Material Supply For MGNREGS Work Ward 9

Amount

MATERIAL SUPPLY FOR MGNREGS WORKS

Quarry Waste

Stone Aggregate(single size): 40 mm nominal size

Stone Aggregate(single size):20 mm nominal size

Stone Aggregate(single size): 10 mm nominal size

Stone Aggregate(single size): 06 mm nominal size

Coarse sand (zone III)

Fine sand (zone IV)

Royalty for good earth

Royalty for sludge

Portland Cement

Through and bond stone size 24 x 24 x 39cm

Stone for masonry work

Twisted steel/deformed bars

Solid blocks of size 40x20x20cm

Solid blocks of size 30x20x20cm

Solid blocks of size 40x20x15cm

Solid blocks of size 30x20x15cm

Solid blocks of size 40x20x10cm

Hollow blocks of size 40x20x20cm

Hollow bloks oof size 40x20x15cm

Hollow bloks oof size 40x20x10cm

Red oxide Zinc chromate primer

Mild steel tubes hot finished welded type

Welding by electric plant

Galvanised steel J or L hooks 8 mm dia

Bitumen washer

G.I. Plain washer thick

Precoated Aluminium Trafford sheet 0.450mm thick

GI trafford profile sheet 0.35mm thick

Mild Steel round bar above 12 mm dia

Average rate of mild steel round bars for reinforcements

Mild steel plates

Double clip (bridge clip)

Single clip

M.S. Tube 40 mm dia

Binding wire

Galvanised wire mesh of average width of aperture 1.4 and nominal dia. of wire 0.63 mm

Wire nails

Wire mesh (rabbit)

Mangalore ridge tiles 20 mm thick

Mangalore tiles 20 mm thcik

PVC pipe 63 mm outer dia . 6kgf/cm2

PVC pipe 63 mm outer dia. 4 kgf/cm2

PVC pipe 110 mm outer dia 6kgf/cm2

PVC pipe 110 mm outer dia. 4kgf/cm2

PVC Elbow 63 mm dia

PVC 45 degree Elbow 63 mm dia

PVC door Elbow 63 mm dia

PVC bend 63 mm dia

PVC Tee 63x63x63 mm dia

PVC door Tee 63 x63x63mm dia

PVC vent cowl 63 mm dia

PVC end cap 63 mm dia

PVC Socket/coupling 63 mm dia

PVC Reducer 63x50 mm dia

63 MM PVC Ball valve

Material - 75 mm MTA

Material - 75 mm valve

Structural steel such as tees, angles, channels and R.S. joists

G.I. pipes 15 mm dia

G.I. pipes 20 mm dia

G.I. pipes 25 mm dia

G.I. pipes 32 mm dia

G.I. pipes 40 mm dia

G.I pipes 50 mm dia

G.I. pipes 65 mm dia

G.I. pipes 80 mm dia

Galvanised steel corrugated sheets

Galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots

Roofing paint for iron sheets in red colour

Solvent

Polyethylene water storage tank with cover and suitable locking arrangemnet

Flats up to 10 mm in thickness

Mild steel round bar 12 mm dia and below

200 mm Aluminium aldrop

300 mm Aluminium aldrop

PVC corrugated roofing sheets

PVC plain roofing sheets

Stainless steel screws 50 mm

Stainless steel screws 40 mm

Stainless steel screws 30 mm

Stainless steel screws 20 mm

Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe)

Factory made door frame size 50x47 mm with wall thickness 5 mm made of single piece extruded profile

35 mm thick factory made solid panel PVC door shutter of single piece extruded profile non decorative finished (Matt finished)

Powder coated M.S. butt hinges 100 mm X58 mm X 1.9 mm

Bright finished or black enameled mild steel screws 40 mm

Bright finished or black enameled mild steel screws 20 mm

100 mm S.C.I. trap with vent heel

White Vitreous china 10 lit. (full flush) capacity controlled low level flushing cistern with all fittings

PVC pipe 20 mm outer dia 10 kfg/cm2

G.I Limpet washer

Green Net 75% shade

GI Chicken mesh ( 24 guage 12.5x12.5mm)

MUHAMMED KUNJU.U