mm suitablly diagonally braced with 25 x 3 mm flat iron above & below lock rail of size 50x5 mm beading extra including all fittings, as per direction of Engg. Incharge but excluding cost of chowkhats: including two coat of anti-corrosive red oxide primer paint. (B-9.17)

Painting with synthetic enamel paint of approved brand and manufacture to give and even shade : (A) Two or more coats on new work. (B-12.46.1)

Please Enable Macros to View BoQ information